Toote kirjeldus inglise keeles:The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs!
Der laufruhige 120-mm RGB LED-Lüfter von Argus bietet mit seinen 18 RGB LEDs einen stylischen Effekt und leuchtet zudem noch satt den Innenraum des Gehäuses aus. Gummierte Auflagen in den Lüfterecken, auf beiden Seiten des Lüfters, sorgen für einen vibrationsfreien Betrieb und lassen die Option offen, ob der Lüfter kühle Luft ansaugen oder die warme Luft aus dem Gehäuse pusten soll. Der Anschluss erfolgt über einen 4pin PWM-Anschluss am Mainboard und wird zusätzlich noch am 12V RGB-Header des Mainboards angeschlossen, welcher für die synchronen Farbwechsel aller angeschlossenen Komponenten zuständig ist.
The None Chamfer PETG Link Tube in transparent by Bitspower is made of polyethylene terephthalate, PETG for short. This material is a plastic and is used, for example, for PET bottles. Its strength lies in its high break resistance, easy heatability and high stability. In order to implement them in the system, it is necessary to bend them into shape with heat and cut them to size. As a rule, the None Chamfer does not need to be reworked when it is cut. The tube measures 50cm in length, 14mm in outer diameter and 11mm in inner diameter. Only the EML series from Bitspower is compatible as connections. Technical Data: Material: PETG Color: Transparent Outer Diameter: 14 mm Inner Diameter: 11 mm Length: 50 cm Compatibility: EML series Bitspower connectors only
The None Chamfer PETG Link Tube in transparent by Bitspower is made of polyethylene terephthalate, PETG for short. This material is a plastic and is used, for example, for PET bottles. Its strength lies in its high break resistance, easy heatability and high stability. In order to implement them in the system, it is necessary to bend them into shape with heat and cut them to size. As a rule, the None Chamfer does not need to be reworked when it is cut. The tube measures 50cm in length, 12mm in outer diameter and 10mm in inner diameter. Only the EML series from Bitspower is compatible as connections. Technical Data: Material: PETG Color: Transparent Outer Diameter: 12 mm Inner Diameter: 10 mm Length: 50 cm Compatibility: EML series Bitspower connectors only
With the “Eisbaer”, Alphacool is fundamentally revolutionizing the AIO cooler market. Where traditional AIO CPU-coolers are disposable products which are neither upgradeable nor refillable, the Alphacool “Eisbaer” is modularly built and can be upgraded, rebuilt or refilled at any time. This means that the “Eisbaer” is not only an AIO, but also fully built on classic water cooling components. That means it isquieter and more powerful than the average AIO solution.RadiatorAlphacool depends on a radiator made of pure copper. The base of the radiator is the popular Alphacool NexXxoS series, which is well-loved around the world. The pure copper construction raises the cooling performance enormously compared to the usual aluminium radiators used in classic AIOs. The slight thickness of the fins ensures enormous cooling power in fans with low rotational speed. This ensures that the performance of the “Eisbaer” when adjusting the fans down decreases much more slowly than in radiators with higher fin thickness.HosesThe flexible PVC hoses make installing the “Eisbaer” easy. These hoses are easier to arrange and move into the right position. So the hoses don’t bend and stop the flow of the water, both hoses have been fit-ted with anti-kink springs. The 11/8 mm size is also a standard in the water cooling field, alongside the 13/10 and 16/10.Quick-lock closureThe “Eisbaer” was designed with expandability directly in mind. This is why you’ll find a quick-lock closure on one of the hoses. This quick-lock mechanism is compatible with Alphacool HF quick-lock closures (1010383, 1010394, 1010395, 1010442), with which the circuit can easily be expanded to include anything from a radiator to a graphics card cooler. Furthermore, the “Eisbaer” is compatible with the upcoming Alphacool GPX-Pro graphics card AIO, which will use identical quick-lock closures.FansAlphacool's Core is a quiet and efficient fan with a wide control range up to 2500 rpm. The via PWM signal controllable fan is particularly well suited for radiators. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation.ConnectorsAll connectors are based on the classic G1/4 inch thread, the standard thread in the water cooling field. This way, all attachments can be switched out for others any time as desired. This also means that, for example, you could later decide to switch to thicker hoses or even HardTubes and set your system uniquely apart. All these features make the “Eisbaer” cooler into something extraordinary. Its enhanced appearance from the illuminated logo and the illuminated reservoir, which also contains the pump, lets the interior of your PC shine in a whole new way. The soft-touch surface of the pump case is a further visual highlight. PumpsThe basis of the pumps is the Alphacool DC-LT 2 Ceramic, also available separately. The pump runs extremely quietly and can be regulated to between 7 and 12V. It can also be regulated through the motherboard. If the “Eisbaer” is being run alone, the 7V setting will still have next to no performance loss, as shown in diverse test results. The insulated pump case further perfects the noise generation and ensures that vibrations are almost completely absorbed. The smooth and shiny polished copper base of the cooler