Passiv Control is the optimal solution for controlling your MO-RA IV radiator The MO-RA IV Passive Control Module is the ideal control unit for your MO-RA IV radiator. All the prerequisites have been created to achieve maximum performance even over long distances. This is achieved through an amplified and conditioned PWM and tacho signal for stable transmission. The 5 volt rail provides 30 watts of power and the 12 volt rail provides 120 watts of power. This means that 2 D5 pumps, 18 fans and up to 3 aRGB modules can be operated without any problems. MO-RA IV “Link” the rule and control interface The connection from the PC to the MO-RA IV is established via the compact link module. The link module is mounted in the PC case and connected to the mainboard. The passive control module is installed on the back of the MO-RA IV radiator. A 1.5 meter long main connection cable then establishes the communication between the mainboard or computer and the MO-RA IV unit. The control and monitoring takes place with the software provided by the respective mainboard manufacturer. You can monitor a pump signal or a fan side on the radiator. The fan side can be selected using a toggle switch on the passive control module. Appropriate lighting has also been taken into account. Up to three aRGB modules can be connected and configured and adjusted using the mainboard software. Comprehensive MO-RA IV Control Set The MO-RA IV Control Module is delivered as a complete set. The set contains all components relevant for assembly. A special highlight is the hidden fan hub, which is installed on the underside of the radiator and enables hidden cabling. The same applies to the 1.5 meter long main connection cable, which is also optionally available in a 3 meter version. Overall, only one cable, the main cable, is required for the entire control and monitoring. The integrated 2-port USB hub (USB 2.0) enables the connection of e.g. USB-supported pumps or other USB devices. Technical data: Dimensions: 63x92x20mm Scope of delivery MO-RA IV 200/400 1 x MO-RA IV Passive CONTROL 1 x MO-RA IV LINK 1 x WATERCOOL MAIN CABLE (1.5m) 1 x MO-RA IV FAN HUB 1 x cable set for assembly
The Alphacool Apex series represents maximum cooling performance, exceptional design, and premium material selection for high-end custom water cooling systems. The Alphacool Apex 1 is the first CPU water block in the Apex series and combines all its unique features in a robust CPU cooler. In the Intel version of the Apex 1 CPU cooler, the cooler fully covers the entire socket and CPU, including its hotspot, ensuring exceptional cooling performance. Alphacool relies on its proven cross-slot technology and introduces the 3D Jetplate 2.0, an evolution of the original 3D Jetplate. The improved design of the Jetplate creates higher water pressure. Additionally, a pre-chamber located before the 3D Jetplate 2.0 calms the incoming water and evenly distributes it across the Jetplate and the cooling fins beneath the cooler base. The lower part of the Apex 1 CPU cooler is crafted from a solid block of copper. The connection section is made from brass, and both components are precisely CNC-machined from their respective material blocks. The cooler is assembled with an aluminum cover that nearly encloses the entire unit. Fine Apex design elements on the top surface allow the uniform illumination of the aRGB lighting to shine through. Moreover, an additional lighting element on the right side of the cooler emits a diffused glow towards the RAM slots. The Apex 1's cooling block is specifically designed to cover both the CPU socket and the mounting holes, giving it a sleek and seamless appearance. Despite this sophisticated design, installation remains straightforward: the cooler is positioned on the top of the motherboard while the backplate is secured from underneath using screws. Technical data Dimensions (L x W x H): 88,00 x 88,00 x 32,30mm Cooler material: Nickel plated copper Material cooler top: Aluminum Material threads: Nickel plated brass Threads: 2x G1/4“ Fin thickness: 0,4mm Fin distance: 0,4mm Pressure tested: 0,8 bar Maximum operating temperature: 60°C Weight: 890g Color: Base: Black | Accent: Chrome Warranty: 5 years ???? [Warranty Terms](https://www.alphacool.com/en/warranty-terms)
Water block for Intel CPUs, compatible with sockets LGA 115X, 1700, X99, and X299, featuring aRGB lighting, acrylic window with white trim, and a nickel-plated copper baseplate This water block is perfect as the foundation for your custom loop: it keeps your CPU especially cool with ultra-thin fins that allow water to flow freely. Apart from its cooling performance, the water block also features aRGB lighting that highlights the acrylic top in colour. Water block for Intel mid-range and high-end CPUs Ultra-thin fins provide a large surface area for heat exchange Acrylic top with coloured lighting for a stylish look Compatible with most motherboards Two G1/4” ports for easy integration into your loop Barrow Kepler-Series CPU Water Block: Water block with illuminated acrylic cover Besides its adequate cooling performance, this water block also makes a visual impact: the aRGB lighting shines through the acrylic top, highlighting the heart of your build – your CPU. To allow you to customise the lighting according to your preferences, it is controllable via a 3-pin connection from your motherboard. Suitable for mid-range and high-end Intel CPUs Whether old or new: the water cooler is compatible with sockets 115X, 1700, X99, and X299. This means that both mid-range and high-end CPUs can be efficiently cooled by this cooler. As is common in many water blocks, this one also features two G1/4” ports to guarantee maximum compatibility.
