Jahutid ja lisad

GPU-Wasserkühler im Full-Block-Design, für RX 7900 XTX RE-Grafikkarten, Kühlkörper aus vernickeltem Kupfer, Deckel aus schwarzem Acetal, integrierte D-RGB-Beleuchtung

Gigabyte Aorus WaterForce X II 360 Ice

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.   Compatibility: - ASUS TUF Gaming GeForce RTX 4090 OC, TUF-RTX4090-O24G-GAMING, 24GB GDDR6X (90YV0IE0-M0NA00) - ASUS TUF Gaming GeForce RTX 4090, TUF-RTX4090-24G-GAMING, 24GB GDDR6X (90YV0IE1-M0NA00) - ASUS ROG Strix GeForce RTX 4090 OC, ROG-STRIX-RTX4090-O24G-GAMING, 24GB GDDR6X (90YV0ID0-M0NA00) - ASUS ROG Strix GeForce RTX 4090, ROG-STRIX-RTX4090-24G-GAMING, 24GB GDDR6X (90YV0ID1-M0NA00)   Technical data radiator Dimensions (L x W x H) 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Options for fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump Dimensions (L x W x H) 220,90 x 166,60 x 46,10 mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners Dimensions (L x D) 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions (L x W x H) 120 x 120 x 25mm Net weight 187g Max working temperature 60°C

Liquid CPU Cooler - 3x120mm ARGB Fans, full-color LCD, MAGNETIC interlocking mechanism, DAISY-CHAIN, Intel LGA 1700 and AMD AM5 Compatible, 6 Year Warranty

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.   Compatibility: - Nvidia GeForce RTX 4090 Founders Edition   Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Options for fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 205,42 x 156,89 x 47,8mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners L x D 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25mm Net weight 187g Max working temperature 60°C

AORUS WATERFORCE X 360 | Liquid | LGA1150/LGA1151/LGA1155/LGA1156/LGA1200/LGA1366/LGA1700/LGA2011/LGA2066/SAM4/SAM5/STR4/sTRX4 | Fan speed 800-2300rpm | Air flow 60 cfm | Fan light | Noise level, max 37.6 dB | Dimensions 394 x 119 x 27mm; pump - 82 x 82 x 74mm | Weight 2.4 kg

Revolutionise your system with the All in One that changes everything. The Alphacool Eisbaer Extreme is stronger, more beautiful and quieter than anything you've seen before in the AiO water cooling market.Eisblock XPX- Freedom and maximum comfortFor the Eisbaer Extreme AiO, Alphacool relies on its award winning Eisblock XPX CPU cooler. It is known for its cooling performance at the highest level and impresses with its elegant design. Mounting is possible on all common AMD and Intel sockets. With the Eisbaer Extreme you enjoy absolute performance and quality.Progress into a New AgeAlphacool gives you the flexibility you need. Use your Eisbaer Extreme perfectly thanks to the new Eisbaer Ready quick-release couplings. These are compatible with all Eiswolf / Eisbaer quick release connections. The redesigned, powerful VPP755 Eispump gives you the flow you need.IndividualWith the Eisbaer Extreme you decide how your system is structured. You can expand this All-in-One at any time with additional components, modify it or fill it according to your desires. Whether you install the Eisbaer Extreme horizontally or vertically, it's up to you how you showcase your water cooling system. Compatibility:AMD: AM3 / AM3+ / AM4 / AM5 / FM2 / FM2+ / TR4Intel: LGA 1150 / LGA 1151 / LGA 1155 / LGA 1156 / LGA 1200 / LGA 1366 / LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 Technical data (general)Dimensions (LxWxH)385,5 x 156 x 64mmHousing materialaluminiumReservoirintegrated, 138mlMaintenance optionsFillport with patented screw plugTechnical data Alphacool Eispumpe VPP755 V.3ControlPWMConnection4Pin PWM / 4Pin MolexMaximum head pressure4,25mOther specificationsStartboost function, self-venting, improved software, new bearing of the ceramic axlesControl range1. 2100 rpm 120l/h | 2. 2700 rpm 140l/h | 3. 3330 rpm 280l/h | 4. 3950 rpm 320l/h | 5. 4350 rpm 340l/hTechnical data Alphacool Eisblock XPXDimensions65 x 65 x 30mmConnections2x G1/4“Pressure tested0,8 BarHousing materialaluminium/acetalMaterial bottomnickel-plated copperTechnical data fanMaterialsynthetic material (PBT UL94V-0)Bearing Typehydraulic BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Power5.4 (Max: 6.0) WControl Range0 - 2000 rpm ±10%Max. Air Flow103.03 CFMMax. Static Pressure2.81 mm/H2ONoise level38.3 (Max: 40.0) dBALife Expectance50000 h bei 25 Grad CelsiusConnection4-Pin PWMSpeed Control Modevia PWM

All-in-One Wasserkühlung, Mit integrierter RGB-Beleuchtung, 360-mm-Radiator und starke Kupferplatte, Pumpe von Asetek

Full-Cover-Waterblock von EK Water Blocks, für GIGABYTE AORUS Master und Xtreme 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung

The EK-Quantum Magnitude is the new ultimate bespoke CPU water block from EK® that brings the highest cooling performance with the lowest possible flow restriction. The 115x version of the water block is using a specific combination of flow distribution insert, mounting pressure, and cold plate geometry tailored for the IHS and die layout of Intel® 115x socket processors. Different from any mounting structure used by other water blocks that are usually black and mundane plates, the design accentuates an integrated X-shaped, three-dimensional frame with premium finishes that firmly cradles the main body in place while the screws are morphed into a sophisticated design detail. Specialized manufacturing techniques were deployed to create this truly unique product. Not a single component of Magnitude was made using mass production techniques; instead, every single piece was CNC machined separately, out of a solid piece of material. This version of the water block features a nickel-plated copper cold plate with a high-grade glass-like top CNC machined out of cast acrylic. A CNC machined solid brass insert made it possible to significantly enlarge and optimize the cooling engine. Compared to previous generations of water blocks, the fin array has a 50% bigger surface area, all contained in a smaller footprint to ensure maximum compatibility even with mITX motherboards. The copper cold plate uses 0.40mm wide microchannels and 0.26mm thick microfins to maximize the thermal transfer with minimal flow restriction. Since EK-Quantum Magnitude was engineered from the ground up for each specific socket, the 115x version features an insert that directs flow evenly over the CPU die which is used in combination with a cold plate geometry that is specific to 115x socket processors. One more feature of the Intel-based Magnitude CPU water block is the reversible insert that can accommodate easier tube routing. It allows the user to swap the inlet and outlet port, by simply rotating the brass insert piece by 180°. The aesthetic interchangeable inner frame is also machined out of a single piece of brass, which is subsequently nickel-plated. The aesthetic frame can be replaced with color-anodized aluminum variants that perfectly match EK-Quantum Torque fitting lineup or with a white POM acetal piece that can be used as a light dispersion element for addressable D-RGB LEDs. The aesthetic interchangeable inner frames are sold separately. Elegantly concealed under the aesthetic inner frame is a LED strip boasting the incredible 30, individually addressable D-RGB diodes that shine inward and illuminate the translucent top. The addressable D-RGB is using an industry-standard 3-pin 5V digital LED connector (Pinout: +5V, Data, Blocked, Ground). The mounting mechanism is a three-dimensional H shaped aluminum piece that makes the screws a seamless part of the water block. Strong edges and chamfers root this award-winning icon firmly among the EK-Quantum line. Did we say award-winning? EK-Quantum Magnitude is bearing the prestigious iF Design award for its bold and different approach to the CPU water block mounting mechanism. The cold plate of the Magnitude water block is intentionally machined into a convex shape to align with the concave shape of the CPU IHS. However, if you are interested in a flat cold plate that works perfectly with lapped CPUs or aftermarket IHSs, EK is providing a special, flat bare copper as well as nickel-plated copper cold plates that are sold separately. The Magnitude is supplied with an additional, thicker jet plate. If the user concludes that his CPU IHS is exceptionally concave (poor thermal paste spread after mounting), the curvature of the water block cold plate can be adjusted by using this secondary jet plate. It will make the center of the contact area bow by an additional 0.1mm outwards, for it to make better contact with the IHS. Technical specifications: - D-RGB cable length: 50cm - D-RGB connector standard 3-pin (+5V, D, Blocked, Ground) CPU socket compatibility: - Intel LGA-1200 - Intel LGA-1150 - Intel LGA-1151 - Intel LGA-1155 - Intel LGA-1156 Enclosed: - EK-Quantum Magnitude Water Block - Mounting mechanism with all necessary springs, screws, and washers - Additional jet plate - 0.6P - Thermal Grizzly Hydronaut (1.0g) Thermal Paste - Allen (Hex) key - 2.5mm Made in Slovenia, EU

Funktionaler Fan- und RGB-LED-Controller, mit separatem LC-Display, 6x 4-Pin PWM Lüfter, 6x adressierbare RGB (5VDG), 6x Temperatursensor, inklusive Fernbedienung

Wärmeleitpad für Höchstleistungen, 2 mm Stärke, 100 x 100 mm Größe

Vernickelter Kombi-Wasserkühler (CPU & VRAM), für das ASUS ROG Crosshair X670E Hero, mit adressierbarer D-RGB-Beleuchtung und Velocity-Engine für optimierten Durchfluss.

The flagship ROG Ryujin II ARGB all-in-one cooler delivers ultimate thermal performance for gamers looking for the absolute best. With a 7th-generation Asetek pump, ROG ARGB fans, and an embedded fan for the CPU socket area, it harnesses both water and air to provide incredible cooling capabilities. And with an LCD panel that displays system stats and customizable graphics, ROG Ryujin II ARGB become the heart of your system.

