Jahutid ja lisad

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.   Compatibility: - ASRock Radeon RX 7900 XT Taichi OC, RX7900XT TC 20GO, 20GB GDDR6, HDMI, 3x DP - ASRock Radeon RX 7900 XTX Taichi OC, RX7900XTX TC 24GO, 24GB GDDR6, HDMI, 3x DP, HDMI - ASRock Radeon RX 7900 XT Phantom Gaming OC, RX7900XT PG 20GO, 20GB GDDR6, HDMI, 3x DP (90-GA3XZZ-00UANF) - ASRock Radeon RX 7900 XTX Phantom Gaming OC, RX7900XTX PG 24GO, 24GB GDDR6, HDMI, 3x DP, HDMI   Technical data radiator Dimensions (L x W x H) 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Options for fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump Dimensions (L x W x H) 274,10 x 161,15 x 47,52 mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners Dimensions (L x D) 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions (L x W x H) 120 x 120 x 25mm Net weight 187g Max working temperature 60°C

Noctua NF-A9X14 HS-PWM CH.BK.S computer cooling component Computer case Fan 9.2 cm must

Gigabyte Aorus WaterForce X II 360 Ice

Alphacool Eisblock Aurora water cooler for Geforce RTX 4XXX graphics cards.

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.   Compatibility: - Sapphire Nitro+ Radeon RX 7900 XT Vapor-X, 20GB GDDR6, 2x HDMI, 2x DP (11323-01-20G) - Sapphire Nitro+ Radeon RX 7900 XTX Vapor-X, 24GB GDDR6, 2x HDMI, 2x DP (11322-01-20G)   Technical data radiator Dimensions (L x W x H) 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Options for fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump Dimensions (L x W x H) 276,70 x 151,05 x 46,10 mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners Dimensions (L x D) 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions (L x W x H) 120 x 120 x 25mm Net weight 187g Max working temperature 60°C

360 mm großer Radiator für Wasserkühlungen, für High-End-Hardware, aus Kupfer, hohe Finnendichte

Deepcool AK620 Zero Dark Zoria

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.   Compatibility: - ASUS TUF Gaming GeForce RTX 3080 Ti 12GB OC - ASUS TUF Gaming GeForce RTX 3080 OC, TUF-RTX3080-O10G-GAMING - ASUS TUF Gaming GeForce RTX 3080, TUF-RTX3080-10G-GAMING - ASUS TUF Gaming GeForce RTX 3090, TUF-RTX3090-24G-GAMING - ASUS TUF Gaming GeForce RTX 3090 OC, TUF-RTX3090-O24G-GAMING   Data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins Copper Material chambers Copper Material cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Data cooler and pump L x W x H 238 x 142,1 x 46 mm Material cooler bottom Chrome plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Data quick fasteners L x D 95 x 27 mm Material Nylon For tube size 12,7 / 7,6 mm Color Black Data fittings L x D straight fitting 24 x 18 mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17 mm Quantity 90° fittings 2x For tube size 12,7 / 7,6 mm Material fittings Brass Data tube Length 50 cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6 mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Net weight 187 g Max working temperature 60 °C