The TRYX ROTA SL ARGB Reverse 120mm fans deliver strong airflow and a clean look. They are aimed at gamers and PC enthusiasts who value flexible mounting, tidy cabling, and reliable cooling. Reverse blade design – for an unobstructed appearance despite top cooling performance Magnetic cable for power & ARGB – fewer cables, faster installation Contact points between fans – power and signal transmission without visible wiring Fluid dynamic bearing – quiet operation and long lifespan under continuous use Large decoupling pads – reduced vibrations and lower noise levels Strong airflow at low noise – for undisturbed gaming or working TRYX ROTA SL ARGB Reverse: Reverse blade for flexible builds The reverse blade design allows for reversed airflow direction compared to standard fans. This lets you display the open, illuminated side outwards without compromising on function. This makes it easier to achieve a uniform look on front or side panels. At the same time, the placement for fresh air intake or exhaust remains freely selectable. Tidy cable management The magnetic cable carries power and ARGB signals together, significantly reducing cabling effort. Power and signals are reliably passed from fan to fan via contact points. This speeds up installation, minimises visible cable clutter, and simplifies maintenance. Your build looks clean and the air intake remains unobstructed. Reliable cooling with clear effects The FDB bearing ensures quiet operation and a long service life during continuous use. With up to 116.28 m³/h airflow and 2.49 mmH₂O static pressure per fan, the TRYX ROTA SL ARGB Reverse can handle dense radiators and dust filters. Anti-vibration pads reduce resonance for a pleasant acoustic profile. The ARGB lighting provides even, well-controllable highlights.
The TRYX ROTA SL ARGB Reverse 120 mm fans deliver strong airflow and a clean look. They are aimed at gamers and PC enthusiasts who value flexible mounting, tidy cabling, and reliable cooling. Reverse blade design – for an unobstructed appearance despite excellent cooling performance Magnetic cable for power & ARGB – fewer cables, faster installation Contact points between fans – power and signal transmission without visible wiring Fluid dynamic bearing – quiet operation and long lifespan under continuous use Large decoupling pads – reduced vibrations and lower noise levels Strong airflow at low noise – for undisturbed gaming or work TRYX ROTA SL ARGB Reverse: Reverse blade for flexible builds The reverse blade design enables an airflow direction opposite to that of standard fans. This allows you to display the open, illuminated side outwards without compromising function. This makes it easier to achieve a uniform look on front or side panels. At the same time, the placement for fresh air intake or exhaust remains freely selectable. Tidy cable management The magnetic cable carries power and ARGB signals together, noticeably reducing cabling effort. Power and signals are reliably passed from fan to fan via contact points. This speeds up installation, minimises visible cable clutter, and simplifies maintenance. Your build looks clean and the air intake remains unobstructed. Reliable cooling with clear effects The FDB bearing ensures quiet operation and a long service life under continuous use. With up to 116.28 m³/h airflow and 2.49 mmH₂O static pressure per fan, the TRYX ROTA SL ARGB Reverse can handle dense radiators and dust filters. Anti-vibration pads reduce resonance for a pleasant acoustic profile. The ARGB lighting delivers even, well-controllable highlights.
