Jahutid ja lisad

Toote kirjeldus inglise keeles:With the Crystal Link Tubes, Waku specialist Bitspower presents a very interesting solution for water enthusiasts who are not completely unskilled in their craft. These are solid tubes of acrylic plastic, which can be cut by the user to the required length and bent with the aid of a heat source suitable. The resulting possible connection of the individual water cooling parts with longer dead straight sections and exactly curved radii is a visually appealing alternative to the traditional connection by means of hoses dar. For example, if you use a hot air gun and the acrylic tube heated with it for some time, the material is so soft that one It can easily bend into the desired radius and holds as long until the acrylic has cooled and the now bent tube hardens again. It does not get any more individual Everything you need can be created here and even adjusted later. Ideally, in addition to a hot air gun and gloves you have a silicone rod (or something similar flexible, but heat-resistant) to hand, which one pushes into the tube in advance, so that the soft tube gets no kink when bending. The transparent-blue Crystal Link Tube offered here has an outer diameter of 12 mm and an inner diameter of 10 mm. The length is 100 cm. It can be used in conjunction with bit-power adapter fittings from the C47, C48 and ML series. Technical details:Material: acrylic glass (PMMA)Colour transparentOuter diameter: 12 mmInner diameter: 10 mmLength: 500 mmCompatibility: C47 Series Bit Power Fittings and Adapters C48 Bit Power Fittings and Adapters C48 Series Bit Power Fittings and Adapters

Vier Austauschstreben von Watercool, für Heatkiller Tube 200 Ausgleichsbehälter, aus eloxiertem Aluminium in Rot, 200 mm Länge

Watercool Heatkiller tank holder, short (30230)

Set mit 2 Klemmen zur Installation eines Lüfters (Standard & Non-Standard) in 140 mm Größe am Prolimatech Megahalems

Schrauben-Set von Lian Li zur Installation eines Lian Li CB-01 CPU-Waserkühler auf einen LGA-2011(-3)-Sockel

Toote kirjeldus inglise keeles:Passive cooling solution at 26mm heightCopper skived-fin and copper baseIntel LGA2011/2066 compatible

The Arctic thermal pads are ideal for efficiently exchanging heat between different components. Thanks to the high quality of workmanship and excellent thermal conductivity, the pads are used in many places on computers and electronic components. The thermal pad, which is based on silicone and a special filler, far outperforms generic and performance-oriented pads. In a test by PC Games Hardware (11/2018), the "excellent processability and reusability in every respect" was praised. In combination with the fair price and good performance, our thermal pad was recommended as a "price-performance tip". Thanks to its low hardness and good compression properties, the thermal pad acts as a perfect gap filler and easily bridges uneven surfaces and air gaps. The ARCTIC Thermal Pads are non-adhesive and can therefore be placed precisely. Installation is child's play and therefore perfect for beginners. The pad contains no metal particles, is electrically insulating and not capacitive. Handling is therefore safe since contact with electrical parts does not lead to damage. Technical specifications: Dimensions 120 x 20mm Contents: 2 pieces Thickness 0.5 mm Thermal conductivity 6.0 W / mK Hardness 25 shore 00 Relative density 3.2 g / cm³ colour blue Operating temperature -40 ~ 200 ℃ Volume resistance 1 X 1012 Ω-cm Interruption voltage 12 KV / mm Draw resistance 2.5 Kgf / cm² Elongation 45% Dielectric constant 14.1816 ε at 60 Hz 13.0264 ε at 1K Hz 13.0264 ε at 1M Hz Flammability V-0

Thermal Grizzly Liquid Metal Applicator

Preiswerter, leistungsstarker 360er-Tripleradiator mit Kupferlamellen & 2 Rohrreihen aus aqua computers airplex radical Series

