Arctic P14 Max White High-Speed PWM Fan Extremely wide speed range Building on the success of the P14 PWM, the P14 Max extends the controllable speed to an astonishingly wide range from 400 rpm up to 2800 rpm. This enables both quiet operation when only a small amount of airflow is required and an unprecedented level of performance on heatsinks and radiators. The P14 Max achieves a significant performance increase on existing air and water cooling solutions. Maximum Performance — Without Compromise The P14 Max delivers a focused airflow and high static pressure, making it suitable for all scenarios. It is optimized for use on radiators, heat sinks, perforated panels and mesh. The P14 Max is therefore the optimal fan for enthusiasts and professionals who require maximum performance with high durability. 0 dB Mode — Zero rpm The speed of the fan can be throttled down to a standstill via PWM. This allows silent operation in IDLE and at the same time guarantees maximum performance when required. The P14 Max thus enables incomparably dynamic adjustment of the speed so that the airflow can be perfectly regulated for every case . Improved stability The P14 Max uses a closed fan wheel design. The advantage of this fan wheel combination is the uncompromising pressure stability. In scenarios with high pressure resistance and higher speeds, the force is distributed evenly across the entire fan wheel and enables low-vibration rotation with high static pressure at the same time. Maximum smoothness, minimal vibration The operating noise of the newly developed ARCTIC motor is barely perceptible even at the lowest speed. Thanks to sinusoidal magnetization, the motor of the P-fans only generates 5% of the commutation vibrations of a conventional DC motor. The rubber contact surfaces attached to the corners additionally dampen the residual vibrations caused by the higher revolutions. . Almost silent thanks to high-quality plain bearings As a special feature, the P14 Max is equipped with ARCTIC's proven hydrodynamic plain bearing. This enables almost silent operation at low speeds - as requested by many customers. At maximum speed, however, brutal performance is guaranteed. Although these bearings tend to wear out, ARCTIC does not compromise on durability and continues to offer the 6-year warranty. Quality you can rely on In order to guarantee the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the certainty that our products are not only outstanding in their quality, but also in their durability. A security that we are happy to pass on to our customers. That is why we offer a 6-year manufacturer's guarantee.
Tootekood: NA-IS1-12 CHROMAX.BLACK SX2GTIN: 9010018201451Jahutid ja lisad
Abstandshalter für 120 x 25 mm Noctua Lüfter, verbessert Akustik und Performance hinter Radiatoren und Mesh-Panelen, für Pull-Konfigurationen, aus reißfestem Silikon
The Alphacool Core Reservoir not only looks sleek with its aRGB lighting, but can also be used flexibly thanks to its compact size. The reservoir is made entirely of acrylic. The installation of a D5 or VPP pump is required for operation. Due to its compact design, the Core Reservior also fits into small cases.Core DesignA key element of Alphacool's Core Design series are the chrome-plated G1/4" connections made of brass. In the Core Reservoir, the connections are recessed rather than screwed into a thread, bypassing the problem of possible leaks due to cracking from the direct screwing of the connections into the acrylic. The connections are in two parts, fitted with an O-ring and counter each other when mounted in the acrylic. This not only ensures absolute sealing of each connection, but also allows for the clear and functional appearance of the Alphacool Core Design series.Easy installationWith the included Core Push Mounting kit, the Core Reservoir can be mounted on the case or on a radiator. The metal pins are attached to the radiator or case panel and the matching female sleeves are attached to the Reservoir (see manual). In the next installation step, the Reservoir is simply and tool-free pushed onto the pins. Alphacool's Push-Mounting allows for a secure fit of the reservoir on the case panel or on the radiator and allows for easy disassembly for maintenance or expansion projects.GamechangerThe Core Reservior is small and compact. This makes the reservoir ideal for custom water loops. An additional drain port is located on the side, allowing for easy and uncomplicated draining of the Reservoir.High-quality material selection & brilliant lightingAlphacool's Core Reservoir is made of high-quality acrylic glass, allowing for an unobstructed view of the coolant and brilliant illumination by the built-in digital addressable aRGB LEDs. The lighting can be controlled via a digital aRGB header on the motherboard or optionally through Alphacool's Aurora Eiscontrol aRGB controller (item number: 15360). Technical dataDimensions (L x W x H)140.00 x 145.00 x 62.00mmVolume (reservoir)approx. 