 Clatronic HL 3763 Hoonesisene Must, Valge 2000 W Elektriline soojapuhur Clatronic keraamiline soojapuhur Clatronic HL3763, must | Laos | 11 | 43,76 € | Vaata | |
 Alphacool Core Ocean T38 AIO 420mm (13054) With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2000 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2000 rpm, it provides an air flow of 92.3 CFM, together with a high static pressure of 2.53mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 460 x 140 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 20 Fan size 140mm Fan slots 3 one-sided / 6 double-sided Color black Technical data fans L x W x H 140 x 140 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.26 (Max. 0.3) A Rated Power 3.12 (Max. 3.6) W Rated Speed 0 - 2000rpm/min (±10%) Max. Air Flow 92.3CFM Max.Static Pressure 2.53mm-H2O Noise level (rated voltage, mute room, distance 1m) 34.3 (Max. 36) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm | 6 | 87,45 € | Vaata | ||
 Alphacool Core Ocean T38 AIO 280mm (13053) With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2000 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2000 rpm, it provides an air flow of 92.3 CFM, together with a high static pressure of 2.53mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 315 x 140 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 20 Fan size 140mm Fan slots 2 one-sided / 4 double-sided Color black Technical data fans L x W x H 140 x 140 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.26 (Max. 0.3) A Rated Power 3.12 (Max. 3.6) W Rated Speed 0 - 2000rpm/min (±10%) Max. Air Flow 92.3CFM Max.Static Pressure 2.53mm-H2O Noise level (rated voltage, mute room, distance 1m) 34.3 (Max. 36) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm | 5 | 74,80 € | Vaata | ||
 Alphacool CPU Cooler Core Ocean T38 360mm AIO (13052) With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 397 x 120 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 19 Fan size 120mm Fan slots 3 one-sided / 6 double-sided Color black Technical data fans L x W x H 120 x 120 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.23 (Max. 0.4) A Rated Power 2.76 (Max. 4.8) W Rated Speed 0 - 2500rpm/min (±10%) Max. Air Flow 62.8CFM Max.Static Pressure 2.13mm-H2O Noise level (rated voltage, mute room, distance 1m) 33.0 (Max. 34.3) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm | 7 | 73,85 € | Vaata | ||
 Alphacool Core Ocean T38 AIO 240mm (13051) With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 279 x 120 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 19 Fan size 120mm Fan slots 2 one-sided / 4 double-sided Color black Technical data fans L x W x H 120 x 120 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.23 (Max. 0.4) A Rated Power 2.76 (Max. 4.8) W Rated Speed 0 - 2500rpm/min (±10%) Max. Air Flow 62.8CFM Max.Static Pressure 2.13mm-H2O Noise level (rated voltage, mute room, distance 1m) 33.0 (Max. 34.3) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm | 6 | 63,70 € | Vaata | ||
 Alphacool Core Ocean T38 AIO 120mm (13050) Tootekood: 13050 Jahutid ja lisad With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 153 x 120 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 19 Fan size 120mm Fan slots 1 one-sided / 2 double-sided Color black Technical data fans L x W x H 120 x 120 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.23 (Max. 0.4) A Rated Power 2.76 (Max. 4.8) W Rated Speed 0 - 2500rpm/min (±10%) Max. Air Flow 62.8CFM Max.Static Pressure 2.13mm-H2O Noise level (rated voltage, mute room, distance 1m) 33.0 (Max. 34.3) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 350mm | 1 | 52,90 € | Vaata | ||