The cuplex kryos NEXT marks a new milestone in CPU water block development. Every detail has been analyzed, optimized and tested to achieve perfection in cooling performance, installation procedure and product features. The result is not just a CPU water block with outstanding performance - it is a product series with various models differing in color and functionality. The VARIO models are the first CPU water blocks globally to incorporate a real-time adjustable base - never before has it been possible to adjust the geometry of a CPU block to perfectly fit the CPU while the PC is in operation. Models with VISION module are equipped with modern electronics: High resolution OLED display, integrated water temperature sensor and USB interface are just three of the features.Base part with micro structureThe base part of the cuplex kryos NEXT is equipped with an extremely fine micro structure, the structural width is lower than 200 µm. The coolant is injected centrally through a slot-shaped nozzle and then runs to both sides of the structure. The base itself is manufactured from copper, nickel plated copper or .925 sterling silver depending on model.Retention systemThe cuplex kryos NEXT retention system consists of 2.5 mm thick stainless steel plates equipped with nickel plated spring cups. Springs and knurled screws secure the water block on the motherboard, the retention system has a very clean look when installed. All retention system versions feature a mechanical stop for optimum clamping force and even force distribution. The knurled screws can be installed by hand, additionally a hexagon socket wrench can be used for easy installation.Water blocks for socket 115x or AM3 include a steel back plate with silicone insulation to stabilize the CPU region of the motherboard. Socket 2011 or AM4 motherboards already include a back plate as part of the CPU socket, therefore no additional back plate is required.For optimum performance, every cuplex kryos NEXT ships with outstanding thermal compound. A syringe with 0.5 grams of Thermal Grizzly Kryonaut is included, complete with plastic spatula. This compound has a high thermal conductivity and spreads out thin and evenly between CPU and water block due to its low viscosity. The amount is sufficient for approximately five applications.Color variantsThe top part of the water block is available in various materials and coatings:Acetal black: Shiny black high-tech plasticAcrylic glass: Transparent body suitable for illuminationCopper: Reddish glossNickel plated brass: Bright metallic glossPVD plated brass: High quality multi layer coating, dark metallic glossMaterial combinationCopper/copper: Top part copper, base copperTechnical detailsDimensions: Socket AM4: 111 x 75 x 22 mm (not including screws)Connection threads: G1/4Distance between threads: 24 mmScope of delivery Water block Mounting material (screws, springs, etc.) Thermal compound Thermal Grizzly Kryonaut, approx. 0.5 grams in syringe Plastic spatula Instruction manual

RGB LED ring for reservoirs, inner diameter 60 mm, proprietary 4-pin connector for RGBpx components from Aquacomputer, compatible with D5 NEXT and QUADRO, Attention: This LED ring works exclusively with RGBpx components from Aquacomputer

Now finally also with us the Black ICE Nemesis radiators. The Black Ice® Nemesis® GTS radiators are the next generation of computer radiators from Hardware Labs. These radiators offer an improved cooling performance when using

The Kaze Flex RGB PWM series combines the award-winning technology of the Kaze Flex fans with an optical revision and RGB LEDs. The all-black frame and decouplers emphasize the translucent fan blades illuminated by eight LEDs. A 4-pin 12V RGB connector allows regulation by standard RGB controllers. Thanks to an additional pass-through plug, several fans can be chained together. The outstanding performance of the Kaze Flex range remains untouched. The Sealed Precision FDB bearing ensures a service life of more than 120 000 hours. Three performance levels offer an individual solution for every application. A regular RGB fan version is also available. Technical Details Dimensions: 120 x 120 x 27 mm Fan Speed: 300 - 1200 ± 10% rpm Noise Level: 4.0 - 24.9 Airflow: 16.6 - 51.17 CFM = 28.2 - 86.9 m³/h Static Pressure: 0.0763 - 1.05 mmH²O | 0.75 - 10.3 Pa Voltage: 12 V Amperage: 0,09 A / 0,13 A / 0,40 A Amperage LED: 0,40 A / 0,40 A / 0,40 A Power Input: 1,08 W / 1,56 W / 5,52 W Weight: 140 g Connector: 4-pin, 4-pin 12V RGB Accessory: Molex-Adaptor, 4x screws Bearing: Sealed Precision Fluid Bearing MTTF: 120.000 Hours (25°C)

