With the Reverse Blade UNI FAN CL Wireless, you can perfectly showcase your RGB front display. The fan blades are reversed so that you can enjoy the full RGB experience in pull configurations or when mounted in view—maintaining Lian Li's renowned high quality. Reverse blade orientation: RGB directly on the visible side Dual-zone RGB: control of both center and frame Push-to-connect: for easy, clean installation 122.87 m³/h airflow & 2.38 mmH₂O static pressure FDB bearing: reliable, quiet operation 30.8 dB(A) at up to 2,150 RPM Note: A Lian Li L-Wireless Controller is required for this fan. The controller is not included. Lian Li UNI FAN CL Wireless Reverse Fan: Reverse fan for front mounting The key feature of the UNI FAN CL in the reverse version: the RGB zones are visible, even when the fan draws air into your case. Ideal for builds with glass sides or reversed orientation. Wireless & cleverly connected Thanks to push-to-connect, installation takes just seconds. The connection to the system is wireless via the controller, giving you maximum flexibility and keeping your PC looking tidy. PWM fan with cooling performance and low noise With high-quality FDB bearings and a balanced combination of low noise and strong airflow, the UNI FAN CL Reverse Blade provides powerful cooling with minimal noise. With 122.87 m³/h airflow, 2.38 mmH₂O pressure, and only 30.8 dB(A) noise level, the CL Wireless Reverse fan is both quiet and powerful—perfect for demanding builds in your setup.
120-mm PWM fan with aluminum framePractical wireless connection for fewer visible cables40 digitally addressable RGB LEDsSpeed and lighting controllable via Lian Li L-Connect 3 softwareWhisper-quiet cooling with max. 2,600 RPM at 33 dB(A)153.08 m³/h max. airflow and max. 3.97 mmH2O static pressureRubber pads to decouple disturbing vibrationsNote: This fan requires a Lian Li L-Wireless controller, sold separately.Wireless ARGB Fans for Clean Cable ManagementThe UNI FAN TL Wireless from Lian Li offers an efficient solution for cable management in your PC. With its wireless 2.4 GHz control for lighting effects and fan speed, you need significantly fewer cables, simplifying your system build. The fan offers dual-zone lighting effects and is versatile.UNI FAN TL Wireless: Easy Installation and Full ControlThe UNI FAN TL Wireless is easily installed and controlled thanks to the L-Wireless controller. Through the wireless connection, you control both RGB lighting and fan speed directly through your motherboard, without the need for extra cables.Performance with Low NoiseThanks to the Fluid Dynamic Bearing (FDB) technology, the Lian Li UNI FAN TL Wireless runs quietly and efficiently, even at high speeds of up to 2,600 RPM. This provides powerful cooling and an aesthetically pleasing solution for your PC, making traditional fans fade into the background compared to UNI FAN TL Wireless!
The Lian Li UNI FAN TL LED Wireless fans impress with their elegant look and enhance your setup visually. The plug-in system, in particular, ensures a tidy build. Your hardware is kept at cool temperatures—even under heavy load. 140 mm PWM fan with reverse blades Less cable clutter thanks to a practical plug-in system and daisy-chain capability Full control over the fans with the L-Connect 3 software Infinity mirror and LED strips on the side provide an elegant look High airflow in m³/h and static pressure with max. mmH2O Lian Li UNI FAN TL LED Wireless: Stylishly Designed Fans The Lian Li UNI FAN TL LED Wireless is a 140 mm fan with reverse-oriented blades in black. Thanks to its high cooling performance, this PC fan is also suitable for high-end systems. Reverse blade fans are specially designed to reverse the airflow—ideal for use as intake fans. Unlike standard fans, they display their front side, the visually appealing side. This keeps your build looking clean—with no visible backs or unsightly stickers. 140 mm fan with impressive cooling performance A high airflow of up to 172.6 m³/h and a static pressure of up to 2.27 mmH2O, combined with up to 1,800 RPM, provide effective cooling for your gaming hardware. The increased build height of 28 mm further promotes cool temperatures. At no more than 29 dB(A), the fan is barely audible even at full load despite its high cooling performance. Smart plug-in system and daisy-chaining Thanks to the practical plug-in system, individual fans can easily be connected together. You'll need fewer cables for installation, making your build look significantly cleaner. The Lian Li wireless controller, which can be connected to the motherboard and linked with the fans, reduces cable clutter even further. Please note that the wireless controller must be purchased separately. In addition, you can combine the LCD variant with the fans of the LED variant, as long as you do not connect more than four fans to one controller. The plug-in system is not only practical, but also enables seamless transitions between fans. This particularly benefits the LED strips on the edges—once connected, stylish RGB effects can be set. The infinity mirror also gives the fan an attractive look.
