Adressierbare Wing-Boost-3-Lüfter von Alpenföhn, Triple-Set mit 3x 120 mm, digital adressierbare RGB-LED-Beleuchtung (3-Pin), PWM-gesteuert, inklusive Fernbedienung, Empfänger, Splittern & Schrauben
ARCTIC MX-6. Tüüp: Thermal grease, Toote värv: Hall, Maksimaalne kasutamistemperatuur: 150 °C. Kaal: 2 g. Kogus pakis: 1 tk, Pakendi laius: 23 mm, Pakendi sügavus: 152 mm
The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility: - KFA² GeForce RTX 3070 Ti SG (1-Click OC), 8GB GDDR6X, HDMI, 3x DP Technical data cooler L x W x H 214,59 x 123,23 x 24,35 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 11 Technical data backplate L x W x H 214,59 x 98,83 x 6 mm Material aluminium Color black
MASTERLIQUID 240 ATMOS WHITE AIO LIQUID COOLER Cooler Master is unveiling the next generation of liquid cooling engineering with the MasterLiquid 240 Atmos White, our new AIO liquid cooler, now available in an ice-cool white colorway. With the Atmos series, we are introducing a multitude of modern designs and features. Our signature dual chamber pump has been refined for enhanced cooling synergy. The latest SickleFlow Edge ARGB fans are included to silently improve air flow and are preinstalled to simplify installation and the overall user experience. The pump cover is manufactured from eco-friendly recycled plastics and features a transparent, removable top cover that you can customize with your own logo or badge. The Atmos supports Addressable Gen 2 RGB for the most versatile and vibrant lighting, compatible with both our MasterPlus and MasterControl software. Cooler Master is leaping into the future with the Atmos series.
The nickel-plated adapter from Bitspower in shiny silver has two G1/4 inch external threads. The adapter is rotatable, so that the screwing on is not unnecessarily complicated. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Silver Thread: G1/4" on both side Thread Length: 5mm
The None Chamfer Brass Hard Tube in white from Bitspower, is made of brass. With this durable tube, as well as the stylish color, high-quality and unique water cooling can be created. As with other Hard Tubes, the tube can be cut or bent for the WaKü. The latter however with tube bending tool and for experienced hobbyists. As a rule, the None Chamfer does not need to be reworked when it is cut. The tube measures 300mm in length, 16mm in outer diameter and 14.6mm in inner diameter. It has a wall thickness of 0.7mm and is therefore very stable. C47, C48 and the ML series from Bitspower are compatible as connectors. Technical Data: Material: Brass Color: White Material Thickness: 0.7 mm Outer Diameter: 16 mm Inner Diameter: 14,60 mm Length: 300 mm Compatibility: C47, C48 & ML series Bitspower connectors only
Tootekood: BP-NCCLT12AC-L1000GTIN: 4719552222933Jahutid ja lisad
Toote kirjeldus inglise keeles:With the Crystal Link Tubes, Waku specialist Bitspower presents a very interesting solution for water enthusiasts who are not completely unskilled in their craft. These are solid tubes of acrylic plastic, which can be cut by the user to the required length and bent with the aid of a heat source suitable. The resulting possible connection of the individual water cooling parts with longer dead straight sections and exactly curved radii is a visually appealing alternative to the traditional connection by means of hoses dar. For example, if you use a hot air gun and the acrylic tube heated with it for some time, the material is so soft that one It can easily bend into the desired radius and holds as long until the acrylic has cooled and the now bent tube hardens again. It does not get any more individual Everything you need can be created here and even adjusted later. Ideally, in addition to a hot air gun and gloves you have a silicone rod (or something similar flexible, but