The Alphacool Eisbecher Aurora reservoir has an integrated pump top for powerful D5 pumps and comes with a VPP Apex pump. The tube of the reservoir is made of glass, the D5/VPP pump top and the lid of acetal. The combination of these two materials gives the expansion tank a magnificent appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the glass tube.Extensive mounting optionsMounting option 1:Stands are included in the scope of delivery, which, among other things, allow the expansion tank to be mounted on the bottom of the enclosure. Mounting option 2:Included in the scope of delivery are 120mm/140mm mounting frames, which can be used to mount the Eisbecher Aurora expansion tank as desired on free fan spaces, radiators or on the fans on radiators.Digitally addressable RGB lighting12 digitally addressable RGB LEDs illuminate the glass tube of the reservoir. They are mounted in a ring at the lower end of the tube in the transition to the pump top and provide brilliant illumination of the entire expansion tank. In combination with the Lighttower water effect, a very special ambience is achieved. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard.Lighttower water effectA special water effect is created in the Eisbecher reservoir via the riser tubes. If you do not fill the reservoir beyond the top edge of the riser tube, you get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the flow of the circuit, the effect is stronger or weaker. PumpThe VPP Apex pump does without a spherical bearing and uses a ceramic shaft. The motor's coils have been moved from the inside to the outside. These changes have the effect that the pump is fundamentally more stable and smoother running, and any vibrations that arise have been significantlyreduced. Another positive side effect is that power consumption has been almost halved as a result. Compared to Alphacool's Eispumpe, the power is not supplied via a 4-pin Molex connector. Instead, the Apex VPP pump is connected to the power supply using a SATA connector. The Apex VPP pump has a 4-pin fan connector that connects to the motherboard or to an external controller. This allows you to control the speed range of the pump via PWM and read out the RPM signal. Technical dataL x W x H142 x 77 x 77mmPump compatibilityD5Capacity180 mlMaterial Pump top & coveracetalMaterial tubeglassMaterial framing baraluminiumConnection1x G1/4“ inner thread IN / 4x G1/4“ inner thread OUTMaximum working temperature60 °CPressure tested0,8 BarQuantity of digital aRGB LEDs12Power digital aRGB LEDs5VPower connector digital aRGB LEDs3-Pin JST + 3-Pin 5VWeight567 gColorblackTechnical data VPP ApexDimensions (L x W x H)65 x 65 x 41mmMaterial pumpsynthetic materialMaterial pump coveraluminiumMaterial axleceramicsConnections4-Pin PWM | SATARotational speed2500 - 4500 RPMCable lenghts4-Pin PWM - 48cm | SATA - 48cmOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25 mMax flow340 l/hMax working temperature60 °CNet weight276 gcolorblack
Tootekood: VENTOR120ARGBPWM-BKCWWGTIN: 4711085946089Jahutid ja lisad
The XPG VENTO R 120 ARGB cooling fan is engineered with an innovative reverse design to optimize airflow intake, keeping your system running smoothly and efficiently. Illuminate your rig with mesmerizing ARGB lighting effects, adding a touch of flair to your gaming setup. Equipped with a 4-Pin PWM connector and daisy-chain capability, installation is a breeze. Plus, the Rifle Bearing ensures quiet operation and long-term durability. Experience superior cooling performance with the auto-restart mechanism for uninterrupted gameplay sessions. Seamlessly integrate with your motherboard ARGB software for customizable lighting control. Elevate your gaming setup with the XPG VENTO R 120 ARGB fan and unleash the power of performance and style.
XTM70 extreme performance thermal paste enables maximum heat transfer from your high-end processor and components so they can stay reliably cool, during even the most intense tasks and overclocking.