The Lian Li UNI FAN TL LED Wireless fans impress with their elegant look and enhance your setup visually. The plug-in system in particular ensures a tidy build. Your hardware is kept at cool temperatures—even under heavy load. 140 mm PWM fan with reverse blades Less cable clutter thanks to a practical plug-in system and daisy-chain Full control of the fan with the L-Connect 3 software Infinity mirror and LED strips on the sides provide an elegant look High airflow in m³/h and static pressure with max. mmH2O Lian Li UNI FAN TL LED Wireless: Fans with stylish design The Lian Li UNI FAN TL LED Wireless is a 140 mm fan with reversed fan blades in black. Thanks to its high cooling performance, this PC fan is also suitable for high-end systems. Reverse blade fans are specially designed to reverse the airflow—ideal for use as intake. Unlike regular fans, they show their front side, the visually appealing side. This keeps your build looking clean—no visible rear sides or unsightly stickers. 140 mm fan with impressive cooling performance A high airflow of up to 172.6 m³/h and a static pressure of up to 2.27 mmH2O, together with speeds of up to 1,800 RPM, ensure effective cooling for your gaming hardware. The increased height of 28 mm further promotes cool temperatures. Despite the high cooling performance, the fan is barely audible under full load, at no more than 29 dB(A). Smart plug-in system and daisy-chaining Thanks to the practical plug-in system, individual fans can be easily connected together. You need fewer cables for connection, making your build look much cleaner. The Lian Li Wireless Controller, which can be connected to the motherboard and the fans, further reduces cable clutter. Please note that the wireless controller must be purchased separately. In addition, you can combine the LCD version with the LED version fans, as long as you do not connect more than four fans to one controller. The plug-in system is not only practical, but also enables a seamless transition between fans. This especially benefits the LED strips on the edges—when connected together, you can set stylish RGB effects. The infinity mirror also gives the fan an attractive look.
Worldwide the non-plus ultra in fan constructionPatented high-tech developed in Germany! With its own developed and patented (((Noiseblocker)))® technology, (((Noiseblocker)))® introduced a new era in fan construction in the year 2008.The Multiframe S series made by (((Noiseblocker)))®, which is generally recognised as the reference standard, is the first fan with a vibration-free fan frame and incorporates numerous other improvements, so that it is superior to standard fans in almost all aspects.In conjunction with the unique (((Noiseblocker)))® technology, our almost noise-free NB-NanoSLI® bearing and the NB-EKAPlus II drive, the NB-Multiframe® S series currently represents the best that German engineering expertise has to offer. Quality you can rely on! Detailed information:- A unique, multipart vibration-free chassis with integrated structure-borne sound absorbers and glass fibre-reinforced frame.- Extremely low start voltage!- Easy assembly.- NB-EKAPlus II wide-range drive with low impulse noise.- Verified technical data.Stated volume confirmed by the German Technical Inspection Agency (TÜV)!Highest Levels of Reliability:- Reverse pole and overload protection, restart function, extremely failsafe, 6-year guarantee.- Almost noise-free bearings.- xtremely low-noise and long-life NB-NanoSLI® bearings.Highest Quality- Extremely precise manufacturing, weighted frame with Deepsound Design.- Scope of delivery includes assembly material and additional sealing/ decoupling frame.- 6-year guarantee.SobilikArvuti korpusTüüpVentilaatorMüratase (suur kiirus)6 dBToote värvMust, HallVõimsustarve (tüüpiline)0,36 WKasutamistemperatuur (T-T)-10 - 70 °CHoiustamistemperatuur (T-T)-30 - 80 °CKaal75 gMõõdud (l x s x k)80 x 80 x 25 mmPöörlemiskiirus1200 RPMToote tööiga180000 h
Quiet, reliable and affordable. Since 2005 this has been one of our best-selling fans and one of the favourites in the range of the ultra-silent classic design fans. The BlackSilentFan series is the perfect choice for customers looking for an affordable yet high-quality fan. High-quality components in combination with an intelligent setup result in a unique value for money ratio. The NB-BlackSilentFan-series achieves better results in almost all respects in comparison to standard fans.
