Jahutid ja lisad

Build your own AIO water cooling system. Alongside the different prefilled Eisbaer Aurora CPU AIO watercoolers that can be used "Out of the Box", the core of the Eisbaer Aurora is also available as a solo version. With it you can decide how you want to build your water cooling loop and which parts you want to use for it. By using the industry standard G1/4" ports, all fittings from the water cooling sector can be used. This gives you the ability to choose the hose thickness, colour, style, and liquid freely. The Eisbaer Aurora gives you full control. Pump and cooler The basis of the pump is the Alphacool DC-LT 2 Ceramic pump which is also available separately. The pump is powerful enough to operate a circuit consisting of a radiator, a CPU block, and a graphics card water cooler. It is incredibly quiet, almost inaudible. The cold plate is made of nickel-plated copper and offers excellent heat transfer. Due to the fine fin structure of the cooler bottom and the optimized water flow, the cooling performance is comparable to the best DIY water coolers on the market. No compromises have been made in terms of performance in favour of other features. Design and lighting The Eisbaer Aurora Solo is equipped with addressable digital RGB LEDs. The aRGB LEDs can be connected to any 3-pin 5V connector and controlled easily. The housing is decorated with a polar bear, through which the LEDs shine. Due to the extensive control possibilities of Digital RGB LEDs numerous effects can be displayed. Compatibility: Intel 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / TR4 / sTRX4 / AM5 Technical data pump housing L x W x H 66 x 66 x 69 mm Material reservoir Transparent Nylon Threads 2x G1/4” Connection Digital aRGB 3-Pin JST + 3-Pin 5V Quantity Digital aRGB LED 10 Technical data pump Speed 2600 RPM Voltage 12V DC Power consumption 4 W Maximum flow rate 75L/h Maximum head 0,95m Other technical data Net weight 223 g Max working temperature 60 °C Pressure tested 0,8 Bar

Socket compatibility: Intel LGA2066, LGA2011-0 & LGA2011-3 (Square ILM), LGA1700 (included since Q4 2021, older coolers require NM-i17xx-MP83), LGA1200, LGA1156, LGA1155, LGA1151, LGA1150 AMD AM4, AM5 Height (without fan): 158 mm Width (without fan): 154 mm Depth (without fan): 152 mm Weight (without fan): 1180 g Material: Copper (base and heat-pipes) aluminium (cooling fins) soldered joints nickel plating NSPR: 42 Max. TDP: see NSPR Fan compatibility: 120x120x25 Scope of delivery: NH-P1 heatsink SecuFirm2+™ multi-socket mounting system NT-H2 high-grade thermal compound NA-CW1 cleaning wipe NM-SD1 screwdriver Fan clips for optional 120mm fan Noctua Metal Case-Badge

SILENT WINGS PRO 4 140mm PWM Legendär leise, unvergleiche Performance und Features Silent Wings Pro 4 140mm PWM ist der fortschrittlichste, leistungsstärkste und vielseitigste Lüfter von be quiet! Optimierte Lüfterblätter für höchste Performance auf Radiatoren und Kühlkörper. Speed Switch ermöglicht den Wechsel der maximalen PWM-Drehzahl zwischen medium-speed, high-speed und ultra-high-speed (bis zu 2400 U/min) Geringer Abstand zwischen Rahmen und Lüfterblättern sowie trichterförmige Luftauslässe für maximalen Luftdruck Nahezu unhörbarer Betrieb bei gewöhnlichen Geschwindigkeiten 6-Pol-Lüftermotor und Fluid-Dynamic-Lager für einen vibrationsarmen und leisen Betrieb Individuelle Montageoptionen für den Einsatz auf Radiatoren und Kühlkörpern oder als Gehäuselüfter Elegantes Erscheinungsbild mit Hochglanz-Lüftersticker in edlem schwarz und hochwertigem, gesleevten PWM-Kabe 5 Jahre Herstellergarantie Technische Daten: Maße (mm) 140 Drehzahl @ 100% PWM / 12V (U/min) 2400 Air Flow @ 100% PWM / 12V (CFM / m3/h) 97.41 / 165.5 Luftdruck @ 100% PWM / 12V (mm H2O) 3.64 Beleuchtung - Lautstärke bei 100% PWM / 12V (dB(A)) 36.8 Farbauswahl Black Maße (L x B x H), (mm) 140 x 140 x 25 Lagertechnologie FDB Motortechnologie 6-pole fan motor Gewicht incl. Anschlusskabel (kg) 0.258 Push Pin Befestigung ✓ Schraubbefestigung ✓ Air Flow @ 100% PWM / 12V (CFM / m3/h) 97.41 / 165.5 Luftdruck @ 100% PWM / 12V (mm H2O) 3.64 Lautstärke bei 100% PWM / 12V (dB(A)) 36.8 Lebenserwartung @ 25 °C (Stunden) 300,000

be quiet! SILENT WINGS 4 | 140mm PWM. Tüüp: Ventilaator, Ventilaatori läbimõõt: 14 cm, Pöörlemiskiirus (max): 1100 RPM, Müratase (suur kiirus): 13,6 dB, Maksimaalne õhuvool: 51,3 cfm, Õhuvool: 87,16 m³/h, Maksimaalne õhusurve: ...