The EK-Quantum Magnitude is the new ultimate bespoke CPU water block from EK that brings the highest cooling performance with the lowest possible flow restriction. The AM4 version of the water block is using a specific combination of flow distribution insert, mounting pressure, and cold plate geometry tailored for the IHS and chiplet layout of AMD AM4 socket processors. Different from any mounting structure used by other water blocks that are usually black and mundane plates, the design accentuates an integrated H-shaped, three-dimensional frame with premium finishes that firmly cradles the main body in place while the screws are morphed into a sophisticated design detail. Specialized manufacturing techniques were deployed to create this truly unique product. Not a single component of Magnitude was made using mass production techniques; instead, every single piece was CNC machined separately, out of a solid piece of material. This version of the water block features a nickel-plated copper cold plate with a high-grade glass-like top CNC machined out of cast acrylic. A CNC machined solid brass insert made it possible to significantly enlarge and optimize the cooling engine. Compared to previous generations of water blocks, the fin array has a 50% bigger surface area, all contained in a smaller footprint to ensure maximum compatibility even with mITX motherboards. The copper cold plate uses 0.40mm wide microchannels and 0.26mm thick microfins to maximize the thermal transfer with minimal flow restriction. Since EK-Quantum Magnitude was engineered from the ground up for each specific socket, the AM4 version features an offset insert that directs more flow over the AMD Ryzen CPU chiplets with the I/O die still getting plenty of flow to keep it cool. The aesthetic interchangeable inner frame is also machined out of a single piece of brass, which is subsequently nickel-plated. The aesthetic frame can be replaced with color-anodized aluminum variants that perfectly match EK-Quantum Torque fitting lineup or with a white POM acetal piece that can be used as a light dispersion element for addressable D-RGB LEDs. The aesthetic interchangeable inner frames are sold separately. Elegantly concealed under the aesthetic inner frame is a LED strip boasting the incredible 30, individually addressable D-RGB diodes that shine inward and illuminate the translucent top. The addressable D-RGB is using an industry-standard 3-pin 5V digital LED connector (Pinout: +5V, Data, Blocked, Ground). The mounting mechanism is a three-dimensional H shaped aluminum piece that makes the screws a seamless part of the water block. Strong edges and chamfers root this award-winning icon firmly among the EK-Quantum line. Did we say award-winning? EK-Quantum Magnitude is bearing the prestigious iF Design award for its bold and different approach to the CPU water block mounting mechanism. The cold plate of the Magnitude water block is intentionally machined into a convex shape to align with the concave shape of the CPU IHS. However, if you are interested in a flat cold plate that works perfectly with lapped CPUs or aftermarket IHSs, EK is providing a special, flat bare copper as well as nickel-plated copper cold plates that are sold separately. The Magnitude is supplied with an additional, thicker jet plate. If the user concludes that his CPU IHS is exceptionally concave (poor thermal paste spread after mounting), the curvature of the water block cold plate can be adjusted by using this secondary jet plate. It will make the center of the contact area bow by an additional 0.1mm outwards, for it to make better contact with the IHS. Technical specifications: - D-RGB cable length: 50cm - D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) CPU socket compatibility: - AMD AM4 Enclosed: - EK-Quantum Magnitude Water Block - Mounting mechanism with all necessary springs, screws, and washers - AMD AM4 Socket compatible backplate - Additional jet plate - 0.6P - Thermal Grizzly Hydronaut (1.0g) Thermal Paste - Allen (Hex) key - 2.5mm Made in Slovenia, EU

NZXT CPU water cooling Kraken Elite 240 RGB LCD

The EK-Quantum Magnitude is the new ultimate bespoke CPU water block from EK® that brings the highest cooling performance with the lowest possible flow restriction. The 20xx version of the water block is using a specific combination of flow distribution insert, mounting pressure, and cold plate geometry tailored for the IHS and die layout of Intel® HEDT 20xx socket processors. Different from any mounting structure used by other water blocks that are usually black and mundane plates, the design accentuates an integrated X-shaped, three-dimensional frame with premium finishes that firmly cradles the main body in place while the screws are morphed into a sophisticated design detail. Specialized manufacturing techniques were deployed to create this truly unique product. Not a single component of Magnitude was made using mass production techniques; instead, every single piece was CNC machined separately, out of a solid piece of material. This version of the water block features a nickel-plated copper cold plate with a nickel-plated top CNC machined out of hard-wearing brass. A CNC machined solid brass insert made it possible to significantly enlarge and optimize the cooling engine. Compared to previous generations of water blocks, the fin array has a 50% bigger surface area, all contained in a smaller footprint to ensure maximum compatibility even with mITX motherboards. The copper cold plate uses 0.40mm wide microchannels and 0.26mm thick microfins to maximize the thermal transfer with minimal flow restriction. Since EK-Quantum Magnitude was engineered from the ground up for each specific socket, the 20xx version features an insert that directs flow evenly over the CPU die which is used in combination with a cold plate geometry that is specific to 20xx socket processors. One more feature of the Intel-based Magnitude CPU water block is the reversible insert that can accommodate easier tube routing. It allows the user to swap the inlet and outlet port, by simply rotating the brass insert piece by 180°. The aesthetic interchangeable inner frame is also machined out of a single piece of brass, which is subsequently nickel-plated. The aesthetic frame can be replaced with color-anodized aluminum variants that perfectly match EK-Quantum Torque fitting lineup or with a white POM acetal piece that can be used as a light dispersion element for addressable D-RGB LEDs. The aesthetic interchangeable inner frames are sold separately. The mounting mechanism is a three-dimensional H shaped aluminum piece that makes the screws a seamless part of the water block. Strong edges and chamfers root this award-winning icon firmly among the EK-Quantum line. Did we say award-winning? EK-Quantum Magnitude is bearing the prestigious iF Design award for its bold and different approach to the CPU water block mounting mechanism. The cold plate of the Magnitude water block is intentionally machined into a convex shape to align with the concave shape of the CPU IHS. However, if you are interested in a flat cold plate that works perfectly with lapped CPUs or aftermarket IHSs, EK is providing a special, flat bare copper as well as nickel-plated copper cold plates that are sold separately. The Magnitude is supplied with an additional, thicker jet plate. If the user concludes that his CPU IHS is exceptionally concave (poor thermal paste spread after mounting), the curvature of the water block cold plate can be adjusted by using this secondary jet plate. It will make the center of the contact area bow by an additional 0.1mm outwards, for it to make better contact with the IHS. CPU socket compatibility: - Intel LGA-2066 - Intel LGA-2011(-3) Enclosed: - EK-Quantum Magnitude Water Block - Mounting mechanism with all necessary springs, screws, and washers - Additional jet plate - 0.6P - Thermal Grizzly Hydronaut (1.0g) Thermal Paste - Allen (Hex) key - 2.5mm Made in Slovenia, EU

