Der Thermal Grizzly CPU Contact Frame Intel 1700 LT ist die „Lite“-Version des Intel 13th/14th Gen CPU Contact Frames und wird im kostengünstigen Spritzgussverfahren hergestellt. Um die notwendige Stabilität für den Contact Frame zu erreichen, wird ein hochwertiges Acrylnitril-Butadien-Styrol-Copolymer mit einem 15-prozentigen Glasfaseranteil verwendet. Die Innenkontur der Lite-Version ist identisch mit der des aus Aluminium gefrästen Frames. Der standardmäßige Integrated Loading Mechanism (ILM) verfügt über Kontaktpunkte, die sich in der Mitte der länglichen CPU befinden. Durch den daraus resultierenden ungleichmäßigen Anpressdruck des Prozessors in den Sockel, wölbt sich die Oberfläche des Integrated Heatspreader (IHS) konkav. Dadurch liegt die Bodenplatte des CPU-Kühlers hauptsächlich auf den Kanten des IHS auf, so dass der thermische "Hotspot" in der Mitte der CPU nicht optimal abgedeckt wird. Der CPU Contact Frame Intel 1700 LT hat eine spezielle Innenkontur, um den Anpressdruck bei der Montage von der Mitte der CPU zu den Kanten zu verlagern. Dadurch wird die konkave Wölbung des IHS vermieden. Dies führt dazu, dass CPU-Kühler besser auf dem Prozessor aufliegen und eine größere Kontaktfläche haben, um die Abwärme der CPU abzuleiten. Die Installation des Contact Frames ist sehr einfach und erfordert nur wenige Schritte. Je nach CPU-Kühler und verwendeter CPU können die Temperaturen des Prozessors spürbar gesenkt werden. Der CPU Contact Frame Intel 1700 LT ist mit Prozessoren der 12., 13. und 14. Generation für den Sockel LGA1700 kompatibel. Zusätzlich ist der Frame mit CPUs kompatibel, deren Integrated Heatspreader (IHS) um nicht mehr als 0,2 Millimeter abgeschliffen wurde. Bei der Montage ist darauf zu achten, dass sich keine elektronischen Bauteile unter dem Frame befinden. Hierauf ist besonders bei Mainboards mit dem Mini-ITX-Formfaktor zu achten.
Product Details: Thermal Grizzly - Basic TG Putty Basic is a non-electrically conductive alternative to traditional thermal pads. This easy-to-apply and flexible material serves as a "gap filler," effectively compensating for height differences. It is an ideal replacement for thermal pads on graphics cards, where different pad thicknesses are typically used. When replacing pads or upgrading to a GPU water block, multiple thermal pad sizes are usually required. TG Putty can be applied using the included spatulas or by hand (gloves recommended). The spatula allows for smooth, even application over larger areas, while alternatively, the putty can be shaped into small beads that precisely fit components such as VRAM or SMDs. TG Putty can compensate for height differences ranging from 0.2 mm to 3.0 mm. Available Variants:TG Putty comes in three versions, each offering different levels of thermal conductivity: TG Putty Basic – Medium thermal conductivity TG Putty Advance – Good thermal conductivity TG Putty Pro – High thermal conductivity For upgrading a smaller graphics card without an active backplate (e.g., GeForce GTX 1060), a single 30g jar of TG Putty is usually sufficient. For larger models, such as the GeForce RTX 4090, one 30g jar typically covers the memory (VRAM) and voltage regulators (VRM) on the front side. Since high-end graphics cards often have a uniform gap between the PCB and the backplate, fully filling this space may require two 30g jars. Important Notes: TG Putty is not suitable for direct application on processors (IHS or Direct Die) or GPU chips. Before applying, ensure that the target surface is thoroughly cleaned and degreased using TG Cleaning Wipes or standard isopropanol. Package Contents: 1x TG Putty Basic 3x Spatulas