59–110m³/h airflow per fan, 700–1,500 rpm, quiet & stylish, reverse-blade design with visible ARGB effect, max. 30.6 dB(A) noise level, hydraulic bearing The Jonsbo ZA‑420WR combines three white 140mm reverse-blade fans in a sturdy composite frame—ideal for elegant RGB builds with glass panels or inverted airflow setups. The set stands out with quiet cooling, striking looks, and high-quality construction. Three 140mm reverse-blade fans in a continuous frame—perfect for 420mm radiators ARGB lighting controllable individually via the motherboard PWM control with speeds from 700 to 1,500 RPM for optimal temperature management 59 to 110m³/h airflow per fan with a maximum of 30.6 dB(A) Durable hydraulic bearings for quiet, continuous operation Radiant RGB effects with a clear look Thanks to the reverse-blade design, the illuminated fan surfaces face inwards—perfect for cases with glass fronts or side display. The white color emphasizes the ARGB effect with a reflective play of light. Quiet airflow, showcase-ready With 59 to 110m³/h per fan, the set ensures reliable air circulation for large builds. The low noise level of up to 30.6 dB(A) keeps your system cool—without being distracting. Easy to mount & durable The triple frame makes mounting on 420mm radiators or mesh panels simple. High-quality hydraulic bearings ensure long-lasting operation, making the ZA‑420WR the ideal choice for visually demanding systems intended for continuous use.
59–110m³/h air flow per fan, 700–1,500 rpm, quiet & efficient, reverse-blade design for mirrored ARGB effects, max. 30.6 dB(A) noise level, hydraulic bearing The Jonsbo ZA‑420BR combines three black 140mm reverse-blade fans in a single unified frame. Ideal for showcases and systems with glass fronts or inverted airflow – stylish, powerful, and pleasantly quiet. 3x 140mm reverse-blade fans in a sturdy unified frame – perfect for 420mm radiators ARGB for customised RGB synchronisation with motherboards & controllers PWM control with automatic speed adjustment (700–1,500 RPM) Delivers 59 to 110m³/h airflow per fan at a maximum of 30.6 dB(A) Hydraulic bearings for reliable continuous operation with low noise ARGB lighting effects on the visible side Thanks to the reverse-blade design, the fans display their illuminated side facing the case interior – perfect for glass panels or stylish builds. The fan blades are specially shaped to direct airflow outwards despite the reversed appearance. Quiet airflow with RGB control With up to 110m³/h airflow at just 30.6 dB(A) per fan, the system remains pleasantly quiet even under load. The speed automatically adjusts to cooling needs – providing a balanced performance-to-noise ratio. Durable & easy to install The continuous triple frame simplifies mounting on 420mm radiators or mesh surfaces. The durable hydraulic bearing enables quiet continuous operation with an average lifespan of over 20,000 hours.
Tootekood: DE8 SINGLE FAN WHITEGTIN: 4711527006043Jahutid ja lisad
Darkflash DE8 cooling fan (white)The Darkflash DE8 fan supports 5V ARGB, which allows you to synchronize the backlighting with motherboards from brands such as ASUS, MSI, Gigabyte and ASRock. In the absence of a suitable connector, the fan can be connected to the included controller, which allows you to control the lighting effects directly from the case. In addition, the lighting system supports 16.8 million colors and various modes.Thoughtful blade designThe fan uses 9 specially contoured blades designed for optimized airflow and quieter operation. This design improves cooling efficiency while keeping noise levels low.Quiet operation and long lifeRubber pads are used in the corners of the case to dampen vibrations and reduce resonance. In addition, the Darkflash DE8 is based on hydraulic bearings (Hydro Bearing), which guarantees quiet operation and a service life of up to 40,000 hours. This is a good solution for both users looking for noiseless operation and those who expect reliability for a longer period of time.Striking designThe front of the fan is covered with a CD Spindle surface - these are laser-engraved circles that create a vortex effect during operation. It looks striking especially when juxtaposed with dynamic ARGB backlighting, which can work in full synchronization with the rest of the system. ManufacturerDarkflashModelDE8ColorwhiteFan type120 mm fan with hydraulic bearing (Hydro Bearing)Dimensions120 × 120 × 25 mmFan speed800-1900 ±10% RPMNoise level35.61 dBAAirflow55.22 CFMStatic pressure2.16 mm H₂OCurrentFan: ≤ 0.23 ALED backlight: ≤ 0.27 ALifetime40,000 hours (MTTF)Connectors3-pin ARGB 5V4-pin PWMBacklightingARGBSystem compatibilityASUS Aura SyncMSI Mystic Light SyncGigabyte RGB Fusion 2.0ASRock Polychrome RGB