The Alphacool ES 1U ServerRack has been specifically optimised to accommodate water cooling sets that can dissipate up to 490W of waste heat in this enclosure. For this purpose, the enclosure not only offers a mounting frame for a maximum of one 7x40mm full copper radiator of the Alphacool NexXxoS series. The optionally available Alphacool ES 40 mm fans with PWM control ensure optimum cooling performance. Drives The 1U server rack offers mounting options for two 5.25" drives on the left and right side of the front. Each 5.25" bay offers the alternative of mounting two 3.5" drives. A holding frame for mounting up to four 2.5" drives is pre-mounted in the centre front. This holding frame can be mounted at five other positions in the enclosure. Mainboard For mounting an SSI-EBB mainboard, all the usual screw connection options in the classic ATX format are available. This includes all mounting holes for Mini-ITX to EE-ATX. A graphics card in PCIe or 0.8" low-profile format can also be installed via a riser cable. A corresponding panel for 0.8" cards is pre-mounted in the case. Water cooling for 490W waste heat With an appropriate water cooling system, up to 490W of waste heat can be dissipated in this case. Alphacool offers special water cooling sets for this purpose, which can be individually configured and are delivered to the customer pre-filled. The mounting frame for the radiator and fans can be moved within the enclosure to suit any set-up. Please note: The case comes without I/O panel. Alphacool offers a separate set of I/O panel and cable set under item number 1021066. Overview of all compatible sets for this enclosure can be found here! (Attention: This link redirects you to the manufacturer's website www.alphacool.com) Alphacool recommends the following compatible products for this case. Radiators 1015753 - NexXxoS UT60 Full Copper X-Flow 40mm Dual (2 x 40mm) 1015717 - NexXxoS UT60 Full Copper X-Flow 40mm Triple (3 x 40mm) 1015718 - NexXxoS UT60 Full Copper X-Flow 40mm Quad (4 x 40mm) 1015719 - NexXxoS UT60 Full Copper X-Flow 40mm Penta (5 x 40mm) 1015720 - NexXxoS UT60 Full Copper X-Flow 40mm Hexa (6 x 40mm) 1015721 - NexXxoS UT60 Full Copper X-Flow 40mm Hepta (7 x 40mm) Reservoir with integrated pump top 1016193 - Alphacool Eisstation 40 DC-LT (Empfohlene Pumpe: 49061 ) 1017717 - Alphacool ES Reservoir 1U – DDC (Empfohlene Pumpe: 1019539 ) CPU Cooler 1016218 - Alphacool XPX 1U (AMD AM4, Intel LGA 1150, 1151, 1200, 2033, 2033-1, 2066) 1015815 - Alphacool XPX Pro 1U (AMD TR4, sTRX4, SP3, sWRX8, Intel LGA 2011, 2011,3, 2066, 3647) Fans 1020163 - Alphacool ES 40mm 400-15.000rpm PWM (40x40x28mm) 1020160 - Alphacool ES 40mm 400-10.000rpm PWM (40x40x20mm) Techncal data: Form factor 1HE (2U) Length 730,75 mm (28,77 Inch) Width 478,50 mm (18,84 Inch) Height 44,45 mm (1,75 Inch) Weight 7,62 kg (16,80 lbs) Material Galvanised sheet steel Materialdicke 1,2 mm Colour Case Grey Colour Front Black Standard Optional 2 x 5,25“ Slots Per Slot 1 x 3,5“ 4 x 2.5“ HDD/SSD Download Manual PDF: Alphacool ES 1U - 19" Serverrack Download Datasheet PDF: Alphacool ES 1U - 19" Serverrack