Forget generic coolers. While other AIOs may look like they came off the same assembly line, the Valkyrie V-Lite stands out with a unique mechanical design that looks like it belongs on a war machine. With our patented pump and fans, designed specifically for liquid cooling radiators, it manhandles heat into submission with ease. Award-winning high-speed pump [2800 RPM] Valkyrie B12 fans designed specifically for radiators [4.0 mmH₂O] 90° rotatable pump top with visible circuit board 5-year warranty
Harness the power of precision engineering with the Valkyrie Vind SL125 air cooler. Built for extreme heat dissipation, silent operation and breathtaking aesthetics, it’s the perfect solution for gamers and PC enthusiasts seeking elite performance. Six copper heat pipes and a precision-engineered 50-fin array for superior heat dissipation Valkyrie X12 ARGB fans with fluid dynamic bearings for high airflow and ultra-quiet operation ARGB LED heat sink and fans for stunning lighting effects and full RGB synchronization Universal compatibility with AMD AM5/AM4 and Intel LGA 1851/1700/1200 sockets Easy-installation design with a secure mounting system for a hassle-free setup 5-year international warranty, guaranteeing long-term reliability and peak performanceAMD: AM5, AM4 Intel: 1851, 1700, 1200, 1151 Basic Info CPU TDP: 230W Warranty: 5 Years Dimensions: 195 x 169 x 222 mm RGB Connector: 3-Pin A-RGB Connector Fan Power Connector: 4-Pin PWM Connector Heatsink Material: Aluminium Dimensions: 125 x 109 x 157.5 mm Number of fins: 50 Gap between fins: 2.15mm Heatsink Fans Fan: 1x Valkyrie X12 A-RGB + 1x Valkyrie X12 Reversed A-RGB fans Speed: 800 - 2150RPM ± 10% Air Flow: 80CFM / 135.92 m³/h Static Pressure: 3.14 mmH₂O Maximum noise level: 29 dBA (Max) Bearing: Fluid Dynamic Bearing Current: 0.2A Voltage: 12V
The Surge SL125 is a premium air cooler engineered for high-performance CPU cooling. It features a robust copper base and multiple heat pipes that deliver excellent heat dissipation. The advanced aluminum radiator design ensures optimal airflow, while the included Valkyrie fan provides strong cooling performance with minimal noise. Compatible with a wide range of Intel and AMD sockets, this cooler is perfect for modern systems. With all necessary mounting accessories included and a 3-year warranty, the Surge SL125 offers reliable and efficient cooling for your setup.Technical Details Size: 120 × 72.5 × 155mm Heatpipe Dimension: 6mm × 4pcs Number of Radiator Fins: 48 Weight: 0.98kg Radiator Fins: T: 0.4mm Gap: 2.2mm Base Size: 40.60 × 35 mm Base Material: HDT Pipe Material: Copper Radiator Fins Material: Aluminium Manufacturing Process: Press Fin TDP: 230W Fan Details Fan Model: Valkyrie B12 Fan Material: PBT+GF30% Frame / PC Blades Fan Size: 120 × 120 × 25mm Fan Speed: 800–2150RPM ±10% Noise Level: 30–5dBa Fan Airflow: 81.68CFM Fan Static Pressure: 4.0mmH2O Current: 0.2A Voltage: 12V RGB Technology: ARGB Gen1 Bearing Type: Fluid Dynamic Bearing Compatibility Intel Sockets: LGA 1150 / 1151 / 1155 / 1156 / 1200 / 1700 / 1851 AMD Sockets: AM4, AM5 Enclosed 1× Valkyrie Surge SL125 1× Valkyrie B12 1× Installation Guide 1× Accessories Warranty 3 years
Tootekood: ZM-AF120R ARGB WHITEGTIN: 8800263650286Jahutid ja lisad
Zalman ZM-AF120R ARGB White Verleih deinem PC-System einen visuellen und leistungsstarken Boost mit dem ZM-AF120R ARGB White Lüfter. Dieser 120mm Lüfter kombiniert eine außergewöhnliche Kühlleistung mit individuell anpassbarem RGB-Licht, das für eine beeindruckende Optik sorgt. Perfekt für Gamer, PC-Enthusiasten und alle, die auf der Suche nach einer effizienten und stilvollen Kühlungslösung sind. Hauptmerkmale: Optimale Kühlleistung: Mit einer Drehzahl von bis zu 1.500 U/min sorgt der ZM-AF120R ARGB White für eine beeindruckende Luftzirkulation von bis zu 46.6 CFM und eine maximale statische Druckleistung von 0.9mmH2O. So bleibt dein System selbst bei hoher Belastung kühl und stabil. Geräuscharme Leistung: Dank der Hydro