3x 120 mm PWM fans optimized for use in cases Daisy-chain for less cable clutter Excellent cooling at up to 1,800 RPM and quiet operation with a maximum of 23.8 dB(A) Stylish lighting thanks to addressable RGB LEDs Standard orientation for regular airflow High airflow of 102.53 m³/h Details of the Jonsbo ZL-120W ARGB Fans The Jonsbo ZL-120W is a powerful 120 mm fan specifically designed for use as a case fan. It features daisy-chain connectivity, a plug-in system that reduces cables in your gaming PC and contributes to a cleaner look. With its addressable RGB lighting, it not only looks stylish but also delivers plenty of power. The built-in hydraulic bearing significantly extends the life of your device, ensuring long-term reliable, low-maintenance operation. Efficient cooling performance at low noise levels The Jonsbo ZL-120W adjusts its speed via a PWM signal to match the system’s performance requirements. This allows for precise adjustment of fan speeds from 800 to 1,800 RPM. Even at full load, it operates at just 23.8 dB(A). Additionally, each corner is equipped with rubber mounts to isolate vibrations and minimize noise. With an airflow of up to 102.53 m³/h and a static pressure of 2.21 mmH₂O, the CPU is effectively cooled.
3x 120-mm PWM fans optimized for use in cases Daisy-chain for less cable clutter Good cooling at up to 1,800 rpm and quiet operation at a maximum of 23.8 dB(A) Stylish lighting thanks to addressable RGB LEDs Regular orientation for standard airflow High airflow of 99.46 m³/h Jonsbo ZL-120B Reverse ARGB fan in detail The Jonsbo ZL-120B Reverse is a powerful 120-mm fan with a reverse design, specially developed for use as a case fan. Thanks to the reverse design, the fan can move air in the opposite direction, which ensures more efficient cooling in certain case configurations. It features daisy-chain, a plug-in system that reduces the number of cables in your gaming PC and contributes to a cleaner look. With its addressable RGB lighting, it doesn’t just look stylish but also delivers plenty of power. Thanks to the built-in hydraulic bearing, you benefit from a significantly extended lifespan for your device, allowing for reliable and low-maintenance operation in the long term. Efficient cooling at low noise levels The Jonsbo ZL-120B Reverse adjusts its speed via a PWM signal according to the system’s requirements. This enables precise adjustment of the fan speed from 800 to 1,800 rpm. Even at full load, it operates at a volume of just 28.8 dB(A). Each corner is also fitted with rubber pads to decouple vibrations and minimize noise. With an airflow of up to 99.46 m³/h and a static pressure of 2.0 mmH₂O, the CPU is effectively cooled.
Tootekood: CR-3000E COLOR WHITEGTIN: 6970620554075Jahutid ja lisad
Extremely powerful dual-tower cooler with 260 W TDP Six 6-mm heatpipes 2x PWM fans in 120mm format High compatibility with AMD and Intel Bracket for easy installation Integrated lighting on fans and frame The Jonsbo CR-3000E CPU Cooler: The Jonsbo CR-3000E CPU cooler offers extremely high cooling performance thanks to its six heatpipes and PWM fans. In addition, this very quiet cooler features immense cooling reserves with a TDP of 260 W, making it ideal for overclocked CPUs and easy to install even with the motherboard already mounted. Sleek design with powerful cooling performance The CR-3000E is a high-performance dual-tower cooler that enables very efficient and quiet cooling with its two fans. The smooth-running fan motors reduce vibrations and, together with the bearing, ensure a very long lifespan. Perfect cooling for your CPU including lighting effects Thanks to six high-performance heatpipes, the heatsink ensures excellent heat dissipation. The cooler's large fin surface, due to its dual-tower design, transfers a particularly large amount of heat to the airflow. Additionally, built-in lighting enhances your setup and adds an extra visual highlight.
The GA II Lite 240 Performance offers high-end cooling performance without excessive visuals. Instead of RGB fans, you get maximum functionality with whisper-quiet performance. Ideal for users who appreciate performance, durability, and acoustic restraint. 240 mm radiator: Extra cooling area for overclocked CPUs and continuous load 3x performance fans: High air pressure (5.0 mmH₂O), low noise level (29.8 dBA) 400 mm tubing: For flexible routing, even in large cases Daisy-chain fans: Reduced cabling for clean builds Copper cooler & durable pump: Built for continuous operation Lian Li GA II Lite Performance: High-end cooling - invisibly efficient Two powerful fans and a massive cooling surface ensure low temperatures even under peak loads. Whether AMD Ryzen 9, Intel Core i9 or workstation Xeons – this AiO is ready for the highest demands and remains pleasantly quiet. Clean builds without distractions The minimalist design fits perfectly into studio setups, professional workspaces, or functional gaming PCs. The clear lines and cable-friendly construction underline the commitment to quality and order. Durability at the center The fluid-dynamic fans are characterized by low wear and long lifespans. Together with the powerful pump and sleeved tubing system, this results in a maintenance-free solution for systems that just work – day after day.