Die Kaze Flex RGB PWM Lüfterserie vereint die mehrfach ausgezeichnete Technik der Kaze Flex Lüfter mit einer optischen Überarbeitung und RGB LED Beleuchtung. Die ganz in schwarz gehaltenen Rahmen und Entkoppler betonen die durch acht LEDS beleuchteten, transluzenten Lüfterblätter. Ein Standard 4-Pin 12V RGB Anschluss ermöglicht die Steuerung durch eine Viehlzahl unterschiedlicher RGB Controller der gängigen Mainboardhersteller. Dank einer durchgeschliffenen Buchse können auch mehrere Lüfter in Reihe geschaltet werden. Die hervorragenden Leistungsdaten der Kaze Flex Reihe bleiben dabei unangetastet. Auch hier sorgt das Sealed Precision FDB Lager für eine Lebensdauer von über 120.000 Stunden. Je nach Anwendungszweck gibt es drei verschiedene Leistungsstärken. RGB LED Beleuchtung Acht ringförmig um den Lüftermotor angeordnete RGB LEDs erzeugen eine durchgängige und kräftige Beleuchtung über die transluzenten Lüfterblätter. Die LEDs werden über ein standard 4-Pin RGB Kabel betrieben und lassen sich so über die gängigen Systeme verschiedener Mainboardhersteller direkt steuern. Kompatibel sind, unter anderem, RGB Systeme wie ASUSTM Aurora Sync, ASRockTM RGB LED, MSITM Mystic Light Sync und GigabyteTM RGB Fusion. Sealed Precision FDB Um hohe Laufruhe und Langlebigkeit zu garantieren, nutzen die Lüfter aus der Kaze Flex Reihe ein in sich geschlossenes Flüssigkeitslager (Sealed Precision FDB). Das Lager und die Spindel sind komplett aus hochwertigem, komprimiertem Metall gefertigt und werden durch einen speziellen, bis zu 250C° resistenten Ölfilm geschmiert. Dies verringert die Reibung drastisch und sorgt so für hohe Laufruhe und reduzierten Verschleiß, was in einer durchschnittlichen Lebensdauer von 120.000 Stunden resultiert. Integrierte Entkoppler Die Kaze Flex Lüfterserie wurde mit vibrations- und stoßdämpfenden Gummipolstern an den tunnellosen Schraubenlöchern ausgestattet. Diese Entkoppler verhindern effektiv die Weitergabe von eventuell auftretenden Vibrationen und tragen zu einem geräuscharmen Betrieb bei. Vielseitige Einsatzmöglichkeiten Die Kaze Flex RGB PWM Lüfterserie ist in drei Leistungsstärken verfügbar und bietet eine individuelle Lösung für jeden Anwendungsbereich. Alternativ ist außerdem eine ungeregelte RGB Variante erhältlich. Ausstattung Die Kaze Flex 120 RGB Lüfter sind je einem 50 cm langen, gesleevtem Anschlußkabel, sowie einem 4-Pin RGB Kabel mit einem zuschätzlichen, durchgeschliffenem Stecker. Dem Lüfter liegt außerem ein Adapter für den direkten Anschluß an einem Netzteil bei. Techniche Daten Abmessungen: 120 x 120 x 27 mm Lüfterdrehzahl: 300 - 800 ± 10% upm Geräuschpegel: 4,0 - 14,5 dBA Luftdruchfluss: 16,6 - 43,03 CFM = 28,2 - 73,1 m³/h Statischer Druck: 0,0763 - 0,49 mmH²O | 0,75 - 4,8 Pa Betriebsspannung: 12 V Stromstärke: 0,09 A / 0,13 A / 0,40 A Stromstärke LEDs: 0,40 A / 0,40 A / 0,40 A Leistungsaufnahme: 1,08 W / 1,56 W / 5,52 W Gewicht: 140 g Anschluss: 4-pin, 4-pin 12V RGB Zubehör: 3 zu 4-pin Molex-Adapter, 4x Schrauben Lager: geschlossenes Flüssigkeitslager MTTF: 120.000 Stunden (25°C)

