Vaikne töö isegi maksimaalse võimsuse korral; Lai ühilduvus Inteli ja AMD-ga; Sisseehitatud LCD-ekraan temperatuuriteabe kuvamiseks; Pikaealine pump ja 6-aastane garantii; Alumiiniumist korpus ja vaskplaat tõhusa jahutuse ...
Effective thermal conductivity GLACIER 2g TG-04 thermal grease has excellent conductivity parameters, so it accurately fills microscopic spaces on the surface of the processor and heatsink. Silicones, which are contained in it, help to effectively cover the irregularities between the contacting elements, and the content of metal oxides influences the correct and fast heat conduction. Two weights TG-04 from Savio comes in two different weights: 1 g and 2 g. Thanks to the specially designed packaging, you are assured that the paste will not dry out after use. The product is designed for repeated use without fear of wasting it due to improper storage. Safety in application The thermal grease from Savio consists of metal oxides such as aluminum and zinc. This makes it non-conductive and very safe to use. You don't have to worry about short circuits or corrosion damage to the heatsink base and IHS. Ease of application GLACIER 2g TG-04 thermal grease, thanks to its consistency, ensures trouble-free application even for those without experience. Properly balanced density and packaging in the form of a practical syringe guarantee the easy application of the product on the processor. The kit comes with a practical spatula that will help in effective and precise application. Ideal for overclockers According to tests, TG-04 paste has a thermal conductivity coefficient of 14.5 W/mK. In many cases, increasing the operating frequency of components results in excessive heat power generation. This is eventually taken away by the cooling system. TG-04 paste helps dissipate heat from heated components, resulting in increased speed and performance of their operation. Technical specification: Thermal conductivity: 14.5 W/mK Working temperature: -50 - 280C Thermal impedance: < 0.095 C in2/W Density: 2.8 0.08 g/ml Electrical conductivity: 0 pS/m Package content: SAVIO GLACIER thermal grease User manual Spatula for spreading the grease
Thermal Grizzly introduces the Thermal Putty series, a new product line specifically developed for upgrading graphics cards and replacing thermal pads between PCBs and heatsinks. However, the Thermal Putty can also be used by hobbyists and experienced technicians for a variety of devices such as notebooks, handhelds, and gaming consoles. Flexible alternative to thermal pads with a wide range of applications Especially suitable for heatsinks with varying distances to key components Pro-version with very high thermal conductivity for high-end components Safe to use thanks to its electrically insulating properties The flexible alternative to thermal pads: The Thermal Grizzly Putty Pro Thermal Grizzly Putty is an electrically non-conductive alternative to conventional thermal pads. As an easy-to-apply, flexible gap filler, it compensates for height differences and is therefore ideal as a replacement for thermal pads on graphics cards and other devices. Typically, several types of thermal pads in varying thicknesses are used from the manufacturer, so when replacing the pads or modifying the cooler to a GPU water cooler, you would need several different pads. This issue is solved by the flexible application of Thermal Grizzly Putty. How much Thermal Grizzly Putty do I need? To upgrade a single, smaller graphics card without a backplate (e.g., GeForce GTX 1060), about one 30-gram jar of Thermal Grizzly Putty is needed. For a larger graphics card such as a GeForce RTX 4090, a 30-gram jar is generally sufficient for the memory (VRAM) and voltage regulators (VRM) on the front side. On the back side, between the PCB and the backplate of larger graphics cards, there is often a uniform, larger gap. Here, about two 30-gram jars or one 100-gram jar are needed if you want to completely fill this space. Three versions for different applications With three different versions, the manufacturer offers the right product for every performance class. The Basic version is suitable for efficient components with low heat generation. The Advance version, with higher thermal conductivity, is intended for midrange components with greater power. For the high-end segment, Thermal Grizzly offers Putty Pro, which provides optimal cooling for your high-end components thanks to its outstanding thermal conductivity. Flexible and safe to use Before application, the target surface should be thoroughly cleaned and degreased, for example with Thermal Grizzly cleaning wipes or standard isopropanol. Thanks to its electrically insulating property, it can be spread over large areas with the included spatula. Alternatively, the Thermal Putty can be shaped by hand into small balls, which can be matched in size to the area to be covered (e.g., VRAM, SMD).
Dimentions: 5.25″ bay Power Output: Up to 30w per Channel Face Plate Color Available: Black Anodized/Silver Aluminium DC Input: +12v (Standard 4-Pin Connector) DC Output: 0-12v Changeable Display Color: Red, Yellow, Green, Cyan, Blue, Purple, White Control Channels: 4 tootja lehel:http://www.lamptron.com/product/controllers/fc5-v2/
The final touch for a perfect PC You spend a lot of time to make your PC perfect. You’ve upgraded it for top performance, ultimate quietness, and unbeatable reliability. So what’s next? Our premium upgrade Power Cables, that’s what’s next. High quality, premium function, and flat out good looks come together in our line of premium Power Cables, intended for use with your high capacity be quiet! cable management power supply. These sleeved beauties in black are available in 8 S-ATA models for maximum convenience and compatibility with all type of cases, and come with a 3 year warranty. Mix and match lengths and connector arrays to achieve the perfect combination of stylish good looks, improved cooling airflow, and peripheral device support.