The Lian Li GA II Lite 240 RGB offers maximum cooling surface and an impressive ARGB style—ideal for high-end PCs with high performance demands and transparent cases. 240mm Radiator: For extreme cooling performance Infinity Mirror Pump: With rotatable logo and 16 LEDs 3x ARGB Fans: Daisy-chain design, 2,500 RPM, 134.2 m³/h ARGB controlled via motherboard: Synchronizable with Aura, RGB Fusion, etc. Intel & AMD Support: LGA1700/1851 & AM4/AM5 Lian Li GAII Lite: All-in-one water cooling with infinity mirror The illuminated pump housing features a perfectly staged geometric infinity mirror, which creates a fascinating depth effect with 16 addressable LEDs. The rotatable logo adapts to any installation direction—so the appearance is always perfect, no matter how you mount the pump. You can control the ARGB effects via your motherboard or external controllers and perfectly synchronize them with the rest of your system. Powerful cooling performance for high-end processors The large radiator combined with two 120mm RGB fans ensures excellent thermal performance. With a static pressure of 5.1 mmH₂O and an airflow of 134.2 m³/h, even overclocked CPUs are safely kept at the right temperature. The pump operates at 3,800 RPM and, thanks to its copper base plate, is particularly efficient at transferring heat. Neat, durable, future-proof Thanks to daisy-chain connection, all fans are connected via a single cable—making cable management easier and saving time during installation. The 400mm long, braided hoses are flexible and abrasion-resistant—ideal for easy routing and various case types.
A high-airflow ARGB 120mm Fluid Dynamic Bearing fan is a balanced combination of incredible aesthetics, cooling capabilities and quiet operation. Reversed fan blade design with reversed airflow compared to regular version Customizable speeds of up to 1850RPM with incredible airflow of 75CFM Fluid Dynamic Bearings for long lasting operation Quiet operation with maximum noise level of 34dB(A) Addressable RGB LEDs that illuminate fan bladesWarranty: 2 Years RGB Connector: 3-Pin A-RGB Connector Power Connector: 4-Pin PWM Connector Speed: 800 - 1850RPM ± 10% Air Flow: 75CFM / 127.42 m³/h Static Pressure: 2.23 mmH₂O Maximum noise level: 34 dBA (Max) Bearing: Fluid Dynamic Bearing Current: 0.2A Voltage: 12V
Alphacool presents its new graphics card water coolers for the latest Nvidia GeForce RTX generation. They are part of the Core product series and combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers offer outstanding cooling performance. At the center of the cooler is the one-piece milled copper cooler, complemented by a precision-machined brass terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother, brighter surface than conventional nickel plating. The visual design of the GPU water cooler has been changed only slightly. A special highlight is the newly added Core emblem above the jet plate, which underscores its affiliation with the Core series and visually enhances the design. The series continues to rely on high-quality brass fittings, guaranteeing optimal quality and safety. The specially adapted aluminum backplate covers the entire rear of the copper cooler and ensures a clean and uniform appearance. The acrylic, in combination with the aRGB lighting, enables even and impressive illumination of the entire cooler. Technically, the GPU water cooler has been completely redesigned. To optimize cooling performance, the gaps between the cooler and the PCB components were redefined and tested. The water flow was simulated using state-of-the-art software and verified in practical tests. These extensive tests enabled improvements to the cooler base and nozzle to ensure the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - Gainward GeForce RTX™ 5090 Phantom (4878 / NE75090019R5-GB2020P) - Gainward GeForce RTX™ 5090 Phantom GS (4861 / NE75090S19R5-GB2020P) - Palit GeForce RTX™ 5090 GameRock (NE75090019R5-GB2020G) - Palit GeForce RTX™ 5090 GameRock OC (NE75090S19R5-GB2020G) Technical data cooler Complete dimensions (L x W x H) 214.40 x 153.37 x 34.38mm Radiator base material chrome-plated copper Material radiator top Acrylic Material Terminal nylon Material connection thread Brass Maximum working temperature 60°C Pressure tested 0.8 bar Connections 4 x G1/4" Thickness of radiator base 3.25mm Thick cooling fins 0.4mm Distance between cooling fins 0.4mm lighting digital aRGB LEDs Power connection digital aRGB LEDs 3-pin JST Voltage digital aRGB LEDs 5V Number of digital aRGB LEDs 9 Color transparent Technical data backplate Dimensions (L x W x H) 214.40 x 124.80 x 6mm Thick backplate without spacers 3mm material aluminum Warranty: 3 years