Die Kaze Flex RGB Lüfterserie vereint die mehrfach ausgezeichnete Technik der Kaze Flex Lüfter mit einer optischen Überarbeitung und RGB LED Beleuchtung. Die ganz in schwarz gehaltenen Rahmen und Entkoppler betonen die durch acht LEDS beleuchteten, transluzenten Lüfterblätter. Ein Standard 4-Pin RGB Anschluss ermöglicht die Steuerung durch eine Viehlzahl unterschiedlicher RGB Controller der gängigen Mainboardhersteller. Dank einer durchgeschliffenen Buchse können auch mehrere Lüfter in Reihe geschaltet werden. Die hervorragenden Leistungsdaten der Kaze Flex Reihe bleiben dabei unangetastet. Auch hier sorgt das Sealed Precision FDB Lager für eine Lebensdauer von über 120.000 Stunden. Je nach Anwendungszweck gibt es drei verschiedene Leistungsstärken. Eine per PWM gesteuerte Version ist ebenfalls verfügbar. RGB LED Beleuchtung Acht ringförmig um den Lüftermotor angeordnete RGB LEDs erzeugen eine durchgängige und kräftige Beleuchtung über die transluzenten Lüfterblätter. Die LEDs werden über ein standard 4-Pin RGB Kabel betrieben und lassen sich so über die gängigen Systeme verschiedener Mainboardhersteller direkt steuern. Kompatibel sind, unter anderem, RGB Systeme wie ASUSTM Aurora Sync, ASRockTM RGB LED, MSITM Mystic Light Sync und GigabyteTM RGB Fusion. Sealed Precision FDB Um hohe Laufruhe und Langlebigkeit zu garantieren, nutzen die Lüfter aus der Kaze Flex Reihe ein in sich geschlossenes Flüssigkeitslager (Sealed Precision FDB). Das Lager und die Spindel sind komplett aus hochwertigem, komprimiertem Metall gefertigt und werden durch einen speziellen, bis zu 250C° resistenten Ölfilm geschmiert. Dies verringert die Reibung drastisch und sorgt so für hohe Laufruhe und reduzierten Verschleiß, was in einer durchschnittlichen Lebensdauer von 120.000 Stunden resultiert. Integrierte Entkoppler Die Kaze Flex Lüfterserie wurde mit vibrations- und stoßdämpfenden Gummipolstern an den tunnellosen Schraubenlöchern ausgestattet. Diese Entkoppler verhindern effektiv die Weitergabe von eventuell auftretenden Vibrationen und tragen zu einem geräuscharmen Betrieb bei. Vielseitige Einsatzmöglichkeiten Die Kaze Flex RGB Lüfterserie ist in drei Leistungsstärken verfügbar und bietet eine individuelle Lösung für jeden Anwendungsbereich. Alternativ ist außerdem eine RGB PWM Variante erhältlich. Ausstattung Die Kaze Flex 120 RGB Lüfter sind je einem 50 cm langen, gesleevtem Anschlußkabel, sowie einem 4-Pin RGB Kabel mit einem zuschätzlichen, durchgeschliffenem Stecker. Dem Lüfter liegt außerem ein Adapter für den direkten Anschluß an einem Netzteil bei. Technische Daten Abmessungen: 120 x 120 x 27 mm Lüfterdrehzahl: 1.800 upm Geräuschpegel: 14,5 dBA / 24,9 dBA / 35,8 dBA Luftdruchfluss: 79,76 CFM = 135,5 m³/h Statischer Druck: 2,40 mmH²O / 25,3 Pa Betriebsspannung: 12 V Stromstärke: 0,09 A / 0,13 A / 0,40 A Stromstärke LEDs: 0,40 A / 0,40 A / 0,40 A Leistungsaufnahme: 1,08 W / 1,56 W / 5,52 W Gewicht: 140 g Anschluss: 3-pin Zubehör: 3 zu 4-pin Molex-Adapter, 4x Schrauben Lager: geschlossenes Flüssigkeitslager MTTF: 120.000 Stunden (25°C)