The EK-Quantum Magnitude is the new ultimate bespoke CPU water block from EK® that brings the highest cooling performance with the lowest possible flow restriction. The 115x version of the water block is using a specific combination of flow distribution insert, mounting pressure, and cold plate geometry tailored for the IHS and die layout of Intel® 115x socket processors. Different from any mounting structure used by other water blocks that are usually black and mundane plates, the design accentuates an integrated X-shaped, three-dimensional frame with premium finishes that firmly cradles the main body in place while the screws are morphed into a sophisticated design detail. Specialized manufacturing techniques were deployed to create this truly unique product. Not a single component of Magnitude was made using mass production techniques; instead, every single piece was CNC machined separately, out of a solid piece of material. This version of the water block features a nickel-plated copper cold plate with a minimalistic black top CNC machined out of durable POM acetal. A CNC machined solid brass insert made it possible to significantly enlarge and optimize the cooling engine. Compared to previous generations of water blocks, the fin array has a 50% bigger surface area, all contained in a smaller footprint to ensure maximum compatibility even with mITX motherboards. The copper cold plate uses 0.40mm wide microchannels and 0.26mm thick microfins to maximize the thermal transfer with minimal flow restriction. Since EK-Quantum Magnitude was engineered from the ground up for each specific socket, the 115x version features an insert that directs flow evenly over the CPU die which is used in combination with a cold plate geometry that is specific to 115x socket processors. One more feature of the Intel-based Magnitude CPU water block is the reversible insert that can accommodate easier tube routing. It allows the user to swap the inlet and outlet port, by simply rotating the brass insert piece by 180°. The aesthetic interchangeable inner frame is also machined out of a single piece of white POM acetal which acts as a light dispersion element for addressable D-RGB LEDs. The aesthetic frame can be replaced with color-anodized aluminum variants that perfectly match EK-Quantum Torque fitting lineup or with a brass nickel-plated frame. The aesthetic interchangeable inner frames are sold separately. Elegantly concealed under the aesthetic inner frame is a LED strip boasting the incredible 30, individually addressable D-RGB diodes that shine outward and illuminate the white frame. The addressable D-RGB is using an industry-standard 3-pin 5V digital LED connector (Pinout: +5V, Data, Blocked, Ground). The mounting mechanism is a three-dimensional H shaped aluminum piece that makes the screws a seamless part of the water block. Strong edges and chamfers root this award-winning icon firmly among the EK-Quantum line. Did we say award-winning? EK-Quantum Magnitude is bearing the prestigious iF Design award for its bold and different approach to the CPU water block mounting mechanism. The cold plate of the Magnitude water block is intentionally machined into a convex shape to align with the concave shape of the CPU IHS. However, if you are interested in a flat cold plate that works perfectly with lapped CPUs or aftermarket IHSs, EK is providing a special, flat bare copper as well as nickel-plated copper cold plates that are sold separately. The Magnitude is supplied with an additional, thicker jet plate. If the user concludes that his CPU IHS is exceptionally concave (poor thermal paste spread after mounting), the curvature of the water block cold plate can be adjusted by using this secondary jet plate. It will make the center of the contact area bow by an additional 0.1mm outwards, for it to make better contact with the IHS. Technical specifications: - D-RGB cable length: 50cm - D-RGB connector standard 3-pin (+5V, D, Blocked, Ground) CPU socket compatibility: - Intel LGA-1200 - Intel LGA-1150 - Intel LGA-1151 - Intel LGA-1155 - Intel LGA-1156 Enclosed: - EK-Quantum Magnitude Water Block - Mounting mechanism with all necessary springs, screws, and washers - Additional jet plate - 0.6P - Thermal Grizzly Hydronaut (1.0g) Thermal Paste - Allen (Hex) key - 2.5mm Made in Slovenia, EU

Thermaltake jahutus Pacific M360 D5 (360mm, copper, Hard Tube) kit

NZXT CPU water cooling Kraken Elite 280 RGB LCD

Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances. Compatibility:- XFX Speedster MERC 310 Radeon RX 7900 XT Black Edition, 20GB GDDR6 (RX-79TMERCB9)- XFX Speedster MERC 310 Radeon RX 7900 XT, 20GB GDDR6 (RX-79TMERCU9)- XFX Speedster MERC 310 Radeon RX 7900 XTX Black Edition, 24GB GDDR6 (RX-79XMERCB9) Technical data coolerDimensions (L x W x H)289,60 x 134,80 x 32,20mmMaterial coolerchrome-plated copperMaterial cooler topacrylicThreads4 x G1/4"Thickness cooler bottom11,3mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs17ColortransparentTechnical data backplateDimensions (L x W x H)289,60 x 111,80 x 5mmMaterialaluminiumColorblackWarranty: 3 years???? Warranty Terms

Vernickelter Full-Block-Wasserkühler, für Gigabyte Aorus GeForce RTX 3080/3090 (Xtreme/Master), mit Acrylglas-Deckel und Aluminium-Backplate, integrierte digitale RGB-LED-Beleuchtung, kompatibel mit diverser RGB-Software, inklusive Wärmleitpaste und -pads

