This connection cable can be used for connection of different devices from aquacomputer via the aquabus interface. Technical specifications: 4-Pin molex socket to 4-Pin molex plug, 1:1 connection Length approx 40cm incl. connectors
This temperature sensor is equipped with G1/4" inner threads on both sides to allow maximum flexibility. The temperature sensor can therefore be equipped with most fittings on the market, allowing the use with almost any hose size. The sensor connection cable has a length of 60cm and a 2-Pin connector. Technical specifications: Connection threads: 2x G1/4"Main body: Nickel coated brassCover ring: Delrin Compatible with: aquaduct-versions with external sensor input (360 XT, 720 XT)Sensor Inputs of many Mainboardsaquaero 3.07, aquaero 4.00aquastream XT UltraAlphacool HeatmasterInnovatek Fan-O-MaticLian Li MultipanelScythe KazeT-Balancer
Tootekirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a matte black straight adapter of 3/8 inch OD to G1 / 4 inch female, designed specifically for the inputs of the Eheim 1046 and 1048 pumps and the 1250 output. Before screwing in the adapter, the sealing ring should be coated with a lubricant, as otherwise it could be pulled out of its groove and exerts too much pressure on the plastic ring of the pump in the upper area. Alternatively, it is sufficient not to fully screw the adapter, but only up to the rubber itself. Technical Details:Material: brassColor: matt blackThread: G1 / 4 inch (internal thread)Compatibility: EHEIM 1046 (inlet) EHEIM 1048 (inlet) EHEIM 1250 (outlet)
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a white, straight adapter with two 1/4 inch external threads. Technical details:Material: MessingColor whiteConnections: male thread: 2x 1/4 inch
The Bitspower fittings are the ideal complement for water cooling systems. The G1/4" screw connection with union nut in matt black is suitable for 16/10mm Soft Tubes (as well as for 16/11mm). Technical Data: Material: Brass Color: Matt Black Thread: G1/4 Zoll Thread Length: 5 mm Tubing Size: 16/10 mm (ID 3/8", OD 1/2")
The nickel-plated adapter from Bitspower in the color shiny black, has a G1/4 inch internal thread and a G1/4 inch external thread. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Black Thread: 1x G1/4", 1x Inner G1/4" Thread Length: 5 mm
Toote kirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a matte black, straight adapter with two 1/4 inch external threads. Technical details:Material: MessingColor: matt blackConnections: male thread: 2x 1/4 inch
The nickel-plated adapter from Bitspower in the color shiny silver, has a G1/4 inch internal thread and a G1/4 inch external thread. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Silver Thread: 1x G1/4", 1x Inner G1/4" Thread Length: 5 mm
The adapter from Bitspower in the color matt black has a G1/4 inch internal thread and a G1/4 inch external thread. Technical Data: Material: Brass Main Color: Matt Black Thread: 1x G1/4", 1x Inner G1/4" Thread Length: 5 mm
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a straight G1 / 4 inch screw connection for 11 / 8mm hoses with union nut in a matt black version. Note:We recommend an 18 mm open-end wrench for the installation and removal of the connection. Please note that even when using tools the connection may only be tightened hand-tight. You can find our tool here . Technical details:Material: brassColor: matt blackThread: G1 / 4 inchesSuitable for: 11/8 mm hose
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a straight G1 / 4 inch screw connection for 16 / 13mm hoses (5/8 inch outside diameter - 1/2 inch inside diameter) with union nut in a matte black finish.Technical details:Material: MessingColor: matt blackConnections: Thread: G1 / 4 inch Hose: 16/13 mm
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a straight G1 / 4 inch screw connection for 16 / 11mm hoses with union nut in black nickel plated execution. Technical details:Material: MessingColor: matt blackConnections: Thread: G1 / 4 inch Hose: 16/11 mm
The adapter in the color shiny silver from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Connection: 12 mm (OD) Thread: G1/4" Thread Length: 5 mm
The nickel-plated adapter in the color shiny black couples two tubes, which do not run on a common straight line and provides at the adapter for a bend of 60 degrees. Two rubber rings seal both sides. The adapter is especially well compatible with the Crystal Link Tubes from Bitspower. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Angle: 60 ° Connections: 2x Ø 12 mm
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a matte black, straight 1/8 inch OD to G1 / 4 inch female adapter specifically designed for the outlet of an Eheim 1046 pump. Before screwing in the adapter, the sealing ring should be coated with a lubricant, as otherwise it could be pulled out of its groove and exerts too much pressure on the plastic ring of the pump in the upper area. Alternatively, it is sufficient not to fully screw the adapter, but only up to the rubber itself. Technical Details:Material: brass, black nickel platedColor: matt blackConnections: Male Thread: 1/8 inch Female Thread: G1 / 4 inchesFor: outlet Eheim pump 1046
The nickel-plated adapter in matt black couples two tubes, which do not run on a common straight line, and ensures a bend of 30 degrees at the adapter. Two rubber rings seal both sides. The adapter is especially well compatible with the Crystal Link Tubes from Bitspower. Technical Data: Material: Nickel-Plated Brass Colour: Matt Black Angle: 30 ° Connections: 2x Ø 12 mm
The nickel-plated adapter in the color shiny black couples two tubes, which do not run on a common straight line and provides at the adapter for a bend of 90 degrees. Two rubber rings seal both sides. The adapter is especially well compatible with Bitspower's Crystal Link Tubes. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Angle: 90 ° Connections: 2x Ø 12 mm