Dimensions: 30 x 30 x 1,0mm Thermal conductivity: 8.0 W/mk Temperature range: -100°C / +250°C Maximum bridgeable gap: 1,0 mm Muu info: Ei juhi elektrit.
The Z-Multi Water Tank from Bitspower has two screw-in POM covers, one with only one G1/4" thread and the other with three G1/4" threads. In the cover, where there is only one G1/4" thread, an adapter is already screwed in, which flows in three individual jets against the reservoir when it is used as an inlet. In the cover, with three threads, a flow pipe is installed in one of the threads, which is usually used as an inlet. If the inlet starts from the upper side, i.e. on the opposite side of the flow pipe, the outlet should not be through the flow pipe, as in the case of a water level below the pipe, air would otherwise enter the cooling circuit. Two plugs are included to close the openings that are not used. One plug is shiny silver, while the other is transparent and has a hole for an optional LED illumination. Two clamps are also included to mount the reservoir to the case or something else. Technical Data: Material: Acrylic, POM Acrylic Tube Color: Clear Dimension: 120 x 60 mm (H x Φ, +/-3%) Length without Cover: 100 mm Inner Diameter: 50 mm Thread: 4x G1/4" Scope of Delivery: 1x G1/4" Silver Shining Stop Fitting, 1x G1/4" Silver Shining Aqua-Pipe I, 1x G1/4" Silver Shining Anti-Cyclone Adapter, 1x G1/4" Crystal Stop Fitting I With 5MM LED Hole, 2x Tank Clamp
ORCUS 140 Orcus is the evolutionary all-in-one CPU water cooling system from Raijintek. The AIO was developed and designed in Germany and through many years of experience in the field of water cooling, this product, in cooperation with global engineers, has become one of the most powerful AiO water cooling systems on the market. By externally mounting the pump, no vibrations are transmitted to the mainboard or case, contributing to the quiet operation of your silent gaming computer. What's new in this context is that instead of the pump normally installed in the CPU cooler, a flow indicator has now been installed and the level of the AiO can be checked. What of course should not be missing for today's gaming computers is the addressable RGB lighting. The integrated aRGB LEDs are located in the CPU cooler and the fans also shine in your case. With the included addressable RGB controller you can easily syncronize the aRGB lighting with your existing aRGB lighting or if there is no aRGB lighting yet you can adjust it with the remote control according to your needs. Technical details Compatible sockets: Intel® All Socket LGA 775/115x/1366/201x/2066 AMD® All AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2 radiator Dimensions [l×b×h] 272×120×27 mm Material: aluminium Pump: Dimensions [l×b×h]: 69.5×40×33 mm Bearing type:Ceramic Axis Q-max / throughput: 66 L/H Pressure Head: 1.3 meters Noise level: 25 dBA [Max.] Service life: 50,000 hours Speed: 5000±10% R.P.M. @ 12VDC Rated Current: 180mA Input voltage: 12 V Power consumption: 2.2 W Fan: Dimension [l×b×h]: 140×140×25 mm Input voltage: 12V Starting voltage: 5V Speed: 400~1500 R.P.M. Bearing type: Hydromount Air Flow: 65.19 CFM [Max.] Air Pressure: 1.22 mmH2O [Max.] Lifetime: 40,000 hours Noise level: 30 dBA [Max.] Connection: 5V ADD header, PWM 4 pin header Rated Current: 0.14±10% A Power consumption: 1.68±10% W LED Rated Current: 0.69A [Max.] LED Power consumption: 8.28W [Max.] Accessories: 1x 8 port Controller Box 1x remote control 1x connecting cable Hint: 1. keep in a safe place for children. 2.check the list of components and the condition of the product before installation. If there is a problem, contact your dealer for a replacement or refund. 3.RAIJINTEK Co., Ltd. shall not be liable for damage caused by external influences, including improper use, power supply problems, accident, neglect, modification, repair, improper installation and inspection. Improper installation may damage the CPU and motherboard. 5. damage to the tank seal will void the warranty. 6.this product is an all-in-one water cooling solution, if you disassemble it or use other parts not approved by RAIJINTEK, the warranty will be void.