The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance. Connection options There are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1 The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2 The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!) The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design. Brilliant illumination Six addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility: - Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 TI Founders Edition with Backplate (article number: 13056) Technical data L x W x H 220,5 x 121,4 x 13,3 mm Material backplate copper, nickel-plated Material cooler acrylic Threads Water cooling 2x G1/4" | 2x 5/3mm tube connection Illumination 6x digital addressable RGB LEDs Power connector digital aRGB LEDs 3-pin JST (male & female switch) Power digital aRGB LEDs 5V Maximum working temperature 60 °C Pressure tested 0,8 Bar Weight 753 g

The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers as well as Alphacool's Eiswolf 2 GPU AIOs (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance. Connection options There are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1 The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2 The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!) The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design. Brilliant illumination Six addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility: - Alphacool Eiswolf 2 AIO - 360mm RTX 3080/3090 Ventus with backplate (article number: 14420) - Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 Ventus with backplate (article number: 11937) Technical data L x W x H 260 x 107,25 x 13,3 mm Material backplate copper, nickel-plated Material cooler acrylic Threads Water cooling 2x G1/4" | 2x 5/3mm tube connection Illumination 6x digital addressable RGB LEDs Power connector digital aRGB LEDs 3-pin JST (male & female switch) Power digital aRGB LEDs 5V Maximum working temperature 60 °C Pressure tested 0,8 Bar Weight 718 g

The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance. Connection options There are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1 The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2 The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!) The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design. Brilliant illumination Six addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility: - Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 TI HOF with backplate (article number: 11967) Technical data L x W x H 295 x 125,25 x 13,3 mm Material backplate copper, nickel-plated Material cooler acrylic Threads Water cooling 2x G1/4" | 2x 5/3mm tube connection Illumination 6x digital addressable RGB LEDs Power connector digital aRGB LEDs 3-pin JST (male & female switch) Power digital aRGB LEDs 5V Maximum working temperature 60 °C Pressure tested 0,8 Bar Weight 1013 g

The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers as well as Alphacool's Eiswolf 2 GPU AIOs (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance. Connection options There are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1 The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2 The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!) The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design. Brilliant illumination Six addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility: - Alphacool Eiswolf 2 AIO - 360mm RTX 3080/3090 ROG Strix with backplate (article number: 14418) - Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 ROG Strix with backplate (article number: 11940) Technical data L x W x H 266,6 x 129 x 13,3 mm Material backplate copper, nickel-plated Material cooler acrylic Threads Water cooling 2x G1/4" | 2x 5/3mm tube connection Illumination 6x digital addressable RGB LEDs Power connector digital aRGB LEDs 3-pin JST (male & female switch) Power digital aRGB LEDs 5V Maximum working temperature 60 °C Pressure tested 0,8 Bar Weight 925 g

The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers as well as Alphacool's Eiswolf 2 GPU AIOs (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance. Connection options There are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1 The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2 The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!) The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design. Brilliant illumination Six addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility: - Alphacool Eiswolf 2 AIO - 360mm RTX 3080/3090 Aorus Master/Xtreme with backplate (article number: 11974) - Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Aorus Master/Xtreme with backplate (article number: 11952) Technical data L x W x H 269,27 x 120,74 x 13,3 mm Material backplate copper, nickel-plated Material cooler acrylic Threads Water cooling 2x G1/4" | 2x 5/3mm tube connection Illumination 6x digital addressable RGB LEDs Power connector digital aRGB LEDs 3-pin JST (male & female switch) Power digital aRGB LEDs 5V Maximum working temperature 60 °C Pressure tested 0,8 Bar Weight 844 g

The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers as well as Alphacool's Eiswolf 2 GPU AIOs (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance. Connection options There are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1 The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2 The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!) The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design. Brilliant illumination Six addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility: - Alphacool Eiswolf 2 AIO - 360mm RTX 3080/3090 FTW3 with backplate (article number: 14414) - Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 FTW3 with backplate (article number: 11943) Technical data L x W x H 289,90 x 125,65 x 13,3 mm Material backplate copper, nickel-plated Material cooler acrylic Threads Water cooling 2x G1/4" | 2x 5/3mm tube connection Illumination 6x digital addressable RGB LEDs Power connector digital aRGB LEDs 3-pin JST (male & female switch) Power digital aRGB LEDs 5V Maximum working temperature 60 °C Pressure tested 0,8 Bar Weight 1032 g