130mlMaterialAcrylPump compatibilityD5/VPPThreads3x G1/4“ inner thread / 1x drain portMaximum working temperature60 °CPressure tested0.8 BarQuantity digital aRGB LEDs5Voltage digital aRGB LEDs5VPower connection digital aRGB LEDs3-Pin JST + 3-Pin 5VWeight1120gColortransparentTechnical data pumpMaterial pumpsynthetic materialMaterial pump coveraluminiumMaterial axleceramicsConnections4-Pin PWM | SATARotational speed2500 - 4500 RPMCable lengths4-Pin PWM - 48cm | SATA - 48cmOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25mMaximum flow rate340L/hMaximum working temperature60°CColorblackWarranty: 3 years???? Warranty Terms
Der Thermal Grizzly CPU Contact Frame Intel 1700 LT ist die „Lite“-Version des Intel 13th/14th Gen CPU Contact Frames und wird im kostengünstigen Spritzgussverfahren hergestellt. Um die notwendige Stabilität für den Contact Frame zu erreichen, wird ein hochwertiges Acrylnitril-Butadien-Styrol-Copolymer mit einem 15-prozentigen Glasfaseranteil verwendet. Die Innenkontur der Lite-Version ist identisch mit der des aus Aluminium gefrästen Frames. Der standardmäßige Integrated Loading Mechanism (ILM) verfügt über Kontaktpunkte, die sich in der Mitte der länglichen CPU befinden. Durch den daraus resultierenden ungleichmäßigen Anpressdruck des Prozessors in den Sockel, wölbt sich die Oberfläche des Integrated Heatspreader (IHS) konkav. Dadurch liegt die Bodenplatte des CPU-Kühlers hauptsächlich auf den Kanten des IHS auf, so dass der thermische "Hotspot" in der Mitte der CPU nicht optimal abgedeckt wird. Der CPU Contact Frame Intel 1700 LT hat eine spezielle Innenkontur, um den Anpressdruck bei der Montage von der Mitte der CPU zu den Kanten zu verlagern. Dadurch wird die konkave Wölbung des IHS vermieden. Dies führt dazu, dass CPU-Kühler besser auf dem Prozessor aufliegen und eine größere Kontaktfläche haben, um die Abwärme der CPU abzuleiten. Die Installation des Contact Frames ist sehr einfach und erfordert nur wenige Schritte. Je nach CPU-Kühler und verwendeter CPU können die Temperaturen des Prozessors spürbar gesenkt werden. Der CPU Contact Frame Intel 1700 LT ist mit Prozessoren der 12., 13. und 14. Generation für den Sockel LGA1700 kompatibel. Zusätzlich ist der Frame mit CPUs kompatibel, deren Integrated Heatspreader (IHS) um nicht mehr als 0,2 Millimeter abgeschliffen wurde. Bei der Montage ist darauf zu achten, dass sich keine elektronischen Bauteile unter dem Frame befinden. Hierauf ist besonders bei Mainboards mit dem Mini-ITX-Formfaktor zu achten.
Schwarzer Single-Tower-CPU-Kühler, 92-mm-PWM-Lüfter bis 2.300 U/min, asymmetrisches Design für hohe RAM-Kompatibilität, sechs Kupfer-Heatpipes und max. 210 W TDP, kompatibel mit AMD- und Intel-CPUs
120 mm PWM case fan in white with mirror effect Optimized for use in front of radiators or behind mesh Digitally addressable LEDs for stylish RGB lighting PWM-controlled speed range from 700 to 2,400 rpm High airflow of max. 110.87 m³/h at 36.6 dB(A) Jonsbo ZB-120: High-performance and quiet case fan Are you looking for a fan that offers excellent cooling performance and makes your PC a real eye-catcher? The Jonsbo ZB-120 leaves nothing to be desired! This PWM fan impresses with its stunning RGB lighting and mirror effects on the hub and housing sides. The Jonsbo ZB-120 is equipped with seven fan blades that provide a maximum airflow of 110.87 m³/h and a static pressure of 3.20 mmH2O. Control is handled via a PWM signal in the range from 700 to 2,400 revolutions per minute. Under full load, the ZB-120 reaches a noise level of 36.6 dB(A). Thanks to the high-quality hydraulic bearing and efficient lubrication, vibrations are effectively reduced, ensuring reliable and quiet operation. Stylish fan with RGB lighting and infinity mirror effect A special feature of the Jonsbo ZB-120 is the powerful ARGB lighting of the fan blades, combined with a stylish 400-layer mirror effect on the fan sides and the rotor hub. The lighting can be controlled directly via your motherboard or using third-party software such as Asus Aura Sync or RGB Fusion. The aluminum frame ensures a robust and durable housing.