Full-Block-GPU-Kühler für Custom-Wasserkühlungen, für ASUS ROG Strix/TUF AMD RX 6800/6900, Deckel aus transparentem Acrylglas, mit verchromtem Aluminium-Cover, integrierte digitale RGB-Beleuchtung (3-Pin, 5VDG)

Full-Block-GPU-Kühler für Custom-Wasserkühlungen, für ASUS ROG Strix/TUF AMD RX 6800/6900, Deckel aus transparentem Acrylglas, mit verchromtem Aluminium-Cover, integrierte digitale RGB-Beleuchtung (3-Pin, 5VDG)

CPU COOLER AORUS/WATERFORCE X 240 GIGABYTE

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The Lux Pro fans, as known from the Eisbaer Aurora series, are also used for the Eiswolf 2. They also have an extraordinary lighting with Digital RGB LEDs. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. A suitable backplate can be found under the following article number: 12959 Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there. Compatibility: Gigabyte GeForce RTX 2060 Gaming OC 6G, 6GB GDDR6, HDMI, 3x DP Gigabyte GeForce RTX 2060 SUPER Gaming OC 8G, 8GB GDDR6, HDMI, 3x DP ASUS Turbo GeForce RTX 2070, TURBO-RTX2070-8G, 8GB GDDR6 EVGA GeForce RTX 2070 XC Black Edition Gaming, 8GB GDDR6 EVGA GeForce RTX 2070 XC Ultra Gaming, 8GB GDDR6 KFA2 GeForce RTX 2070 OC, 8GB GDDR6, HDMI, 3x DP, USB-C MSI GeForce RTX 2070 Aero 8G, 8GB GDDR6 Palit GeForce RTX 2070 GamingPro OC V1, 8GB GDDR6 Palit GeForce RTX 2070 GamingPro OC, 8GB GDDR6 Palit GeForce RTX 2070 Dual, 8GB GDDR6 ASUS Turbo GeForce RTX 2070 SUPER Evo, TURBO-RTX2070S-8G-EVO, 8GB GDDR6 EVGA GeForce RTX 2070 SUPER Black Gaming, 8GB GDDR6, HDMI, 3x DP Gigabyte GeForce RTX 2070 Gaming OC 8G, 8GB GDDR6 Gigabyte GeForce RTX 2070 Super Gaming OC 8G, 8GB GDDR6 Gigabyte GeForce RTX 2070 SUPER Windforce OC 8G, 8GB GDDR6, HDMI EVGA GeForce RTX 2070 SUPER Black Gaming, 8GB GDDR6, HDMI, 3x DP Palit GeForce RTX 2070 SUPER X, 8GB GDDR6, HDMI, 3x DP Zotac Gaming GeForce RTX 2070 SUPER Twin Fan, 8GB GDDR6, HDMI, 3x DP ASUS Turbo GeForce RTX 2080, TURBO-RTX2080-8G, 8GB GDDR6 EVGA GeForce RTX 2080 XC Gaming, 8GB GDDR6 EVGA GeForce RTX 2080 XC Ultra Gaming, 8GB GDDR6 Gigabyte GeForce RTX 2080 Gaming OC 8G, 8GB GDDR6 Gigabyte GeForce RTX 2080 Turbo 8G, 8GB GDDR6 Gigabyte GeForce RTX 2080 Turbo OC 8G, 8GB GDDR6 Gigabyte GeForce RTX 2080 Windforce OC 8G, 8GB GDDR6 INNO3D GeForce RTX 2080 Gaming OC, 8GB GDDR6 INNO3D GeForce RTX 2080 Jet, 8GB GDDR6 KFA2 GeForce RTX 2080 OC, 8GB GDDR6, HDMI, 3x DP, USB-C Manli GeForce RTX 2080 Gallardo, 8GB GDDR6, HDMI, 3x DP, USB-C MSI GeForce RTX 2080 Aero 8G, 8GB GDDR6, HDMI, 3x DP, USB-C MSI GeForce RTX 2080 Duke 8G OC, 8GB GDDR6, HDMI, 3x DP, USB-C MSI GeForce RTX 2080 Sea Hawk X, 8GB GDDR6 MSI GeForce RTX 2080 Ventus 8G OC, 8GB GDDR6, HDMI, 3x DP, USB-C MSI GeForce RTX 2080 Ventus 8G, 8GB GDDR6, HDMI, 3x DP, USB-C Nvidia Geforce RTX 2080 Founders Edition Palit GeForce RTX 2080 GamingPro OC, 8GB GDDR6 Palit GeForce RTX 2080 GamingPro, 8GB GDDR6 PNY GeForce RTX 2080 XLR8 Gaming OC Triple Fan, 8GB GDDR6 PNY GeForce RTX 2080 XLR8 Gaming OC Twin Fan, 8GB GDDR6 Zotac GAMING GeForce RTX 2080 AMP! Edition, 8192 MB GDDR6 ASUS Dual GeForce RTX 2080 Ti Advanced, DUAL-RTX2080TI-A11G ASUS Dual GeForce RTX 2080 Ti OC, 11GB GDDR6 ASUS Turbo GeForce RTX 2080 Ti, TURBO-RTX2080TI-11G, 11GB GDDR6 EVGA GeForce RTX 2080 Ti 11GB EVGA GeForce RTX 2080 Ti 11GB BLACK EVGA GeForce RTX 2080 Ti Gaming, 11GB GDDR6, HDMI, 2x DP, USB-C EVGA GeForce RTX 2080 Ti XC EVGA GeForce RTX 2080 Ti XC ULTRA GAMING EVGA GeForce RTX 2080 Ti XC2 Ultra Gaming, 11GB GDDR6 Gainward GeForce RTX 2080 Ti Phoenix GS, 11GB GDDR6 Gainward GeForce RTX 2080 Ti Phoenix, 11GB GDDR6 GIGABYTE GeForce RTX 2080 Ti GAMING OC 11G Gigabyte GeForce RTX 2080 Ti Turbo OC 11G, 11GB GDDR6 Gigabyte GeForce RTX 2080 Ti Windforce 11G, 11GB GDDR6 GIGABYTE GeForce RTX 2080 Ti WINDFORCE OC 11G Inno3D GeForce RTX 2080 Ti Gaming OC X3, 11GB GDDR6 Inno3D GeForce RTX 2080 Ti Gaming OC, 11GB GDDR6 Inno3D GeForce RTX 2080 Ti Twin X2, 11GB GDDR6 KFA2 GeForce RTX 2080 Ti Dual Black [1-Click OC], 11GB GDDR6, HDMI, 3x DP KFA² GeForce RTX 2080 Ti OC, 11GB GDDR6 MSI GeForce RTX 2080 Ti Duke 11G OC, 11GB GDDR6 MSI GeForce RTX 2080 Ti Duke 11G, 11GB GDDR6 MSI GeForce RTX 2080 Ti Sea Hawk X, 11GB GDDR6 MSI GeForce RTX 2080 Ti Ventus 11G, 11GB GDDR6 Nvidia Geforce RTX 2080Ti Founders Edition Palit GeForce RTX 2080 Ti Dual, 11GB GDDR6 Palit GeForce RTX 2080 Ti GamingPro OC, 11GB GDDR6 Palit GeForce RTX 2080 Ti GamingPro, 11GB GDDR6 PNY GeForce RTX 2080 Ti XLR8 Gaming Overclocked, 11GB GDDR6 Zotac GAMING GeForce RTX 2080 Ti Triple Fan Zotac Gaming GeForce RTX 2080 Ti Blower, 11GB GDDR6 EVGA GeForce RTX 2080 SUPER Black Gaming, 8GB GDDR6, HDMI, 3x DP MSI GeForce RTX 2080 SUPER Ventus, 8GB GDDR6, HDMI, 3x DP PNY GeForce RTX 2080 SUPER Blower, 8GB GDDR6, HDMI, 3x DP Technical data radiator L x W x H 278 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 2 x one-sided / 4 x both-sided Technical data cooler and pump L x W x H 263,7 x 130,9 x 46,2mm Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners L x D 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 28 x 20mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 40cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 800 - 2000 RPM Static pressure 2,0 mm H2O Air flow rate 104,49 m³/h Bearings Hydraulic bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25mm