Tootekood: FAN-HYTE-FA12-MM-4GTIN: 1220000352698Jahutid ja lisad
PWM fans, pack of 4, fluid dynamic bearing, up to 122.3 m³/h airflow, static pressure up to 1.6 mm H₂O, vibration dampers, including PWM splitter The HYTE FA12 fans in a 4-pack offer strong cooling performance with low noise levels and are ideal for gamers, creators, and high-performance gaming PCs. They combine efficient airflow with an elegant design, matching modern cases.Hybrid blade design for balanced airflow and static pressure performanceFluid dynamic bearing for quiet and durable operationPWM control with sleeved cables for precise speed regulationIntegrated vibration dampers reduce vibrations and noiseComplete 4-pack with screws and 4-in-1 splitter for easy installationEfficient Cooling PerformanceThe FA12 fans move up to 122.3 m³/h of air and achieve a static pressure of 1.6 mm H₂O, making them suitable for both case and radiator cooling. PWM control allows dynamic adjustment of fan speed according to temperature requirements.Quiet Operation and ReliabilityWith fluid dynamic bearings, the fans operate particularly quietly at a maximum of 28 dBA and are designed for long service life. Vibration dampers on each fan help reduce transmitted noise.Design & InstallationThe FA12 series is available in several colour variants and can be visually matched to many builds. The 4-pack includes all necessary screws and a PWM splitter to operate multiple fans via a single motherboard connection.
Tootekood: FAN-HYTE-FA12-WW-4GTIN: 1220000352667Jahutid ja lisad
PWM fans, pack of 4, fluid dynamic bearing, up to 122.3 m³/h airflow, static pressure up to 1.6 mm H₂O, vibration dampers, including PWM splitter The HYTE FA12 fans in a 4-pack offer powerful cooling performance with low noise levels, making them ideal for gamers, creators, and high-performance gaming PCs. They combine efficient airflow with an elegant design, perfectly suited to modern cases.Hybrid blade design for balanced airflow and pressure performanceFluid dynamic bearing for quiet and durable operationPWM control with sleeved cables for precise speed regulationIntegrated vibration dampers reduce vibrations and noiseComplete 4-pack with screws and 4-in-1 splitter for easy installationEfficient Cooling PerformanceThe FA12 fans move up to 122.3 m³/h of air and achieve a static pressure of 1.6 mm H₂O, making them suitable for both case and radiator cooling. PWM control allows dynamic adjustment of fan speed based on temperature requirements.Quiet Operation and ReliabilityWith fluid dynamic bearings, the fans operate very quietly at a maximum of 28 dBA and are designed for long service life. Vibration dampers on each fan help reduce transmitted noise.Design & InstallationThe FA12 series is available in several colour variants and can be visually matched to many builds. The 4-pack includes all necessary screws and a PWM splitter to operate multiple fans from a single motherboard header.
The new premium fan series is based on the NB-Blacksilent-Chassis and is equipped with the excellent electronics module NB-EKA Plus and NB-NanoSLI bearings. Both are features that were so far used only in the more complex Multiframe series. Besides the technologically advanced components this fan is also equipped with an individually adaptive cable management. The fan is shipped with a newly developed mounting kit for vibration-free mounting which consists of an optimized "NB-Silentframe" silicone frame with suitable counter-pieces and knurled nuts for tool-free installation. Technical specifications: Dimensions: 120x120x25mm Colour: Black Weight: 120g Nominal voltage: 12V Starting voltage: 4,5V Current draw: 0,16A Nominal speed: 1400rpm (+/-10%) Airflow: 96m³/h / 56,506CFM Noise emission: 20 dB(A) MTBF (25°C): 160000hrs Connector: 3-Pin Molex plug with rpm lead Extent of delivery: 1x Noiseblocker NB-BlackSilentPRO PL2 ( 120x120x25mm ) 1x Fan decoupling 1x 3 PIN fan extension 20cm 1x 3 PIN fan extension 50cm 4x Mounting screws 4x Knurled nuts Tech-Review has tested this product for you!