TThe Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers as well as Alphacool's Eiswolf 2 GPU AIOs (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance. Connection options There are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1 The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2 The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!) The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design. Brilliant illumination Six addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility: - Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 Gaming/Eagle with backplate (article number: 11942) - Alphacool Eiswolf 2 AIO - 360mm RTX 3080/3090 Gaming/Eagle with backplate (article number: 14416) Technical data L x W x H 233,5 x 97 x 13,3 mm Material backplate copper, nickel-plated Material cooler acrylic Threads Water cooling 2x G1/4" | 2x 5/3mm tube connection Illumination 6x digital addressable RGB LEDs Power connector digital aRGB LEDs 3-pin JST (male & female switch) Power digital aRGB LEDs 5V Maximum working temperature 60 °C Pressure tested 0,8 Bar Weight 662 g

The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance. Connection options There are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1 The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2 The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!) The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design. Brilliant illumination Six addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility: - Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 Founders Edition with backplate (article number: 11941) - Alphacool Eiswolf 2 AIO 360mm RTX 3090 Founders Edition with backplate (article number: 14463) Technical data L x W x H 206,54 x 120,71 x 13,3 mm Material backplate copper, nickel-plated Material cooler acrylic Threads Water cooling 2x G1/4" | 2x 5/3mm tube connection Illumination 6x digital addressable RGB LEDs Power connector digital aRGB LEDs 3-pin JST (male & female switch) Power digital aRGB LEDs 5V Maximum working temperature 60 °C Pressure tested 0,8 Bar Weight 704 g

The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic/ES Acetal GPX-N GPU custom water coolers as well as Alphacool's Eiswolf 2 GPU AIOs (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance. Connection options There are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1 The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2 The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!) The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design. Brilliant illumination Six addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility: - Alphacool Eiswolf 2 AIO - 360mm RTX 3090/3080 with backplate (Reference) (article number: 11931) - Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 with backplate (Reference) (article number: 11930) - Alphacool Eisblock Aurora Acetal GPX-N RTX 3090/3080 with backplate (Reference) (article number: 10667) Technical data L x W x H 224,85 x 96,90 x 13,3 mm Material backplate copper, nickel-plated Material cooler acrylic Threads Water cooling 2x G1/4" | 2x 5/3mm tube connection Illumination 6x digital addressable RGB LEDs Power connector digital aRGB LEDs 3-pin JST (male & female switch) Power digital aRGB LEDs 5V Maximum working temperature 60 °C Pressure tested 0,8 Bar Weight 645 g