 MSI CPU Cooler MAG CORELIQUID M360 MSI MAG CORELIQUID P360. Tüüp: Kõik-ühes vedelikujahuti, Maksimaalne õhuvool: 78,73 cfm. Laius: 67,3 mm, Sügavus: 60 mm, Kõrgus: 55,9 mm. Toote värv: Must | 1-3 tp | 44 | 103,99 € | Vaata | |
1 | 268,29 € | Vaata | |||
 | |||||
1 | 209,49 € | Vaata | |||
1 | 94,98 € | Vaata | |||
1 | 114,50 € | Vaata | |||
1 | 106,85 € | Vaata | |||
3 | 119,44 € −2,63 € | Vaata | |||
1 | 64,49 € | Vaata | |||
 | 3 | 25,99 € | Vaata | ||
 | 4 | 96,20 € | Vaata | ||
 | 3 | 57,60 € | Vaata | ||
 Corsair CW-9060052-WW Protsessor Kõik-ühes vedelikujahuti 12 cm Must 1 tk The CORSAIR H100 RGB all-in-one liquid CPU cooler delivers strong, dependable cooling and stunning lighting, with two CORSAIR SP120 RGB ELITE PWM fans, a 240mm radiator, and 29 RGB LEDs. | 1-3 tp | 20 | 104,16 € | Vaata | |
 Cooler Master HYPER 212 LGA1700, LGA1200, LGA1151, LGA1150, LGA1155, LGA1156, AM5, AM4. Fan Speed 690-2500 RPM ± 10%. Fan Noise Level 32.8 dBA. Fan Bearing Type Loop Dynamic Bearing. | 1-3 tp | 26 | 37,08 € | Vaata | |
 Cooler Master HYPER 212 HALO ARGB LGA1700, LGA1200, LGA1151, LGA1150, LGA1155, LGA1156, AM5, AM4. Fan Speed 650-2050 RPM ± 10%. Fan Airflow 51.88 CFM (Max). Fan Noise Level 27 dBA (Max). Fan Bearing Type Rifle Bearing. | 17 | 45,27 € | Vaata | ||
 Cooler Master HYPER 212 HALO ARGB LGA1156, LGA1155, LGA1150, LGA1151, AM4, LGA1200, LGA1700, AM5) - Aluminium - 120 mm | 1-3 tp | 31 | 42,08 € | Vaata | |
 Mars Gaming Mars Gaming MCPU-XT Protsessor Kõik-ühes vedelikujahuti 12 cm Must 1 tk Kaasaskantav jahuti Mars Gaming MCPUXT | 4 | 52,90 € | Vaata | ||
 Lian Li Lian Li GALAHAD II 240 Trinity Komplett-Wasserkühlung, ARGB - white All-In-One-Wasserkühlung in Weiß, 240-mm-Radiator, zwei 120-mm-ARGB-Lüfter, 3 austauschbare Pumpendeckel, Unendlichkeitsspiegel-Effekt, schönes Design und leiser Betrieb, angewinkelte Fittinge frei drehbar, kompatibel zu Sockeln von AMD und Intel (inkl. LGA 1700) | Laos | 8 | 118,30 € | Vaata | |
 Alphacool Eisblock Aurora Acryl RX 7900XTX/XT Taichi/Phantom with Backplate Tootekood: 13434 Jahutid ja lisad The next generation - the Alphacool Eisblock Aurora water cooler for Radeon RX 7XXX graphics cards. In order to dissipate the enormous heat of this graphics card generation in the best possible way, numerous optimizations have been made to the water cooler compared to the previous model. The fin structure was adapted and enables a very good water flow while increasing the cooling surface. The modified jet plate with improved inflow engine ensures an optimal distribution of the water on the cooling fins. Technical Highlights The fin structure of this Eisblock cooler generation was developed together with AMD board partners. The fin thickness is 0.4 mm, the distance between the cooling fins is 0.4 mm. This ensures a very good water flow while increasing the cooling surface. The jet plate has a revised inlay that spreads the water pressure better over the fins thus optimizing the heat absorption. The adjusted water inflow gives the water a better angle of inflow. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Design The Aurora design of the Radeon RX 7XXX Eisblock generation is visually calmer and simpler. Only one O-ring runs around the entire cooler. The design around the cooling fins and jetplate makes for a cleaner look. The illumination of the digitally addressable RGB LEDs is even better distributed throughout the cooler as a result of the chrome plating. The terminal's design is in line with the classic Aurora design. Thermal paste & thermal pads The included thermal compound is Alphacool's Subzero. With a thermal conductivity of 16 W/mK, it is one of the highest performing thermal pastes on the market. The electrically non-conductive thermal compund is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850.000 