heat-resistant) to hand, which one pushes into the tube in advance, so that the soft tube gets no kink when bending. The transparent-blue Crystal Link Tube offered here has an outer diameter of 12 mm and an inner diameter of 10 mm. The length is 100 cm. It can be used in conjunction with bit-power adapter fittings from the C47, C48 and ML series. Technical details:Material: acrylic glass (PMMA)Colour blueOuter diameter: 12 mmInner diameter: 10 mmLength: 1,000 mmCompatibility: C47 Series Bit Power Fittings and Adapters C48 Bit Power Fittings and Adapters C48 Series Bit Power Fittings and Adapters
360-mm-Radiator von Corsair, Kupfer- und Messing-Aufbau, bis zu sechs 120-mm-Lüfter in Push/Pull-Konfiguration, 30 Millimeter Dicke und 16 FPI, 2x G1/4-Anschlüsse
Alphacool stellt die neuste Generation des Eisblock Aurora Wasserkühlers für Radeon RX 7XXX Grafikkarten vor. Der Wasserkühler wurde optimiert, um die enormen Abwärme-Eigenschaften dieser Grafikkartengeneration bestmöglich abzuführen. Die Finnenstruktur wurde angepasst und die Düsenplatte modifiziert, um einen besseren Wasserdurchfluss und eine optimale Verteilung des Wassers auf den Kühlfinnen zu ermöglichen. Technische Highlights Die Finnendicke dieser Eisblock-Kühlergeneration beträgt 0,4 mm, ebenso wie der Abstand der Kühlfinnen zueinander. Die Düsenplatte verfügt über ein überarbeitetes Inlay, das den Wasserdruck besser auf die Finnen verteilt und die Wärmeaufnahme optimiert. Der angepasste Wasserzufluss verhilft dem Wasser zu einem besseren Einströmwinkel. Verchromtes Kupfer Der Kühlerboden besteht vollständig aus verchromtem Kupfer, was unempfindlicher gegenüber Säuren, Kratzern und Schäden ist als eine Vernickelung. Verchromte Kühler wurden bisher nur im Industriesektor eingesetzt, um extreme Einflüsse auf die Kühler zu bewältigen. Zusätzlich sieht die Verchromung wesentlich homogener aus und bietet einen Glanz, der durch eine Vernickelung nicht erreicht werden kann. Design Das Aurora-Design der Radeon RX 7XXX Eisblock-Generation ist optisch ruhiger und schlichter. Der Kühler wird von einem einzigen O-Ring umschlossen. Die Konstruktion rund um die Kühlfinnen und der Jetplate sorgt für eine klarere Optik. Die Beleuchtung der digital adressierbaren RGB-LEDs wird dank der Verchromung noch besser im Kühler verteilt. Das Terminal entspricht in seiner Formgebung dem klassischen Aurora Design. Wärmeleitpaste & Wärmeleitpads Im Lieferumfang ist Alphacool's Subzero Wärmeleitpaste enthalten, die zu den leistungsstärksten Wärmeleitpasten auf dem Markt gehört. Zusätzlich werden Alphacool Soft Pads mit einer Dicke von 1 mm für die Spannungswandler und den Grafikspeicher verwendet. Die Pads für die Rückseite des PCB sind 3 mm dick. Die Wärmeleitfähigkeit der Pads liegt bei 7 W/mK bzw. 3 W/mK. Das elektrisch nicht leitende Thermal Grease ist besonders gut geeignet für hohe Anpressdrücke und lässt sich aufgrund der Viskosität von 850.000 TF trotzdem perfekt verarbeiten. Kompatibilität: - PowerColor Radeon RX 7900 XTX Red Devil, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC) - PowerColor Radeon RX 7900 XTX Red Devil Limited Edition, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC/LIMITED Technische Daten Kühler Abmessungen (L x B x H) 285,50 x 144,50 x 34,20mm Material Kühlerboden verchromtes Kupfer Material Kühleroberseite Acryl Anschlüsse 4 x G1/4" Dicke Kühlfinnen 0,4mm Abstand Kühlfinnen 0,4mm Beleuchtung digital aRGB LEDs Stromanschluss digital aRGB LEDs 3-Pin JST Spannung digital aRGB LEDs 5V Anzahl digital aRGB LEDs 15 Farbe transparent Technische Daten Backplate Abmessungen (L x B x H) 285,50 x 120,00 x 6mm Material Aluminium Farbe schwarz
The CORSAIR Hydro X Series XR5 140 mm Water Cooling Radiator delivers extreme custom cooling performance, with an 30 mm radiator thickness and premium copper core.