Suurus:60 L x 60 W x 25 H mm tööpinge:4,5-13,8 V testitud:12V õhuvool:18 m3/h õhusurve:0,640 mm/H20 müratase:11,3 dBA kiirus:1600 RPM võimsustarve:0,48 W eestikeelne ülevaade:http://youtu.be/HnuOvu39nqk tootjalehel:http://www.blacknoise.com/en/products/it/13/Noiseblocker-NB_BlackSilentFan_60mm
That a quiet and reliable brandname fan doesn't have to cost much has been proven by us for years with the Blacksilent series. The ideal compromise between noise levels and power and the low price have made the Blacksilent fans the best-selling silent fans on the market! Upon frequent customer requests we now offer the XM1/2 in the format 40x40x10mm. Of course these fans also use the superior (((NB))) technology. Absolute top-notch quality - developed in Germany In detail: Original (((Noiseblocker))) quality: Extremely quiet, reliable and fail-safe Long-term silent operation: Speed perfectly suited for silent PCs which allow silent operation over a long lifespan Maximum safety: Almost inaudible and extremely long-lived NB-Longlife bearings and a high-grade NB-EKA motor result in an unbeaten failure rate of only 0,01%! Affordable and cool: The (((Noiseblocker))) BlackSilent series is one of the most affordable and reliable fan series on the market. The fans were developed in Germany and feature an outstandingly low noise emission as well as great reliability. Unlike with many cheap far-east made fans the noise level remains at it's low level for years. The reason is the choice of material and precise manufacturing methods. Unlike 95% of the so-called "fan manufacturers" (((Noiseblocker))) develops all fans in-house and uses only high-grade parts even in the "cheaper" series. The Blacksilent fans were designed to be more simple but just as reliable as the more pricey fan series. Unlike many competitors we do not give unrealistic technical data. We leave the choice to the customer if claims such as "400.000hrs MTBF" are realistic. Just by the way: 400.000 hours are more than 45 years.... With the Rev. 3 of the BlackSilent fan series you purchase a quality product which is optimized for low noise emissions. The fans are available in the sizes 40, 60, 80, 92 and 120mm. Of each size two versions are available: The 1-series is virtually inaudible and suitable for standard systems. The 2-series has very low noise emission an is powerful enough even for very potent systems. Als Lager kommt unser besonders langlebiges NB-NanoSLI ® Gleitlager zum Einsatz. The rate of failure was further reduced to 0,01% (before 0,15% of 100.000 units). The MTBF was improved with the Rev. 3 to real 80.000hrs Warranty: 36 months Technical details XR1: Dimensions : 40x40x10mm Weight : 15g Nominal voltage : 12 V Power consumption : 0,36W Nominal speed : 2800 (+/- 10%) Dielectric strength : 5 mA (max) Airflow : 4,9 m3/h Noise level: 11 dB/A MTBF (25°C) : 20 000 hrs. Connector : 3 Pin Molex with rpm lead Extent of delivery: 1 Fan 4 Vibration absorbers
StarTech.com FANBOX12. Sobilik: Arvuti korpus, Tüüp: Ventilaator, Ventilaatori läbimõõt: 12 cm. Toote värv: Must, Materjal: Plast, Kaabli pikkus: 0,3 m. Pinge: 12 V. Laius: 25 mm, Sügavus: 120 mm, Kõrgus: 120 mm
StarTech.com FAN6X2TX3. Sobilik: Arvuti korpus, Tüüp: Ventilaator, Ventilaatori läbimõõt: 6 cm. Toote värv: Must, Materjal: Plast. Pinge: 12 V. Laius: 20 mm, Sügavus: 60 mm, Kõrgus: 60 mm. Mõõdud (l x s x k): 60 x 60 x 20 mm, ...