Die Kaze Flex RGB Lüfterserie vereint die mehrfach ausgezeichnete Technik der Kaze Flex Lüfter mit einer optischen Überarbeitung und RGB LED Beleuchtung. Die ganz in schwarz gehaltenen Rahmen und Entkoppler betonen die durch acht LEDS beleuchteten, transluzenten Lüfterblätter. Ein Standard 4-Pin RGB Anschluss ermöglicht die Steuerung durch eine Viehlzahl unterschiedlicher RGB Controller der gängigen Mainboardhersteller. Dank einer durchgeschliffenen Buchse können auch mehrere Lüfter in Reihe geschaltet werden. Die hervorragenden Leistungsdaten der Kaze Flex Reihe bleiben dabei unangetastet. Auch hier sorgt das Sealed Precision FDB Lager für eine Lebensdauer von über 120.000 Stunden. Je nach Anwendungszweck gibt es drei verschiedene Leistungsstärken. Eine per PWM gesteuerte Version ist ebenfalls verfügbar. RGB LED Beleuchtung Acht ringförmig um den Lüftermotor angeordnete RGB LEDs erzeugen eine durchgängige und kräftige Beleuchtung über die transluzenten Lüfterblätter. Die LEDs werden über ein standard 4-Pin RGB Kabel betrieben und lassen sich so über die gängigen Systeme verschiedener Mainboardhersteller direkt steuern. Kompatibel sind, unter anderem, RGB Systeme wie ASUSTM Aurora Sync, ASRockTM RGB LED, MSITM Mystic Light Sync und GigabyteTM RGB Fusion. Sealed Precision FDB Um hohe Laufruhe und Langlebigkeit zu garantieren, nutzen die Lüfter aus der Kaze Flex Reihe ein in sich geschlossenes Flüssigkeitslager (Sealed Precision FDB). Das Lager und die Spindel sind komplett aus hochwertigem, komprimiertem Metall gefertigt und werden durch einen speziellen, bis zu 250C° resistenten Ölfilm geschmiert. Dies verringert die Reibung drastisch und sorgt so für hohe Laufruhe und reduzierten Verschleiß, was in einer durchschnittlichen Lebensdauer von 120.000 Stunden resultiert. Integrierte Entkoppler Die Kaze Flex Lüfterserie wurde mit vibrations- und stoßdämpfenden Gummipolstern an den tunnellosen Schraubenlöchern ausgestattet. Diese Entkoppler verhindern effektiv die Weitergabe von eventuell auftretenden Vibrationen und tragen zu einem geräuscharmen Betrieb bei. Vielseitige Einsatzmöglichkeiten Die Kaze Flex RGB Lüfterserie ist in drei Leistungsstärken verfügbar und bietet eine individuelle Lösung für jeden Anwendungsbereich. Alternativ ist außerdem eine RGB PWM Variante erhältlich. Ausstattung Die Kaze Flex 120 RGB Lüfter sind je einem 50 cm langen, gesleevtem Anschlußkabel, sowie einem 4-Pin RGB Kabel mit einem zuschätzlichen, durchgeschliffenem Stecker. Dem Lüfter lie gt außerem ein Adapter für den direkten Anschluß an einem Netzteil bei. Techniche Daten Abmessungen: 120 x 120 x 27 mm Lüfterdrehzahl: 1.200 upm Geräuschpegel: 14,5 dBA / 24,9 dBA / 35,8 dBA Luftdruchfluss: 51,17 CFM = 86,9 m³/h Statischer Druck: 1,05 mmH²O / 10,03 Pa Betriebsspannung: 12 V Stromstärke: 0,09 A / 0,13 A / 0,40 A Stromstärke LEDs: 0,40 A / 0,40 A / 0,40 A Leistungsaufnahme: 1,08 W / 1,56 W / 5,52 W Gewicht: 140 g Anschluss: 3-pin Zubehör: 3 zu 4-pin Molex-Adapter, 4x Schrauben Lager: geschlossenes Flüssigkeitslager MTTF: 120.000 Stunden (25°C)

3x PWM-Lüfter mit Alu-Rahmen und adressierbaren RGB-LEDs, 900 - 1800 U/min, max. 98,5 m³/h Fördervolumen, max. 1,46 mmH2O statischer Druck, inkl. Lüfter-Hub & RGB-Hub/Fernbedienung