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool GPX Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.   Compatibility: RTX 3080 TI - Gainward GeForce RTX 3080 Ti 12GB Phoenix - INNO3D GEFORCE RTX 3080 TI ICHILL X4 - INNO3D GEFORCE RTX 3080 TI ICHILL FROSTBITE - INNO3D GEFORCE RTX 3080 TI ICHILL X3 - INNO3D GEFORCE RTX 3080 TI X3 - INNO3D GEFORCE RTX 3080 TI X3 OC - Palit GeForce RTX 3080 Ti GamingPro - Zotac Gaming GeForce RTX 3080 Ti AMP Holo - Zotac GeForce RTX 3080 Ti AMP HoloBlack - Zotac Gaming GeForce RTX 3080 Ti Trinity - Zotac Gaming GeForce RTX 3080 Ti Trinity OC RTX 3080 - Galakuro NVIDIA GEFORCE RTX 3080 GG-RTX3080-E10GB/TP - Galax GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI - Gainward RTX 3080 Phoenix - Gainward RTX 3080 Phoenix GS - Inno3D GeForce RTX 3080 iChill X3/X4 10240 MB GDDR6X - Inno3D GeForce RTX 3080 Twin X2 OC 10240 MB GDDR6X - INNO3D GEFORCE RTX 3080 12GB ICHILL FROSTBITE LHR - INNO3D GEFORCE RTX 3080 12GB X3 OC LHR - INNO3D GEFORCE RTX 3080 12GB ICHILL X3/X4 LHR - INNO3D GEFORCE RTX 3080 12GB ICHILL BLACK LHR - KFA2 GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI - Palit GeForce RTX™ 3080 GamingPro - Palit GeForce RTX™ 3080 GamingPro OC - PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXMPB) - PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXPPB) - Zotac GAMING GeForce RTX 3080 Trinity - Zotac Gaming GeForce RTX 3080 Trinity OC RTX 3090 - Galakuro NVIDIA GEFORCE RTX 3090 GG-RTX3090-E24GB/TP - Galax GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI - Gainward RTX 3090 Phoenix - Gainward RTX 3090 Phoenix GS - Inno3D GeForce RTX 3090 iChill X3/X4, 24576 MB GDDR6X - Inno3D GeForce RTX 3090 Gaming X3, 24576 MB GDDR6X - KFA2 GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI - Palit GeForce RTX™ 3090 GamingPro - Palit GeForce RTX™ 3090 GamingPro OC - PNY GeForce RTX 3090 XLR8 Gaming EPIC-X RGB, 24576 MB GDDR6X - Zotac GeForce RTX 3090 Trinity, 24576 MB GDDR6X   Data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins Copper Material chambers Copper Material cooling channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Data cooler and pump L x W x H 130 x 225 x 46 mm Material cooler bottom Chrome plated copper Material cooler top PMMA Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Data quick fasteners L x D 95 x 27 mm Material Nylon For tube size 12,7 / 7,6 mm Color Black Data fittings L x D straight fitting 24 x 18 mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17 mm Quantity 90° fittings 2x For tube size 12,7 / 7,6 mm Material fittings Brass Data tube Length 50 cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6 mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25 mm Net weight 187 g Max working temperature 60 °C

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.   Compatibility: - MSI GeForce RTX 3090 Ti Suprim X 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 3090 Ti Gaming X Trio 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 3090 Ti Gaming Trio 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 3090 Ti Suprim 24G, 24GB GDDR6X, HDMI, 3x DP   Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 265,8 x 162,5 x 46mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners L x D 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25mm Net weight 187g Max working temperature 60°C

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.   Compatibility: - EVGA GeForce RTX 3090 Ti FTW3 Ultra Hydro Copper Gaming (24G-P5-4989-KR) - EVGA GeForce RTX 3090 Ti FTW3 Ultra Hybrid Gaming (24G-P5-4988-KR) - EVGA GeForce RTX 3090 Ti FTW3 Ultra Gaming (24G-P5-4985-KR) - EVGA GeForce RTX 3090 Ti FTW3 Gaming (24G-P5-4983-KR) - EVGA GeForce RTX 3090 Ti FTW3 Black Gaming (24G-P5-4981-KR)   Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 289,46 x 159,85 x 46mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners L x D 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25mm Net weight 187g Max working temperature 60°C

