Jahutid ja lisad

With the Crystal Link Tubes, Waku specialist Bitspower presents a very interesting solution for water enthusiasts who are not completely unskilled in their craft. These are solid tubes of acrylic plastic, which can be cut by the user to the required length and bent with the aid of a heat source suitable. The resulting possible connection of the individual water cooling parts with longer dead straight sections and exactly curved radii is a visually appealing alternative to the traditional connection by means of hoses dar. For example, if you use a hot air gun and the acrylic tube heated with it for some time, the material is so soft that one It can easily bend into the desired radius and holds as long until the acrylic has cooled and the now bent tube hardens again. It does not get any more individual Everything you need can be created here and even adjusted later. Ideally, in addition to a hot air gun and gloves you have a silicone rod (or something similar flexible, but heat-resistant) to hand, which one pushes into the tube in advance, so that the soft tube gets no kink when bending. The transparent-blue Crystal Link Tube offered here has an outer diameter of 12 mm and an inner diameter of 10 mm. The length is 100 cm. It can be used in conjunction with bit-power adapter fittings from the C47, C48 and ML series. Technical details:Material: acrylic glass (PMMA)Colour blueOuter diameter: 12 mmInner diameter: 10 mmLength: 1,000 mmCompatibility: C47 Series Bit Power Fittings and Adapters C48 Bit Power Fittings and Adapters C48 Series Bit Power Fittings and Adapters

Supermicro MCP-290-00053-0N mounting kit

SuperMicro FAN-0124L4

With the “Eisbaer”, Alphacool is fundamentally revolutionizing the AIO cooler market. Where traditional AIO CPU-coolers are disposable products which are neither upgradeable nor refillable, the Alphacool “Eisbaer” is modularly built and can be upgraded, rebuilt or refilled at any time. This means that the “Eisbaer” is not only an AIO, but also fully built on classic water cooling components. That means it isquieter and more powerful than the average AIO solution.RadiatorAlphacool depends on a radiator made of pure copper. The base of the radiator is the popular Alphacool NexXxoS series, which is well-loved around the world. The pure copper construction raises the cooling performance enormously compared to the usual aluminium radiators used in classic AIOs. The slight thickness of the fins ensures enormous cooling power in fans with low rotational speed. This ensures that the performance of the “Eisbaer” when adjusting the fans down decreases much more slowly than in radiators with higher fin thickness.HosesThe flexible PVC hoses make installing the “Eisbaer” easy. These hoses are easier to arrange and move into the right position. So the hoses don’t bend and stop the flow of the water, both hoses have been fit-ted with anti-kink springs. The 11/8 mm size is also a standard in the water cooling field, alongside the 13/10 and 16/10.Quick-lock closureThe “Eisbaer” was designed with expandability directly in mind. This is why you’ll find a quick-lock closure on one of the hoses. This quick-lock mechanism is compatible with Alphacool HF quick-lock closures (1010383, 1010394, 1010395, 1010442), with which the circuit can easily be expanded to include anything from a radiator to a graphics card cooler. Furthermore, the “Eisbaer” is compatible with the upcoming Alphacool GPX-Pro graphics card AIO, which will use identical quick-lock closures.FansAlphacool's Core is a quiet and efficient fan with a wide control range up to 2500 rpm. The via PWM signal controllable fan is particularly well suited for radiators. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation.ConnectorsAll connectors are based on the classic G1/4 inch thread, the standard thread in the water cooling field. This way, all attachments can be switched out for others any time as desired. This also means that, for example, you could later decide to switch to thicker hoses or even HardTubes and set your system uniquely apart. All these features make the “Eisbaer” cooler into something extraordinary. Its enhanced appearance from the illuminated logo and the illuminated reservoir, which also contains the pump, lets the interior of your PC shine in a whole new way. The soft-touch surface of the pump case is a further visual highlight. PumpsThe basis of the pumps is the Alphacool DC-LT 2 Ceramic, also available separately. The pump runs extremely quietly and can be regulated to between 7 and 12V. It can also be regulated through the motherboard. If the “Eisbaer” is being run alone, the 7V setting will still have next to no performance loss, as shown in diverse test results. The insulated pump case further perfects the noise generation and ensures that vibrations are almost completely absorbed. The smooth and shiny polished copper base of the cooler ensures optimal heat absorption and can relay the heat over the fine slit structure of the cooler to the water quickly and efficiently. With the “Eisbaer”, you get an all-around perfect product that is not only extremely high-powered but also works very quietly.Notice for expansionPlease take care not to mix up the IN and OUT ports. On the “Eisbaer”, the “outlet” is marked in “red” and the “inlet” in “blue”. On the components to be connected, it is the opposite. The coupling with the “blue” marking denotes the “outlet” and the coupling with the “red” marking is the “inlet”. This is important as in many coolers the flow direction is crucial for optimal cooling performance.Note on applicationPlease use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well. Compatibility:AMD: 754 / 939 / 940 / AM2 / AM2+ / AM3 / AM3+ / AM4 / AM5 / C32 / FM1 / FM2 / FM2+ / G34Intel: LGA 1150 / LGA 1151 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 / LGA 755 Technical Details Pump (Alphacool DC-LT 2 2600 Ceramic)Speed2600 RPMVoltage6-13.5V DCPower consumption3,2WMaximum flow rate72 L/hMaximum head1 mhose length30 cmTechnical Details FansFansCoreBearinghydraulic BearingVoltageDC 12VPower connector4-Pin PWMRated Speed0 - 2500 rpm ±10%Max. Air Flow72.63 CFMMax. Static Pressure2.42 mm/H2O