Adressierbare Wing-Boost-3-Lüfter von Alpenföhn, Triple-Set mit 3x 120 mm, digital adressierbare RGB-LED-Beleuchtung (3-Pin), PWM-gesteuert, inklusive Fernbedienung, Empfänger, Splittern & Schrauben
When developing the new BioniX P120, special emphasis was placed on a focused air flow and a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Numerous improvements, such as engine technology and a newly developed fan design, have noticeably increased the performance of P fans. In internal performance tests, the new P fans leveled out to 28 dB (A) left many competitors behind. Technical Details Fan: 120 mm, 200 - 2,100 rpm (PWM controlled) Air flow: 67.56 CFM / 114.79 m3 / h (@ 2,100 rpm) Noise level: 0.45 sone (@ 2,100 rpm) Static pressure: 2.75 mm H2O (@ 2,100 rpm) Typical voltage: 12 V DC Cable length: 400 mm PST cable length: 50 mm
A-RGB for Full Colour Control The 12 A-RGB LEDs installed in the BioniX P120 A-RGB are autonomously controllable. The BioniX P120 A-RGB is compatible with the common A-RGB standards of leading motherboard manufacturers for the simplest possible use. It can therefore be fully illuminated directly via the A-RGB motherboard connection or via an external controller and synchronized with other hardware lighting. Easy installation and extension via Connector Technology The ARCTIC BioniX P120 A-RGB have a modular cable management and use two connections: a power-in and a connector output. ARCTIC uses an 8-pin connector for this, which forwards both the fan and lighting signals and considerably simplifies the cabling *. The included connector block also enables a wireless series connection. * all necessary cables are included High-quality plain bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced, increasing efficiency. In this way, less heat is generated, there is less bearing noise and the service life of the fan is extended. Optimised for static pressure With the BioniX P120 A-RGB, as with the entire P-series, special emphasis was placed on a focused airflow and high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. This makes the BioniX P120 A-RGB particularly suitable for use on heat sinks and radiators as well as with aperture plates and filters. Maximum smoothness, minimum vibration The operating noise of the newly developed ARCTIC motor is barely noticeable even at the lowest speed. Thanks to sinus magnetization, the P fan's motor generates only 5% of the commutation vibrations of a conventional DC motor. In addition, the ARCTIC BioniX P120 A-RGB has rubber pads on its contact surfaces for further decoupling. 400 to 2300 rpm regulated via PWM With a wide speed range and the connector functionality, the fan speed of the BioniX P120 A-RGB can be controlled synchronously with other fans. This reduces the noise development to a minimum while at the same time guaranteeing maximum cooling performance. Technical Data General Specifications Fan Speed: 400 - 2300 rpm Airflow: 48 CFM | 81,55 m³/h Static Pressure: 2,1 mm/H2O Noise Level: 0.45 Sone RPM Controll: PWM Connector: 2x A-RGB Fan 8-pin Connector Fan Bearing: Fluid Dynamic Bearing Electrical Fan Specifications Typical Voltage: 12 V DC Startup Voltage: 7 V Current: 0.13 A Cable Length: 400 mm + 80 mm A-RGB Specifications Number of LEDs LEDs: 12 A-RGB LEDs Typical Voltage: 5 V Current: 0.38 A Size & Weight Lenght: 120 mm Width: 120 mm Height: 30 mm Weight: 209 g
The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 socket. With the included AM4 mounting bracket, the Alphacool Eisbaer Pro CPU cooler can also be used on AMD Ryzen processors. Large cooling surface The cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. With the additionally available AM4 bracket, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible. Copper radiator As per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen. Real water cooling The Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system. Fan and lighting The entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The Alphacool Rise Aurora fans are also fully illuminated with 5V aRGB LEDs. The fan frame a unique pattern with many small cutouts that create a particularly noble effect. You do not see individual LEDs and the lighting is much more interesting than a simple LED ring. Of course all Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible. How to connect everything The fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard. The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market. Data radiator L x W x H 279 x 124 x 30 mm (+/- 3%) Material cooling fins Copper Material chambers Copper Material cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes For fan size 120 mm Possible fan assembly 2 x one-sided / 4 x both-sided Data cooler and pump L x W x H 64 x 79 x 54,3 mm Number of LEDs 10x Digital RGB LEDs Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ (+ 1x Fillport G1/4“) Pump typ DC-LT Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Voltage 12V DC Power consumption 4W MTBF 50.000 h Data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 118,9 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Net weight 187 g Max working temperature 60 °C Certificates CE, FC, ROHS Compatibility list: - Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189 - AMD: AM4 / TR4 / sTRX4 / SP3 / sWRX8
OPTIMISED FOR STATIC PRESSURE During the development of the new P8 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST is particularly suitable for use on heatsinks and radiators. MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P8 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. MAXIMUM QUIETNESS, MINIMUM VIBRATION Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. EXTENDED LIFE SPAN A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Therefore Arctic extends the warranty to 10 years. 200 TO 3000 RPM REGULATED VIA PWM PST Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed. HIGH QUALITY BEARING Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data Performance Fan Speed: 200 - 3000 rpm Airflow: 23.4 CFM / 40.3 m³/h Static Pressure: 1 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: PST Connector: 4-Pin Connector + 4 Pin Socket Fan Bearing: Fluid Dynamic Bearing Electric Characteristics: Typical Voltage: 12 V DC Starting Voltage: 0 V Current: 0.09 A Cable Lenght: 400 mm Size & Weight Lenght: 80 mm Width: 80 mm Height: 25 mm Weight: 81 g
The CORSAIR iCUE H100i ELITE CAPELLIX XT Liquid CPU Cooler offers superior, high-performance cooling for your CPU, featuring CORSAIR AF RGB ELITE fans, a 240mm radiator, and brilliantly bright CAPELLIX LEDs. It is compatible with a wide range of sockets, including Intel: 1700, 1200, 1150, 1151, 1155, 1156, 2011, 2066, and AMD: AM4, sTRX4, sTR4, ensuring broad compatibility with various CPU models.