The Alphacool Eiswolf 2 is the first full cover GPU AIO waterblock from Alphacool. It is based on the Alphacool Eisblock Aurora GPX water block, a pump unit and a 360mm NexXxoS ST30 full copper radiator. The latter is equipped with the Alphacool Aurora Rise Digital RGB fans. Fullcover Waterblock? The Eiswolf 2 graphics card AIO water block not only cools the GPU with liquid but also all relevant components that require active cooling. This includes the graphics memory, the VRM and, if necessary, other components that require direct cooling. By using the Eisblock GPX Aurora water cooler, the cooling capacity is identical to that of a DIY graphics card water cooler. Pump The Eiswolf 2 has a pump unit in place of the normal connection terminal. This pump unit houses the DC-LT 2 pump. An improved and quieter version of the well-known DC-LT Low Noise Ceramic Pump. Despite looking rather large, the pump unit is only 5 mm wider than a normal connection terminal. Fittings and Tubing As with all new AIO units, Alphacool uses only TPV hoses from the Enterprise Solution range for (usually reserved for servers and workstations) in the Eiswolf 2. The tubing is made of EPDM/PP and are extremely heat-resistant, durable, and free of plasticizers. All fittings are also based on the Enterprise Solution range and match the TPV hoses perfectly. Expandability By using the quick-release fastener, the Eiswolf 2 can be connected to another Alphacool AIO unit to achieve a larger loop in seconds. Alphacool offers various prefilled components with which the loop can be easily extended. For safety reasons, the quick-release fasteners are firmly screwed together and not just plugged together. Lighting and fans The Eiswolf 2 cooler has a digital RGB LED lighting, also called addressable RGB LEDs. They run along the entire back of the graphics card cooler and provide complete illumination of the water cooler. The pump unit is more discreet and offers a green glowing logo for Nvidia and a red glowing logo for AMD cards. The name "Eiswolf" on the pump unit remains unlit, discreetly in the background. The fan used is the Aurora Rise with 120mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. static pressure of 3.17mm/H2O and offers a max. air flow of 119.8m3/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. NexXxoS Radiator As with all AIO units, Alphacool uses radiators from the world renowned NexXxoS series. The full copper radiators offer a much higher cooling capacity than aluminium radiators and have contributed significantly to Alphacool's worldwide success. The combination of all of the components results in a solution that is as simple as an AIO solution to install, but with the performance of a pre-assembled and prefilled custom loop. Technical note! Due to long storage times and various transport routes, the liquid in the Eiswolf 2 AIO remains still for a long time. The ingredients of the liquid can therefore deposit and lead to a brownish discoloration. As soon as the pump starts operating, the ingredients mix again and the liquid should regain an approximately clear color. This is not a reason for complaint as neither the performance nor the function of the AIO are restricted by this. If the discolouration of the cooling liquid does not disappear after the AIO has been put into operation, please contact our support team via E-Mail (info@alphacool.com). You will receive quick and uncomplicated help there.   Compatibility: - GeForce RTX™ 3090 Ti ROG Strix LC 24GB (90YV0HC2-M0NA00) - GeForce RTX™ 3090 Ti ROG Strix LC OC Edition 24GB (90YV0HC0-M0NA00) - GeForce RTX™ 3090 Ti TUF Gaming 24GB (90YV0HC3-M0NA00) - GeForce RTX™ 3090 Ti TUF Gaming OC 24GB (90YV0HC1-M0NA00)   Technical data radiator L x W x H 395 x 124 x 30mm (+/- 3%) Material cooling fins, chambers & channels Copper Material threads Brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes (+ 1x Fillport G1/4“) For fan size 120 mm Possible fan assembly 3 x one-sided / 6 x both-sided Technical data cooler and pump L x W x H 267 x 161,84 x 48,23mm Material cooler bottom Chrome plated copper Material cooler top acrylic Threads 2 x G1/4“ Pump type DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 1 m Maximum flow rate 72 L/h Voltage 6-13.5V DC Power consumption 3.2W MTBF 50.000 h Technical data liquid Color clear Ingredient 1 Destilled water (CAS-number 7732-18-5) Ingredient 2 Glysantin (CAS-number 1017-21-1) Working temperatures -15 C° / +90 °C Technical data quick fasteners L x D 95 x 27mm Material Nylon For tube size 12,7 / 7,6mm Color Black Technical data fittings L x D straight fitting 24 x 18mm Quantity straight fittings 2x L x B x H 90° fitting 35 x 27 x 17mm Quantity 90° fittings 2x For tube size 12,7 / 7,6mm Material fittings Brass Technical data tube Length 50cm Material tube TPV (EPDM/PP) Color Matt black Tube size 12,7 / 7,6mm Hardness grade 35 Shore-A to 50 Shore-D Working temperature -50 to +155 °C Technical data fan Speed 0 - 2500 RPM Static pressure 3,17 mm H2O Air flow rate 119,8 m³/h Bearings Sleeve bearing Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 120 x 120 x 25mm Net weight 187g Max working temperature 60°C

