Optimised for Static Pressure During the development of the new P14 PWM, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM is particularly suitable for use on heatsinks and radiators. More Efficient Technology The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. Maximum Quietness, Minimum Vibration Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years. 200 to 1700 RPM regulated via PWM Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed. High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data: Performance Fan Speed: 200 - 1700 rpm Airflow: 72.8 CFM/ 123.76 m³/h Static Pressure: 2,40 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: PWM Connector: 4-Pin Connector Fan Bearing: Fluid Dynamic Bearing Electric Characteristics Typical Voltage: 12 V DC Starting Voltage: 3.9 V Current: 0.12 A Cable Lenght: 400 mm Size & Weight Lenght: 140 mm Width: 140 mm Height: 27 mm Weight: 194 g
Silber vernickeltes Compression Fitting von EK Water Blocks, für Röhren mit 16 mm OD, Kompatibel zu Röhren aus Acryl / PETG / Kupfer / Messing / Edelstahl, 6er Pack
Fan speed (max): 2000 Fan speed (min): 500 Air flow rates: 73.11 Number of fans: 1 Noise: 36 Dimensions: Radiator length 152 mm Radiator width 120 mm Radiator height 32 mm Pump length 66 mm Pump width 66 mm Pump height 43 mm Other features: Static pressure 2.93 InchH2O Rated voltage 12 VDC Material Plastic, Nylon, Copper, Rubber, Aluminium Noise level 21 - 36 dB Bearing type FDB(Fluid Dynamic Bearing) Lifetime 60 000 h Fan diameter 120 mm Illumination Yes Connectors 4-PIN, 3-PIN Illumination color RGB Backlight parts Pump Fan lifetime 60000 h
Set aus drei 120-mm-Gehäuselüftern, max. 2.000 U/min, 4-Pin-PWM-Anschluss, PST-Technologie, langlebiges Fluiddynamik-Lager, adressierbare RGB-Beleuchtung
Black twin-tower CPU cooler, 2x 140mm PWM fans with 700 to 1,800 RPM, seven copper heatpipes and max. 280W TDP, compatible with AMD and Intel CPUs.Socket compatibility：Intel LGA1200/115X/1700/2011, AMD AM4/AM5
The Bitspower Cyclops 360 ARGB AIO water cooler is a high-performance cooling solution for your CPU. It features a 360mm radiator and comes with three 120mm PWM fans for efficient heat dissipation. The cooler also has integrated RGB lighting and an infinity mirror for a stunning visual effect. With its advanced design and powerful cooling capabilities, this AIO cooler is perfect for gamers and PC enthusiasts.
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Double-ThreadedThis adapter has a ¼” external screw thread. This allows, for example, two sockets with ¼” internal threads to be connected. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Length: 22mm Diameter: 18mm Scope of Delivery: 1x Alphacool Eiszapfen double nippel rotatable G1/4 outer thread to G1/4 outer thread - deep black
This iCUE LINK 200 mm Cable is perfect for crafting seamless, angled connections. With its 90-degree slim angled design, this medium-length cable guarantees an impeccably neat and sleek result for your connectivity needs.
"Thermal Grizzly Kryonaut Extreme Thermal Paste 33,84 g / 9,0 ml Z10 Pink on suure jõudlusega termiline ühend, mis on mõeldud neile, kes otsivad maksimaalset soojusjuhtivust nõudlikes arvutikeskkondades. Spetsiaalselt kiirendusentusiastidele ja suure jõudlusega riistvara austajatele mõeldud pasta tagab protsessori ja GPU optimaalse soojuse hajutamise, suurendades seeläbi süsteemi stabiilsust ja jõudlust. See konkreetne mudel, Z10 Pink variant, ei paista välja mitte ainult oma unikaalse värviga, vaid pakub jätkuvalt erakordset kvaliteeti, mille poolest Thermal Grizzly on tuntud. 33,84 grammi kaaluv ja 9,0 milliliitri mahuga suure tihedusega koostis täidab mikroskoopilised tühimikud protsessori ja jahutuspinna vahel, tagades maksimaalse soojusülekande. See termoplast sobib ideaalselt edasijõudnud kasutajatele, kes soovivad oma arvutusvõimsuse piire ületada, ning seda on tänu sujuvale konsistentsile lihtne kasutada, mistõttu sobib see paljude arvutirakenduste jaoks. Olenemata sellest, kas ehitate uut süsteemi või uuendate olemasolevat, Thermal Grizzly Kryonaut Extreme tagab, et teie komponendid jäävad surve all jahedaks.
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This fitting can be used to connect 13/10mm tubing with a G1/4“ connection thread. The fitting is angled by 45° and is revolvable, allowing easy hose routing in the system. Technical specifications: Material: Brass, chromatizedColour: Chrome Dimensions:Length: 36mmWidth: D18mmHeight: 40mm Hose size compatibility : 13/10mm Extent of delivery:1 x Alphacool HF Screw connector 45° G1/4 outer thread on 13/10 revolvable - Chrome This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)
With the Alphacool Eiszapfen you connect your hardtubes at the perfect 90° angle. The hardtube is tightly screwed to the union nut, seals immediately and can be easily loosened with one hand. Technical Details Width: 38mm Length: 38 mm Material: brass Color: Deep Black
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: Rotatable L-ConnectorThis 90° angle adapter has a rotatable ¼” external screw thread on one side and a ¼” internal thread on the other side. This connector is mostly useful in cases where there is little space available and a special solution is needed. Technical Specifications: Material: Brass Colour:Chrome Dimensions: Length: 32mm Width: 18mm Hight: 18mm Scope of Delivery: 1x Alphacool Eiszapfen L-connector rotatable G1/4 outer thread to G1/4 inner thread - chrome
360-mm-Radiator mit 44 mm Dicke, Finnen und Kanäle aus Kupfer, exklusives Modding-Design, 5x G1/4-Anschlüsse, hochwertige Verarbeitung, geeignet für Custom-Loops
Temperatursensor im G1/4-Zoll-Format von aqua computer, mit sehr hoher Genauigkeit, unterstützt die aquabus-Schnittstelle, für die Controller aquaero 5 und aquaero 6
120-mm-Radiator mit 44 mm Dicke, Finnen und Kanäle aus Kupfer, exklusives Modding-Design, 5x G1/4-Zoll-Anschlüsse, hochwertige Verarbeitung, geeignet für Custom-Loops