Bearing-Technologie arbeitet der Lüfter bei maximal 24.3 dB(A), was ihn nahezu unhörbar macht und für eine ruhige Arbeits- und Spielumgebung sorgt. Langlebigkeit und Zuverlässigkeit: Mit einer Lebensdauer von bis zu 40.000 Stunden bietet der ZM-AF120R ARGB BLACK eine langanhaltende und zuverlässige Leistung, sodass du viele Jahre von seinem herausragenden Kühlpotenzial profitieren kannst. Individuell anpassbare ARGB-Beleuchtung: Der Lüfter ist mit einer modernen ARGB-Beleuchtung ausgestattet, die via 4-Pin Anschluss einfach gesteuert und angepasst werden kann. Bring Farbe in dein System und lasse es im perfekten Licht erstrahlen. Robustes Design: Der Lüfter ist aus hochwertigen Materialien wie PBT und PC gefertigt, die für ihre Langlebigkeit und Beständigkeit bekannt sind. Der elegante schwarze Look passt perfekt zu jedem modernen Gaming-PC oder High-End-Arbeitsrechner. Der ZM-AF120R ARGB White ist nicht nur ein Lüfter, sondern ein echtes Upgrade für dein System. Mit einer ausgewogenen Mischung aus exzellenter Kühlleistung, extrem leiser Funktionsweise und individuell einstellbarem RGB-Licht setzt dieser Lüfter neue Maßstäbe für PC-Enthusiasten. Ob du ein ruhiges Gaming-Erlebnis suchst oder deinen PC zu einem echten Hingucker machen möchtest – der ZM-AF120R ARGB White bietet dir die perfekte Lösung.
Kompakter 240 mm Radiator für Wasserkühlungen, aus Kupfer, hohe Finnendichte, für besonders kleine Custom-Loops, für Hardware aus dem Mittelklassensegment
Watercool HEATKILLER® RAD 360-S Stainless Steel - Compact High-Performance Radiator with Exclusive Design! Enhance your water cooling system with the new HEATKILLER® RAD 360-S Stainless Steel - a high-quality mesh radiator that combines performance, design, and quality at the highest level! The HEATKILLER® RAD 360-S Stainless Steel is a 30 mm thick radiator that offers outstanding cooling performance despite its compact dimensions. It impresses with Watercool's signature high-quality workmanship and an exclusive design featuring brushed stainless steel. Highlights: High-performance cooling mesh: Equipped with brass pre-chambers and copper fins for optimal heat dissipation. Compact dimensions: With a thickness of only 30 mm, it fits even in compact cases. Exclusive design: The frame and side panels made of brushed stainless steel give the radiator a particularly elegant look. Optimized for fans: Supports up to six 120 mm fans in push-pull configuration for maximum cooling performance. Easy integration: Two standard G1/4" threads allow for easy integration into the cooling circuit. High-quality workmanship: "Made in Germany" - Finishing and quality control are carried out in Germany. Technical specifications: Dimensions: 398 x 120 x 30 mm (L x W x H) Weight: 0.92 kg Color: Brushed stainless steel Connections: 2x G1/4" threads Fan compatibility: Up to 6x 120 mm fans (push-pull) Radiator mounting: M3 The HEATKILLER® RAD 360-S Stainless Steel is the perfect choice for demanding water cooling systems that value performance, design, and quality, and desire a touch of luxury.
Kompakter 120 mm Radiator für Wasserkühlungen, aus Kupfer, hohe Finnendichte, für besonders kleine Custom-Loops, für Hardware aus dem Einsteigersegment
Kompakter 280 mm Radiator für Wasserkühlungen, aus Kupfer, hohe Finnendichte, für besonders kleine Custom-Loops, für Hardware aus dem Mittelklassensegment
The Kolink ARGB 3-Pin extension cable allows you to extend a D-RGB source to create an aesthetically pleasing lighting system. It features standard 3-pin addressable RGB headers from male to female. The extension cable can be used with any standard 3-pin 5V RGB controller or with all commonly used RGB headers from major motherboard manufacturers. The arrow marking on the 3-pin LED connector should be aligned with the +5V marking on the D-RGB header.