Watercool HEATKILLER® RAD 360-S Stainless Steel - Compact High-Performance Radiator with Exclusive Design! Enhance your water cooling system with the new HEATKILLER® RAD 360-S Stainless Steel - a high-quality mesh radiator that combines performance, design, and quality at the highest level! The HEATKILLER® RAD 360-S Stainless Steel is a 30 mm thick radiator that offers outstanding cooling performance despite its compact dimensions. It impresses with Watercool's signature high-quality workmanship and an exclusive design featuring brushed stainless steel. Highlights: High-performance cooling mesh: Equipped with brass pre-chambers and copper fins for optimal heat dissipation. Compact dimensions: With a thickness of only 30 mm, it fits even in compact cases. Exclusive design: The frame and side panels made of brushed stainless steel give the radiator a particularly elegant look. Optimized for fans: Supports up to six 120 mm fans in push-pull configuration for maximum cooling performance. Easy integration: Two standard G1/4" threads allow for easy integration into the cooling circuit. High-quality workmanship: "Made in Germany" - Finishing and quality control are carried out in Germany. Technical specifications: Dimensions: 398 x 120 x 30 mm (L x W x H) Weight: 0.92 kg Color: Brushed stainless steel Connections: 2x G1/4" threads Fan compatibility: Up to 6x 120 mm fans (push-pull) Radiator mounting: M3 The HEATKILLER® RAD 360-S Stainless Steel is the perfect choice for demanding water cooling systems that value performance, design, and quality, and desire a touch of luxury.
Schwarzer Radiator im X-Flow-Design, für bis zu acht 120-mm-Lüfter in Push/Pull-Konfiguration, Vollkupfer-Aufbau mit schwarzem Stahl-Rahmen, 30 Millimeter Dicke und 16 FPI, 4x G1/4-Anschlüsse
Phobya R27-S360 Black Radiator – Large-area cooling performance for your high-end system Expand your system's cooling capacity with the Phobya R27-S360 Black Radiator. This generously sized radiator is designed to ensure superior heat dissipation even in high-performance and demanding setups, unleashing the full potential of your components. High-quality materials for maximum efficiency: The Phobya R27-S360 relies on a proven material combination for excellent cooling results. The fins are made of high-quality 99.9% copper with a density of 18 FPI (fins per inch), providing a very large surface area for heat exchange. The water channels are also made of copper (H65) to ensure outstanding thermal conductivity. Durable brass (H62) is used for the pre-chambers and the robust G1/4 inch connections, guaranteeing durability and a secure connection. Optimized design for strong performance: With its dimensions of 393 × 120 × 27 mm, the R27-S360 offers a substantial cooling surface and is ideal for systems requiring intensive heat dissipation. Its weight of 725 grams underscores its solid construction and the amount of copper used. Flexible fan compatibility and easy installation: The radiator is designed for use with up to three 120 × 120 mm fans, allowing for massive airflow for cooling. M4 screws for 30 mm thick fans and 6 mm mounting screws are included for easy installation. Tested quality and environmental awareness: Each Phobya R27-S360 radiator undergoes a 1-bar pressure test to ensure leak-tightness and reliability. Furthermore, the radiator is RoHS compliant, thus complying with current environmental guidelines. Technical data at a glance: - Fin material: High-quality copper (99.9%), 18 FPI - Material channels: copper H65 - Material pre-chambers & threads: Brass H62 - Connections: G1/4 inch - Dimensions (L × W × H ): 393 × 120 × 27 mm - Weight: 725 g - Fan compatibility: Up to 3 × 120 × 120 mm fans - Supplied screws: M4 for 30 mm fan, 6 mm mounting screws - Pressure tested: 1 bar - RoHS compliant Rely on the Phobya R27-S360 Black Radiator for a powerful, reliable, and large-area water cooling solution that keeps your system cool.
Efficient. Convenient. Designed to work in high temperatures. Pactum 4 - thermal paste for demanding components.This thermal paste is enough for several applications and conduct low temperature like a dream. Plus, its application takes less time than reading this description. All you have to do is spread a thin layer and that's it - you can assemble your cooling system.