TF. Alphacool Soft Pads with 1mm thickness are used on the voltage converter and the graphics memory. The thermal conductivity of the pads is 7 W/mK. The pads for the back of the PCB are 3mm thick and have a thermal conductivity of 3 W/mK. Compatibility: - ASRock AMD Radeon™ RX 7900 XT Taichi - ASRock AMD Radeon™ RX 7900 XTX Taichi - ASRock AMD Radeon™ RX 7900 XT Phantom - ASRock AMD Radeon™ RX 7900 XTX Phantom Technical data cooler L x W x H 274,1 x 144,56 x 34,54mm Material cooler chrome-plated copper Material cooler top acrylic Threads 4 x G1/4" Thickness cooling fins 0,4mm Distance cooling fins 0,4mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 14 Technical data backplate L x W x H 274,1 x 133,56 x 6mm Material aluminium Color black | 1 | 155,50 € | Vaata | ||
2 | 33,78 € | Vaata | |||
Laos | 8 | 7,90 € | Vaata | ||
 Gembird CPU cooling fan Huracan X40 CPU cooling fan, 9 cm, 55 W, blue LED, 4 pin CPU cooler 9 cm for Intel LGA 775/115X/1200 series and AMD series CPU socket Power dissipation up to 55 W Hydraulic bearing Fan: horizontal MTBF: 40,000 hours Heat dissipation power: 55 W Fan interface: 4 PIN Fan bearing: Hydraulic bearing | 1-3 tp | 13 | 9,00 € | Vaata | |
 EK Water Blocks EK-Quantum Vector TRIO RTX 3080/3090 aktive Backplate D-RGB - Acryl EK-Quantum Vector TRIO RTX 3080/3090 Active Backplate - Acetal ist eine hochmoderne Ergänzung der EK® Quantum Line. Sie ergänzt die bestehenden EK-Quantum Vector TRIO RTX 3080/3090 Wasserblöcke und kühlt aktiv die Rückseite aller MSI® TRIO und SUPRIM GeForce RTX™ 3080 und 3090 GPUs. Die EK-Quantum Vector TRIO RTX 3080/3090 Active Backplate wird mit einem neuen Anschluss geliefert, der den serienmäßigen Anschluss des Vector Wasserblocks ersetzt und den Wasserblock und die Vector Active Backplate zu einer Einheit verbindet. Auf diese Weise benötigt das gesamte Gehäuse nur einen Zu- und einen Abfluss, wodurch unnötige zusätzliche Schläuche entfallen und das Durcheinander reduziert wird. Es ist die ultimative ästhetische und leistungsfähige Lösung, bei der Ihre GPU zwischen zwei Wasserblöcken eingebettet ist, was eine maximale Kühlung ermöglicht. Technische Spezifikation: Abmessungen: (LxHxB) - 307x153x38mm Lieferumfang: EK-Quantum Vector TRIO RTX 3080/3090 Aktive Backplate - Plexi Erforderliche Befestigungsschrauben, Muttern und Unterlegscheiben 1x vernickelter Messingstecker G1/4" EK-Loop Multi Inbusschlüssel (6mm, 8mm, 9mm) Thermische Pads | 2 | 159,80 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RTX 3090 Ti Strix/TUF mit Backplate Tootekood: 14479 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - GeForce RTX™ 3090 Ti ROG Strix LC 24GB (90YV0HC2-M0NA00) - GeForce RTX™ 3090 Ti ROG Strix LC OC Edition 24GB (90YV0HC0-M0NA00) - GeForce RTX™ 3090 Ti TUF Gaming 24GB (90YV0HC3-M0NA00) - GeForce RTX™ 3090 Ti TUF Gaming OC 24GB (90YV0HC1-M0NA00) Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 267 x 161,84 x 48,23mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners L x D 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 1 | 213,80 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RTX 3090 Ti FTW3 mit Backplate Tootekood: 14478 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - EVGA GeForce RTX 3090 Ti FTW3 Ultra Hydro Copper Gaming (24G-P5-4989-KR) - EVGA GeForce RTX 3090 Ti FTW3 Ultra Hybrid Gaming (24G-P5-4988-KR) - EVGA GeForce RTX 3090 Ti FTW3 Ultra Gaming (24G-P5-4985-KR) - EVGA GeForce RTX 3090 Ti FTW3 Gaming (24G-P5-4983-KR) - EVGA GeForce RTX 3090 Ti FTW3 Black Gaming (24G-P5-4981-KR) Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 289,46 x 159,85 x 46mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners L x D 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 1 | 210,80 € | Vaata | ||