The Black Ice® Nemesis® GTX radiators are the next generation of computer radiators from Hardware Labs. These radiators offer an improved cooling performance when using
The Eisblock XPX Aurora Edge is a powerful CPU cooler that shows its strength especially on multi-core processors with 4, 6, 8, 12 and more CPU cores. The total area of the cooling channels on the CPU cooler base is 34 x 32 mm. This means that the Eisblock XPX Aurora Edge cooler also copes with large CPU DIEs. Performance in overflow! The Eisblock XPX Aurora Edge has a special injection technology that was developed and patented by Alphacool itself. The so-called "ramp system" is located in front of the nozzle plate and ensures an even flow of water within the cooler. The water is pressed through the nozzle plate in a controlled manner and distributed evenly over the cooler base. The radiator bottom itself has 81 cooling fins with a fin structure of only 0.2 mm per fin. In this way, the largest possible surface area has been created in the available space in order to dissipate the CPU's waste heat to the water as quickly as possible. Lighting Behind the Alpahcool logo, 2 digitally addressable 5V RGB LEDs are installed, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the digital RGB lighting, the enclosed adapter must be connected to the 3-pin female connector and connected to a digital RGB controller or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Discreet appearance The matt finish gives the cooler, which is made entirely of brass (except for the cooler bottom), a noble look. This makes it interesting for users who prefer a discreet appearance and want to do without a complex aRGB illumination. Thermal grease The thermal paste included in the delivery is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive thermal grease is particularly suitable for high contact pressures, but can still be processed perfectly due to its viscosity of 850000 TF. Compatibility: Compatibility Intel: LGA 115x / 1200 / 1700 / 2066 AMD Compatibility: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data L x W x H 70 x 70 x 32,5mm Material cooler nickel plated copper Material bottom part brass Material top brass Number of aRGB LEDs 2 Threads 2 x G1/4“ Power supply Digital aRGB 3-Pin 5V Pressure tested 0,8 bar Max working temperature 60°C Net weight 694g Color chrome
Tootekood: CR-3000E COLOR BLACKGTIN: 6970620554068Jahutid ja lisad
Extrem leistungsfähiger Dual-Tower-Kühler mit 260 W TDP Sechs 6-mm-Heatpipes 2x PWM-Lüfter im 120-mm-Format Hohe Kompatibilität zu AMD und Intel Halterung für einfache Montage Integrierte Beleuchtung an Lüftern und Rahmen Der Jonsbo CR-3000E CPU-Kühler: Der Jonsbo CR-3000E CPU-Kühler bietet durch seine sechs Heatpipes und den PWM-Lüfter eine extrem hohe Kühlleistung. Der außerdem sehr leise Kühler besitzt mit 260 W TDP immense Kühlreserven für übertaktete CPUs und lässt sich trotz seiner Größe auch bei installiertem Mainboard montieren. Schlichtes Design mit starker Kühlleistung Beim CR-3000E handelt es sich um einen leistungsfähigen Dualturm-Kühler, der durch seine beiden Lüfter eine sehr effiziente und leise Kühlung ermöglicht. Die laufruhigen Lüftermotoren sorgen dabei für reduzierte Vibrationen und in Verbindung mit dem Lager für eine sehr lange Haltbarkeit. Perfekte Kühlung für deine CPU inklusive Lichteffekten Dank sechs Hochleistungs-Heatpipes gewährleistet der Kühlkörper einen exzellenten Wärme-Abtransport. Die Lamellenfläche des Kühlers ist durch das Dualturm-Design sehr groß, sodass besonders viel Wärme an die durchströmende Luft weitergegeben werden kann. Zusätzlich ist noch eine Beleuchtung verbaut, die dein Setup aufwertet und für einen extra hingucker sorgt.