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump! The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical data cooler and pump L x W x H 132 x 259 x 46 mm Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Technical radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material fins, chambers & channels copper Material threads brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data fans Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Max working temperature 60 °C Note: - This cooler includes a backplate - Attention: The use of the NVLink is not possible with this AIO! Compatibility list: Overview for Nvidia cards Graphic card configurator: Find the right cooler for you Compatibility list: RTX 3080 - MSI GeForce RTX 3080 Ventus 3X 10G OC, 10GB GDDR6X, HDMI, 3x DP RTX 3080 Ti - MSI GeForce RTX 3080 Ti Ventus 3X 12G OC, 12GB GDDR6X, HDMI, 3x DP RTX 3090 - MSI GeForce RTX 3090 Ventus 3X 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 3090 Ventus 3X 24G OC, 24GB GDDR6X, HDMI, 3x DP Download Datasheet PDF: Alphacool Eiswolf 2 AIO 360mm RTX 3080/3090 Ventus with Backplate Download Manual (1/2) PDF: Alphacool Eiswolf 2 AIO 360mm RTX 3080/3090 Ventus with Backplate Download Manual (2/2) PDF: Alphacool Eiswolf 2 AIO 360mm RTX 3080/3090 Ventus with Backplate Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical data cooler and pump L x W x H 122 x 233,5 x 46 mm Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Technical radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material fins, chambers & channels copper Material threads brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data fans Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Max working temperature 60 °C Note: - Attention: The use of the NVLink is not possible with this AIO! Compatibility list: RTX 3080 TI Gigabyte GeForce RTX 3080 Ti Eagle 12G, 12GB GDDR6X, 2x HDMI, 3x DP Gigabyte GeForce RTX 3080 Ti Eagle OC 12G, 12GB GDDR6X, 2x HDMI, 3x DP Gigabyte GeForce RTX 3080 Ti Vision OC 12G, 12GB GDDR6X, 2x HDMI, 3x DP Gigabyte Geforce RTX 3080 Ti Gaming OC RTX 3080 Gigabyte GeForce RTX 3080 Eagle OC 10G, 10GB GDDR6X, 2x HDMI, 3x DP Gigabyte GeForce RTX 3080 Gaming OC 10G, 10GB GDDR6X, 2x HDMI, 3x DP Gigabyte GeForce RTX 3080 Turbo 10G, 10GB GDDR6X, 2x HDMI, 2x DP Gigabyte GeForce RTX 3080 Vision OC 10G, 10GB GDDR6X, 2x HDMI, 3x DP RTX 3090 Gigabyte GeForce RTX 3090 Eagle OC 24G, 24GB GDDR6X, 2x HDMI, 3x DP Gigabyte GeForce RTX 3090 Gaming OC 24G, 24GB GDDR6X, 2x HDMI, 3x DP Gigabyte GeForce RTX 3090 Turbo 24G, 24GB GDDR6X, 2x HDMI, 2x DP Gigabyte GeForce RTX 3090 Vision OC 24G, 24GB GDDR6X, 2x HDMI, 3x DP Downloads: Datasheet PDF | Manual(1) PDF | Manual(2) PDF | Nvidia List of Compatibility PDF Links: Graphics Card Configurator Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump! The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical data cooler and pump L x W x H 162,5 x 266 x 46 mm Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Technical radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material fins, chambers & channels copper Material threads brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data fans Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Max working temperature 60 °C Note: - This cooler includes a backplate - Attention: The use of the NVLink is not possible with this AIO! Compatibility list: Overview for Nvidia cards Graphic card configurator: Find the right cooler for you Compatibility list: RTX 3080 - ASUS ROG Strix GeForce RTX 3080, 10GB GDDR6X, 2x HDMI, 3x DP - ASUS ROG Strix GeForce RTX 3080 OC, 10GB GDDR6X, 2x HDMI, 3x DP RTX 3080 Ti - ASUS GeForce RTX 3080 Ti STRIX LC Liquid Cooled, 12GB GDDR6X, 2x HDMI, 3x DP - ASUS ROG Strix GeForce RTX 3080 Ti Gaming, 12GB GDDR6X, 2x HDMI, 3x DP - ASUS ROG Strix GeForce RTX 3080 Ti Gaming OC, 12GB GDDR6X, 2x HDMI, 3x DP RTX 3090 - ASUS ROG Strix GeForce RTX 3090 OC, 24GB GDDR6X, 2x HDMI, 3x DP - ASUS ROG Strix GeForce RTX 3090, 24GB GDDR6X, 2x HDMI, 3x DP Download Datasheet PDF: Alphacool Eiswolf 2 AIO 360mm RTX 3080/3090 ROG Strix with Backplate Download Manual (1/2) PDF: Alphacool Eiswolf 2 AIO 360mm RTX 3080/3090 ROG Strix with Backplate Download Manual (2/2) PDF: Alphacool Eiswolf 2 AIO 360mm RTX 3080/3090 ROG Strix with Backplate Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical data cooler and pump L x W x H 269,5 x 146 x 46 mm Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Technical radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material fins, chambers & channels copper Material threads brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data fans Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Max working temperature 60 °C Note: - Attention: The use of the NVLink is not possible with this AIO! Compatibility list: - Gigabyte Aorus GeForce RTX 3080 Ti Xtreme 12GB - Gigabyte Aorus GeForce RTX 3080 Ti Master 12GB - Gigabyte Aorus GeForce RTX 3080 Master 10G, 10GB GDDR6X, 3x HDMI, 3x DP - Gigabyte Aorus GeForce RTX 3080 Xtreme 10G, 10GB GDDR6X, 3x HDMI, 3x DP - Gigabyte Aorus GeForce RTX 3090 Master 24G, 24GB GDDR6X, 3x HDMI, 3x DP - Gigabyte Aorus GeForce RTX 3090 Xtreme 24G, 24GB GDDR6X, 3x HDMI, 3x DP Downloads: Datasheet PDF | Manual(1) PDF | Manual(2) PDF | Nvidia List of Compatibility PDF Links: Graphics Card Configurator Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H 2 O and offers a max. air flow of 119.8m³/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 290 x 151 x 46 mm Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H 2 O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Note: - Attention: The use of the NVLink is not possible with this AIO! Compatibility list: - EVGA GeForce RTX 3080 Ti FTW3 Ultra, 12GB GDDR6XRTX 3080 - EVGA GeForce RTX 3080 Ti FTW3 Ultra Hybrid Gaming (12G-P5-3968-KR) - EVGA GeForce RTX 3080 FTW3 Ultra Gaming, (10G-P5-3897-KR) - EVGA GeForce RTX 3080 FTW3 Gaming, (10G-P5-3895-KR) - EVGA GeForce RTX 3090 FTW3 Ultra Gaming, (24G-P5-3987-KR) - EVGA GeForce RTX 3090 FTW3 Gaming, (24G-P5-3985-KR) Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.