Full-Cover-Waterblock von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung

Full-Cover-Waterblock von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung

The Lian Li O11D Mini Front MK2 is made of high-quality and transparent acrylic glass, consists of a large chamber and 5 channels. As befits a distro plate, it allows all radiators, as well as GPU and CPU to be connected to each other in the circuit. For this purpose, 12 ports (incl. fill port & drain port) are available. The MK2 replaces the original front panel. The screw points provided by Lian Li can be used for fixing. For compatibility of the Distro Plate with radiators, please note that only (!) "EKWB SE360 (2x)" & "EKWB SE240 (1x)" can be used. In addition to the screw set for fixing the Distro Plate to the housing, the scope of delivery includes a specially developed D5 adapter (WITHOUT PUMP!). The adapter is compatible with every common D5 pump and is decoupled from the Distro Plate. The vibrations of the pump have been reduced to a minimum by means of rubber-mounted sealing rings, which results in less noise pollution. Features at a glance Smallest distro plate in the Lian Li range Unique plug-in system for easy installation in the case Adapter enables perfect fit of a D5 pump Compatible with EK-CoolStream SE360 2x and 1x SE240mm Technical details Material: high-quality acrylic glass, plastic Manufacturing: CNC machining of the acrylic, assembly by hand Dimensions: without pump (W x H x D): 487 x 211 x 21 mm with pump (W x H x D): 487 x 211 x 90 mm Colour: transparent Connections: 12x G1/4 inch connections Capacity: 435 ml Compatibility: 3x360mm fan space Scope of delivery Lian Li Mini MK2 4x M3 glands