EK Water Blocks EK-Quantum Surface P360 - Black Edition With a thickness of 44 mm, the EK-Quantum P-series surface radiators are the absolute all-rounders for low noise and high performance across the entire fan operating range. Black Edition Surface Radiators are equipped with two G1/4" threaded connections. A total of sixteen 2 mm wide copper tubes over the entire length of the cooler ensure optimal coolant flow and do not burden your cooling circuit. High-quality finless copper fins with a density of 18 FPI ensure the best balance between heat transfer and air resistance, enabling optimal performance even when the fan is running at low speeds. To maximize cooling performance, a push/pull setup can be used with any EK-Quantum P-series Surface cooler. New and improved The EK-Quantum Surface P series cooler maximizes performance by using a new cooler core. When comparing core-to-core performance, the Surface P cooler performs up to 10% better than its predecessor, the CoolStream PE, thanks to its improved fin structure and optimized core. EK-Quantum Surface Premium radiators are based on years of development and market research to deliver the best product in every respect that the market demands. The processing of the materials, the mechanical rigidity and the performance have been taken to a new level. Like all other products in the Quantum Line, EK's brand new surface coolers offer numerous performance improvements, including thermal performance, coolant flow restriction and airflow restriction. With the included screws, this cooler is compatible with 120mm fans, which have a thickness of 25mm as standard. EK recommends using EK fans or similar with sealed frames. This classic but effective square shape of the fan housing ensures optimal performance in pull (suction) or push (pressure) mode without hydraulic losses, ensuring the optimal cooling performance of your liquid coolers. Thick extruded aluminum end caps with a subtle black finish give the cooler a premium look and feel. They cover the interior and connect the stamped side panels, creating a sturdy structure that is comfortable to handle. The stainless steel side panels are coated with durable semi-gloss black paint, while the fins themselves feature a special black matte coating with a high thermal conductivity coefficient. 360 mm Black Edition – Stealthy, all-black design Every cooler part is completely black - frame, end caps, connector adapters, fins and even the screws. The Black Edition of the EK Quantum Surface P360 features exceptional build quality, advanced liquid cooling features and a user-friendly installation process. Thanks to premium materials and precision engineering, this product offers long-lasting performance and reliability for even the most demanding PC users. In addition, the sleek and minimalist appearance is perfect for those looking for a powerful liquid cooling solution without sacrificing style. It is ideal for three or six 120mm fans, depending on whether users prefer a push-pull setup. The blacked-out design allows the product to blend seamlessly into any PC system, making it the perfect addition for those who want a clean and minimalist aesthetic. With its striking and stylish look, the Black Edition of the EK Quantum Surface P360 is sure to turn heads and take any PC setup to the next level. M4 screws – standardized, easy to find Heavy-duty black M4 Philips round head screws are included for ease of use. In general usage scenarios, EK strongly recommends using only the included screws to avoid damage to the cooler itself. However, the M4 screw compatibility allows users to source longer screws if needed. The cooler core is designed in such a way that even if the customer accidentally uses longer screws, it will not affect the structural integrity of the cooler core as they will only collide with the fins. Easy disassembly – DIY modding dream The EK Quantum Surface range has been designed and engineered as a modular product range rather than individually sized radiators. Such a design ensures a flawless fit and continuity in appearance while making the disassembly process very simple and straightforward. EK has always supported the DIY modding community, so painting and modifying your Surface radiator is a breeze. Loop friendly – Don’t worry about your pump The internal structure of the coolers has been designed with low flow restriction so as