The next generation - the Alphacool Eisblock Aurora water cooler for Radeon RX 7XXX graphics cards. In order to dissipate the enormous heat of this graphics card generation in the best possible way, numerous optimizations have been made to the water cooler compared to the previous model. The fin structure was adapted and enables a very good water flow while increasing the cooling surface. The modified jet plate with improved inflow engine ensures an optimal distribution of the water on the cooling fins. Technical Highlights The fin structure of this Eisblock cooler generation was developed together with AMD board partners. The fin thickness is 0.4 mm, the distance between the cooling fins is 0.4 mm. This ensures a very good water flow while increasing the cooling surface. The jet plate has a revised inlay that spreads the water pressure better over the fins thus optimizing the heat absorption. The adjusted water inflow gives the water a better angle of inflow. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Design The Aurora design of the Radeon RX 7XXX Eisblock generation is visually calmer and simpler. Only one O-ring runs around the entire cooler. The design around the cooling fins and jetplate makes for a cleaner look. The illumination of the digitally addressable RGB LEDs is even better distributed throughout the cooler as a result of the chrome plating. The terminal's design is in line with the classic Aurora design. Thermal paste & thermal pads The included thermal compound is Alphacool's Subzero. With a thermal conductivity of 16 W/mK, it is one of the highest performing thermal pastes on the market. The electrically non-conductive thermal compund is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850.000 TF. Alphacool Soft Pads with 1mm thickness are used on the voltage converter and the graphics memory. The thermal conductivity of the pads is 7 W/mK. The pads for the back of the PCB are 3mm thick and have a thermal conductivity of 3 W/mK.   Compatibility: - ASRock AMD Radeon™ RX 7900 XT Taichi - ASRock AMD Radeon™ RX 7900 XTX Taichi - ASRock AMD Radeon™ RX 7900 XT Phantom - ASRock AMD Radeon™ RX 7900 XTX Phantom   Technical data cooler L x W x H 274,1 x 144,56 x 34,54mm Material cooler chrome-plated copper Material cooler top acrylic Threads 4 x G1/4" Thickness cooling fins 0,4mm Distance cooling fins 0,4mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 14 Technical data backplate L x W x H 274,1 x 133,56 x 6mm Material aluminium Color black

Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances. Compatibility:- XFX Speedster MERC 310 Radeon RX 7900 XT Black Edition, 20GB GDDR6 (RX-79TMERCB9)- XFX Speedster MERC 310 Radeon RX 7900 XT, 20GB GDDR6 (RX-79TMERCU9)- XFX Speedster MERC 310 Radeon RX 7900 XTX Black Edition, 24GB GDDR6 (RX-79XMERCB9) Technical data coolerDimensions (L x W x H)289,60 x 134,80 x 32,20mmMaterial coolerchrome-plated copperMaterial cooler topacrylicThreads4 x G1/4"Thickness cooler bottom11,3mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs17ColortransparentTechnical data backplateDimensions (L x W x H)289,60 x 111,80 x 5mmMaterialaluminiumColorblackWarranty: 3 years???? Warranty Terms

With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity.   Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5   Technical data radiator L x W x H 153 x 120 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 19 Fan size 120mm Fan slots 1 one-sided / 2 double-sided Color black Technical data fans L x W x H 120 x 120 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.23 (Max. 0.4) A Rated Power 2.76 (Max. 4.8) W Rated Speed 0 - 2500rpm/min (±10%) Max. Air Flow 62.8CFM Max.Static Pressure 2.13mm-H2O Noise level (rated voltage, mute room, distance 1m) 33.0 (Max. 34.3) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 350mm

Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances. Compatibility:- PowerColor Radeon RX 7900 XTX Red Devil Limited Edition, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC/LIMITED)- PowerColor Radeon RX 7900 XTX Red Devil, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC) Technical data coolerDimensions (L x W x H)287,21 x 146,10 x 32,20mmMaterial coolerchrome-plated copperMaterial cooler topacrylicThreads4 x G1/4"Thickness cooler bottom11,3mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs16ColortransparentTechnical data backplateDimensions (L x W x H)287,21 x 123,10 x 5mmMaterialaluminiumColorblackWarranty: 3 years???? Warranty Terms

With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity.   Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5   Technical data radiator L x W x H 279 x 120 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 19 Fan size 120mm Fan slots 2 one-sided / 4 double-sided Color black Technical data fans L x W x H 120 x 120 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.23 (Max. 0.4) A Rated Power 2.76 (Max. 4.8) W Rated Speed 0 - 2500rpm/min (±10%) Max. Air Flow 62.8CFM Max.Static Pressure 2.13mm-H2O Noise level (rated voltage, mute room, distance 1m) 33.0 (Max. 34.3) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm

Big is Good. Bigger is Better! Make No Compromises, Use Copper.As usual, Alphacool also uses pure copper for the NexXxoS 400 mm XT45 Radiator. The end chambers, water channels and cooling fins are all made of copper and are a unique selling point worldwide. As a result, Alphacool radiators have been among the most popular and best on the market for many years, providing the perfect foundation for every water cooling system. Full Cooling CapacityTo maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(mK) for copper compared to 236 W/(mK) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result, especially for such large radiators, is a fin spacing of 12 FPI. This means that the air flow is almost unobstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise. Which fans?The 400 mm XT45 radiator offers space for a 200 mm fan with 154 or 165 mm mounting holes on the mounting frame. The fans are screwed onto a mounting frame which can also be removed for purely passive operation in order not to obstruct the natural airflow. Connection optionsThe Alphacool NexXxoS 400 mm XT45 radiator offers four G1/4" threads for IN and OUT. A further G1/4" thread on the back of the radiator serves as a fill port. Alternatively, a temperature sensor or a drain port can also be attached here. Small was yesterday. With a cooling area of 40 x 20 cm the 400 mm XT radiator offers more cooling surface than a 560 mm radiator. This is more than enough cooling power to cool every CPU and every graphics card in a loop. Technische Daten:L x W x H: 440 x 200 x 48 mmNet weight: 1725 gMaterial cooling fins: copperMaterial cooling channels: copperPrechamber material: copperMaterial outer housing: steelFins per Inch: 12Threads: 7 x G1/4“Thread size fan mounting: M3Fan size: 200 mmFan slots: 2Pressure tested: 0,8 barCertificates: CE, FC, RoHSDownload data sheet PDF: Alphacool NexXxoS XT45 Full Copper 400mm Radiator

With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity.   Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5   Technical data radiator L x W x H 397 x 120 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 19 Fan size 120mm Fan slots 3 one-sided / 6 double-sided Color black Technical data fans L x W x H 120 x 120 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.23 (Max. 0.4) A Rated Power 2.76 (Max. 4.8) W Rated Speed 0 - 2500rpm/min (±10%) Max. Air Flow 62.8CFM Max.Static Pressure 2.13mm-H2O Noise level (rated voltage, mute room, distance 1m) 33.0 (Max. 34.3) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm

Alphacool is an internationally renowned company in the field of water cooling solutions for both industrial and home users. To ensure that customers receive the best products available, Alphacool is constantly developing new products and making improvements to existing products. Make No Compromises, Use Copper. As usual, Alphacool uses pure copper for the NexXxoS ST25 slim radiators. The end chambers, the water channels and the cooling fins are all made of copper, a unique selling point worldwide. No other manufacturer relies on pure copper for all these components combined. As a result, Alphacool has been producing one of the most popular and highest performing radiators on the market for many years, providing the perfect foundation for every water cooling system. Full Cooling Capacity To maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(mK) for copper compared to 236 W/(mK) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result is a fin spacing of 15 FPI. This means that the air flow is only slightly obstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise. Compact The ST25 slim radiators offer the ideal liquid cooling solution for Mini-PCs or SSF (Small Form Factor) systems. Due to the extremely flat design, the NexXxoS ST25 radiators are ideal for such small cases and due to the reduced size, they give you the extra space you need to work in the case. Technical data: LxWxH: 151 x 120 x 25,5 mm Material: copper Material outer housing: steel Fins per Inch: 15 Threads: 2 x G1/4“ Thread size fan mounting: M3 Fan size: 120 mm Fan slots: 1 single sided / 2 double sided Download data sheet PDF: Alphacool NexXxoS ST25 Full Copper 120 mm radiator

With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2000 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2000 rpm, it provides an air flow of 92.3 CFM, together with a high static pressure of 2.53mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity.   Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5   Technical data radiator L x W x H 315 x 140 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 20 Fan size 140mm Fan slots 2 one-sided / 4 double-sided Color black Technical data fans L x W x H 140 x 140 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.26 (Max. 0.3) A Rated Power 3.12 (Max. 3.6) W Rated Speed 0 - 2000rpm/min (±10%) Max. Air Flow 92.3CFM Max.Static Pressure 2.53mm-H2O Noise level (rated voltage, mute room, distance 1m) 34.3 (Max. 36) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm

Alphacool is an internationally renowned company in the field of water cooling solutions for both industrial and home users. To ensure that customers receive the best products available, Alphacool is constantly developing new products and making improvements to existing products.Make No Compromises, Use Copper. As usual, Alphacool uses pure copper for the NexXxoS ST25 slim radiators. The end chambers, the water channels and the cooling fins are all made of copper, a unique selling point worldwide. No other manufacturer relies on pure copper for all these components combined. As a result, Alphacool has been producing one of the most popular and highest performing radiators on the market for many years, providing the perfect foundation for every water cooling system.Full Cooling CapacityTo maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(mK) for copper compared to 236 W/(mK) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result is a fin spacing of 15 FPI. This means that the air flow is only slightly obstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise.CompactThe ST25 slim radiators offer the ideal liquid cooling solution for Mini-PCs or SSF (Small Form Factor) systems. Due to the extremely flat design, the NexXxoS ST25 radiators are ideal for such small cases and due to the reduced size, they give you the extra space you need to work in the case. Technical data:LxWxH: 272 x 120 x 25,5 mmMaterial: copperMaterial outer housing: steelFins per Inch: 15Threads: 2 x G1/4“Thread size fan mounting: M3Fan size: 120 mmFan slots: 2 single sided / 4 double sided Download data sheet PDF: Alphacool NexXxoS ST25 Full Copper 120 mm radiator

With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2000 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2000 rpm, it provides an air flow of 92.3 CFM, together with a high static pressure of 2.53mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity.   Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5   Technical data radiator L x W x H 460 x 140 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 20 Fan size 140mm Fan slots 3 one-sided / 6 double-sided Color black Technical data fans L x W x H 140 x 140 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.26 (Max. 0.3) A Rated Power 3.12 (Max. 3.6) W Rated Speed 0 - 2000rpm/min (±10%) Max. Air Flow 92.3CFM Max.Static Pressure 2.53mm-H2O Noise level (rated voltage, mute room, distance 1m) 34.3 (Max. 36) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm

Alphacool is an internationally renowned company in the field of water cooling solutions for both industrial and home users. To ensure that customers receive the best products available, Alphacool is constantly developing new products and making improvements to existing products.Make No Compromises, Use Copper. As usual, Alphacool uses pure copper for the NexXxoS ST25 slim radiators. The end chambers, the water channels and the cooling fins are all made of copper, a unique selling point worldwide. No other manufacturer relies on pure copper for all these components combined. As a result, Alphacool has been producing one of the most popular and highest performing radiators on the market for many years, providing the perfect foundation for every water cooling system.Full Cooling CapacityTo maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(mK) for copper compared to 236 W/(mK) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result is a fin spacing of 15 FPI. This means that the air flow is only slightly obstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise.CompactThe ST25 slim radiators offer the ideal liquid cooling solution for Mini-PCs or SSF (Small Form Factor) systems. Due to the extremely flat design, the NexXxoS ST25 radiators are ideal for such small cases and due to the reduced size, they give you the extra space you need to work in the case. Technical data:LxWxH: 393 x 120 x 25,5 mmMaterial: copperMaterial outer housing: steelFins per Inch: 15Threads: 2 x G1/4“Thread size fan mounting: M3Fan size: 120 mmFan slots: 3 single sided / 6 double sided Download data sheet PDF: Alphacool NexXxoS ST25 Full Copper 360 mm radiator

