AiO-Wasserkühlung im 240-mm-Format von Alphacool, mit ARGB-Lüftern, variable Pumpleistung, mit Schnellverschlüssen zur einfachen Aufrüstung, kompatibel zu aktuellen AMD & Intel Sockeln
A combination product that both reduces noise and improves cooling performance.Phobya has again brought an innovation to the market which is so unique. Both water coolers and air coolers can improve the complete performance of their computer with this product. "Fear it!" -> heat and volume!Cooling Performance:The Shroud increases the cooling performance of your fan / radiator combination. Mounted between fan and radiator, the air can distribute in the pre-chamber and thus better flow through the complete cooling surface of the radiator. With a fan mounted directly on the radiator, the fan motor creates a dead spot behind which the radiator surface remains unused and cannot contribute to cooling. Several shrouds with longer screws can also be connected in series, which once again improves the efficiency of the fan. Due to the chosen material, a greater tightness between the radiator and the fan is achieved which in turn directs the airflow better to its actual destination.Loudness:The material, a hard rubber with a thickness of 7mm, the fan and housing are separated from each other. The vibration-free suspension is a must, especially for fast-moving fans, because the natural vibration of the fans like to set parts of the case in motion, which can become very loud in the long run. Likewise, a rattling of the fans on the mounted component is prevented.Technical details:Material: hard rubberColor: blackDesign: for 120mm fansWall thickness: 7mmhole size: 5mmScope of delivery:1x Phobya Shroud & Decoupling 120mm (7mm thick).
The Alphacool Core metal backplate for XPX, XPX Aurora, XPX Aurora Edge, XPX 1U, XPX Pro 1U, XPX Pro Aurora, Eisbaer, Eisbaer Aurora, Eisbaer Pro, Eisbaer LT is compatible with Intel's LGA 115X, 1200 and 1700 sockets. This includes solo water coolers and CPU AIOs. The backplate is made of stainless steel and is covered with an insulating polymer layer on the back. The material composition of the backplate ensures that the CPU cooler is additionally stabilised and can be mounted on the socket with improved contact pressure. All in all, this leads to a considerable improvement in cooling performance compared to the previously used plastic backplates. This effect is most clearly measurable with Intel's socket LGA 1700. There is an additional adhesive surface on the back of the backplate that serves as an installation aid and thus makes mounting much easier. Compatibility: Intel: LGA 1150 / 1151 / 1155 / 1200 / 1700 Technical data L x W x H 90 x 90 x 3 mm Material stainless steel Weight 149 g Color black
EK-Loop Connect Level Sensor TBE 60 is a coolant level sensor provides a warning when the reservoir reaches a point where it would be prudent to top it off. Due to the coolant evaporation through the tubing, it makes sure the pump never runs dry. Also, in case of a leak, it warns you of the coolant level being below its optimal value. It attaches to the tube of the EK tubular-style reservoirs with 60mm diameter and connects via a dedicated cable to the EK-Loop Connect control unit. Technical Specifications: Connectors: 4-pin Length: 50cm
Silber vernickeltes Compression Fitting von EK Water Blocks, für Röhren mit 16 mm OD, Kompatibel zu Röhren aus Acryl / PETG / Kupfer / Messing / Edelstahl, 6er Pack
Hard Tube Fitting von EK Water Blocks, für Röhren mit 14 mm AD, Kompatibel zu Röhren aus Acryl / PETG / Kupfer / Messing / Edelstahl, mit optionalen Ringen farblich individualisierbar, 6er-Pack
Every water cooling system requires either soft or hard tubing to connect the individual components such as radiators, waterblocks and reservoirs. PVC is usually used for soft tubing it has many fantastic properties that make it easy to work with and it is cheap. However, Alphacool is now bringing a new material from the Alphacool Enterprise Solutions series across to the everyday user. This tubing is called Alphacool AlphaTube TPV and is the choice of tubing for industries. What is the advantage of TPV? Compared to PVC hoses, the AlphaTube TPV hoses offer various advantages for water cooling. It is much more resistant to acids and alkalis. It is also much more temperature resistant than PVC tubing. The Alphacool AlphaTube TPV can withstand temperatures up to 155°C. While PVC hoses begin to warp at higher water temperatures. This means areas with tighter bends will warp but the TPV hose remains stable in its shape. This eliminates the risk of kinks in tubing and the restriction of flow. How is AlphaTube TPV installed? The Alphacool AlphaTube TPV hose is as easy and simple to install as any other PVC hose. It is slightly stiffer, but only very slightly. Handling the TPV hose is just as simple as any other soft tubing. What is special about a tpv hose? The Alphacool AlphaTube TPV is characterised by its high resistance to acids, bases and external influences. In addition, the hose has an extraordinary longevity that far surpasses that of PVC hoses. The matt black hose also offers a discreet velvet look. An eye-catcher in every water-cooled PC. Technical data: Material: Thermoplastic vulcanizates, EPDM/PP Length: 3,3 m Colour: Matt black Operating temperature: -50 to + 155°C Hardness: 35 Shore-A to 50 Shore-D Size: 16/10 mm Download data sheet PDF: Alphacool tube AlphaTube TPV 16/10 - Black Matte 3,3m (10ft) Retailbox 330cm
With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2000 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2000 rpm, it provides an air flow of 92.3 CFM, together with a high static pressure of 2.53mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 315 x 140 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 20 Fan size 140mm Fan slots 2 one-sided / 4 double-sided Color black Technical data fans L x W x H 140 x 140 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.26 (Max. 0.3) A Rated Power 3.12 (Max. 3.6) W Rated Speed 0 - 2000rpm/min (±10%) Max. Air Flow 92.3CFM Max.Static Pressure 2.53mm-H2O Noise level (rated voltage, mute room, distance 1m) 34.3 (Max. 36) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm
MASTERLIQUID ATMOS Cooler Master is unveiling the next generation of liquid cooling engineering with the MasterLiquid Atmos, our new AIO liquid cooler. 360 Degrees of CoolThe next generation AIO liquid cooling is here with the MasterLiquid 360 Atmos White. The Atmos is our forward-thinking, innovative take on what an AIO cooler can and should be. Exceptionally silent performance provided by our SickleFlow Edge fans. An optimized user experience from unboxing to the MasterCTRL software. A pump top cover fully customizable with your own 3D-printed creations. Eco-friendly construction implemented throughout. Our signature dual chamber pump design, refined. The Atmos represents the best of the best in modern AIO liquid cooling, a full 360 degrees of cool. FULLY CUSTOMIZABLECustomize the pump top cover with your 3D designs and take full control of the ARGB Gen 2 lighting. The Atmos provides unprecented creative freedom. LATEST SICKLEFLOW EDGE 120 FANSOur in-house desPre-installed SickleFlow Edge 120mm fans further improve cooling performance and simplify user installation.igned and manufactured premium fan comes with enhanced blades for next-level airflow and cooling performance.
This iCUE LINK 200 mm Cable is perfect for crafting seamless, angled connections. With its 90-degree slim angled design, this medium-length cable guarantees an impeccably neat and sleek result for your connectivity needs.
The SilverStone Nitrogon is a low-profile CPU cooler designed specifically for Intel LGA 1700 sockets, featuring a compact and versatile top-down design. With a minimal height of just 45mm, it is perfect for slim and small form factor systems. The cooler includes a 92mm fan for efficient cooling performance. Its dimensions are 10.5cm in width, 9.7cm in height, and 10.6cm in length, and it weighs 290 grams. For more details, visit the SilverStone website.