Compatibility: - Alphacool Eisblock Aurora Acryl GPX-N RTX 3090/3080 Suprim X with backplate (article number: 11938) Technical data L x W x H: 295 x 127,25 x 13,3 mm Material backplate: copper, nickel-plated Material cooler: acrylic Threads Water cooling: 2x G1/4" | 2x 5/3mm tube connection Illumination: 6x digital addressable RGB LEDs Power connector: digital aRGB LEDs 3-pin JST (male & female switch) Power: digital aRGB LEDs 5V Maximum working temperature: 60 °C Pressure tested: 0,8 Bar Weight: 1054 g

The Alphacool Aurora Acryl GPX-N RTX 3080/3090 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 17 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Plexi GPX Eisblock. More Performance! During the development of the EIsblock Aurora GPX-N RTX 3080/3090 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3080/3090 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3080/3090 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3080/3090 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3080/3090 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3080/3090 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data cooler L x W x H 295 x 152 x 25 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Maximum working temperature 60 °C Illumination Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Technical data backplate L x W x H 295 x 125,75 x 6 mm Material aluminium Color black Compatibility: RTX 3080 TI MSI GeForce RTX 3080 Ti Suprim X MSI GeForce RTX 3080 Ti Gaming X Trio 12G RTX 3080 MSI GeForce RTX 3080 Gaming X Trio 10G, 10GB GDDR6X, HDMI, 3x DP MSI GeForce RTX 3080 Gaming Z Trio 10G, 10GB GDDR6X, HDMI, 3x DP (V389-045R) MSI GeForce RTX 3080 Gaming Z Trio 12G LHR, 12GB GDDR6X, HDMI, 3x DP (V389-402R) MSI GeForce RTX 3080 Suprim X 10G, 10GB GDDR6X, HDMI, 3x DP MSI GeForce RTX 3080 Suprim X 12G LHR, 12GB GDDR6X, HDMI, 3x DP RTX 3090 MSI GeForce RTX 3090 Gaming X Trio, 24GB GDDR6X, HDMI, 3x DP MSI GeForce RTX 3090 Suprim X 24G, 24GB GDDR6X, HDMI, 3x DP

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Technical data cooler L x W x H 266 x 153 x 24 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Maximum working temperature 60 °C Illumination 13x Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Technical data backplate L x W x H 266 x 128 x 6 mm Material aluminium Color black Compatibility: MSI GeForce RTX 3090 Ti Suprim X 24G, 24GB GDDR6X, HDMI, 3x DP MSI GeForce RTX 3090 Ti Gaming X Trio 24G, 24GB GDDR6X, HDMI, 3x DP MSI GeForce RTX 3090 Ti Gaming Trio 24G, 24GB GDDR6X, HDMI, 3x DP MSI GeForce RTX 3090 Ti Suprim 24G, 24GB GDDR6X, HDMI, 3x DP

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 295 x 152 x 46mm Material cooler bottom Nickel plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95m Maximum flow rate 75 L/h Voltage 12V DC Power consumption 4W MTBF 50.000 h Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25mm Net weight 187g Max working temperature 60°C Compatibility: RTX 3080 TI MSI GeForce RTX 3080 Ti Suprim X MSI GeForce RTX 3080 Ti Gaming X Trio 12G RTX 3080 MSI GeForce RTX 3080 Gaming X Trio 10G, 10GB GDDR6X, HDMI, 3x DP MSI GeForce RTX 3080 Gaming Z Trio 10G, 10GB GDDR6X, HDMI, 3x DP (V389-045R) MSI GeForce RTX 3080 Gaming Z Trio 12G LHR, 12GB GDDR6X, HDMI, 3x DP (V389-402R) MSI GeForce RTX 3080 Suprim X 10G, 10GB GDDR6X, HDMI, 3x DP MSI GeForce RTX 3080 Suprim X 12G LHR, 12GB GDDR6X, HDMI, 3x DP RTX 3090 MSI GeForce RTX 3090 Gaming X Trio, 24GB GDDR6X, HDMI, 3x DP MSI GeForce RTX 3090 Suprim X 24G, 24GB GDDR6X, HDMI, 3x DP Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.