The Arctic thermal pads are ideal for efficiently exchanging heat between different components. Thanks to the high quality of workmanship and excellent thermal conductivity, the pads are used in many places on computers and electronic components. The thermal pad, which is based on silicone and a special filler, far outperforms generic and performance-oriented pads. In a test by PC Games Hardware (11/2018), the "excellent processability and reusability in every respect" was praised. In combination with the fair price and good performance, our thermal pad was recommended as a "price-performance tip". Thanks to its low hardness and good compression properties, the thermal pad acts as a perfect gap filler and easily bridges uneven surfaces and air gaps. The ARCTIC Thermal Pads are non-adhesive and can therefore be placed precisely. Installation is child's play and therefore perfect for beginners. The pad contains no metal particles, is electrically insulating and not capacitive. Handling is therefore safe since contact with electrical parts does not lead to damage. Technical specifications: Dimensions 290 x 290 mm Contents 1 piece Thickness 0.5 mm Thermal conductivity 6.0 W / mK Hardness 25 shore 00 Relative density 3.2 g / cm³ colour blue Operating temperature -40 ~ 200 ℃ Volume resistance 1 X 1012 Ω-cm Interruption voltage 12 KV / mm Draw resistance 2.5 Kgf / cm² Elongation 45% Dielectric constant 14.1816 ε at 60 Hz 13.0264 ε at 1K Hz 13.0264 ε at 1M Hz Flammability V-0

The Arctic thermal pads are ideal for efficiently exchanging heat between different components. Thanks to the high quality of workmanship and excellent thermal conductivity, the pads are used in many places on computers and electronic components. The thermal pad, which is based on silicone and a special filler, far outperforms generic and performance-oriented pads. In a test by PC Games Hardware (11/2018), the "excellent processability and reusability in every respect" was praised. In combination with the fair price and good performance, our thermal pad was recommended as a "price-performance tip". Thanks to its low hardness and good compression properties, the thermal pad acts as a perfect gap filler and easily bridges uneven surfaces and air gaps. The ARCTIC Thermal Pads are non-adhesive and can therefore be placed precisely. Installation is child's play and therefore perfect for beginners. The pad contains no metal particles, is electrically insulating and not capacitive. Handling is therefore safe since contact with electrical parts does not lead to damage. Technical specifications: Dimensions 120 x 20mm Contents: 2 pieces Thickness 0.5 mm Thermal conductivity 6.0 W / mK Hardness 25 shore 00 Relative density 3.2 g / cm³ colour blue Operating temperature -40 ~ 200 ℃ Volume resistance 1 X 1012 Ω-cm Interruption voltage 12 KV / mm Draw resistance 2.5 Kgf / cm² Elongation 45% Dielectric constant 14.1816 ε at 60 Hz 13.0264 ε at 1K Hz 13.0264 ε at 1M Hz Flammability V-0

Schrauben-Set von XSPC mit 16 UNC-Schrauben (16x 30 mm), Zum Verschrauben von Single- Dual- und Quad-Radiatoren mit Lüftern, Ideal für Push-Pull-Konfigurationen

Aluminium-Backplate von TechN, für Grafikkarten mit TechN RTX 2080- und 2080 Ti-Kühlkörper, Schwarz