Fan speed (max): 2200 Fan speed (min): 800 Air flow rates: 34.25 Number of fans: 1 Noise: 25.1 Dimensions: 80 x 80 x 25 mm Weight: 69 Accessories included: - 4x screw- 4x anti-vibration pads Other features: - Voltage: 12V DC- Airflow min .: 12.45 cfm- Number of fan wings: 7- Bearing: hydraulic- Connection: 4 pin- Length of the cable: 30 cm- Min. Noise: 9.1 dB (A)
The final touch for a perfect PC You spend a lot of time to make your PC perfect. You’ve upgraded it for top performance, ultimate quietness, and unbeatable reliability. So what’s next? Our premium upgrade Power Cables, that’s what’s next. High quality, premium function, and flat out good looks come together in our line of premium Power Cables, intended for use with your high capacity be quiet! cable management power supply. These sleeved beauties in black are available in 2 All-in-One-models for maximum convenience and compatibility with all type of cases, and come with a 3 year warranty. Mix and match lengths and connector arrays to achieve the perfect combination of stylish good looks, improved cooling airflow, and peripheral device support.
IntroductionFinding a quiet and efficient cooling fan is the ultimate goal for every enthusiast. The FF121 is a fan grille designed for easy installation with any 120mm fan. The honeycomb pattern on the grille not only reduces wind shear noise but also channels the airflow into more focused beam. Its integrated filter also provides reduced dust buildup to extend the life cycle of components. All in all, the FF121 is an excellent upgrade for any 120mm fans in your system.Special Features- Honeycomb grille increases airflow focus;- Integrated filter provides class leading dust reduction;- Highly compatibility with all 120mm fan.Weight & dimensions20 gDesignBlackOther Featuress120 x 120 x 4.68 mmPerformanceComputer case
Average Particle Size: 0.49 micron (0.000020 inch) Peak: –50°C to 180°C Long-Term: –50°C to 130°C Performance:3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core. Coverage Area:A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches. tootja lehel:http://www.arcticsilver.com/as5.htm
Suurus:120 L x 120 W x 25 H mm tööpinge:3,5-13,8 V testitud:12V õhuvool:124 m3/h õhusurve:2,140 mm/H20 müratase:27,1 dBA kiirus:1800 RPM võimsustarve:2,16 W tootjalehel:http://www.blacknoise.com/en/products/it/7/Noiseblocker-NB_Multiframe_S_Series_120mm
All metal inline coolant filter for keeping accidental debris from damaging the pump or clogging other components. It includes two reusable stainless steel filters with hole sizes of 0.42mm/sq and 0.27mm/sq.G 1/4 BSPP sockets are provided on both sides, with one male and one female for easy installation into the inlet of a water block, pump, or heat exchanger. Nickel-plated brass and stainless steel mesh filters. The filter body can be unscrewed for cleaning or replacement.Toote värvRoostevaba terasLaius32 mmSügavus23,3 mmKõrgus23,3 mmKaal70 g
- True Hi-Flow Design.- Hi-Quality Brass Material.- High Durability Nickel Finished In Carbon Black Color.- Hiding O-Ring Design.- The Best Choice Of Water Cooling Temperature Sensor In Stop Fitting Design.Toote värvMust
Suurus:92 L x 92 W x 25 H mm tööpinge:3,5-13,8 V testitud:12V õhuvool:50 m3/h õhusurve:0,630 mm/H20 müratase:17,5 dBA kiirus:1500 RPM võimsustarve:0,84 W eestikeelne ülevaade:http://youtu.be/HnuOvu39nqk tootjalehel:http://www.blacknoise.com/en/products/it/16/Noiseblocker-NB_BlackSilentFan_92mm