The Alphacool ES GPX Copper/Carbon water cooler with backplate was developed for the Alphacool Enterprise Series. Due to the positioning of the connections, the hosing of the cooler in the server rack is significantly simplified. The top of the cooler is made of carbon. This makes the water cooler lighter compared to Alphacool's Eisblocks with acetal or acrylic tops. Thanks to the compact design, only 1 slot is needed to mount the cooler in the server rack instead of 1.5 slots as before. This additional space saving is one more argument for using the ES GPX Copper/Carbon graphics card water cooler. More performance! Alphacool manages to position the cooler as close as possible to the components to be cooled. For this purpose, the heat conducting pads used are reduced to a thickness of 1mm. The maximum possible reduction in the thickness of the copper block and the optimization of the water flow inside the cooler allow all important components such as GPU, voltage converters and VRAMs to be cooled by water much better and more effectively. All of this provides a significant increase in cooling performance. Connections on the back? In order to save space in the width and height during installation, the water input and output have been moved to the back of the cooling block. This positioning of the connections makes hosing much easier. It enables easy integration of the GPU cooler into the water circuit even in the tightest server housings. Copper or aluminum? Alphacool uses only copper for all water-bearing parts. Copper has almost twice the thermal conductivity of aluminum and is therefore clearly the better choice of material for water cooling. The nickel-plated copper base is highly resistant to acid, which means that chipping of the nickel plating can be ruled out. Thermal paste & thermal pads The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive thermal paste is particularly well suited for high contact pressures, but can still be perfectly applied due to its viscosity of 850000 TF. For the thermal pads, Alphacool uses soft pads that fit perfectly to the components to be cooled and are very durable. The 2mm and 3mm thick pads have a thermal conductivity of 3 W/mk. The 1mm thick pads can dissipate 7 W/mk of heat. Discreet appearance The matte carbon finish gives the cooler a noble appearance. This makes it additionally interesting for private users who want to do without aRGB lighting. Compatibility: - AMD Radeon RX 6800 Reference Design - AMD Radeon RX 6800 XT Reference Design - AMD Radeon RX 6900 XT Reference Design - AMD Radeon RX 6950 XT Reference Design Technical data cooler L x W x H 267,63 x 104,8 x 22,35mm Material cooler Nickle-plated copper Material cooler top carbon Threads 2 x G1/4" Thickness cooling fins 0,6mm Maximum working temperature 60 °C Pressure tested 0,8 Bar Technical data backplate L x W x H 267,63 x 104,8 x 6mm Material aluminium Color black

The Alphacool Aurora Acryl GPX-A 6800XT/6900XT Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-A 6800XT/6900XT graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-A 6800XT/6900XT cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-A 6800XT/6900XT Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-A 6800XT/6900XT Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-A 6800XT/6900XT also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-A 6800XT/6900XT Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate Technical data: L x W x B: 260 x 142,5 x 24,5 mm Material cooler: Nickle plated copper Material top: Acryl Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Power connector Digital RGB: 3-Pin 5V (0,5A) Graphics Card Configurator: Click here! List of Compatibility: AMD graphic cards Compatibility list: - Sapphire Nitro+ Radeon RX 6800 XT SE, 16GB GDDR6, HDMI, 2x DP, USB-C (11304-01-20G) - Sapphire Nitro+ Radeon RX 6800 XT, 16GB GDDR6, HDMI, 3x DP (11304-02-20G) - Sapphire Nitro+ Radeon RX 6900 XT, 16GB GDDR6, HDMI, 3x DP (11308-01-20G) Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Nitro+ mit Backplate Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Nitro+ mit Backplate

The Alphacool Aurora Acetal GPX-A 6800/6900(XT) Eisblock combines style with performance. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acetal GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-A 6800/6900(XT) graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-A 6800/6900(XT) Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-A 6800/6900(XT) also relies on the new patented stop fittings, which sit flush with the surface of the terminal. On the front of the terminal you can see the corresponding names of the compatible graphic card types. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-A 6800/6900(XT) Acetal is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate Technical data: L x W x B: 130 x 262,5 x 24,5 mm Material cooler: Nickle plated copper Material top: Acetal Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Graphics Card Configurator: Click here! List of Compatibility: AMD graphic cards Compatibility list: - AMD Radeon 6800 Reference Design - AMD Radeon 6800 XT Reference Design - AMD Radeon 6900 XT Reference Design - AMD Radeon 6950 XT Reference Design More compatible models will follow in this list for this cooler. We are currently checking other PCB designs from various manufacturers! Download manual PDF: Alphacool Eisblock Aurora Acetal GPX-A Radeon RX 6800/XT/6900 Reference with Backplate Download data sheet PDF: Alphacool Eisblock Aurora Acetal GPX-A Radeon RX 6800/XT/6900 Reference with Backplate