As part of the Thermaltake philosophy with regard to the ultimate PC water cooling, Thermaltake has put together the RL140 water cooling kit and offers it to the discerning user in a limited edition. The kit includes a 140mm radiator, a CPU cooling block, a 14mm LED fan, a combination of high quality pump and expansion tank, appropriate coolant, as well as all necessary hoses and connections. Technical specifications: Type: water cooling set Compatible sockets: 115x, 1366, 2011, 775, AM2, AM2 +, AM3, AM3 +, FM1, FM2 Volume: 21.8dB Speed: 1000 rpm Fan bearing: Hydraulic Air flow: 102.9 m³ / h (60.55 cfm) Radiator Size: 1x 140mm Pump: 4Pin, 8-24V voltage, 1800-4800rpm Reservoir: 200ml capacity Fan: 140mm Weight: 5800 grams
Average Particle Size: 0.49 micron (0.000020 inch) Peak: –50°C to 180°C Long-Term: –50°C to 130°C Performance:3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core. Coverage Area:A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches. tootja lehel:http://www.arcticsilver.com/as5.htm
Conceived for industrial heavy duty applications that require enhanced cooling performance and advanced ingress protection, the NF-F12 industrialPPC (Protected Performance Cooling) is a ruggedised high-speed version of the award-winning retail model. Thanks to the outstanding aerodynamic efficiency of the NF-F12 design and the use of a novel three-phase motor, the industrialPPC version provides superior airflow and pressure capacity while keeping noise levels and power consumption moderate as against comparable high-speed fans. While its fibre-glass reinforced polyamide construction and certified water and dust protection make the NF-F12 industrialPPC Suitable for operation in challenging environments, the renowned SSO2 bearing technology guarantees an MTBF of over 150.000hrs. Topped off with Noctua’s trusted reliability and 6 years manufacturer’s warranty, the NF-F12 industrialPPC is an ideal choice for highly demanding applications that require superior flow rates and ultimate dependability.Attachment screwedPower Connection 3-Pin-fan connectorFan Bearing SSOPower Input 0 - 1.2 watt(s)Voltage Range 0 - 12 VNumber of Revolutions 0 - 2000 rpmVolume 0 - 29.7 dB(A)Volumetric Flow 0 - 121.8 m3/h, 0 - 71.7 cfmDimensionsFans Fan 1 120 x 120 x 25 mm
Suurus:92 L x 92 W x 25 H mm tööpinge:3,5-13,8 V testitud:12V õhuvool:50 m3/h õhusurve:0,630 mm/H20 müratase:17,5 dBA kiirus:1500 RPM võimsustarve:0,84 W eestikeelne ülevaade:http://youtu.be/HnuOvu39nqk tootjalehel:http://www.blacknoise.com/en/products/it/16/Noiseblocker-NB_BlackSilentFan_92mm
The aqualis ECO series reservoirs are equipped with a borosilicate glass tube which, unlike the acrylic glass commonly used for tube reservoirs, has very high hardness and scratch resistance, very low thermal expansion and excellent chemical and thermal resistance. The glass tube has an outer diameter of 75 mm and a wall thickness of 5 mm. The base and lid of the aqualis series are made of Delrin, the lid and bottom are connected by a nickel-plated brass tube. A visual highlight is the integrated water column effect. If the return line is connected to the central connection of the aqualis, the water flows through the central brass tube to the cover and exits through eight openings, which is a real eye-catcher especially in connection with lighting. A thin acrylic sheet close to the bottom of the aqualis minimizes air entry into the circuit. Alternatively, the return can be connected to a side port, the water then flows back from the ground into the surge tank. For this configuration, a baffle is included, which in turn ensures good ventilation of the circuit. The aqualis PRO variants also have an acrylic glass window integrated in the floor and can accommodate up to six LEDs (type 5 mm / not included)) and is additionally prepared for retrofitting a level measurement. Technical details:Dimensions: 80 x 300 x 80 mm (W x H x D)Filling volume: 880 mlScope of supply: A surge tank Two screw plugs G1 / 4 (pre-assembled) A stainless steel bracket A baffle plate made of stainless steel mounting hardware