ensures optimal heat absorption and can relay the heat over the fine slit structure of the cooler to the water quickly and efficiently. With the “Eisbaer”, you get an all-around perfect product that is not only extremely high-powered but also works very quietly.Notice for expansionPlease take care not to mix up the IN and OUT ports. On the “Eisbaer”, the “outlet” is marked in “red” and the “inlet” in “blue”. On the components to be connected, it is the opposite. The coupling with the “blue” marking denotes the “outlet” and the coupling with the “red” marking is the “inlet”. This is important as in many coolers the flow direction is crucial for optimal cooling performance.Note on applicationPlease use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well. Compatibility:AMD: 754 / 939 / 940 / AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / C32 / FM1 / FM2 / FM2+ / G34Intel: LGA 1150 / LGA 1151 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755 Technical Details Pump (Alphacool DC-LT 2 2600 Ceramic)Speed2600 RPMVoltage6-13.5V DCPower consumption3,2WMaximum flow rate72 L/hMaximum head1 mhose length30 cmTechnical Details FansFansCoreBearinghydraulic BearingVoltageDC 12VPower connector4-Pin PWMRated Speed0 - 2500 rpm ±10%Max. Air Flow72.63 CFMMax. Static Pressure2.42 mm/H2O
With the two matt black holders from Bitspower it is possible to install the complete series of D5 pump, D5 top and Z tube reservoir in the case. The mounting kit is compatible with the D5-Top and the 2D5-Top and can therefore be used as an extension or replacement. Technical Data: Colour: Matt Black Compatibility: D5-TOP, 2D5-TOP
The compact aquarium pumps for use under water The EHEIM compactON aquarium pump is characterized by its name through a compact design and is thanks to the included accessory bag appropriate for versatile use – the EHEIM compactON 2100-5000 can also be modified for the use outside of the water. Thanks to the high quality material it is also possible to use them without problems in marine water. For even more flexibility, the flow rate is adjustable for all models, except for the EHEIM compactON 5000. Advantages of the EHEIM compactON Successor of the compact and compact+ series Fastening by means of robust suction cups Including accessories such as suction basket and threaded coupling Silent due to ceramic bearing (EHEIM compactON 2100 and EHEIM compactON 3000) High pump performance at low power consumption compactON 5000 as electronic version for more efficiency Technical Details: Pump power per hour at 50 Hz: of 400 l Pump power per hour at 50 Hz: to 1000 l Pumping head at 50 Hz approx. (H max): 1.4 m Power at 50 Hz: of 15.00 watt Dimensions (WxHxD) 47 x 79 x 73mm Hose Ø pressure side: 16mm voltage 230 volt Frequency 50 Hz Standard power plug EUR Freshwater yes Sea water yes Manual in multiple languages (DE, FR, EN) Manual in multiple languages (ES, IT, PT, NL)
The Kaze Flex RGB PWM series combines the award-winning technology of the Kaze Flex fans with an optical revision and RGB LEDs. The all-black frame and decouplers emphasize the translucent fan blades illuminated by eight LEDs. A 4-pin 12V RGB connector allows regulation by standard RGB controllers. Thanks to an additional pass-through plug, several fans can be chained together. The outstanding performance of the Kaze Flex range remains untouched. The Sealed Precision FDB bearing ensures a service life of more than 120 000 hours. Three performance levels offer an individual solution for every application. A regular RGB fan version is also available. Technical Details Dimensions: 120 x 120 x 27 mm Fan Speed: 300 - 1200 ± 10% rpm Noise Level: 4.0 - 24.9 Airflow: 16.6 - 51.17 CFM = 28.2 - 86.9 m³/h Static Pressure: 0.0763 - 1.05 mmH²O | 0.75 - 10.3 Pa Voltage: 12 V Amperage: 0,09 A / 0,13 A / 0,40 A Amperage LED: 0,40 A / 0,40 A / 0,40 A Power Input: 1,08 W / 1,56 W / 5,52 W Weight: 140 g Connector: 4-pin, 4-pin 12V RGB Accessory: Molex-Adaptor, 4x screws Bearing: Sealed Precision Fluid Bearing MTTF: 120.000 Hours (25°C)
Eight RGB LEDs arranged in a ring around the fan motor create a continuous, powerful illumination through the translucent fan blades. The LEDs are powered via a standard 4-pin RGB cable and can be controlled directly via the common 12V systems from various motherboard manufacturers. Compatible with RGB systems such as ASUS Aurora Sync, ASRock RGB LED, MSI Mystic Light Sync, and Gigabyte RGB Fusion, among others. To offer high quiet operation and long service life, the fans from the Kaze Flex series use a closed-loop liquid bearing (Sealed Precision FDB). The bearing and the spindle are made entirely from high-quality, compressed metal and are lubricated by a special oil film that is resistant up to 250 °C. This drastically reduces friction, ensuring high quiet operation and reduced wear, resulting in an average service life of 120,000 hours. The Kaze Flex RGB fan series is equipped with vibration- and shock-damping rubber pads on the non-tunneled screw holes. These isolators effectively prevent the transmission of any vibrations and contribute to quiet operation. A generously sized, sleeved 50 cm connection cable, as well as a cable for RGB control including an additional pass-through connector, enable installation in almost any system. The Kaze Flex RGB fan series is available in three performance levels and offers an individual solution for every application area. Alternatively, an RGB PWM variant is also available.