Hochleistungs-Kühler mit schwarzem Messingdeckel, für Intel & AMD, große Kontaktfläche ideal für Mehrkern-CPUs, digital adressierbare RGB-LED-Beleuchtung
Hochleistungs-Kühler mit verchromtem Messingdeckel, für Intel & AMD, große Kontaktfläche ideal für Mehrkern-CPUs, digital adressierbare RGB-LED-Beleuchtung
Are you tired of your unused fitting ports looking ugly due to protruding stop fittings? Have you miss-placed the original stop fittings that came with your Alphacool products? Then Alphacool has exactly the right solution for you with its patented flush stop fittings! The fitting is screwed in to the block or radiator to create a completely flat surface. This ensures an elegant look. Note: Only compatible with the Alphacool NexXxos radiators of the V.2 series and the Alphacool GPX Aurora series.
Tootekood: FAN-HYTE-FP12-BW-3GTIN: 1220000350663Jahutid ja lisad
Three 120-mm PWM fansExtremely efficient cooling with up to 3,000 RPMVery high airflow and static pressureLCP material has many benefitsUsable both in cases and on radiatorsHyte Nexus Link compatibilityHyte FP12 THICC: High-efficiency fans in a three-packWith the Hyte FP12 THICC, Hyte impresses not only with high performance but also with high-quality materials. You also get three 120-mm fans that you can use as case fans. At the same time, they are also suitable for use on radiators.Strong cooling thanks to high-end materialsWith its incredible 3,000 RPM, your components will stay at low temperatures at all times. Despite the powerful cooling, they are surprisingly quiet: Under full load, they reach just 47.3 dB(A).A high airflow of 179.76 m³/h and 8.14 mmH2O static pressure make the fans perfect for use in custom water cooling systems.Fans made from high-quality and durable materialsThe fans are made from fiberglass-reinforced LCP (Liquid Crystal Polymer) material. The liquid polymer materials provide significantly higher mechanical strength and temperature resistance compared to regular plastics. This also contributes to vibration reduction, ensuring high stability and durability.
The diamond-milled precision surface of the Intel High Performance Heatspreader V1 offers a 207% larger contact surface for CPU coolers. The nickel-plated copper cooler replaces the standard heatspreader of the CPU and the Integrated Loading Mechanism (ILM) of the mainboard and can only be used with delidded processors. Please follow all the instructions below!
The CORSAIR iCUE Link LX140-R RGB case fan combines functionality with aesthetic appeal, designed to enhance the cooling performance of any system. Featuring a fan diameter of 140 mm and equipped with a magnetic bearing, it ensures durability and quiet operation. The fan operates at a variable rotation speed ranging from 350 to 2000 rpm, allowing for optimized air flow between 13.4 and 90.6 cfm. The innovative reverse blade design provides flexible airflow options, while the dual ring lighting, powered by 18 RGB LEDs, adds visual enhancement to the build. Further enhancing experience, the fan supports Pulse-width modulation (PWM) for dynamic speed adjustments and comes equipped with a Zero RPM fan mode, ensuring silence during lighter loads. The fan also offers a comprehensive 50,000 hours mean time before failure (MTBF), making it a long-lasting component for any setup. With included iCUE Link connectors and a convenient 13.5 cm iCUE Link cable, integration into existing systems is seamless, paving the way for an efficient cooling management solution.