The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility: - Sapphire Toxic Radeon RX 6900 XT Limited Edition, 16GB GDDR6, HDMI, 3x DP - Sapphire Toxic Radeon RX 6900 XT Extreme Edition, 16GB GDDR6, HDMI, 3x DP - Sapphire Toxic Radeon RX 6900 XT Air Cooled, 16GB GDDR6, HDMI, 3x DP - Sapphire Nitro+ Radeon RX 6900 XT SE, 16GB GDDR6, HDMI, 3x DP - Sapphire Nitro+ Radeon RX 6950 XT, 16GB GDDR6, HDMI, 3x DP - Sapphire Nitro+ Radeon RX 6950 XT Pure, 16GB GDDR6, HDMI, 3x DP - Sapphire Toxic Radeon RX 6950 XT Limited Edition, 16GB GDDR6, HDMI, 3x DP Technical data cooler L x W x H 259 x 144,50 x 25,4mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Technical data backplate L x W x H 259 x 120 x 6mm Material aluminium Color black

The Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data cooler L x W x H 281,5 x 130,5 x 24,5 mm Material cooler Nickle-plated copper Material cooler top POM clear Threads 4 x G1/4“ Thickness cooling fins 0,6 mm Illumination Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V x Technical data backplate L x W x H 281,5 x 106 x 6 mm Material Aluminium Color Black Compatibility list: - Gigabyte Radeon RX 6800 XT Gaming OC 16G (GV-R68XTGAMING OC-16GD) - Gigabyte Radeon RX 6900 XT Gaming OC 16G (GV-R69XTGAMING OC-16GD) - Gigabyte Radeon RX 6950 XT Gaming OC 16G (GV-R695XTGAMING OC-16GD) Downloads: Datasheet PDF | Manual PDF | AMD List of Compatibility PDF Links: Graphics Card Configurator

be quiet! SILENT WINGS 4 | 140mm PWM. Tüüp: Ventilaator, Ventilaatori läbimõõt: 14 cm, Pöörlemiskiirus (max): 1900 RPM, Müratase (suur kiirus): 29,3 dB, Maksimaalne õhuvool: 78,4 cfm, Õhuvool: 133,2 m³/h, Maksimaalne õhusurve: ...

Paper/Pasteboard: 1387.00 g Embeeded battery: No Gross depth (mm): 140.00 mm Gross height (mm): 40.00 mm Gross weight: 0.28 kg Gross width (mm): 240.00 mm Net weight: 0.18 kg Packing quantity: 1.00 pc(s) Tare weight (kg): 0.10 kg Volume (m3): 0.00 m³ Producer product name: Prisma Digital RGB Square fan 140mm Plastic (No PET): 27.00 g WEEE tax: No

Silent Wings 4 120mm combines all features of a virtually inaudible with an extremely performant fan for the most demanding applications. Optimized fan blades for the highest performance. Small tip clearance and a fan frame with funnel-shaped air outlets for extremely high air pressure. Virtually inaudible operation at regular speed. 6-pole fan motor and fluid-dynamic bearing for less vibration and very smooth operations. Anti-vibration mounting with push pins and screwed installation option. Super-long lifespan of up to 300,000h. Elegant look with high-grade fan sticker in an all-black design.

Silent Wings 4 120mm PWM high-speed combines all features of a virtually inaudible with an extremely performant fan for the most demanding applications. Optimized fan blades for the highest performance on radiators and heat sinks. Small tip clearance and a fan frame with funnel-shaped air outlets for extremely high air pressure. Very silent operation even at maximum speed. 6-pole fan motor and fluid-dynamic bearing for less vibration and very smooth operations. Anti-vibration mounting with push pins and screwed installation option. Super-long lifespan of up to 300,000h. Elegant look with high-grade fan sticker in an all-black design.

CASE FAN 120MM ARGB/TUF GAMING TF120 ARGB ASUS

Phobya's innovative new shroud does not only improve cooling performance, it also offers a whole array of new design possibilities for your system! Cooling performance: The shroud increases the cooling performance of your fan/ radiator combination. Mounted between fan and radiator it allows a more even distribution of the Airflow, hence using the whole cooling surface of the radiator. If a fan is mounted on a radiator directly the fan motor creates a dead-spot which leaves some of the radiator's surface unused, reducing the possible cooling performance. Multiple shrouds may also be used on top of each other using longer mounting screws to increase cooling performance even more. Appearance: The appearance of a PC grows more and more important besides the performance of the system. Phobya has also considered this factor and has made these shrouds from Plexi. If you are using LED fans this allows an interesting and unique effect which will make your system even more of an eyecatcher. Should the luminance from the fan not suffice it is also possible to insert 5mm LEDs in the side of the shroud, bringing the before optically dead space between fan and radiator to life! Technical specifications: Material: Plexi Colour: Transparent Designed for: 120mm fans Hole size: 5mm Dimensions (LxWxH): 120 x 120 x 20mm Weight: 60g LED holes: 8x5mm Extent of delivery: 1x Phobya 120x120x20mm shroud Plexi This product has been tested for you: Dexgo Xtremehardware (IT) Coolingtechnique (IT) Awardfabrik Xpert-OC-Team Hardwareluxx (Userreview) Bit-Tech (engl) (Userreview) Octeamdenmark (dk) Technic3d mod-your-case