The Valkyrie V360 AIO pairs bold visual design with flagship performance. A high-speed, award-winning pump powers the system, while our radiator-cooling optimised fans deliver massive airflow and static pressure with near-silent precision. And with a vibrant 3.5" LCD screen front and center, your system’s performance finally looks as good as it runs. Patented high-speed pump for extreme thermal efficiency 2x Valkyrie S12 fans optimised for radiators 3.5" IPS LCD display with 60Hz refresh rate 5-year warranty
120-mm PWM fan with aluminum framePractical wireless connection for fewer visible cables40 digitally addressable RGB LEDsSpeed and lighting controllable via Lian Li L-Connect 3 softwareWhisper-quiet cooling with max. 2,600 RPM at 33 dB(A)153.08 m³/h max. airflow and max. 3.97 mmH2O static pressureRubber pads to decouple disturbing vibrationsNote: This fan requires a Lian Li L-Wireless controller, sold separately.Wireless ARGB Fans for Clean Cable ManagementThe UNI FAN TL Wireless from Lian Li offers an efficient solution for cable management in your PC. With its wireless 2.4 GHz control for lighting effects and fan speed, you need significantly fewer cables, simplifying your system build. The fan offers dual-zone lighting effects and is versatile.UNI FAN TL Wireless: Easy Installation and Full ControlThe UNI FAN TL Wireless is easily installed and controlled thanks to the L-Wireless controller. Through the wireless connection, you control both RGB lighting and fan speed directly through your motherboard, without the need for extra cables.Performance with Low NoiseThanks to the Fluid Dynamic Bearing (FDB) technology, the Lian Li UNI FAN TL Wireless runs quietly and efficiently, even at high speeds of up to 2,600 RPM. This provides powerful cooling and an aesthetically pleasing solution for your PC, making traditional fans fade into the background compared to UNI FAN TL Wireless!
120-mm PWM fan with aluminum framePractical wireless connection for fewer visible cables40 digitally addressable RGB LEDsSpeed and lighting adjustable via Lian Li L-Connect 3 softwareWhisper-quiet cooling with max. 2,300 RPM at 34 dB(A)141.69 m³/h max airflow and 2.66 mmH2O static pressureRubber pads to decouple disturbing vibrationsNote: This fan requires the Lian Li L-Wireless controller. The controller is sold separately.Wireless ARGB Fans for Clean Cable ManagementThe UNI FAN TL Wireless from Lian Li offers an efficient solution for cable management in your PC. With its wireless 2.4 GHz control for lighting effects and fan speed, it requires significantly fewer cables, simplifying the build of this system. The fan offers dual-zone lighting effects and is easy to install.UNI FAN TL Wireless: Simple Installation and Full ControlThe UNI FAN TL Wireless is easy to install and control thanks to the L-Wireless controller. Through the wireless connection, you control both the RGB lighting and the fan speed directly from your motherboard without the need for extra cables.Customizable Display and Quiet PerformanceThanks to the Fluid Dynamic Bearing (FDB) technology, the Lian Li UNI FAN TL Wireless runs quietly and efficiently, even at high speeds of up to 2,300 RPM. This provides powerful cooling and an aesthetically pleasing solution for your PC, making traditional fans fade in the light of UNI FAN TL Wireless.Reverse Blade for Clean Look and More PerformanceAre you looking for a solution to optimize airflow in your PC while also improving the aesthetics of your fans? With a Reverse Blade fan, you choose a fan blade shape that directs airflow in the opposite direction.Your advantage: The look is the same with every fan. Gone are the days of having to mount fans with the back side against the case to pull in fresh air. This keeps your system cool and incredibly quiet, even under heavy applications!
The Lian Li UNI FAN TL LED Wireless fans impress with their elegant look and enhance your setup visually. The plug-in system, in particular, ensures a tidy build. Your hardware is kept at cool temperatures—even under heavy load. 140 mm PWM fan with reverse blades Less cable clutter thanks to a practical plug-in system and daisy-chain capability Full control over the fans with the L-Connect 3 software Infinity mirror and LED strips on the side provide an elegant look High airflow in m³/h and static pressure with max. mmH2O Lian Li UNI FAN TL LED Wireless: Stylishly Designed Fans The Lian Li UNI FAN TL LED Wireless is a 140 mm fan with reverse-oriented blades in black. Thanks to its high cooling performance, this PC fan is also suitable for high-end systems. Reverse blade fans are specially designed to reverse the airflow—ideal for use as intake fans. Unlike standard fans, they display their front side, the visually appealing side. This keeps your build looking clean—with no visible backs or unsightly stickers. 140 mm fan with impressive cooling performance A high airflow of up to 172.6 m³/h and a static pressure of up to 2.27 mmH2O, combined with up to 1,800 RPM, provide effective cooling for your gaming hardware. The increased build height of 28 mm further promotes cool temperatures. At no more than 29 dB(A), the fan is barely audible even at full load despite its high cooling performance. Smart plug-in system and daisy-chaining Thanks to the practical plug-in system, individual fans can easily be connected together. You'll need fewer cables for installation, making your build look significantly cleaner. The Lian Li wireless controller, which can be connected to the motherboard and linked with the fans, reduces cable clutter even further. Please note that the wireless controller must be purchased separately. In addition, you can combine the LCD variant with the fans of the LED variant, as long as you do not connect more than four fans to one controller. The plug-in system is not only practical, but also enables seamless transitions between fans. This particularly benefits the LED strips on the edges—once connected, stylish RGB effects can be set. The infinity mirror also gives the fan an attractive look.