not to place unnecessary strain on the rest of the cooling loop. This means that you can add multiple radiators to your cooling loop using just a single pump (D5 or DDC). The coolers are also airflow friendly and low restriction, allowing operation at lower fan speeds while maintaining the same performance. Low airflow restriction ensures that the case is well ventilated and other radiators in the case can breathe properly. EK-Matrix7 compatible – for the cleanest pipe runs Since each custom liquid cooling loop is made up of multiple EK products, the most valuable difference in terms of aesthetics and usability comes from the sum of all the parts. To address this problem, EK launched Matrix7, a system that standardizes product dimensions and connector location and spacing. This way, we make liquid cooling loop assembly more intuitive and ensure a clean set of parallel pipe runs easier than ever before. All EK-Quantum Surface emitters are EK-Matrix7 compatible, meaning they integrate effortlessly with Reflection², the second generation of Quantum distribution panels. This allows the user to easily swap and upgrade between S-, P- and X-series surface emitters within the same enclosure (provided the enclosure supports thicker emitters in the same position). EK-Quantum Surface P wins TechPowerUp’s Highly Recommend Award The EK-Quantum Surface P cooler has been awarded the "Highly Recommend" award by TechPowerUp . The reviewer praises this cooler and points out numerous advantages, including excellent thermal performance, very little restriction of coolant flow, five usable ports, modifiable with soon-to-be-available replacement cover plates, two color options to choose from, offset screw holes for coolant tubes, etc. "The new EK-Quantum Surface P is more than worth recommending as it can compete strongly with the thicker 60mm heatsinks and even outperform some of them," writes TechPowerUp. Technical and material specifications: High-quality fins made of 99.9% copper Copper H90 pipes End tank chambers made of brass H62 Stainless steel side panels End caps made of extruded aluminium in black Brass nickel-plated adapters and plugs Dimensions: 405 x 130 x 44 mm (L x W x H) Weight: 1.6kg FPI: 18 Connection thread: 2x G1/4 inch Fan compatibility: 120 x 120 x 25 mm fan Pressure tested: 1 bar Attached: EK-Quantum Surface P-Series Coolers 12x Phillips M4x30mm for 25mm thick fans 12x Phillips M4x5mm for direct mounting of the cooler on the housing Designed and engineered in Slovenia, manufactured in China.
Darkflash DH240D CPU water cooling (white)Darkflash DH240D is an advanced water cooling that combines a modernistic design with maximum performance and quiet operation. Its compatibility with both Intel and AMD platforms makes it an ideal choice for any computer. The integrated segmented LED screen provides a convenient preview of the cooling operation, and with ARGB lighting for ASUS, MSI and GIGABYTE motherboards you will get spectacular visual effects. The water block's copper base effectively dissipates heat, working with a 240mm aluminum heatsink and two powerful PWM fans for both optimal airflow and quiet operation. Bet on the Darkflash DH240D - a reliable cooling that will highlight the character of your PC and allow you to get the most out of it!ARGB integration and a clear segmented screenWith the Darkflash DH240D, you gain full integration with the popular RGB LED Sync lighting systems used on motherboards from ASUS, GIGABYTE and MSI. This makes it easy for you to sync the lighting effects and get a spectacular visual experience that enhances the character of your PC. The ARGB effects will make your hardware look modernistic and original in any interior. The integrated segmented screen displays CPU cooling data in detail. Thanks to its low power consumption and high readability even in low light, the screen instantly informs you about the most important cooling parameters. The displayed data is clear, legible and always under control, allowing you to react quickly and optimize the computer's performance for your work.Universal compatibilityWhether you use an Intel or AMD platform, Darkflash DH240D guarantees full support for the latest processors from both manufacturers (Intel LGA2011/2011-V3/2066/1366/115X/1700, AMD FM1/FM2/FM2+/AM2/AM2+/AM3/AM3+/AM4+/AM5). This versatility gives you complete configuration freedom and provides you with