The Alphacool Core reservoir has an integrated pump top for powerful D5 pumps and comes with a VPP Apex pump. The tube of the reservoir is made of acrylic, the D5/VPP pump top and the lid of acetal. The combination of these two materials gives the expansion tank a discreet appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube.What's new?Compared to the previous Eisbecher models, the acrylic tube of the Core reservoir has an external thread. This provides more stability and safety when connecting the lid and pump top to the tube. Also new is the integrated digital aRGB lighting. 12 digitally addressable RGB LEDs in the pump top are included in the scope of delivery of the Core reservoir and no longer have to be purchased separately. Extensive mounting optionsMounting option 1:Stands are included in the scope of delivery, which, among other things, allow the expansion tank to be mounted on the bottom of the enclosure. Mounting option 2:Included in the scope of delivery are 120mm/140mm mounting frames, which can be used to mount the Core expansion tank as desired on free fan spaces, radiators or on the fans on radiators.Digitally addressable RGB lighting12 digitally addressable RGB LEDs illuminate the aycryl tube of the reservoir. They are mounted in a ring at the lower end of the tube in the transition to the pump top and provide brilliant illumination of the entire expansion tank. In combination with the Lighttower water effect, a very special ambience is achieved. The digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a digital RGB capable mainboard.Lighttower water effectA special water effect is created in the core reservoir via the riser tubes. If you do not fill the reservoir beyond the top edge of the riser tube, you get a kind of fountain effect. In this case, the water is pushed out the sides of the riser tube and splashed against the glass tube. Depending on the flow of the circuit, the effect is stronger or weaker. The effect can be placed at the lower or upper inlet using the riser tubes included in the delivery.Pump compatibilityThe Alphacool Core expansion tank has an integrated pump top and is compatible with all original D5 pumps as well as all Alphacool VPP pumps. The pump retaining ring, a pump O-ring and all screws are included in the scope of delivery.PumpThe VPP Apex pump does without a spherical bearing and uses a ceramic shaft. The motor's coils have been moved from the inside to the outside. These changes have the effect that the pump is fundamentally more stable and smoother running, and any vibrations that arise have been significantlyreduced. Another positive side effect is that power consumption has been almost halved as a result. Compared to Alphacool's Eispumpe, the power is not supplied via a 4-pin Molex connector. Instead, the Apex VPP pump is connected to the power supply using a SATA connector. The Apex VPP pump has a 4-pin fan connector that connects to the motherboard or to an external controller. This allows you to control the speed range of the pump via PWM and read out the RPM signal. Technical dataL x W x H251 x 76,5 x 76,5 mmPump compatibilityD5Capacity400 mlMaterial Pump top & coveracetalMaterial tubeacrylicConnection3x G1/4“ internal threadMaximum working temperature60 °CPressure tested0,8 BarQuantity of digital aRGB LEDs12Power digital aRGB LEDs5VPower connector digital aRGB LEDs3-pin JST (male & female switch)Weight621 gColorblackTechnical data VPP ApexDimensions (L x W x H)65 x 65 x 41mmMaterial pumpsynthetic materialMaterial pump coveraluminiumMaterial axleceramicsConnections4-Pin PWM | SATARotational speed2500 - 4500 RPMCable lenghts4-Pin PWM - 48cm | SATA - 48cmOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25 mMax flow340 l/hMax working temperature60 °CNet weight276 gcolorblack
Alphacool presents the Core 1, a new generation of CPU water cooling. The latest desktop processors are continuously becoming more powerful, but also produce more and more waste heat. The Core 1 reliably solves this problem with the help of its entirely new 3D-Jetplate, which is also used in industrial applications. The all-metal CPU water cooler not only impresses with its elegant appearance, but also features a new mounting system that simplifies installation.The best of new and oldAlphacool brings the best of both worlds together with the Core 1. In addition to the new 3D-Jetplate, Alphacool returns to its roots by using a proven cross-slot technique to distribute coolant evenly across the redesigned cooler base. Inside the cooler, O-rings ensure precise water flow for effective cooling. The Core 1's housing is machined from a high-quality brass block and features nickel-plated connectors. The cooler's copper base, also nickel-plated, has been enlarged to ensure full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a key element of Alphacool's Core series. The nickel-plated connectors and the discreet contour line stand out from the high-quality brass housing. The rounded corners add the perfect touch to the overall look. The Core 1 is available in various color designs, as well as in discreetly illuminated aRGB Aurora models. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 / LGA 1851 Technical dataDimensions (L x W x H)72 x 72 x 26,50mmMaterial coolernickel plated copperMaterial cooler topBrassMaterial threadsnickel plated BrassThreads2 x G1/4“Fin thickness0,4mmFin distance0,4mmPressure tested0,8 barMax working temperature60°CWeight540gColorblackWarranty: 5 years???? Warranty Terms