The nickel-plated adapter in the color shiny black couples two tubes, which do not run on a common straight line and provides at the adapter for a bend of 90 degrees. Two rubber rings seal both sides. The adapter is especially well compatible with Bitspower's Crystal Link Tubes. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Angle: 90 ° Connections: 2x Ø 12 mm
The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 socket. With the optional XPX Pro AM4 mounting bracket, the Alphacool Eisbaer Pro CPU cooler can also be used on AMD Ryzen processors. Large cooling surface The cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. With the included AM4 bracket, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible. Copper radiator As per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen. Real water cooling The Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system. Fan and lighting The entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of course all Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible. How to connect everything The fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard. The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market. Data radiator L x W x H 390 x 120 x 30 mm (+/- 3%) Material cooling fins Copper Material chambers Copper Material cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Data cooler and pump L x W x H 64 x 79 x 54,3 mm Number of LEDs 10x Digital RGB LEDs Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ (+ 1x Fillport G1/4“) Pump typ DC-LT Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Voltage 12V DC Power consumption 4W MTBF 50.000 h Data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Net weight 187 g Max working temperature 60 °C Certificates CE, FC, ROHS Compatibility list: - Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189 - AMD: AM4 / TR4 / sTRX4 / SP3 / sWRX8
Verlängerungsadapter von Bitspower Touchaqua, G1/4 Zoll AG auf Link Tube, Female Adapter, längenverstellbar 16 bis 22 mm, 2er-Pack, Silber (Glorious Silver)
EK Water Blocks EK-Torque STC-16/12 color ring pack of 10, black. These exchangeable rings for the 16 / 12mm Soft-Tube compression fittings from EKWB are made of aluminum, are available in different colors and give your system a unique look. Compatibility: EK-Quantum Torque STC-16/12 connections Technical specifications: Color: Black Material: aluminum Quantity: 10 pieces
Kühlblock und Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung
Tootja: AKYGA Tootegrupp: ventilaator korpustele Fan's size class: 120 mm ventilaatori laagri tüüp: liugelaager ventilaatori pöördekiirus: 0-1300 pööret minutis ventilaatori müratase: 0-20 dB laius: 120 mm kõrgus: 120 mm paksus: 25 mm toite ühenduse tüüp: 3-pin, 4-pin Termistor: Ei vastupidavus: 30000 tundi õhuvool: 0-1100000 cm3/min LED kogus: 15 tk LED värv: Red Lisaandmed: anti-vibration pads Lisainfo: Product Site
Schwarzer 240-mm-Radiator von Magicool, aus der G2-Ultra-Reihe mit 45 mm Dicke, für beidseitig 2x 120-mm-Lüfter, 13 FPI Lamellendichte für Silent-Fans, Dual-Pass-Design
FQ141 represents SilverStone’s pursuit of a design that balances performance and tranquility. Its included PWM module allows motherboard to control fan speed and regulate the temperature inside your chassis with optimal efficiency. It has custom designed dual fan blades for increased air pressure performance without additional noise. These features not only improve ventilation but also decrease operating noise.SobilikArvuti korpusTüüpVentilaatorVentilaatori läbimõõt14 cmToetatud protsessoripesadEi ole toetatudÜhilduvad protsessoriseeriadEi ole toetatudPöörlemiskiirus (min)500 RPMPöörlemiskiirus (max)1000 RPMMüratase (aeglane kiirus)14,7 dBMüratase (suur kiirus)20,7 dBMinimaalne õhuvool31,4 cfmMaksimaalne õhuvool62 cfmMinimaalne õhusurve0,28 mmH2OMaksimaalne õhusurve1,21 mmH2OKeskmine tõrkeintervall (MTBF)150000 hToote värvSinine, ValgeMaterjalPlastPinge12Nimivool0,11 AVentilaatori mõõdud (laius x sügavus x kõrgus)140 x 140 x 25 mmVentilaatori kaal133 g
The Protium expansion tank from Singularity Computers is a 100mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 139mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 139 mm (L x W x H) Diameter: 60 mm Material: Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Silver, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 100 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
The transparent lid made of matt acrylic fits all Protium reservoirs from Singularity. It has four G1/4" connections and, due to its design, can be integrated into the water cooling circuit in a variety of ways. Technical Data Colour: Transparent Material: Acryl (matt) Thread: 4x G1/4" Compatibility: Protium reservoir
All-in-One water cooling from InWin, 360mm radiator with integrated pump, fan, and cooling block with integrated RGB lighting, high compatibility with Intel and AMD sockets.