Topote kirjeldus inglise keeles:The aquainlet PRO 100 ml reservoir is mounted directly on an aquastream XT or Eheim 1046 pump. The design of the expansion tank is perfectly matched to the pump. Expansion tank and pump form a unit after assembly. In this case, the guideways for the mounting plate in the expansion tank are continued, so is the first time a stable mounting of the plate under the focus of the unit possible. This allows easy use of decoupling rubbers or a shoggy sandwich. The expansion tank is sealed by an O-ring when plugged onto the suction nozzle of the pump, two latches lock into the pump housing and secure the expansion tank against removal and twisting, accidental loosening of the bayonet fitting of the pump is thus excluded. Two 90 ° offset connection threads (front and side) allow for flexible mounting of the return line, allowing the expansion tank to be used optimally even in confined spaces. The equalizer aquainlet Pro 100ml is closely related to the aqualis series and also equipped with a tube made of borosilicate glass, which in contrast to the commonly used for tube expansion tank acrylic glass very high hardness and scratch resistance, a very low thermal expansion and excellent chemical and having thermal resistance. The glass tube has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and lid are made of Delrin, the lid and bottom are connected by a stainless steel rod. Technical details:Material: Delrin, borosilicate glassDimensions without pump: approx. 56 x 67 x 153 mmThread: 4x 1/4 inchFilling volume: approx. 100 mlCompatibility: aquastream XT Eheim 1046 and identical pumpsScope of delivery: One expansion tank Three sealing screws G1 / 4 (pre-assembled)
With the series "airplex radical" the German water cooling specialist aqua computer offers a radiator series, which is tuned for performance and function at a fair price. The quad version for four 120 mm fans per side offered here comes with aluminum fins inside the stainless steel frame and is criss-crossed by four rows of copper pipes for extreme cooling performance. The airplex radical 4/480 is 520 mm long, 140 mm wide and 73 mm high. It can carry four 120mm fans out-of-the-box on one side, and if equipped with two-sided equipment, 16 optional threaded inserts (M3) must be purchased. The "airplex radical" series is based on the experiences that aqua computer has gained in the development of the "airplex modularity Series" (AMS), whereby much has been reduced to the essentials for the "airplex radical" models. This has created an extremely high quality processed radiator with an incredible price-performance ratio. Like the AMS brothers, the "airplex radical" heat exchangers have no solder joints and are therefore free from tin residues when delivered. Only Delrin, stainless steel and copper come into contact with the coolant - even with the variants with aluminum lamellae. For a perfect fan assembly, aqua computer has come up with a new system with high-quality nickel-plated brass threaded sleeves. This proprietary system is designed to allow the nuts to protrude into the holes in the fan, effectively dropping them into position themselves. Anyone who has ever installed fans on a radiator will appreciate this! The system also has the advantage that the thread is extended and the screw is further away from the lamellae, so that the risk of a screw screwed in too far is greatly reduced. In a radiator mounting without a fan, the sleeves can also be used turned 180 degrees, so that the heat exchanger can be mounted without a gap, for example, in a housing cover. Should a thread be damaged, you can simply replace the defective sleeve with a new one. In the guides for the sleeves also small locking lugs are integrated so that the sleeves securely engage in the final position on the frame. This is made of stainless steel and as a color accent, the rear end plate is made of dark chromated stainless steel. Technical details:Dimensions: 520 x 140 x 73 mm (L x W x H)Material: copper (tubes), aluminum (lamellas), stainless steel (frame), Delrin (connection terminal)silverCompatible fans: one-sided 4x 120 mm (M3 thread) Additional threaded inserts for double-sided assembly are optionally availablePipe rows: 4Thread: 2x G1 / 4 inches
The nickel-plated adapter from Bitspower in the color shiny silver, has a 90 degree angle and is rotatable. One side is intended for mounting hard tubes with an outside diameter of 12mm and the other side has a G1/4" external thread for mounting on radiators and Co. The two rubber rings seal the sides. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Angle: 90° Thread: G1/4 inch Connection: 1x Ø 12 mm