a future-proof solution that will work even after you purchase a new computer kit.Solid construction for maximum performanceDual construction and a precision-engineered pump impeller provide significant improvements in cooling stability and longevity. This means less vibration, lower noise and higher efficiency, even under intense load. The Darkflash DH240D will easily meet the demands of gamers as well as professionals involved in video processing, graphics or streaming.High-quality copper water blockThe base of the water block made of pure copper ensures excellent heat conduction, which translates into fast dissipation of heat energy from the processor. As a result, your computer maintains a stable temperature even during hours of work or intense gameplay.Cooling at the highest levelThe powerful 240-millimeter aluminum heatsink provides excellent heat exchange, ideally suited for overclocking the CPU, which is crucial during intensive computer operation. Two 120-millimeter PWM fans, whose speed is adjustable from 800 to 2,000 RPM, provide optimal airflow (59.1 CFM) and high static pressure (1.73 mm-H2O), guaranteeing top-level performance.Efficient and quiet operationThe Darkflash DH240D is a solution that offers quiet operation without sacrificing high functionality. The 3200 RPM pump generates a noise level of just 23 dBA, while the fans generate up to 30 dBA. This makes the cooling quiet yet effective, which will prove especially useful in home and office environments where quiet operation is particularly important.IncludedIntel/AMD backplanethermal pasteAM5 screws x4Intel bracket x2AMD bracket x2Intel 115x spacer screws x4Intel 20xx spacer screws x4Intel 1700 spacer screws x4mounting screws x4mounting screws x4rubber washers x4AMD clips x4ARGB PWM 120 mm fan x2fan mounting screws x8heatsink mounting screws x8USB-C to USB 2.0 cablePWM hubuser manual ManufacturerDarkflashModelDH240DWater block size97.2 x 67.5 x 68.55 mmPump speed3200 ±10% RPMVoltageDC12VNoise level of the pump23 dBA ±10% (at a distance of 1 m)Heatsink size274 x 120 x 27 mmCable length400 mmSize of fans120 x 120 x 25 mm (x2)Fan speed800 ~ 2000 ±10% RPMAirflow59.1 CFMStatic pressure1.73 mm-H2ONoise level of fans30 dBA ±10% (at a distance of 1 m)Bearing typeHydro BearingService life (MTTF)40,000 hoursDisplay typeSegmented LED screenColorWhite
Darkflash DV360S CPU water cooling (white)The Darkflash DV360S is an extremely powerful water cooler for Intel and AMD processors that combines advanced technology with a modernistic design. Equipped with a 360-millimeter heatsink and three low-noise PWM fans, it efficiently dissipates heat, ensuring stability even during intense gameplay. Its ARGB backlighting with 5V sync and IPS LCD screen allow you to fully personalize the visual effects. The copper water block and pump with ceramic bearings guarantee high cooling efficiency and long life. Flexible FEP cables simplify installation, and the aluminum heatsink supports overclocking. In addition, the PWM hub allows precise fan control, and the anti-vibration system reduces noise. The Darkflash DV360S is the ideal solution for demanding gamers who want top performance and stylish design from their device.Perfect cooling for your hardwareDarkflash DV360S is an advanced water cooling system that combines excellent build quality with impressive performance. With a 360-millimeter heatsink and three 120-millimeter PWM fans, it ensures accurate heat dissipation and optimizes CPU temperatures even during intense gaming sessions and demanding calculations. Low-noise fans guarantee quiet and stable system operation, eliminating the problem of hardware overheating. This is hardware that will meet the expectations of any gamer.Wide compatibility and safe useWhether you use Intel or AMD processors, the Darkflash DV360S offers full support for a wide range of sockets. Compatibility includes LGA2011, LGA2066, LGA1700, as well as AM4+ and AM5 sockets, among others, making this kit a universal solution for many configurations. An added bonus is easy installation thanks to the included clips, which require no additional tools. The DV360S uses hoses made of FEP material, which provides exceptional resistance to abrasion and high temperatures. Thanks to the flexibility of the hoses, installing the system in the computer case is extremely easy, and the leak-proof design guarantees safe use without the