The new premium fan series is based on the NB-Blacksilent-Chassis and is equipped with the excellent electronics module NB-EKA Plus and NB-NanoSLI bearings. Both are features that were so far used only in the more complex Multiframe series. Besides the technologically advanced components this fan is also equipped with an individually adaptive cable management. The fan is shipped with a newly developed mounting kit for vibration-free mounting which consists of an optimized "NB-Silentframe" silicone frame with suitable counter-pieces and knurled nuts for tool-free installation. Technical specifications: Dimensions: 140x140x25mm Colour: Black Weight: 135g Nominal voltage: 12V Starting voltage: 4,5V Current draw: 0,2A Nominal speed: 1700rpm (+/-10%) Airflow: 153m³/h / 90.056CFM Noise emission: 27 dB(A) MTBF (25°C): 120000hrs Connector: 3-Pin Molex plug with rpm lead Extent of delivery: 1x Noiseblocker NB-BlackSilentPRO PK3 ( 140x140x25mm ) 1x Fan decoupling 1x 3 PIN fan extension 20cm 1x 3 PIN fan extension 50cm 4x Mounting screws 4x Knurled nuts This product has been reviewed for you: Tech-Review Hardware-academy
Suurus:92 L x 92 W x 25 H mm tööpinge:3-13,8 V testitud:12V õhuvool:65 m3/h õhusurve:0,870 mm/H20 müratase:20,3 dBA kiirus:1800 RPM võimsustarve:1,32 W eestikeelne ülevaade:http://youtu.be/HnuOvu39nqk tootjalehel:http://www.blacknoise.com/en/products/it/16/Noiseblocker-NB_BlackSilentFan_92mm
Suurus:80 L x 80 W x 25 H mm tööpinge:4,5-13,8 V testitud:12V õhuvool:26 m3/h õhusurve:0,680 mm/H20 müratase:9,7dBA kiirus:1300 RPM võimsustarve:0,48 W tootjalehel:http://www.blacknoise.com/en/products/it/14/Noiseblocker-NB_BlackSilentFan_80mm
The new premium fan series is based on the NB-Blacksilent-Chassis and is equipped with the excellent electronics module NB-EKA Plus and NB-NanoSLI bearings. Both are features that were so far used only in the more complex Multiframe series. Besides the technologically advanced components this fan is also equipped with an individually adaptive cable management. The new 4Pin PWM version can be controlled digitally in between a range of 600-1500rpm and is hence perfect for e.g. application on a CPU cooler. The fan is shipped with a newly developed mounting kit for vibration-free mounting which consists of an optimized "NB-Silentframe" silicone frame with suitable counter-pieces and knurled nuts for tool-free installation. Technical specifications: Dimensions: 120x120x25mm Colour: Black Weight: 120g Nominal voltage: 6-13.2V Starting voltage: 6V Current draw: 0,15A (max) Power consumption: 1.8W Nominal speed: 600-1500rpm (+/-10%) Airflow: 40-100 m3/h (12V) Noise emission:8.24 dB(A) MTBF (25°C): 140 000hrs Connector: 4-Pin Molex plug with PWM and rpm lead PWM Curve: 100%=1500rpm / 75%=1300rpm / 50%= rpm / 25%= 900rpm / 0%= 600rpm Extent of delivery: 1x Fan Noiseblocker NB-BlackSilentPRO PL-PS ( 120x120x25mm ) 1x Mounting kit "vibration free" (Silentframe silicone frame / gasket + knurled nut) Sleeved cable 20cm + 50cm (can be combined)
The new premium fan series is based on the NB-Blacksilent-Chassis and is equipped with the excellent electronics module NB-EKA Plus and NB-NanoSLI bearings. Both are features that were so far used only in the more complex Multiframe series. Besides the technologically advanced components this fan is also equipped with an individually adaptive cable management. The fan is shipped with a newly developed mounting kit for vibration-free mounting which consists of an optimized "NB-Silentframe" silicone frame with suitable counter-pieces and knurled nuts for tool-free installation. Technical specifications: Dimensions: 120x120x25mm Colour: Black Weight: 120g Nominal voltage: 12V Starting voltage: 4,5V Current draw: 0,06A Nominal speed: 900rpm (+/-10%) Airflow: 68m³/h / 40,025CFM Noise emission: 11 dB(A) MTBF (25°C): 180000hrs Connector: 3-Pin Molex plug with rpm lead Extent of delivery: 1x Noiseblocker NB-BlackSilentPRO PL1 ( 120x120x25mm ) 1x Fan decoupling 1x 3 PIN fan extension 20cm 1x 3 PIN fan extension 50cm 4x Mounting screws 4x Knurled nuts Tech-Review has tested this product for you!