Zum Einsatz von 120mm Lüftern an 70/80/92mm Befestigungslöchern

Arctic Liquid Freezer II 280 A-RGB

The HEATKILLER® IV PRO for Intel Xeon is a high-end cooler for processors with socket 3647. The cooler has been completely redeveloped and optimally tailored to the requirements of this high-performance platform. The base plate of the HEATKILLER® IV PRO for Intel Xeon covers the entire heat spreader of a Xeon processor and can thus absorb the waste heat that occurs. The cooling geometry is extremely large at 48x40mm. The flow is perfectly optimized for the Xeon architecture and thus achieves outstanding cooling properties. Thanks to the large-volume and rounded channels, the flow resistance is also extremely low. The cooler has 5 full G1 / 4 " connections and can thus be integrated into a wide variety of circuits and systems. For installation in tower systems, there are inlet and outlet ports on the top of the cooler, so that it can be connected like a classic CPU cooler. Thanks to the low height, the cooler can also be used in 1U server systems without restriction: an inlet and two optional outlets on the front of the cooler enable extremely compact and space-saving installation. Thanks to its modular structure, the top can also be rotated 180 degrees in the mounting frame, so that the orientation of the inlet can be chosen variably. Thanks to the low flow resistance, the cooler is also ideally suited for multi-CPU systems. The assembly takes place according to the specifications of the CPU manufacturer. This guarantees optimal contact pressure. Compatibility: Intel XEON socket 3647 Technical specifications: Material upper part: POM Base plate material: copper - nickel-plated Material brackets: stainless steel Material mounting accessories: brass - nickel-plated Dimensions cooler (L x W x H): 86 x 59 x 25 mm SquareILM bracket dimensions (L x W): 90.5 x 90.5 mm Weight: 350g Seals: NBR 70 Connection thread: 5x G ¼ inch (2x IN, 3x OUT) Distance between the connection threads (top): 25mm Distance between the connection threads (side): 26mm Scope of delivery: HEATKILLER® IV PRO for Intel Xeon (Square ILM) Mounting material assembly Instructions

The HEATKILLER® IV PRO for Intel Xeon is a high-end cooler for processors with socket 3647. The cooler has been completely redeveloped and optimally tailored to the requirements of this high-performance platform. The base plate of the HEATKILLER® IV PRO for Intel Xeon covers the entire heat spreader of a Xeon processor and can thus absorb the waste heat that occurs. The cooling geometry is extremely large at 48x40mm. The flow is perfectly optimized for the Xeon architecture and thus achieves outstanding cooling properties. Thanks to the large-volume and rounded channels, the flow resistance is also extremely low. The cooler has 5 full G1 / 4 " connections and can thus be integrated into a wide variety of circuits and systems. For installation in tower systems, there are inlet and outlet ports on the top of the cooler, so that it can be connected like a classic CPU cooler. Thanks to the low height, the cooler can also be used in 1U server systems without restriction: an inlet and two optional outlets on the front of the cooler enable extremely compact and space-saving installation. Thanks to its modular structure, the top can also be rotated 180 degrees in the mounting frame, so that the orientation of the inlet can be chosen variably. Thanks to the low flow resistance, the cooler is also ideally suited for multi-CPU systems. The assembly takes place according to the specifications of the CPU manufacturer. This guarantees optimal contact pressure. Compatibility: Intel XEON socket 3647 Technical specifications: Material upper part: POM Base plate material: copper - nickel-plated Material brackets: stainless steel Material mounting accessories: brass - nickel-plated Dimensions cooler (L x W x H): 86 x 59 x 25 mm Dimensions of bracket Narrow ILM (L x W): 107 x 85 mm Weight: 350g Seals: NBR 70 Connection thread: 5x G ¼ inch (2x IN, 3x OUT) Distance between the connection threads (top): 25mm Distance between the connection threads (side): 26mm Scope of delivery: HEATKILLER® IV PRO for Intel Xeon (Narrow ILM) Mounting material assembly Instructions

LGA1700 tugi!