The Lian Li UNI FAN TL LED Wireless fans impress with their elegant look, visually enhancing your setup. The modular system, in particular, ensures a tidy build. Your hardware will be kept cool—even under heavy load. 140 mm PWM fan Less cable clutter thanks to practical plug-in system and daisy chain Full control over the fan with the L-Connect 3 software Infinity mirror and LED strips on the side create an elegant look High airflow of 176.5 m³/h and static pressure up to 2.34 mmH2O Lian Li UNI FAN TL LED Wireless: RGB fan with stylish design The Lian Li UNI FAN TL LED Wireless is a 140 mm fan with standard-oriented white fan blades. Thanks to its high cooling performance, this PC fan is also suitable for high-end systems! Impressive cooling performance High airflow of up to 176.5 m³/h and static pressure up to 2.34 mmH2O, together with up to 1,800 RPM, result in effective cooling of your gaming hardware. The increased height of 28 mm further promotes cool temperatures. Despite its high cooling performance, the fan is hardly audible at full load with no more than 29 dB(A). Smart plug-in system and daisy-chaining Thanks to the practical plug-in system, individual fans can be easily connected together. You need fewer cables, making your build look much cleaner. The Lian Li Wireless Controller, which is connected to the motherboard and can link to the fans, further reduces cable clutter. Note that the wireless controller must be purchased separately. You can also combine the LCD version with the LED version fans, as long as you do not connect more than four fans to one controller. The plug-in system is not only practical, but also enables a seamless transition between fans. This particularly benefits the LED strips along the edges—when connected, chic RGB effects can be set. The infinity mirror also gives the fan an appealing look.
The Lian Li UNI FAN TL LED Wireless fans impress with their elegant look, enhancing the aesthetics of your setup. The plug-in system in particular ensures a tidy build. Your hardware is kept cool—even under heavy load. 140 mm PWM fan Less cable clutter thanks to a practical plug-in system and daisy-chain capability Full control of the fan with L-Connect 3 software Infinity mirror and LED strips on the side provide an elegant look High airflow at 176.5 m³/h and static pressure up to 2.34 mmH2O Lian Li UNI FAN TL LED Wireless: Stylishly designed RGB fan The Lian Li UNI FAN TL LED Wireless is a 140 mm fan with standard-oriented black fan blades. Thanks to its high cooling performance, this PC fan is suitable even for high-end systems! Impressive cooling performance High airflow of up to 176.5 m³/h and a static pressure of up to 2.34 mmH2O, together with speeds of up to 1,800 RPM, result in effective cooling for your gaming hardware. The increased height of 28 mm also helps keep temperatures cool. At no more than 29 dB(A), the fan remains barely audible even under full load despite its strong cooling performance. Smart plug-in system and daisy-chaining Thanks to the practical plug-in system, individual fans can be easily connected together. You need fewer cables for connection, giving your build a much cleaner appearance. The Lian Li Wireless Controller offers even less cable clutter, as it can be connected to the motherboard and then linked with the fans. Please note that the wireless controller must be purchased separately. You can also combine the LCD variant with the LED variant fans, as long as you don’t connect more than four fans to a single controller. The plug-in system is not just practical but also allows for a seamless transition between fans. This especially benefits the LED strips on the edges—connected together, you can set stylish RGB effects. The infinity mirror also gives the fan an appealing look.
The UNI FAN CL Wireless from Lian Li offers you wireless technology in a stylish fan. Thanks to tool-free plug-in connection, 2.4 GHz synchronization, and dual-zone RGB, you can upgrade your system in no time—completely cable-free. Ideal for clean setups and powerful cooling. 3-pack of 120 mm PWM fans with black frame & aluminum nameplate Dual-zone RGB: separate control for fan blades & side strips Push-to-connect: tool-free connection of multiple fans FDB bearing: quiet, long-lasting operation with up to 2,150 rpm 131.41 m³/h airflow & 2.52 mmH₂O static pressure L-Connect 3 software: convenient control of speed & RGB Lian Li UNI FAN CL Wireless Fan: Dual-zone RGB for impressive lighting effects The independently controllable LED zones let you fine-tune the lighting even more. Whether on the fan blades or the side strips—your system gets the look you want. Tool-free installation, wireless control Thanks to the push-to-connect mechanism, you can connect the fans to each other without screws. Paired with the optional L-Wireless Controller, you control lighting and speed wirelessly via L-Connect 3 software. PWM fan for quiet cooling with strong airflow With a volume of 131.41 m³/h, 2.52 mmH₂O pressure, and just 29.8 dB(A) noise level, the CL Wireless fan is both quiet and powerful—perfect for demanding builds in your setup.