risk of leaks.Tailored to your preferencesWith ARGB 5V support, Darkflash DV360S offers spectacular lighting effects that can be synchronized with your ASUS, MSI, GIGABYTE or ASROCK motherboard. The use of Addressable RGB technology allows you to choose from 16.8 million colors, giving you almost unlimited personalization possibilities. What's more, the cooler is equipped with a 3.2-inch IPS LCD display with a resolution of 320 x 320 pixels, which allows you to display system parameters, dynamic themes or custom graphics (in JPG, PNG, GIF formats), which gives the whole set a unique style."Infinity Mirror" and magnetic screen mountingThe striking RGB backlighting doesn't end with the fans - the use of the "Infinity Mirror" effect creates a mesmerizing lighting effect that gives the case a futuristic look. In addition, the LCD screen can be rotated 270°, which allows you to perfectly adjust the displayed information to individual user preferences. Your equipment will take on a whole new character!Advanced pump design and equipment controlAt the heart of the Darkflash DV360S is a copper water block with high thermal conductivity, which effectively dissipates heat from the CPU, enabling stable performance and high overclocking (overclocking) values. Special surface treatment minimizes thermal resistance and increases cooling efficiency. The pump itself is equipped with ceramic bearings and a double structure resistant to corrosion and high temperatures, which significantly extends its life. In addition, the kit is equipped with a three-port PWM hub, which allows simultaneous connection and management of fans. Support for both 3-pin and 4-pin connectors ensures wide compatibility with various motherboards and cooling systems. The Darkflash DV360S is not only cooling, but also a striking tuning element for your PC.High-performance fans and a powerful heatsinkDarkflash DV360S is equipped with three 120-millimeter PWM fans that automatically adjust their speed according to the CPU temperature, oscillating between 800-1800 RPM. The design of the fans includes aerodynamic blades, which ensure strong airflow with minimal noise. In addition, the Rifle Bearing used features quiet operation and high durability. Each fan also has eight anti-vibration rubber pads each to eliminate noise and vibration during operation. The DV360S also features a 360-millimeter heatsink made of high-quality aluminum. The densely spaced fins efficiently dissipate heat, making the cooling ideal for those planning to overclock (overclock) the CPU. The standard mount for 120mm fans allows for easy removal and replacement when needed.Includedfan (ARGB PWM 120 mm) x3mounting screws for the fan x12heatsink mounting screws x12USB-C to USB 2.0 cablePWM hubfiber boarduser manual MainManufacturerDarkflashModelDV360SScreen resolution320 x 320 pixelsDimensions of the water block73.1 x 73.1 x 72.4 mmDimensions of heatsink395 x 120 x 27 mmPump length440 mmBlocking speed2700 ± 10% RPMRated voltage12VInitial voltage≧6VCurrent0.6APower consumption7.2WColorWhite FanDimensions120 x 120 x 25 mmRated voltage12VInitial voltage≧6VSpeed800~1800 ± 10% RPMCurrent0.65AAirflow64.05CFM ± 10%Air pressure1.85 ± 10% mm H2ONoise level30dBABearing typeHydrostatic SocketsIntelGA2011, 2011-V3, 2066, 1366, 115X, 1700AMDFM1, FM2, FM2+, AM2, AM2+, AM3, AM3+, AM4+, AM5
The Valkyrie V360 AIO pairs bold visual design with flagship performance. A high-speed, award-winning pump powers the system, while our radiator-cooling optimised fans deliver massive airflow and static pressure with near-silent precision. And with a vibrant 3.5" LCD screen front and center, your system’s performance finally looks as good as it runs. Patented high-speed pump for extreme thermal efficiency 2x Valkyrie S12 fans optimised for radiators 3.5" IPS LCD display with 60Hz refresh rate 5-year warranty
This CPU cooler from EKL, the company behind the Alpenföhn brand, is especially suitable for HTPCs or SFF builds thanks to its compact form factor. The 92 mm fan delivers a maximum airflow of 77.81 m³/h at up to 2,200 RPM, supporting a TDP of 65 W. With a height of only 55 mm, this cooler fits even the smallest PCs, whether it's an office PC, HTPC, or SFF build. The 92 mm fan features 4-pin PWM control and boasts a long lifespan of 30,000 hours. Additionally, the cooler impresses with a maximum noise level of just 25.7 dB(A) at full load.