The next generation - The Alphacool Eisblock Aurora water cooler for Geforce RTX 4XXX graphics cards. In order to dissipate the enormous heat of this graphics card generation in the best possible way, numerous optimizations have been made to the water cooler compared to the previous model. The fin structure was adapted and enables a very good water flow while increasing the cooling surface. The modified jet plate with improved inflow engine ensures an optimal distribution of the water on the cooling fins. Technical Highlights The fin structure of this Eisblock cooler generation was developed together with Nvidia board partners. The fin thickness is 0.4 mm, the distance between the cooling fins is 0.4 mm. This ensures a very good water flow while increasing the cooling surface. The jet plate has a revised inlay that spreads the water pressure better over the fins thus optimizing the heat absorption. The adjusted water inflow gives the water a better angle of inflow. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Design The Aurora design of the Geforce RTX 4XXX Eisblock generation is visually calmer and simpler. Only one O-ring runs around the entire cooler. The design around the cooling fins and jetplate makes for a cleaner look. The illumination of the digitally addressable RGB LEDs is even better distributed throughout the cooler as a result of the chrome plating. The terminal's design is in line with the classic Aurora design. Thermal paste & thermal pads The included thermal compound is Alphacool's Subzero. With a thermal conductivity of 16 W/mK, it is one of the highest performing thermal pastes on the market. The electrically non-conductive thermal compund is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850000 TF. Alphacool Soft Pads with 1mm thickness are used on the voltage converter and the graphics memory. The thermal conductivity of the pads is 7 W/mK. The pads for the back of the PCB are 3mm thick and have a thermal conductivity of 3 W/mK.   Compatibility: - MSI GeForce RTX 4090 Suprim X 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 4090 Suprim Liquid X 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 4090 Gaming Trio 24G, 24GB GDDR6X, HDMI, 3x DP   Technical data cooler L x W x H 266,6 x 160 x 34,6mm Material cooler chrome-plated copper Material cooler top acrylic Threads 4 x G1/4" Thickness cooling fins 0,4mm Distance cooling fins 0,4mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 12 Technical data backplate L x W x H 266,6 x 127,25 x 6mm Material aluminium Color black

Alphacool is an internationally renowned company in the field of water cooling solutions for both industrial and home users. To ensure that customers receive the best products available, Alphacool is constantly developing new products and making improvements to existing products. Make No Compromises, Use Copper.As usual, Alphacool uses pure copper for the NexXxoS ST25 slim radiators. The end chambers, the water channels and the cooling fins are all made of copper, a unique selling point worldwide. No other manufacturer relies on pure copper for all these components combined. As a result, Alphacool has been producing one of the most popular and highest performing radiators on the market for many years, providing the perfect foundation for every water cooling system. Full Cooling CapacityTo maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(mK) for copper compared to 236 W/(mK) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result is a fin spacing of 15 FPI. This means that the air flow is only slightly obstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise. CompactThe ST25 slim radiators offer the ideal liquid cooling solution for Mini-PCs or SSF (Small Form Factor) systems. Due to the extremely flat design, the NexXxoS ST25 radiators are ideal for such small cases and due to the reduced size, they give you the extra space you need to work in the case. Technical data:L x W x H: 132 x 92 x 25 mmFPI: 15 Material cooling fins: Copper Material chambers: Copper Material cooling channels: Copper Material threads: Brass Material outer housing: stainless steel G 1/4“ threads: 2 x For fan size: 92 mm Possible fan assembly: 1 x one-sided / 2 x both-sidedDownload data sheet PDF: Alphacool NexXxoS ST25 Full Copper 92mm Radiator