Toote kirjeldus inglise keeles:To connect the individual components of the water cooling, the choice of the correct connections and their sufficient number is essential. Otherwise, installation will quickly become a frustrating experience if assembly fails on the wrong or too few connectors and is delayed due to this. Bitspower offers a comprehensive product range that offers the right solution for every requirement - whether adapters, direct hose connections, brackets or distributors. The design is solid and has a sealing ring. Thus, the connections remain tight and ensure high long-term durability. This is a black nickel plated, straight 1/8 inch OD to G1 / 4 inch female adapter designed specifically for the output of an Eheim 1046 pump. Before screwing in the adapter, the sealing ring should be coated with a lubricant, as otherwise it could be pulled out of its groove and exerts too much pressure on the plastic ring of the pump in the upper area. Alternatively, it is sufficient not to fully screw the adapter, but only up to the rubber itself. Technical Details:Material: brass, black nickel platedConnections: Male Thread: 1/8 inch Female Thread: G1 / 4 inchesFor: outlet Eheim pump 1046
The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market. Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs! Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years. Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop. Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length. Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport. Versatility is the essence of the new NexXxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price. Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins. Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted. These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions. Alphacool NexXxos radiators: The one tool for all your cooling needs! Info about the Monsta radiators: The Monsta radiators, with a thickness of 80mm, are the first of their size on the market. Hence we were just as keen on finding out how they perform as the independent reviewers! The tests show that it has significantly increased flow rates than thinner radiators. The cooling performance increased greatly with increased fan speed. Sounds normal, but this radiator shows a different performance profile than standard radiators: At 500rpm the Monsta is slightly better than its 60mm brother, but with increasing fan speed the difference increases: At 800rpm the Monsta already performs much better, and at 1200rpm a Monsta radiator is performing almost as well as a 60mm thick radiator with one fan more, at the same fan speed! This is truly amazing, and all that at this affordable price! Technical specifications: Material internal: Mostly copper Material casing: Side panels steel, threads brass, copper chambers Colour: Black Dimensions (LxWxH): 522 x 124 x 86mm Radiator size: 4x120mm Connection threads: 6x1/4“ Outlet Connection threads: 1x1/4“ Mounting thread size: M3 Pressure tested: 1.5bar Weight: Technical Drawing Download 3D-file (.stp) Extent of delivery: 1x Radiator 5x screw plug 16x M3x30mm hexagon socket screw 16x M3x35mm hexagon socket screw Similar products have been tested for it: Hardwaremax hardwaremAx Tweak (DK)
Dimensions: 30 x 30 x 1,0mm Thermal conductivity: 8.0 W/mk Temperature range: -100°C / +250°C Maximum bridgeable gap: 1,0 mm Muu info: Ei juhi elektrit.