The Alphacool Cape Coolplex reservoirs have been well-known and popular on the water cooling market for years!But even such great products can sometimes use an update to fulfill even the most recent demands. Hence we at Alphacool have let the old series run out and now introduce the new series with POM end pieces as “LT” and now even with solid metal end pieces as the “Copper Edition”. Of course the tubes are made from high-grade Plexiglas which has proven itself with safe operation in many cooling systems for many years!The changes made are subtle but very well thought through:Besides the new materials and surface finishes the top piece of the reservoirs is now equipped with an additional thread, making them great for installation of a Fillport. Additionally the reservoir can now also be installed horizontally! The riser tube is now removable for applications where the top of the reservoir is used as an inlet.A nice side effect: Now even more lighting modules can be installed for beautiful lighting effects.To round off the new concept the screw plugs on all versions now have an elegant polished copper surface finish!For maximum compatibility all threads are G1/4” in size. The proven transparent mounts are now also included again for almost invisible mounting. Make your PC a piece of art with the new Cape Coolplex reservoirs! Technical specifications: Material: POM, PlexiHeight: 100mmDiameter: 50mmConnection threads: G1/4"Weight: 264gExtent of delivery:Reservoir2x Mounting clamps 2 x G ¼" Screw plugsPlease note: For mounting additional screws are needed. We recommend ordering item No. 46023 with this reservoir. This product has been reviewed for you:HardwareoverclockOcreviews (PT)
DEMCiflex Dust Filter 92mm Round Black/White DF0489Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 92 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. This is very simple in many ways. Firstly, it is easy to see if cleaning is necessary again - as soon as the white filter fabric has a gray haze, you should do this task. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Finally, a few notes on the installation: First, the question arises, which fans have to be covered at all. As already mentioned, this applies exclusively to the sucking fans. But which are they? The safest way to recognize this is on the fan itself, with two arrows on the outside of the fan frame. If one of the two arrows points towards the interior, it is an aspirating fan. These are usually located on the front, side and bottom, whereas the rear and cover fans usually carry the air out of the housing and therefore need not be filtered. In order to maximize the filter effect, an overpressure in the housing can be generated. This means that more volume of air is forced into the housing than is being sucked out of the housing by other fans at the same time. This prevents air (and with it the dust) from entering the interior through other openings that may not have been filtered. If all fans are the same size, you should blow more fans into the housing than pull out. In this case, the power supply is to be counted as an additional, extracting fan, as long as it does not receive its supply (fan side) directly from the outside (occurs at floor mounting). If different fans with different sizes and speeds are used, the respective air volumes (m³ / h) in the data sheets give a good reference value, whereby in turn the total volume of the suction fans must be higher than that of the blowing out fans. Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate. Figure 4 shows an example configuration on a housing (not included). As can be seen, the use of LED fans is possible because the transparent material hardly hampers the lighting. Technical details:Size (frame): Ø approx. 110 mmSize (filter): Ø approx. 85 mmCompatibility: 92 mm fan slotMaterial (filter): polyester meshColor: black (frame), white (filter)Mounting: magnetic bracket + mounting frameAdvantages: Fast installation No compatibility restriction Easy and quick cleaning Effective filter effect with high air permeability Durable fabric
Alphacool's fitting series is future-oriented and characterized by excellent workmanship. The inside scoop closes absolutely tight, thus preventing further escape of liquid. On both sides all 1/4“ connections with a maximum thread length of 6mm can be screwed. This ball valve is available in two different color versions: Chrome and Black Nickel. Technical Details: Dimensions (LxWxH): 35,4 x 36 x 22,7mm Color: Black Nickel Scope of delivery: Alphacool 2-way ball valve G1 / 4 - Black Nickel
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This manifold is very practical and offers many advantages thanks to its innovative design: Barely any thread length restrictions, almost no flow resistance and mounting possibilities are aplenty. Technical specifications:Material: Brass, chromatizedColour: Deep Black Dimensions: Length: 30mmWidth: 21mmHeight: 21mm Extent of delivery:1 x Alphacool HF 3-way connection terminal G1/4 inner thread - Deep Black This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This angled adaptor is a true multi-talent. Revolvable in two places, it can cover all angled up to 90°. Alternatively it can be used to displace a connection thread for maximum fitting compatibility or other needs. Technical specifications: Material: Brass, chromatizedColour: Deep Black Dimensions:Length: 52,2mmWidth: D18,1mmHeight: 25mm Extent of delivery:1x Alphacool angled adaptor double 45° revolvable G1/4" outer thread to G1/4" inner thread - Deep Black Reviews:Xtremesystems.comPT-Reviews.pt