1 | 277,29 € | Vaata | |||
 Alphacool Eiswolf 2 AIO - 360mm RTX 3090 Ti Suprim X mit Backplate Tootekood: 14477 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - MSI GeForce RTX 3090 Ti Suprim X 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 3090 Ti Gaming X Trio 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 3090 Ti Gaming Trio 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 3090 Ti Suprim 24G, 24GB GDDR6X, HDMI, 3x DP Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 265,8 x 162,5 x 46mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners L x D 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 1 | 210,80 € | Vaata | ||
 be quiet! Dark Rock Elite CPU-Cooler - 135mm CPU FAN BeQuiet Dark Rock Elite, TDP 280W, L=145/W=136/H=168mm, 1700/1200/115x/1366/AM4/AM5 | Laos | 35 | 111,33 € −0,15 € | Vaata | |
 be quiet! CPU Cooler Dark Pro 5 135mm Silent Wing CPU FAN BeQuiet Dark Rock PRO 5, TDP 270W, L=145/W=136/H=168mm, 1700/1200/115x/1366/AM4/AM5 | Laos | 36 | 87,74 € | Vaata | |
 EK Water Blocks EK-Quantum Momentum² ROG Maximus Z790 Extreme D-RGB - Special Edition Vernickelter Kombi-Wasserkühler (CPU & VRAM), für das ASUS ROG Maximus Z790 Extreme, mit Velocity-Engine für optimierten Durchfluss, für den Einsatz in Workstations und Servern | 4 | 841,26 € +0,79 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RTX 3080/3090 Referenz mit Backplate The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: RTX 3080 TI - Gainward GeForce RTX 3080 Ti 12GB Phoenix - INNO3D GEFORCE RTX 3080 TI ICHILL X4 - INNO3D GEFORCE RTX 3080 TI ICHILL FROSTBITE - INNO3D GEFORCE RTX 3080 TI ICHILL X3 - INNO3D GEFORCE RTX 3080 TI X3 - INNO3D GEFORCE RTX 3080 TI X3 OC - Palit GeForce RTX 3080 Ti GamingPro - Zotac Gaming GeForce RTX 3080 Ti AMP Holo - Zotac GeForce RTX 3080 Ti AMP HoloBlack - Zotac Gaming GeForce RTX 3080 Ti Trinity - Zotac Gaming GeForce RTX 3080 Ti Trinity OC RTX 3080 - Galakuro NVIDIA GEFORCE RTX 3080 GG-RTX3080-E10GB/TP - Galax GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI - Gainward RTX 3080 Phoenix - Gainward RTX 3080 Phoenix GS - Inno3D GeForce RTX 3080 iChill X3/X4 10240 MB GDDR6X - Inno3D GeForce RTX 3080 Twin X2 OC 10240 MB GDDR6X - INNO3D GEFORCE RTX 3080 12GB ICHILL FROSTBITE LHR - INNO3D GEFORCE RTX 3080 12GB X3 OC LHR - INNO3D GEFORCE RTX 3080 12GB ICHILL X3/X4 LHR - INNO3D GEFORCE RTX 3080 12GB ICHILL BLACK LHR - KFA2 GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI - Palit GeForce RTX™ 3080 GamingPro - Palit GeForce RTX™ 3080 GamingPro OC - PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXMPB) - PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXPPB) - Zotac GAMING GeForce RTX 3080 Trinity - Zotac Gaming GeForce RTX 3080 Trinity OC RTX 3090 - Galakuro NVIDIA GEFORCE RTX 3090 GG-RTX3090-E24GB/TP - Galax GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI - Gainward RTX 3090 Phoenix - Gainward RTX 3090 Phoenix GS - Inno3D GeForce RTX 3090 iChill X3/X4, 24576 MB GDDR6X - Inno3D GeForce RTX 3090 Gaming X3, 24576 MB GDDR6X - KFA2 GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI - Palit GeForce RTX™ 3090 GamingPro - Palit GeForce RTX™ 3090 GamingPro OC - PNY GeForce RTX 3090 XLR8 Gaming EPIC-X RGB, 24576 MB GDDR6X - Zotac GeForce RTX 3090 Trinity, 24576 MB GDDR6X Data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins Copper Material chambers Copper Material cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Data cooler and pump L x W x H 130 x 225 x 46 mm Material cooler bottom Chrome plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Data quick fasteners L x D 95 x 27 mm Material Nylon For tube size 12,7 / 7,6 mm Color Black Data fittings L x D straight fitting 24 x 18 mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17 mm Quantity 90° fittings 2x For tube size 12,7 / 7,6 mm Material fittings Brass Data tube Length 50 cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6 mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Net weight 187 g Max working temperature 60 °C | 1 | 319,86 € | Vaata | ||