3-pack of 120mm PWM intake fans in black with aluminum frame Convenient plug-in system for less cabling 40 digitally addressable RGB LEDs and infinity mirror effect Speed and lighting controllable via software Max. 2,100 RPM at 32 dB(A) 108.05 m³/h maximum airflow and max. 2.02 mmH2O static pressure Rubber dampers for vibration reduction Note: The plug-in system is only compatible with LULI-028, LULI-029, LULI-030, or LULI-031 The Lian Li UNI FAN SL-INF 120 Reverse Blade: Intake fan with extra power! The Lian Li UNI FAN SL-INF 120 Reverse Blade is a 120 mm PWM intake fan. The reverse blade version intake fans allow you to create a uniform look when used with conventional UNI FAN SL-INF fans. With the reverse blade fans, you can create an airflow in the opposite direction while still displaying the stylish side with the infinity mirrors. This ensures that, even with reversed airflow, you always see the aesthetic side of the fan—for a consistent look in your case. As a further development of the UNI FAN SL, it features improved airflow over the UNI FAN SL-INF and is excellent for use on radiators, but also looks great as a case fan. The innovative daisy-chain plug-in system provides a tidy look with minimal cable clutter. A true highlight of the Lian Li UNI FAN SL-INF 120 Reverse Blade is the strong ARGB lighting, which, especially in combination with the infinity mirrors, creates spectacular lighting effects. Installation of the Lian Li UNI FAN SL-INF 120 series follows a clever and unique concept: The fans have pin contacts and are connected via a practical plug-in system. Multiple UNI FAN SL-INF 120 mm fans are connected to form a cluster and no longer need to be connected individually by cable—this saves a lot of time and prevents cable clutter. The pin contacts transmit both power and PWM and ARGB signals. Revised plug-in system for the Lian Li UNI FAN SL-INF 120 series The plug-in system introduced with the UNI FAN SL and AL series has been further improved with the UNI FAN SL-INF 120 series. For one thing, the plug is now removable, which avoids possible collisions with radiator connections and provides a cleaner look. The cable module connector has also been made smaller and relocated to the center of the frame, further facilitating radiator use. The previously separate cables for power and ARGB have been combined into a 7-pin cable that can be oriented in two directions. An adapter to separate the two strands for direct connection to the motherboard is included with the single-version fan. Note: The connectors of the SL-INF series are not compatible with the SL and AL series! Suitable for cases, radiators, and CPU air coolers The hydrodynamic bearing of the Lian Li UNI FAN SL-INF 120 Reverse Blade ensures high smoothness and long lifespan. Thanks to reduced friction losses, higher speeds are achieved at the same power consumption compared to conventional fans. The effective speed ranges from 200 to 2,100 RPM. If desired, the fans can be completely switched off via software. With up to 32 dB(A) at full load, the UNI FAN SL-INF 120 Reverse Blade is not excessively loud and, with a 108.05 m³/h airflow and 2.02 mmH2O static pressure at full speed, offers strong performance values. Strong ARGB lighting and infinity mirrors The Lian Li UNI FAN SL-INF 120 Reverse Blade is equipped with a total of 40 digitally addressable RGB LEDs. They are distributed across the rotor hub and two slim strips in the aluminum frame. On the front of the hub and on two sides, there are also infinity mirrors that uniquely enhance the lighting effects. To control the speed and ARGB lighting, you can connect fan clusters directly to the motherboard via an adapter. They are recognized by the free L-Connect 3 software and can be configured there. Alternatively, you can connect the 7-pin cable to one of the two ports on the L-Connect 3 controller, which is included with the 3-pack versions of the UNI FAN SL-INF fans (LULI-028, LULI-029).