Superb Heat Exchanger Design - The Valkyrie Vind DL125 features an array of 6 copper heat pipes and a flat copper coldplate for quick and effective heat dissipation Precise Aluminum Heatsink - Its precision-engineered aluminium fin array ensures minimum airflow resistance, allowing a high volume of cool air to flow through the heatsink easily High Performance Valkyrie U12 Fans - The powerful 120mm fans can achieve a maximum airflow (79CFM) with high static pressure (3,14mmH2O), while running at low noise levels (30 dBA) for formidable and silent performance AMD & INTEL Compatible - Easy installation with mounting brackets for Intel (LGA 1700, 1200, 1151, 1150, 1155, 1156) & AMD (AM5, AM4) sockets; thermal paste included Addressable RGB Lighting: A-RGB LEDs are integrated into the cooler frame and fan frames for completely customizable and unique look for your PC Dual Tower CPU Air Cooler General Information Dual-tower design with 100 aluminum fins Compatible with Intel (LGA 1150–2066) and AMD (AM4, AM5) 260W TDP rating ARGB lighting synced with motherboard software Cooling Performance 6 × 6mm high-performance composite heatpipes Heatpipe Direct Touch (HDT) base for better thermal transfer 150 × 137 × 158 mm overall heatsink dimensions Fans - Valkyrie U12 2× 120 × 120 × 25 mm fans Speed: 800 – 2150 RPM ±10% Airflow: 78 CFM Static Pressure: 3.14 mmH₂O Noise Level: up to 30.5 dB(A) Fluid Dynamic Bearing, 50,000h MTTF ARGB illumination
Superb Heat Exchanger Design - The Valkyrie Vind DL125 features an array of 6 copper heat pipes and a flat copper coldplate for quick and effective heat dissipation Precise Aluminum Heatsink - Its precision-engineered aluminium fin array ensures minimum airflow resistance, allowing a high volume of cool air to flow through the heatsink easily High Performance Valkyrie U12 Fans - The powerful 120mm fans can achieve a maximum airflow (79CFM) with high static pressure (3,14mmH2O), while running at low noise levels (30 dBA) for formidable and silent performance AMD & INTEL Compatible - Easy installation with mounting brackets for Intel (LGA 1700, 1200, 1151, 1150, 1155, 1156) & AMD (AM5, AM4) sockets; thermal paste included Addressable RGB Lighting: A-RGB LEDs are integrated into the cooler frame and fan frames for completely customizable and unique look for your PC Dual Tower CPU Air Cooler General Information Dual-tower design with 100 aluminum fins Compatible with Intel (LGA 1150–2066) and AMD (AM4, AM5) 260W TDP rating ARGB lighting synced with motherboard software Cooling Performance 6 × 6mm high-performance composite heatpipes Heatpipe Direct Touch (HDT) base for better thermal transfer 150 × 137 × 158 mm overall heatsink dimensions Fans - Valkyrie U12 2× 120 × 120 × 25 mm fans Speed: 800 – 2150 RPM ±10% Airflow: 78 CFM Static Pressure: 3.14 mmH₂O Noise Level: up to 30.5 dB(A) Fluid Dynamic Bearing, 50,000h MTTF ARGB illumination
Suurus:60 L x 60 W x 25 H mm tööpinge:4,5-13,8 V testitud:12V õhuvool:18 m3/h õhusurve:0,640 mm/H20 müratase:11,3 dBA kiirus:1600 RPM võimsustarve:0,48 W eestikeelne ülevaade:http://youtu.be/HnuOvu39nqk tootjalehel:http://www.blacknoise.com/en/products/it/13/Noiseblocker-NB_BlackSilentFan_60mm
Thermaltake Pacific HardTube 45° screw-on nozzle 16mm OD on G1/4 - Chrome is perfect to complete your cooling circuit. Equipped with a G1/4 thread and a chrome coating.
Dust can be a computer system’s worst enemy as it has the potential to lower cooling performance or cause damage when left overly accumulated. But most fan filters are a hassle to install so SilverStone created an easy to use FF123 fan filter.The FF123 has embedded magnet in its frame so it can be effortlessly attached to any steel chassis without tools. So for those looking for dust reduction for component longevity with increased cooling efficiency, the FF123 is an excellent buy.Technical detailsWhiteWeight & dimensionsWidth 120 mmDepth 1.5 mmHeight 120 mmWeight 13.6 g
