The Alphacool Core metal backplate for XPX, XPX Aurora, XPX Aurora Edge, XPX 1U, XPX Pro 1U, XPX Pro Aurora, Eisbaer, Eisbaer Aurora, Eisbaer Pro, Eisbaer LT is compatible with Intel's LGA 115X, 1200 and 1700 sockets. This includes solo water coolers and CPU AIOs. The backplate is made of stainless steel and is covered with an insulating polymer layer on the back. The material composition of the backplate ensures that the CPU cooler is additionally stabilised and can be mounted on the socket with improved contact pressure. All in all, this leads to a considerable improvement in cooling performance compared to the previously used plastic backplates. This effect is most clearly measurable with Intel's socket LGA 1700. There is an additional adhesive surface on the back of the backplate that serves as an installation aid and thus makes mounting much easier. Compatibility: Intel: LGA 1150 / 1151 / 1155 / 1200 / 1700 Technical data L x W x H 90 x 90 x 3 mm Material stainless steel Weight 149 g Color black
EK-Loop Connect Level Sensor TBE 60 is a coolant level sensor provides a warning when the reservoir reaches a point where it would be prudent to top it off. Due to the coolant evaporation through the tubing, it makes sure the pump never runs dry. Also, in case of a leak, it warns you of the coolant level being below its optimal value. It attaches to the tube of the EK tubular-style reservoirs with 60mm diameter and connects via a dedicated cable to the EK-Loop Connect control unit. Technical Specifications: Connectors: 4-pin Length: 50cm
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 90° 20/40cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
Silber vernickeltes Compression Fitting von EK Water Blocks, für Röhren mit 16 mm OD, Kompatibel zu Röhren aus Acryl / PETG / Kupfer / Messing / Edelstahl, 6er Pack
Hard Tube Fitting von EK Water Blocks, für Röhren mit 14 mm AD, Kompatibel zu Röhren aus Acryl / PETG / Kupfer / Messing / Edelstahl, mit optionalen Ringen farblich individualisierbar, 6er-Pack
Every water cooling system requires either soft or hard tubing to connect the individual components such as radiators, waterblocks and reservoirs. PVC is usually used for soft tubing it has many fantastic properties that make it easy to work with and it is cheap. However, Alphacool is now bringing a new material from the Alphacool Enterprise Solutions series across to the everyday user. This tubing is called Alphacool AlphaTube TPV and is the choice of tubing for industries. What is the advantage of TPV? Compared to PVC hoses, the AlphaTube TPV hoses offer various advantages for water cooling. It is much more resistant to acids and alkalis. It is also much more temperature resistant than PVC tubing. The Alphacool AlphaTube TPV can withstand temperatures up to 155°C. While PVC hoses begin to warp at higher water temperatures. This means areas with tighter bends will warp but the TPV hose remains stable in its shape. This eliminates the risk of kinks in tubing and the restriction of flow. How is AlphaTube TPV installed? The Alphacool AlphaTube TPV hose is as easy and simple to install as any other PVC hose. It is slightly stiffer, but only very slightly. Handling the TPV hose is just as simple as any other soft tubing. What is special about a tpv hose? The Alphacool AlphaTube TPV is characterised by its high resistance to acids, bases and external influences. In addition, the hose has an extraordinary longevity that far surpasses that of PVC hoses. The matt black hose also offers a discreet velvet look. An eye-catcher in every water-cooled PC. Technical data: Material: Thermoplastic vulcanizates, EPDM/PP Length: 3,3 m Colour: Matt black Operating temperature: -50 to + 155°C Hardness: 35 Shore-A to 50 Shore-D Size: 16/10 mm Download data sheet PDF: Alphacool tube AlphaTube TPV 16/10 - Black Matte 3,3m (10ft) Retailbox 330cm
With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2000 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2000 rpm, it provides an air flow of 92.3 CFM, together with a high static pressure of 2.53mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 315 x 140 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 20 Fan size 140mm Fan slots 2 one-sided / 4 double-sided Color black Technical data fans L x W x H 140 x 140 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.26 (Max. 0.3) A Rated Power 3.12 (Max. 3.6) W Rated Speed 0 - 2000rpm/min (±10%) Max. Air Flow 92.3CFM Max.Static Pressure 2.53mm-H2O Noise level (rated voltage, mute room, distance 1m) 34.3 (Max. 36) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm
All-in-One-Wasserkühlung, 360 mm Radiator, 3x 120-mm-PWM-Lüfter optimiert für Radiatorbetrieb, integrierte RGB-Beleuchtung und optimierte Schlauchanschlüsse
This iCUE LINK 200 mm Cable is perfect for crafting seamless, angled connections. With its 90-degree slim angled design, this medium-length cable guarantees an impeccably neat and sleek result for your connectivity needs.
The SilverStone Nitrogon is a low-profile CPU cooler designed specifically for Intel LGA 1700 sockets, featuring a compact and versatile top-down design. With a minimal height of just 45mm, it is perfect for slim and small form factor systems. The cooler includes a 92mm fan for efficient cooling performance. Its dimensions are 10.5cm in width, 9.7cm in height, and 10.6cm in length, and it weighs 290 grams. For more details, visit the SilverStone website.
With the Alphacool Eiszapfen you connect your hardtubes at the perfect 90° angle. The hardtube is tightly screwed to the union nut, seals immediately and can be easily loosened with one hand. Technical Details Width: 38mm Length: 38 mm Material: brass Color: Deep Black
The Alphacool ES quick-release connector is optimized for use in server and gaming systems. It is characterized by its precise manufacturing quality, excellent water flow, and a secure click mechanism for locking. Maximum flow in your system Other quick-release connectors can negatively affect water flow. Therefore, the quick coupling has been fundamentally revised to ensure water flow is barely disturbed, with a particular emphasis on minimal manufacturing tolerances. Quick and easy to connect Alphacool's ES quick-release connectors simplify the setup of server and workstation systems. Thanks to the comfortable operation, complex systems can be quickly and easily connected. To open the quick-release, the outer ring is pulled back. The seal closes immediately, preventing the coolant from leaking. To lock the quick-release connectors, it is enough to push them together. A click sound confirms the secure locking. Important: A quick-release connector always consists of two connections. Therefore, you always need the matching counterpart to get a complete quick-release. With this product, you only get half of the quick-release. Important: Note: To avoid damaging the O-ring, the quick-release should not be opened or closed in a dry state. Technical Details Color: Black, Silver Weight: 90 g Material: Nickel-plated brass, plastic Connections: G1/4 inch (AG)
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Rotatable L-ConnectorThis 90° angle adapter has a rotatable ¼” external screw thread on one side and a ¼” internal thread on the other side. This connector is mostly useful in cases where there is little space available and a special solution is needed. Technical Specifications: Material: Brass Colour:Chrome Dimensions: Length: 32mm Width: 18mm Hight: 18mm Scope of Delivery: 1x Alphacool Eiszapfen L-connector rotatable G1/4 outer thread to G1/4 inner thread - chrome