3-pack of 120 mm PWM intake fans in white with aluminum frame Convenient plug-in system for fewer cables 40 digitally addressable RGB LEDs and infinity mirror effect Speed and lighting controllable via software Max. 2,100 RPM at 32 dB(A) 108.05 m³/h max. airflow and max. 2.02 mmH2O static pressure Rubber dampers for vibration reduction Note: Plug-in system only compatible with LULI-028, LULI-029, LULI-030, or LULI-031 The Lian Li UNI FAN SL-INF 120 Reverse Blade: Intake fan with extra power! The Lian Li UNI FAN SL-INF 120 Reverse Blade is a 120 mm PWM intake fan. The intake fans in the reverse blade variant allow you to achieve a uniform look when used together with conventional UNI FAN SL-INF fans. With the reverse blade fans, you can create airflow in the opposite direction while still showcasing the stylish side with the infinity mirrors. This ensures that, despite reversed airflow, you always see the best side of the fan—delivering a consistent look in your case. As a further development of the UNI FAN SL, it features improved airflow compared to the UNI FAN SL-INF and is excellent for use on radiators, but it also performs well as a case fan. The clever daisy-chain plug-in system creates a tidy look with minimal cable clutter. A real highlight of the Lian Li UNI FAN SL-INF 120 Reverse Blade is the powerful ARGB illumination, which, especially in combination with the infinity mirrors, creates spectacular lighting effects. The installation of the Lian Li UNI FAN SL-INF 120 series follows a clever and unique concept: the fans have pin contacts and are connected with a practical plug-in system. Several UNI FAN SL-INF 120 mm fans are joined into a cluster and no longer need to be connected individually by cable—saving a lot of time and preventing a mess of cables. The pin contacts transmit power as well as PWM and ARGB signals. Redesigned plug-in system for the Lian Li UNI FAN SL-INF 120 series The plug-in system introduced with the UNI FAN SL and AL series has been improved again for the UNI FAN SL-INF 120 series. On one hand, the plug-in system is now designed so that the connector can be removed. This prevents possible collisions with radiator fittings and at the same time ensures a tidy look. Additionally, the connection for the cable module has been made smaller and relocated to the center of the frame, which also makes it easier to use on radiators. The previously separate cables for power and ARGB have been combined into a 7-pin cable that can be routed in two directions. An adapter that separates the two strands for direct connection to the motherboard is included with the single-fan version. Note: The connectors of the SL-INF series are not compatible with the SL and AL series! Suitable for cases, radiators, and CPU air coolers The hydrodynamic bearing of the Lian Li UNI FAN SL-INF 120 Reverse Blade ensures smooth running and a long lifespan. Thanks to reduced friction losses, higher speeds can be achieved at the same energy consumption compared to conventional fans. The effective RPM ranges from 200 to 2,100. If desired, the fans can be completely switched off via software. At up to 32 dB(A) under full load, the UNI FAN SL-INF 120 Reverse Blade is not excessively loud and offers strong performance values with 108.05 m³/h airflow and 2.02 mmH2O static pressure at full speed. Powerful ARGB lighting and infinity mirror The Lian Li UNI FAN SL-INF 120 Reverse Blade features a total of 40 digitally addressable RGB LEDs. These are distributed between the hub of the rotor and two thin strips in the aluminum frame. Infinity mirrors are also built into the front of the hub and on two sides, uniquely enhancing the lighting effects. To control the speed and ARGB lighting, you can connect fan clusters directly to the motherboard via an adapter. They are detected by the free L-Connect 3 software and can be configured through it. Alternatively, you can connect the 7-pin cable to one of the two ports on the L-Connect 3 controller, which is included with the triple-pack versions of the UNI FAN SL-INF fans (LULI-028, LULI-029).
Thermal Grizzly introduces the Thermal Putty series, a new product line specifically developed for upgrading graphics cards and replacing thermal pads between PCBs and heatsinks. However, the Thermal Putty can also be used by hobbyists and experienced technicians for a variety of devices such as notebooks, handhelds, and gaming consoles. Flexible alternative to thermal pads with a wide range of applications Especially suitable for heatsinks with varying distances to key components Pro-version with very high thermal conductivity for high-end components Safe to use thanks to its electrically insulating properties The flexible alternative to thermal pads: The Thermal Grizzly Putty Pro Thermal Grizzly Putty is an electrically non-conductive alternative to conventional thermal pads. As an easy-to-apply, flexible gap filler, it compensates for height differences and is therefore ideal as a replacement for thermal pads on graphics cards and other devices. Typically, several types of thermal pads in varying thicknesses are used from the manufacturer, so when replacing the pads or modifying the cooler to a GPU water cooler, you would need several different pads. This issue is solved by the flexible application of Thermal Grizzly Putty. How much Thermal Grizzly Putty do I need? To upgrade a single, smaller graphics card without a backplate (e.g., GeForce GTX 1060), about one 30-gram jar of Thermal Grizzly Putty is needed. For a larger graphics card such as a GeForce RTX 4090, a 30-gram jar is generally sufficient for the memory (VRAM) and voltage regulators (VRM) on the front side. On the back side, between the PCB and the backplate of larger graphics cards, there is often a uniform, larger gap. Here, about two 30-gram jars or one 100-gram jar are needed if you want to completely fill this space. Three versions for different applications With three different versions, the manufacturer offers the right product for every performance class. The Basic version is suitable for efficient components with low heat generation. The Advance version, with higher thermal conductivity, is intended for midrange components with greater power. For the high-end segment, Thermal Grizzly offers Putty Pro, which provides optimal cooling for your high-end components thanks to its outstanding thermal conductivity. Flexible and safe to use Before application, the target surface should be thoroughly cleaned and degreased, for example with Thermal Grizzly cleaning wipes or standard isopropanol. Thanks to its electrically insulating property, it can be spread over large areas with the included spatula. Alternatively, the Thermal Putty can be shaped by hand into small balls, which can be matched in size to the area to be covered (e.g., VRAM, SMD).
