The travel plug from Brennenstuhl in the color black for the outlet is ideal for traveling and for holidays and impresses with its quality and safety in all areas. It also convinces by the following features: With earthing contact plug system in countries with British plug-in system With 13 A fuse Max. Load: 13 A / 250 V Plug adapter is not a voltage and frequency converter Height: 7.00 cm Length: 4.50 cm Weight: 0.065 kg Width: 5.00 cm
EK-Quantum Magnitude Accent - Red is an interchangeable inner aesthetic frame for EK's new Magnitude water block. This red accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation. This Magnitude accent is made of anodized aluminum. Available in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude CPU water blocks Made in Europe - Slovenia!
Optimised for Static Pressure During the development of the new P14 PWM, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM is particularly suitable for use on heatsinks and radiators. More Efficient Technology The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. Maximum Quietness, Minimum Vibration Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years. 200 to 1700 RPM regulated via PWM Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed. High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data: Performance Fan Speed: 200 - 1700 rpm Airflow: 72.8 CFM/ 123.76 m³/h Static Pressure: 2,40 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: PWM Connector: 4-Pin Connector Fan Bearing: Fluid Dynamic Bearing Electric Characteristics Typical Voltage: 12 V DC Starting Voltage: 3.9 V Current: 0.12 A Cable Lenght: 400 mm Size & Weight Lenght: 140 mm Width: 140 mm Height: 27 mm Weight: 194 g
The ICEBERG THERMAL DRIFTIce Thermal Pad by Iceberg Thermal is designed to efficiently dissipate heat and enhance the performance of your electronic devices. Measuring 40mm by 80mm with a thickness of 1.0mm, this thermal pad is perfect for a variety of applications. It is lightweight, with a gross weight of only 0.020 kg, making it easy to handle and install. Ensure your devices remain cool and functional with this high-quality thermal pad.
The ICEBERG THERMAL DRIFTIce Thermal Pad by Iceberg Thermal is an effective solution for heat management in electronic devices. Measuring 40mm by 120mm with a thickness of 1.5mm, this thermal pad provides optimal thermal conductivity to improve device performance. It is lightweight, with a gross weight of only 0.035 kg, making it easy to handle and install. Ideal for a variety of applications, this thermal pad ensures efficient heat dissipation, protecting components from overheating.
The Lian Li O11D Mini Front MK2 is made of high-quality and transparent acrylic glass, consists of a large chamber and 5 channels. As befits a distro plate, it allows all radiators, as well as GPU and CPU to be connected to each other in the circuit. For this purpose, 12 ports (incl. fill port & drain port) are available. The MK2 replaces the original front panel. The screw points provided by Lian Li can be used for fixing. For compatibility of the Distro Plate with radiators, please note that only (!) "EKWB SE360 (2x)" & "EKWB SE240 (1x)" can be used. In addition to the screw set for fixing the Distro Plate to the housing, the scope of delivery includes a specially developed D5 adapter (WITHOUT PUMP!). The adapter is compatible with every common D5 pump and is decoupled from the Distro Plate. The vibrations of the pump have been reduced to a minimum by means of rubber-mounted sealing rings, which results in less noise pollution. Features at a glance Smallest distro plate in the Lian Li range Unique plug-in system for easy installation in the case Adapter enables perfect fit of a D5 pump Compatible with EK-CoolStream SE360 2x and 1x SE240mm Technical details Material: high-quality acrylic glass, plastic Manufacturing: CNC machining of the acrylic, assembly by hand Dimensions: without pump (W x H x D): 487 x 211 x 21 mm with pump (W x H x D): 487 x 211 x 90 mm Colour: transparent Connections: 12x G1/4 inch connections Capacity: 435 ml Compatibility: 3x360mm fan space Scope of delivery Lian Li Mini MK2 4x M3 glands
Whether used as a replacement or to modify the tube, the Protium reservoir can be used with all Protium items. Technical Data Length: 100 mm Outer diameter: 60 mm Material: Acrylic Compatibility Protium D5 pump attachment Protium D5/Reservoir Combo Protium reservoir
Der Arctic Freezer A35 RGB kombiniert Leistung und ein Modernes Design. Die Optimierte Leistung, schwarzes Design und flüsterleiser Betrieb heben den Freezer A35 RGB hervor und bieten ein besseres Erlebnis. Der Freezer A35 RGB wird mit einer 0,8 g Spritze der neuen MX-5 ausgeliefert. ARCTICs Ultimate Performance Wärmeleitpaste ermöglicht aufgrund ihrer geringen Viskosität und Partikelgröße eine besonders dünne Schichtdicke und verringert den Wärmestau zwischen Heatspreader der CPU und Kühler erheblich. Durch sein kompaktes Design ermöglicht er im installierten Zustand uneingeschränkte RAM-Kompatibilität.Der Freezer A35 RGB ist eine sockelspezifische Installationsvariante für AMDs Sockel AM4. Der Freezer A35 RGB verfügt über 12 analoge RGB LEDs, welcher direkt über einen 12 V 4-Piun RGB-Header des Mainboards angeschlossen werden kann. Alternativ kann der Kühler aber auch über einen externen Controller illuminiert und mit der Beleuchtung anderer Hardware synchronisiert werden. Technische Daten: Maße: 124 x 157 x 103 mm (B x H x T) Material: Kupfer (Boden, Heatpipes), Aluminium (Lamellen) Gewicht: ca. 764 g Farbe: Schwarz, Rot Heatpipes: 4x Ø 6 mm Empfohlen für TDP bis: 210 W Lüfter: 2x 120 mm (Max. 0,5 Sone, 200 - 2.100 U/Min) Anschluss: 4-Pin PWM Stromstärke: 0,13 A Spannung: 12 V Kompatibilität: Intel: 1151, 1150, 1155, 1156, 2066, 2011-V3 AMD: AM4