ROG STRIX LC II 360 ARGB kõik-ühes vedel protsessori jahuti koos Aura Synci, Intel® LGA 1700, 1200, 1150, 1151, 1152, 1155, 1156, 2011, 2011-3, AMD 2066 ja AMD 3/3/4 toega ROG 120 mm adresseeritavad RGB radiaatoriventilaatorid – Seitsmenda põlvkonna Aseteki pump tagab erakordse jahutuse ja minimaalse müra töövahemikuga alates 840 p/min. - Kolm ROG-i disainiga radiaatoriventilaatorit tagavad optimeeritud õhuvoolu ja staatilise rõhu. - ARGB-valgustus NCVM-kattega pumbakaanel ja radiaatoriventilaatoritel annab edasi elegantse ja kaasaegse disaini. - Esteetiline täiendab suurepäraselt ROG-i emaplaate keskpunktist. - Tugevdatud, varrukatega torud pakuvad suuremat vastupidavust.ROG STRIX LC II 360 ARGBLiquid, LGA1200/LGA1700/LGA2011/LGA2011-3/LGA2066Ventilaatori kiirus 800 - 2500 RPM, Õhuvooluhulk 80 mF6an95 valgustase. Radiaatori mõõtmed: 121 x 394 x 27 mm ; Vesiploki mõõt: 80 x 80 x 45 mm ; Ventilaatori mõõdud: 120 x 120 x 25 mm, kaal 2,3 kg

The EK-Quantum Magnitude is the new ultimate bespoke CPU water block from EK that brings the highest cooling performance with the lowest possible flow restriction. The AM4 version of the water block is using a specific combination of flow distribution insert, mounting pressure, and cold plate geometry tailored for the IHS and chiplet layout of AMD AM4 socket processors. Different from any mounting structure used by other water blocks that are usually black and mundane plates, the design accentuates an integrated H-shaped, three-dimensional frame with premium finishes that firmly cradles the main body in place while the screws are morphed into a sophisticated design detail. Specialized manufacturing techniques were deployed to create this truly unique product. Not a single component of Magnitude was made using mass production techniques; instead, every single piece was CNC machined separately, out of a solid piece of material. This version of the water block features a nickel-plated copper cold plate with a nickel-plated top CNC machined out of hard-wearing brass. A CNC machined solid brass insert made it possible to significantly enlarge and optimize the cooling engine. Compared to previous generations of water blocks, the fin array has a 50% bigger surface area, all contained in a smaller footprint to ensure maximum compatibility even with mITX motherboards. The copper cold plate uses 0.40mm wide microchannels and 0.26mm thick microfins to maximize the thermal transfer with minimal flow restriction. Since EK-Quantum Magnitude was engineered from the ground up for each specific socket, the AM4 version features an offset insert that directs more flow over the AMD Ryzen CPU chiplets with the I/O die still getting plenty of flow to keep it cool. The aesthetic interchangeable inner frame is also machined out of a single piece of brass, which is subsequently nickel-plated. The aesthetic frame can be replaced with color-anodized aluminum variants that perfectly match EK-Quantum Torque fitting lineup or with a white POM acetal piece that can be used as a light dispersion element for addressable D-RGB LEDs. The aesthetic interchangeable inner frames are sold separately. The mounting mechanism is a three-dimensional H shaped aluminum piece that makes the screws a seamless part of the water block. Strong edges and chamfers root this award-winning icon firmly among the EK-Quantum line. Did we say award-winning? EK-Quantum Magnitude is bearing the prestigious iF Design award for its bold and different approach to the CPU water block mounting mechanism. The cold plate of the Magnitude water block is intentionally machined into a convex shape to align with the concave shape of the CPU IHS. However, if you are interested in a flat cold plate that works perfectly with lapped CPUs or aftermarket IHSs, EK is providing a special, flat bare copper as well as nickel-plated copper cold plates that are sold separately. The Magnitude is supplied with an additional, thicker jet plate. If the user concludes that his CPU IHS is exceptionally concave (poor thermal paste spread after mounting), the curvature of the water block cold plate can be adjusted by using this secondary jet plate. It will make the center of the contact area bow by an additional 0.1mm outwards, for it to make better contact with the IHS. CPU socket compatibility: - AMD AM4 Enclosed: - EK-Quantum Magnitude Water Block - Mounting mechanism with all necessary springs, screws, and washers - AMD AM4 Socket compatible backplate - Additional jet plate - 0.6P - Thermal Grizzly Hydronaut (1.0g) Thermal Paste - Allen (Hex) key - 2.5mm Made in Slovenia, EU

Type: Reservoir with pump, Material: POM, Plexiglas, Capacity: 300ml, Connections: G1 / 4 ", Pump: 8-24V, 1135l / h, 4.5m, Dimensions (WxHxD): 87x310x94mm, Color: clear, black , Color property: transparent, matt, Special features: incl. Mount, RGB lighting, CL-W187-PL00SW-A

Vernickelter Full-Block-Wasserkühler, für Gigabyte Aorus GeForce RTX 3080/3090 (Xtreme/Master), mit Acrylglas-Deckel und Aluminium-Backplate, integrierte digitale RGB-LED-Beleuchtung, kompatibel mit diverser RGB-Software, inklusive Wärmleitpaste und -pads

NZXT vesijahutus Kraken 360 RGB LCD valge