The TRYX ROTA SL ARGB 120 mm fans impress with a well-thought-out design that combines modern RGB aesthetics with powerful cooling features. Thanks to contact-based connectivity and a magnetic connection cable, the setup can be completed especially quickly and neatly—ideal for demanding builds with minimal cable clutter. 120 mm ARGB fan with contact-based plug-in system Magnetic connection cable for easy control & installation Compatible with KANALI software & common ARGB motherboards Max. 28.87 dB(A): whisper-quiet performance in continuous operation Fluid dynamic bearing: durable & low vibration Large vibration dampers: rubber pads for vibration reduction TRYX ROTA SL ARGB 120 mm fans: Clean cable management through contact-based connection The fans communicate via touch-based contact points. This eliminates the classic cabling between fans—for a tidy interior in your case. Everything is connected by a single magnetic cable that transfers both power and ARGB signals. Case fans with perfect RGB effects Each fan features 8 ARGB Gen2 LEDs, allowing for the display of up to 16.7 million colors. Whether via your motherboard or the TRYX KANALI software—you have full control over colors and effects. Quiet and vibration-free—ideal for whisper-quiet builds With only 28.87 dB(A) at maximum operation, the ROTA SL ARGB fans are among the quietest in their class. The integrated fluid dynamic bearing ensures long-lasting smooth operation, while the large rubber pads effectively decouple vibrations from the case.
AiO water cooling with a 240 mm large and 30 mm thick radiator High-performance Asetek Adela pump with 3,600 RPM 2x 120 mm ROTA-ARGB fans with high airflow and static pressure Anamorphic, rotatable 3D AMOLED display with 2K resolution and 60 Hz Simple setup: Control your display via KANALI software hub Compatible with AMD sockets AM5 / AM4 and Intel LGA 1851 / 1700 / 1200 / 115x TRYX PANORAMA SE ARGB 240: High-performance water cooling with innovative display The TRYX PANORAMA SE ARGB AiO water cooling combines state-of-the-art cooling technology with customizable ARGB lighting and a unique 3D AMOLED display, giving your gaming PC a new visual and performance edge. Equipped with a 27 mm thick 240 mm radiator, high-performance ARGB PWM fans, and a reliable Asetek Adela pump, this all-in-one solution provides excellent cooling performance for your hardware. Thanks to the well-thought-out design, installation is quick and straightforward. Curved, rotatable 3D AMOLED display for impressive visuals The highlight of the TRYX PANORAMA SE AiO is the anamorphic and rotatable 3D AMOLED display. The scratch-resistant screen offers you unparalleled features: Captivating technology, impressive visuals The curved 3D AMOLED display sets new standards and creates an impressive 3D depth effect directly in your gaming PC—no special glasses required. Whether animated wallpapers, stunning graphics, or system information—the content appears vivid and tangible. With the waterfall mode, you can let content flow over the edge of the display, creating a unique look. Using the KANALI software hub, you can bring your own 3D images and videos to life in full glory on the display. The best part? The software is continuously updated with new, fascinating content, so you always have new ways to customize your setup. With this water cooling, every glance at your PC becomes a real experience. Efficient cooling performance and reliable operation The TRYX PANORAMA SE 240 features a robust aluminum radiator that ensures optimal heat dissipation. The circulating coolant is driven by a powerful Asetek Adela pump, which operates especially quietly despite its high performance. Thanks to high-volume tubing, the coolant circulates efficiently, resulting in low and stable temperatures for your components. Powerful and quiet fans with stylish lighting Optimal airflow is provided by the two included 120 mm fans with customizable ARGB lighting. With a maximum airflow of 112.29 m³/h and a static pressure of 1.8 mmH2O, these fans ensure efficient cooling even during intensive use. Meanwhile, the noise level remains very low at just 27.86 dB(A), so you’ll barely notice the powerful cooling.