Inter-Tech Kühler R-27 3HE Aktiv Intel Socket LGA 2011/2066

Bei der Entwicklung des neuen BioniX P140 wurde besonders Wert auf einen fokussierten Luftstrom und einen hohen statischen Druck gelegt. Der Lüfter garantiert damit eine äußerst effiziente Kühlung, auch bei erhöhtem Luftwiderstand. Daher ist der BioniX P140 besonders für eine Nutzung an Kühlkörpern, Radiatoren sowie auch bei Lochblenden und Filtern geeignet. Mit einem Neodym-Eisen-Boron Magnetring der neuesten Generation ist der BioniX P140 deutlich effizienter als seine Vorgänger. Ohne Kompromisse bei der Leistung spart dies Energie und senkt die Spulentemperatur des Motors deutlich. Das Betriebsgeräusch des neu entwickelten ARCTIC Motors ist selbst bei geringster Drehzahl kaum wahrnehmbar. Der Motor der P-Lüfter erzeugt dank Sinus-Magnetisierung nur 5 % der Kommutationsschwingungen eines herkömmlichen Gleichstrommotors. Somit besteht dank der gleichmäßigen Kraftverteilung kein Bedarf an einer Gummipufferung. Technische Daten Lüfter: 140 mm, 200 - 1.950 U/min (PWM gesteuert) Luftstrom: 77.6 CFM / 131.92 m³/h (@ 1.950 U/min) Geräuschpegel: 0.45 Sone (@ 1.950 U/min) Statischer Druck: 2.85 mm H2O(@ 1.950 U/min) Typische Spannung: 12 V DC Kabellänge: 400 mm PST Kabellänge: 50 mm

Arctic P12 TC (black / black)

Tootjaleht: http://www.scythe-eu.com/en/products/cpu-cooler/mugen-5-argb-plus.html Mõõtmed koos ventilaatoriga(WxHxD): 136 x 134 x 157.5 mm Intel®:Socket LGA775 Socket LGA1150 Socket LGA1151 Socket LGA1155 Socket LGA1156 Socket LGA1200 Socket LGA1366 Socket LGA2011 / 2011-v3 (Square ILM) Socket LGA2066 AMD®:Socket AM2 Socket AM2+ Socket AM3 Socket AM3+ Socket AM4 Socket FM1 Socket FM2 Socket FM2+ Lisana kaasas: Mounting parts for Intel and AMD sockets, thermal grease, Adjustalbe RGB fan, Adjustable RGB top cover, Adjustable RGB Controllerfan clips, manual Ventilaatori andmed: Model Name - Kaze Flex 120 ARGB PWM Dimensions - 120 x 120 x 27 mm / 4,72 x 4,72 x 1,06 inch Noise Level - 4,0 ~ 29,75 dBA Air Flow - 16,6 ~ 66,47 CFM / 28,20 ~ 112,93 m3/h Fan Speed - 300 (+-200 rpm) ~ 1.500 rpm (+-10%) (PWM-controlled) Static Pressure - 0,75 ~ 16,38 Pa / 0,0762 ~ 1,67 mmH²O Bearing Type - Sealed Precision FDB Voltage - 12V MTTF - 120.000 Hours (25°C)

130x120x130mm (WxHxD) - 1x 120x120x27mm, 300-1200rpm, 28.2-86.93m³/​h, 4-24.9dB(A) - 4-Pin PWM - Socket 775, 1150, 1151, 1155, 1156, 1366, AM2, AM2+, AM3, AM3+, AM4, FM1, FM2, FM2+

Alphacool Christmas tree connector 1/4 "- 16 / 10mm, black (17232)

Alphacool 1/4" coupling - 16/13 mm, Chrome (17195)

This G1/4 Inch screw plug can be used for many applications. So you can use it for the radiator, reservoir and some other components. Alphacool have this plug screw in 2 different colors: Chrome and Deep Black. Thus you can now bring your modding project in a uniform color to shine . Technical specifications: Material: Brass Colour: Deep Black Thread size: G1/4 Inch Height without thread: 4,25mm Top diameter: 18mm Extent of delivery: 1x Alphacool Screw with O-Ring G1/4 Inch - Deep Black

Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: L-ConnectorThis 90° angle adapter has a ¼” internal screw thread on both sides. Its compact shape makes it perfect for hard-to-reach spaces. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Length: 25mm Width: 25mm Height: 18mm Scope of Delivery: 1x Alphacool Eiszapfen L-connector G1/4 inner thread to G1/4 inner thread - deep black

240er-Radiator von Bitspower Touchaqua, 27 mm Tiefe, Kühlkörper aus Kupfer, für 4x 120-mm-Lüfter, Schwarz

The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical dataDimensions (L x W x H)326 x 144 x 45mmQuantity of cooling channels28Cooling channelsCopperColorblackFan threadM3Connection6x G1/4"SlatsCopperNumber of fans2Thickness39 - 49mmHousingSteelManufacturerAlphacoolFins per inch12Pressure tested0,8 barFan size140mm

Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This fitting can be used to connect a 16/10 hose with a 1/4“ thread. The fitting is angled at 90° and is revolvable, making it ideal for easy hose routing in the system. Technical specifications: Material: Brass, chromatizedColour: Deep Black Dimensions:Length: 39mmWidth: 16x22mmHeight: 32mm Hose size compatibility : 16/10mm Extent of delivery:1 x Alphacool HF Screw connector 90° G1/4 outer thread on 16/10 revolvable - Deep Black This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)

The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.This Radiator can discharge up to 1400 W at an ambient temperature of 30°C and fans with 4000 rpm.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical DataDimensions (L x W x H)277 x 124 x 46mmQuantity of cooling channels24Cooling channelsCopperColorblackFan threadM3Connection6x G1/4"SlatsCopperNumber of fans2Thickness39 - 49mmFan size120mmHousingSteelManufacturerAlphacoolFins per inch12Pressure tested0,8 bar

The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. In structure, the Alphacool NexXxoS X-Flow Radiators differentiate materially from the standard radiators. The X.Flow Radiators are designet for high flow rates. The bevelled copper chambers on both sides have an identical structure. This Water is jetting at the same time through all avialable channels to the other chamber to whitch it then leaves the radiator.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities.Here, too, Alphacool provides the popular sizes of the 120mm series. Different thicknesses, 30mm, 45mm and 60 mm underscore the broad spectrum that cover these radiators. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical dataDimensions (L x W x H)532 x 124 x 60mmQuantity of cooling channels36Thickness49 - 69mmKühlkanäleCopperColorblackFan threadM3Connection6x G1/4"SlatsCopperFan size120mmHousingSteelPressure tested0,8 barManufacturerAlphacoolNumber of fans4Fins per inch10

ARCTIC BioniX P120 A-RGB 120mm

Optimised for Static Pressure During the development of the new P14 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM PST is particularly suitable for use on heatsinks and radiators. More Efficient Technology The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. Maximum Quietness, Minimum Vibration Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years. 200 to 1700 RPM regulated via PWM PST With a wide range of regulation and the PWM Sharing Technology (PST), the P14 PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed. High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data Performance Fan Speed: 200 - 1700 rpm Airflow: 72.8 CFM/ 123.76 m³/h Static Pressure: 2,40 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: PST Connector: 4-Pin Connector + 4 Pin Socket Fan Bearing: Fluid Dynamic Bearing Electric Characteristics Typical Voltage: 12 V DC Starting Voltage: 3.9 V Current: 0.12 A Cable Lenght: 400 mm Size & Weight Lenght: 140 mm Width: 140 mm Height: 27 mm Weight: 194 g

Deepcool CPU Air Cooler AS500 Cooler

140 mm PWM-Lüfter, mit Sealed Precision FDB-Lagern für hohe Lebensdauer & Laufruhe, 300 - 1.200 U/Min bei max. 19,4 dB(A), 28,5 - 114,3 m³/h Airflow, 2,81 mmH2O Luftdruck, mit RGB-Beleuchtung

140 mm PWM-Lüfter mit 120 mm Lochabstand, mit Sealed Precision FDB-Lagern für hohe Lebensdauer & Laufruhe, 300 - 1.800 U/Min bei max. 26,45 dB(A), 28,5 - 171,3 m³/h Airflow, 2,81 mmH2O Luftdruck, mit RGB-Beleuchtung