 Alphacool Eiswolf 2 AIO, 360 mm, 7900XT/X Nitro - mit Backplate Tootekood: 13516 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - Sapphire Nitro+ Radeon RX 7900 XT Vapor-X, 20GB GDDR6, 2x HDMI, 2x DP (11323-01-20G) - Sapphire Nitro+ Radeon RX 7900 XTX Vapor-X, 24GB GDDR6, 2x HDMI, 2x DP (11322-01-20G) Technical data radiator Dimensions (L x W x H) 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Options for fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump Dimensions (L x W x H) 276,70 x 151,05 x 46,10 mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners Dimensions (L x D) 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions (L x W x H) 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 1 | 262,30 € | Vaata | ||
 Alphacool Eiswolf 2 AIO 360mm 7900XT/X with Backplate The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - ASRock Radeon RX 7900 XT Taichi OC, RX7900XT TC 20GO, 20GB GDDR6, HDMI, 3x DP - ASRock Radeon RX 7900 XTX Taichi OC, RX7900XTX TC 24GO, 24GB GDDR6, HDMI, 3x DP, HDMI - ASRock Radeon RX 7900 XT Phantom Gaming OC, RX7900XT PG 20GO, 20GB GDDR6, HDMI, 3x DP (90-GA3XZZ-00UANF) - ASRock Radeon RX 7900 XTX Phantom Gaming OC, RX7900XTX PG 24GO, 24GB GDDR6, HDMI, 3x DP, HDMI Technical data radiator Dimensions (L x W x H) 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Options for fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump Dimensions (L x W x H) 274,10 x 161,15 x 47,52 mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners Dimensions (L x D) 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions (L x W x H) 120 x 120 x 25mm Net weight 187g Max working temperature 60°C | 2 | 262,30 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RX 6800XT/6900XT Nitro+ mit Backplate Tootekood: 14424 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: - Sapphire Nitro+ Radeon RX 6800 XT SE, 16GB GDDR6, HDMI, 2x DP, USB-C (11304-01-20G) - Sapphire Nitro+ Radeon RX 6800 XT, 16GB GDDR6, HDMI, 3x DP (11304-02-20G) - Sapphire Nitro+ Radeon RX 6900 XT, 16GB GDDR6, HDMI, 3x DP (11308-01-20G) Data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins Copper Material chambers Copper Material cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Data cooler and pump L x W x H 260 x 142,5 x 46mm Material cooler bottom Chrome plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Data quick fasteners L x D 95 x 27 mm Material Nylon For tube size 12,7 / 7,6 mm Color Black Data fittings L x D straight fitting 24 x 18 mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17 mm Quantity 90° fittings 2x For tube size 12,7 / 7,6 mm Material fittings Brass Data tube Length 50 cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6 mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Net weight 187 g Max working temperature 60 °C | 1 | 211,80 € | Vaata | ||
 Alphacool Eiswolf 2 AIO - 360mm RX 6800/6800XT/6900 Reference Design mit Backplate Tootekood: 14423 Jahutid ja lisad The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: Radeon RX 6800/6800XT/6900 graphics cards using the reference design Data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material chambers Copper Material cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Data cooler and pump L x W x H 140 x 265 x 46mm Material cooler bottom Chrome plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Data quick fasteners L x D 95 x 27 mm