AMD Tower CPU Cooler for Continuous Operation. 200 - 1800 rpm Lüfterlager: Double Ball Bearing Geräuschpegel: 0.35 Sone Stromstärke: 0.12 A Anschluss: 4-Pin Größe & Gewicht Tiefe: 91 mm Breite: 133 mm Höhe: 158.5 mm Gewicht:734 g
Optimierte Leistung trifft modernes, schwarzes Design und flüsterleisen Betrieb. Der Single-Tower CPU-Kühler ermöglicht mit seinen vier versetzen Heatpipes eine schnelle Wärmeübertragung in den Kühlkörper, wo diese mittels eines 120 mm Lüfter effizient abgeführt werden kann. ULTIMATE PERFORMANCE WÄRMELEITPASTE Der Freezer i35 wird mit einer 0,8 g Spritze der neuen MX-5 ausgeliefert. ARCTICs Ultimate Performance Wärmeleitpaste ermöglicht aufgrund ihrer geringen Viskosität und Partikelgröße eine besonders dünne Schichtdicke und verringert den Wärmestau zwischen Heatspreader der CPU und Kühler erheblich. FÜR KÜHLKÖRPER OPTIMIERTER LÜFTER Der beim Freezer i35 verbaute Lüfter, profitiert von allen Vorzügen der P-Lüfter. Diese vereinen, mit ihrem vibrationsarmen, stromsparenden Motor und dem hydrodynamischen Gleitlager, einen leisen, sowie effizienten Betrieb. Trotz hoher Finnendichte garantiert der Lüfter mit seinem fokussierten Luftstrom einen hohen statischen Druck und ist damit ideal für den Einsatz auf Radiatoren und Kühlkörpern geeignet. Die Drehzahl des Lüfters lässt sich dynamisch über PWM steuern und kann somit optimal an jedes Szenario angepasst werden. Technische Daten: Intel Sockel: 1700, 1200, 115X Heatpipes: 4 Finnenmaterial: Aluminium Finnenanzahl: 54 Finnendicke: 0,4 mm Wärmeleitpaste: MX-5 (0.8g) Lüftergröße: 120 Geschwindigkeit: 200 - 1800 rpm Lüfterlager: Fluid Dynamic Bearing Geräuschpegel: 0.35 Sone Stromstärke: 0.12 A Anschluss: 4-Pin Tiefe: 91 mm Breite: 133 mm Höhe: 158.5 mm Gewicht: 734 g
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: 90° Socket 13/10mm This connector has a ¼” thread on one side and is thereby compatible with 95% of components. The other side fits a 13/10mm hose. The middle of this connector is turned at a 90° angle in order to prevent complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications: Material: Brass Colour: Chrome Dimensions: Length: 34.5mm Width: 20mm Height: 33mm Scope of Delivery: 1x Alphacool Eiszapfen 13/10mm compression fitting 90° rotatable G1/4 - chrome
Hard Tube Fitting von EK Water Blocks, für Röhren mit 12 mm AD, Kompatibel zu Röhren aus Acryl / PETG / Kupfer / Messing / Edelstahl, mit optionalen Ringen farblich individualisierbar
Tootekood: ZM-AF120 ARGB BLACKGTIN: 823884203929Jahutid ja lisad
Fan ZM-AF 120 ARGB black This fan is characterized by compact dimensions of 120 x 120 x 26 mm, which allows for easy installation in most computer cases. Its speed can reach up to 2000 revolutions per minute, ensuring effective cooling of components even during intensive use of the computer. Additionally, the Fan ZM-AF 120 ARGB has the ability to adjust the rotational speed, which allows you to adjust the cooling to individual needs. One of the greatest advantages of this product is the ARGB backlight, which not only gives the computer a modern look, but also allows you to create a unique design tailored to your preferences. Thanks to the use of active air cooling, the Fan ZM-AF 120 ARGB effectively dissipates heat, preventing overheating of components and extending their life. This fan is equipped with a 4-pin connector, which guarantees a stable connection to the computer's motherboard. Despite its efficiency, the ZM-AF 120 ARGB Fan is characterized by a low noise level of only 29.7 dB, which makes the computer's operation quiet and comfortable. The set includes all the necessary accessories for installing the fan, which makes the assembly process simple and quick. Additionally, the low weight of the product (160 g) does not burden the computer's structure, which is especially important when building efficient configurations.
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: 45° Angle Adapter This adapter has a rotatable ¼” external screw thread on one side and a ¼” internal thread on the other side. This 45° angle connector is mostly useful in cases where ¼” threads are too close to one another and larger hose connections do not fit next to each other. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Length: 35mm Diameter: 18,5mm Scope of Delivery: 1x Alphacool Eiszapfen angled adaptor 45° rotatable G1/4 outer thread to G1/4 inner thread - deep black Fitting Map You can find an interactive map of all alphacool fittings here.