The adapter in the color shiny black from Bitspower is especially designed for the connection of two graphics cards with SLI/ Crossfire to bridge the short distance. If two graphics cards are used, two of the adapters are also required. They are sealed with two rubber rings. The adapter is especially well compatible with Bitspower's Crystal Link Tube series. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Connection: 12 mm (OD) Thread: G1/4" Thread Length: 5 mm
Toote kirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a straight G1 / 4 "fitting for H1 / 4" ID tubing or 10mm HI-Flow design tubing. Since no union nut is used, any tube thickness and thus outer diameter can be used. To fix the hoses on the connection, we recommend a cable tie or a hose clamp as a precaution. Note: We recommend a 15mm spanner for installation and disassembly of the connection. Please note that even when using tools the connection may only be tightened hand-tight. You can find our tool here . Technical details:Material: nickel-plated brassThread: G1 / 4 inchesSuitable for: 10 mm hose (inner diameter)
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a straight and black nickel plated G1 / 4 "fitting for 3/8" or 10mm ID tubing in Real Hi-Flow design. Since no union nut is used, any tube thickness and thus outer diameter can be used. To fix the hoses on the connection, we recommend a cable tie or a hose clamp as a precaution. Note: We recommend a 15mm spanner for installation and disassembly of the connection. Please note that even when using tools the connection may only be tightened hand-tight. You can find our tool here . Technical details:Material: brass, black nickel platedThread: G1 / 4 inchesSuitable for: 10 mm hose (inner diameter)
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a straight and matte black G1 / 4 "fitting for 3/8" or 10mm ID tubing in Real Hi-Flow design. Since no union nut is used, any tube thickness and thus outer diameter can be used. To fix the hoses on the connection, we recommend a cable tie or a hose clamp as a precaution. Note: We recommend a 15 mm open-end wrench for installation and removal of the connection. Please note that even when using tools the connection may only be tightened hand-tight. You can find our tool here . Technical details:Material: brassColor: matt blackThread: G1 / 4 inchesSuitable for: 10 mm hose (inner diameter)
The adapter in matt black from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has an angle of 90 degrees. Technical Data: Material: Brass Colour: Matt Black Angle: 90 ° Thread: G1/4" and inner G1/4" Thread Length : 5 mm
The nickel-plated sealing plug in the colour shiny silver from Bitspower can be screwed into a G1/4" internal thread for a certain time or permanently, e.g. to seal radiators or equalising tanks. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Thread: G1/4"
The nickel-plated adapter in the colour shiny silver from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has a 90 degree angle and can be rotated on the thread for easier tube alignment. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Angle: 90 ° Thread: G1/4" and inner G1/4" Thread Length : 5 mm
The plug in white from Bitspower, can be screwed into a G1/4" internal thread for a certain time or permanently, e.g. to close radiators or equalizing tanks. Technical Data: Material: Brass Colour: White Thread: G1/4" Thread Length: 5 mm
To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a matte black, straight adapter with two G1 / 4-inch external threads. The special feature: The length of the adapter can be flexibly adjusted between 22 and 31 mm (measured without thread). For this purpose, only one nut is loosened, one side pulled out as desired and then fixed again with the union nut. Technical details:Material: brass, matt blackConnections: male thread: 2x G1 / 4 inchLength: 22 - 31 mm (variable)
The adapter in carbon black from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has an angle of 90 degrees. Technical Data: Material: Brass Colour: Carbon Black Angle: 90 ° Thread: G1/4" and inner G1/4" Thread : G1/4" Thread Length : 5 mm Thread : Inner G1/4" Thread Length : 6 mm
The nickel-plated filler neck in the colour shiny silver from Bitspower is used when coolant is filled into the cooling circuit from the top of the housing. To do this, cut a small opening in the housing, place the connection through the hole or on the edge of the hole and screw it on from the other side with the screw ring. The filler neck can be connected to the cooling circuit via a normal G1/4" female thread connection. After filling, the upper side should be sealed with a sealing plug. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Thread: Inner G1/4" Thread Length: 15 mm
This filler neck in carbon black from Bitspower is used when coolant is filled into the cooling circuit from the top of the housing. To do this, cut a small opening in the housing, place the connection through the hole or on the edge of the hole and screw it on from the other side with the screw ring. The filler neck can be connected to the cooling circuit via a normal G1/4" female thread connection. After filling, the upper side should be sealed with a sealing plug. Technical Data: Material: Brass Colour: Carbon Black Thread: Inner G1/4" Thread Length: 15 mm
Dimensions 120x120x25mm, Turns 1200rpm, Air flow rate 86.02m³ / h, Air pressure 1.27mmH₂O, Volume 19.5dB (A), Fan bearing LLS, Connection 3-pin, Voltage range 7-12V, Power consumption 1.2W, Special features RGB illuminated, RGB header (3-pin + 5V / DATA / GND), FD-FAN-PRI-AL12
Low-Noise-Pumpe von Alphacool und Laing, Silbernes Messing-Gehäuse (Silver Nickel), möglich, 200 l/h und 2,44 m Förderhöhe bei 10 Watt Leistungsaufnahme, Complete Edition mit Alphacool Eisdecke Aufsatz in Acryl, 5x G1/4-Zoll-Gewinde