With the Alphacool Eisbaer LT, you get a high-performance compact water cooling system that’s barely inferior to its bigger brother, the Eisbaer AIO. Just like the Eisbaer, the Eisbaer LT distinguishes itself from the usual AIO mix in that Alphacool relied on normal custom components as much as possible during development. This allows the Eisbaer LT to be expanded on not just with the Eisbaer Ready quick connectors but also with connectors using standard G1/4” threads. These can be replaced with other models at any time. Another highlight is the new 25mm thin Slim Radiator, made entirely of copper. Since copper has twice the heat capacity of aluminium, optimal cooling is guaranteed. Cooler and pump The cooler bottom is made entirely of copper and has an ultra-fine cross slot structure. Thanks to those cross slots and a sophisticated nozzle system, heat is absorbed extremely fast and transferred away from the CPU. The built-in DC-LT Ultra Ceramic Low Noise pump is an extremely quiet pump that Alphacool has used in many products. The pump is much stronger than what you’d usually find in AIOs. It can also be throttled with the optional 7V adaptor, decreasing the already low noise generation even further. The pump casing is very flat and the aluminium cap gives it a clean, elegant look. Fittings Alphacool relies on the standard DIY fittings you’d find in any standard water cooling system. Components are made entirely of high-quality brass and use a G1/4” thread. This means fittings can be exchanged easily, just like in a standard system. Maybe you want different tubing or want to switch over to HardTubes – your options are wide open. Quick connectors The Eisbaer LT’s quick connectors make it compatible with all other Eisbaer Ready products, like the Eiswolf GPX-Pro cooler or the Eiswand external radiator. Both products use the same pump – perfect for quickly and easily expanding the cooling loop. Alternatively, you can use the Extension Set or Alphacool HF Quick Connectors (available separately) to integrate other components into the system. Tubing The compact but standard 11/8mm tubing size was Alphacool’s go-to here. The tubing uses anti-kink springs in order to prevent kinks in the tubing. This makes it easy to lay tubing even in tight spaces, meaning the Eisbaer LT is easy to install even in compact cases. Radiator Alphacool has integrated a brand-new 25mm-thin Ultra-Slim Radiator. Unlike most AIO systems, Alphacool’s radiator is not made of cheap aluminium, but rather high-quality copper. With twice the heat capacity, copper significantly increases the radiator’s cooling performance. This is especially noticeable when you reach the performance limits of a radiator. While temperatures in aluminium radiators progressively rise fairly early, copper radiators can keep the temperature stable for much longer. Fans The Eiswind fans were specially designed for use in radiators and provide very high static pressure to force cool air through the radiator’s cooling fins. Both fans can be regulated via PWM over an enormous range of 550 to 1700 RPM. A PWM Y-adapter is included with the Eisbaer LT, so both fans can be connected to a PWM connection on your motherboard or a separate fan controller. At first glance, the Eisbaer LT looks like a typical CPU AIO solution, but a closer look elevates the Eisbaer LT far above the competition. Thanks to its copper radiator and cooling block, its cooling power is enormous, and the quick connectors and custom water cooling components make it easy to expand on. On top of that, you have product options that can connect to the Eisbaer LT without needing to be refilled at all – such as external radiators, prefilled radiators, and graphics card coolers. The portfolio is constantly expanding. Technical Details Radiator Dual 120 mm Dimensions (LxWxH): 270 x 120 x 25 mm Material: 100% Copper Fans Eiswind 12 Bearing: Sleeve Bearing Voltage: 12V Power connector: 4-Pin PWM Rated speed (rpm): 550 -1700 (+/-10%) Fan efficiency: 63,85 cfm / 108m³/h Air pressure: 1,66 mm H2O Volume: 29 dB(A) CPU Cooler Dimensions (LxWxH): 69 x 69 x 39 mm Cooler bottom dimensions: 56 x 56 x 3 mm Cooler bottom material: Copper Threads: 3x G1/4" (Inlet, Outlet, Fillport) Pump DC-LT Ultra low noise Ceramic – 12V DC Rated speed (rpm): 2600 Voltage range: 7- 13,5V DC Power consumption: 4W Flow rate: 70L/h Maximum head: 0,85 m Power connection: 3-Pin Tubings Length: 32 cm, including anti-kink springs Diameter: 11/8 mm Material: PVC 2 quick connectors (LxW: 83 x 28 mm) pre-installed Compatibility AMD Socket AM2/AM2+/AM3/AM3+/ AM4/FM1/FM2/FM2+/C32/G34/754/939/940 Intel Socket LGA 755/1156/1155/1151/1150/1366/2011/2011-3/2066/604/771 Scope of Delivery 1x Alphacool Eisbaer LT240 CPU - black Manual Datasheet