This G1/4 Inch screw plug can be used for many applications. So you can use it for the radiator, reservoir and some other components. Alphacool have this plug screw in 2 different colors: Chrome and Deep Black. Thus you can now bring your modding project in a uniform color to shine . Technical specifications: Material: Brass Colour: Deep Black Thread size: G1/4 Inch Height without thread: 4,25mm Top diameter: 18mm Extent of delivery: 1x Alphacool Screw with O-Ring G1/4 Inch - Deep Black
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Model: Screw PlugThis screw plug fits in all ¼” openings. The screw thread is kept short and presents no danger of being screwed in too far. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Diameter: 18mm Height: 9.5mm Scope of Delivery: 1x Alphacool Eiszapfen screw plug G1/4 - deep black
EK-Quantum Magnitude Accent - Black is an interchangeable aesthetic inner frame for EK's new Magnitude water block. This black accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation. This Magnitude accent is made of anodized aluminum. Available in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude CPU water blocks Made in Europe - Slovenia!
The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market. Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs! Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years. Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop. Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length. Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport. Versatility is the essence of the new NexXxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price. Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins. Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted. These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions. Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical specifications: Material internal: Mostly copper Material casing: Side panels steel, threads brass, copper chambers Colour: Black Dimensions (LxWxH): 400x124x46mm Radiator size: 3x120mm Connection threads: 6x1/4“ Mounting thread size: M3 Pressure tested: 1.5bar Weight: 1515g Download 3D-file (.stp) Extent of delivery: 1x Radiator 4x screw plug 12x M3x30mm hexagon socket screw 12x M3x35mm hexagon socket screw This product has been reviewed for you: martinsliquidlab.org (engl) Hardwaremax Xtremesystems (engl) (Userreview) Coolingtechnique (it) Coolingtechnique (engl) Effizienzgurus Hardwareluxx (User review "bundymania") Xtremesystems (engl.) (User review "bundymania") Awardfabrik HardwareLuxx hardwaremAx Tweak (DK) ComputerBase m4gic Xtremehardware (it.)
The HardTube Project is becoming a reality. Alphacool is setting out on a new path and making great strides! Before now, the most common approach to water cooling was to use normal PVC tubes – now Alphacool is offering a new way to configure your water cooling system. The HardTube variants bring more order into your system, which gives off a more structured impression. The newest are the brass tubes, available in black chrome and chrome, as well as acrylic tubes, carbon, and borosilicate glass. With their fitted connectors and simply-designed functionality, they can be connected to each other with an absolutely tight seal. The PETG-tubes can be bent with the appropriate bending tools in order to fit into any system easily, without needing any additional angled pieces. In order to install the tubes into the system, they need to be sawn to the correct length. PETG tubes can be bent at lower temperatures than acrylic and are generally more flexible and easier to handle. Technical Details: Material: PETG Length: 60cm Scope of delivery: 1x Alphacool Eisrohr 13/10mm PETG 60cm - 4pcs
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute!The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing!With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items.Functionality of this connector:A double nipple with two 1/4“ outer threads is very useful for the extension of fittings or connection of components with an inner thread to a manifold or similar components with an inner thread,Technical specifications:Material: Brass, chromatizedColour: deep BlackDimensions:Length: 4mmWidth: D18mmExtent of delivery:1x Alphacool double nipple G1/4 outer thread to G1/4" outer thread with O-ring - deep blackThis product has been reviewed for you:Xtremesystems (Userreview) (engl.)PT-Reviews (pt)
AiO-Wasserkühlung im 240-mm-Format von Alphacool, mit ARGB-Lüftern, variable Pumpleistung, mit Schnellverschlüssen zur einfachen Aufrüstung, kompatibel zu aktuellen AMD & Intel Sockeln