With the Core 1 LT, Alphacool presents the light version of the proven Core 1 CPU water cooler. Housed in a polymer casing, the Core 1 LT also uses the reliable combination of 3D jetplate and cross slot-technology. This enables it to effectively dissipate the enormous waste heat of the latest desktop processors. With its elegant design, it integrates seamlessly into any water cooling system. The new mounting system is also included and simplifies installation with Intel and AMD processors.The best of new and oldAlphacool combines the best of both worlds with the Core 1 water cooler series. In addition to the new 3D jetplate, Alphacool returns to its roots by distributing the coolant evenly across the redesigned cooler base using proven cross-slot technology. Inside the cooler, O-rings ensure a precise water flow and thus guarantee effective cooling. The nickel-plated copper base of the cooler has been enlarged to achieve full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a central element of the Core series from Alphacool. Its focus is on cooling performance at a fair price. The rounded corners add the perfect touch to the overall look. The Core 1 LT is available in both non-illuminated and transparent aRGB versions. Technical dataDimensions (L x W x H)71.80 x 71.80 x 28.05mmMaterial coolernickel plated copperMaterial cooler topacrylicMaterial threadsacrylicThreads2 x G1/4“Fin thickness0.4mmFin distance0.4mmPressure tested0.8 barMax working temperature60°CWeight250gColortransparent/blackWarranty: 5 years???? Warranty Terms
Full-Cover-Waterblock von EK Water Blocks, für ROG Strix und ASUS TUF RTX 3090 Ti, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung
Tootekood: TG-MP-A-100-100-15-2GTIN: 4260711991387Jahutid ja lisad
The Thermal Grizzly Minus Pad Advance is a high-performance thermal pad designed for optimal heat dissipation. Measuring 100 x 100 x 1.5 mm, this pad is perfect for a variety of cooling applications. Each package contains two pieces, ensuring you have the necessary components for effective thermal management. With a net weight of 0.108 kg, these pads are lightweight and easy to apply.
Alphacool presents its new graphics card water coolers for the latest Nvidia GeForce RTX generation. They are part of the Core product series and combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers offer outstanding cooling performance. At the center of the cooler is the one-piece milled copper cooler, complemented by a precision-machined brass terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother, brighter surface than conventional nickel plating. The visual design of the GPU water cooler has been changed only slightly. A special highlight is the newly added Core emblem above the jet plate, which underscores its affiliation with the Core series and visually enhances the design. The series continues to rely on high-quality brass fittings, guaranteeing optimal quality and safety. The specially adapted aluminum backplate covers the entire rear of the copper cooler and ensures a clean and uniform appearance. The acrylic, in combination with the aRGB lighting, enables even and impressive illumination of the entire cooler. Technically, the GPU water cooler has been completely redesigned. To optimize cooling performance, the gaps between the cooler and the PCB components were redefined and tested. The water flow was simulated using state-of-the-art software and verified in practical tests. These extensive tests enabled improvements to the cooler base and nozzle to ensure the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - MSI GeForce RTX™ 5090 32G GAMING TRIO OC - MSI GeForce RTX™ 5090 32G SUPRIM LIQUID SOC (MS-V530 Ver:2.1) - MSI GeForce RTX™ 5090 32G SUPRIM SOC (MS-V530 Ver:2.1) - MSI GeForce RTX™ 5090 32G Vanguard SOC - MSI GeForce RTX™ 5090 32G Vanguard SOC Launch Edition Technical data cooler Complete dimensions (L x W x H): 222.40 x 160.81 x 34.12mm Radiator base material: chrome-plated copper Material radiator top: Acrylic Material Terminal: nylon Material connection thread: Brass Maximum working temperature: 60°C Pressure tested: 0.8 bar Connections: 4 x G1/4" Thickness of radiator base: 3.25mm Thick cooling fins: 0.4mm Distance between cooling fins: 0.4mm lighting: digital aRGB LEDs Power connection digital aRGB LEDs: 3-pin JST Voltage digital aRGB LEDs: 5V Number of digital aRGB LEDs: 10 Color: transparent Technical data backplate Dimensions (L x W x H): 222.40 x 132.24 x 6mm Thick backplate without spacers: 3mm material: aluminum Warranty: 3 years
Kompakter 120 mm Radiator für Wasserkühlungen, aus Kupfer, hohe Finnendichte, für besonders kleine Custom-Loops, für Hardware aus dem Einsteigersegment