Material Nylon For tube size 12,7 / 7,6 mm Color Black Data fittings L x D straight fitting 24 x 18 mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17 mm Quantity 90° fittings 2x For tube size 12,7 / 7,6 mm Material fittings Brass Data tube Length 50 cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6 mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Net weight 187 g Max working temperature 60 °C | 1 | 208,90 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² Strix/TUF RTX 4090 ABP Set D-RGB - Nickel + Acetal Kühlblock und Backplate mit aktiver Kühlung, für ASUS Strix/TUF GeForce RTX 4090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung | 5 | 429,00 € −28,59 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² Strix/TUF RTX 4090 D-RGB - Nickel + Acryl GPU-Wasserkühler im Full-Block-Design, für ASUS Strix/TUF RTX 4090-Grafikkarten, Kühlkörper aus vernickeltem Kupfer, Deckel aus transparentem Acryl, integrierte D-RGB-Beleuchtung | 5 | 309,00 € | Vaata | ||
1 | 323,58 € | Vaata | |||
5 | 299,00 € | Vaata | |||
 | 1-3 tp | 6 | 5,00 € | Vaata | |
 Zalman Kinnitus ZM-AM5MKA AMD AM5 Mounting Kit Zalman CNPS20X / CNPS17X / CNPS16X / CNPS10X jahutile AM5 kinnitus | 1-3 tp | 6 | 5,00 € | Vaata | |
 Lian Li UNI FAN P28 120mm Black 120-mm-Hochleistungslüfter, Interlocking-Daisy-Chain-Technologie, 28 mm Tiefe für verbesserte Leistung, LCP-Lüfterblätter zur Reduzierung von Vibrationen, verbessertes Motordesign, flüsterleiser Betrieb | 7 | 26,90 € | Vaata | ||
 Lian Li UNI FAN P28 120mm WHite 120-mm-Hochleistungslüfter, Interlocking-Daisy-Chain-Technologie, 28 mm Tiefe für verbesserte Leistung, LCP-Lüfterblätter zur Reduzierung von Vibrationen, verbessertes Motordesign, flüsterleiser Betrieb | 7 | 26,90 € | Vaata | ||
 Lian Li UNI FAN P28 ventilaator, 3-pakk - 120mm, must 120-mm-Hochleistungslüfter im 3er-Pack, Interlocking-Daisy-Chain-Technologie, 28 mm Tiefe für verbesserte Leistung, LCP-Lüfterblätter zur Reduzierung von Vibrationen, verbessertes Motordesign, flüsterleiser Betrieb | 11 | 77,20 € | Vaata | ||
 Lian Li UNI FAN P28 ventilaator, 3 pakki - 120mm, valge 120-mm-Hochleistungslüfter im 3er-Pack, Interlocking-Daisy-Chain-Technologie, 28 mm Tiefe für verbesserte Leistung, LCP-Lüfterblätter zur Reduzierung von Vibrationen, verbessertes Motordesign, flüsterleiser Betrieb | 9 | 66,83 € | Vaata | ||
Jahutid ja lisad
3 932 toodet
11 | 43,76 € | Vaata | ||
| | 6 | 87,45 € | Vaata | |
| | 5 | 74,80 € | Vaata | |
7 | 73,85 € | Vaata | ||
| | 6 | 63,70 € | Vaata | |
| | 1 | 52,90 € | Vaata | |
44 | 103,99 € | Vaata | ||
1 | 268,29 € | Vaata | ||
| | ||||
1 | 209,49 € | Vaata | ||
1 | 94,98 € | Vaata | ||
1 | 114,50 € | Vaata | ||
1 | 106,85 € | Vaata | ||
3 | 119,44 € −2,63 € | Vaata | ||
1 | 64,49 € | Vaata | ||
3 | 25,99 € | Vaata | ||
| | 4 | 96,20 € | Vaata | |
| | 3 | 57,60 € | Vaata | |
20 | 104,16 € | Vaata | ||
| | 26 | 37,08 € | Vaata | |
| | 17 | 45,27 € | Vaata | |
| | 31 | 42,08 € | Vaata | |
4 | 52,90 € | Vaata | ||
8 | 118,30 € | Vaata | ||
1 | 155,50 € | Vaata | ||
2 | 33,78 € | Vaata | ||
8 | 7,90 € | Vaata | ||
| | 13 | 9,00 € | Vaata | |
2 | 159,80 € | Vaata | ||
1 | 213,80 € | Vaata | ||
1 | 210,80 € | Vaata | ||
1 | 277,29 € | Vaata | ||
1 | 210,80 € | Vaata | ||
| | 35 | 111,33 € −0,15 € | Vaata | |
36 | 87,74 € | Vaata | ||
4 | 841,26 € +0,79 € | Vaata | ||
1 | 319,86 € | Vaata | ||
1 | 262,30 € | Vaata | ||
2 | 262,30 € | Vaata | ||
1 | 211,80 € | Vaata | ||
1 | 208,90 € | Vaata | ||
5 | 429,00 € −28,59 € | Vaata | ||
5 | 309,00 € | Vaata | ||
1 | 323,58 € | Vaata | ||
5 | 299,00 € | Vaata | ||
| | 6 | 5,00 € | Vaata | |
6 | 5,00 € | Vaata | ||
| | 7 | 26,90 € | Vaata | |
| | 7 | 26,90 € | Vaata | |
11 | 77,20 € | Vaata | ||
9 | 66,83 € | Vaata | ||