With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop. Eisblock XPX Aurora CPU Cooler Alphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel. Core 100 Aurora Reservoir & VPP Apex Pump The Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector. NexXxoS ST30 Full Copper 240mm Radiator V.2 All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS ST30 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop. Rise Aurora 120mm fans The fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan. AlphaTube HF 13/10mm tubing & HF G1/4" quick connect coupling The clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop. Eiszapfen 13/10mm G1/4" Connections All the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off. Thermal Paste & Coolant The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle. aRGB Controller, Cables, Tools & Accessories All cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately.   Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5   Technical data CPU cooler Dimensions (L x W x H) 75,8 x 75,8 x 33mm Material cooler nickel-plated copper Material housing nylon, acrylic Threads 2 x G1/4“ Illumination 3-Pin 5V, 15 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data reservoir Dimensions (L x W x H) 131 x 76,5 x 76,5mm Capacity 200 ml Material Pump top & cover acetal Material tube acrylic Threads 3x G1/4“ IT Illumination 3-Pin 5V, 12 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data pump Dimensions (L x W x H) 65 x 65 x 41mm Material synthetic material, aluminium, ceramics Threads 4-Pin PWM | SATA Rotational speed 2500 - 4500 RPM Operating voltage 8-13V DC / 14W IP32 Starting voltage 12V DC Maximum pumping head 4,25m Maximum flow rate 340L/h Max working temperature 60°C Pressure tested 0,8 Bar Technical data radiator Dimensions (L x W x H) 271,5 x 124 x 30mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" Possible fan size 120mm Possible fan assembly 2x one-sided / 4x both-sided Fin density 15 Max working temperature 60°C Pressure tested 0,8 Bar Technical data fan Dimensions (L x W x H) 120 x 120 x 25mm Speed 0 - 2500 RPM (+/- 10%) Threads 4-Pin PWM Voltage 12V DC Current consumption 0,65A (0,72 max) Static pressure 3,17 mm H2O Max. air flow 118,9 m³/h Noise max. 31,5 dB(A) Speedometer signal yes Auto-Restart yes Illumination 3-Pin 5V, 20 digital aRGB LEDs, 3.5W Technical data tube Dimensions (outer/inner) 13/10mm Material PVC Length 3m Color clear Technical data 13/10mm G1/4" fittings Material brass Threads 1x G1/4" OT | 1x tube connection 13/10mm Color black Technical data quick release coupling Dimensions (L x D) 60,3 x 26,1mm Material synthetic material Threads 2x G1/4“ IT Color black Technical data coolant Ingredients osmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%) Boiling point 105°C Freezing point -10°C Packaging unit 1L bottle Color clear (not UV-active) Technical thermal grease Viscosity (mPa. s) 3.000.000 Specific Gravity (g/cm³) 2,7 Thermal Conductivity (w/m-K) 16 Temperature Stability (Degree Celcius) -50 ~ 200 Color gray

With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop. Eisblock XPX Aurora CPU Cooler Alphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel. Core 100 Aurora Reservoir & VPP Apex Pump The Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector. NexXxoS ST30 Full Copper 360mm Radiator V.2 All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS ST30 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop. Rise Aurora 120mm fans The fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan. AlphaTube HF 13/10mm tubing & HF G1/4" quick connect coupling The clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop. Eiszapfen 13/10mm G1/4" Connections All the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off. Thermal Paste & Coolant The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle. aRGB Controller, Cables, Tools & Accessories All cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately.   Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5   Technical data CPU cooler Dimensions (L x W x H) 75,8 x 75,8 x 33mm Material cooler nickel-plated copper Material housing nylon, acrylic Threads 2 x G1/4“ Illumination 3-Pin 5V, 15 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data reservoir Dimensions (L x W x H) 131 x 76,5 x 76,5mm Capacity 200 ml Material Pump top & cover acetal Material tube acrylic Threads 3x G1/4“ IT Illumination 3-Pin 5V, 12 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data pump Dimensions (L x W x H) 65 x 65 x 41mm Material synthetic material, aluminium, ceramics Threads 4-Pin PWM | SATA Rotational speed 2500 - 4500 RPM Operating voltage 8-13V DC / 14W IP32 Starting voltage 12V DC Maximum pumping head 4,25m Maximum flow rate 340L/h Max working temperature 60°C Pressure tested 0,8 Bar Technical data radiator Dimensions (L x W x H) 391,5 x 124 x 30mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" Possible fan size 120mm Possible fan assembly 3x one-sided / 6x both-sided Fin density 15 Max working temperature 60°C Pressure tested 0,8 Bar Technical data fan Dimensions (L x W x H) 120 x 120 x 25mm Speed 0 - 2500 RPM (+/- 10%) Threads 4-Pin PWM Voltage 12V DC Current consumption 0,65A (0,72 max) Static pressure 3,17 mm H2O Max. air flow 118,9 m³/h Noise max. 31,5 dB(A) Speedometer signal yes Auto-Restart yes Illumination 3-Pin 5V, 20 digital aRGB LEDs, 3.5W Technical data tube Dimensions (outer/inner) 13/10mm Material PVC Length 3m Color clear Technical data 13/10mm G1/4" fittings Material brass Threads 1x G1/4" OT | 1x tube connection 13/10mm Color black Technical data quick release coupling Dimensions (L x D) 60,3 x 26,1mm Material synthetic material Threads 2x G1/4“ IT Color black Technical data coolant Ingredients osmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%) Boiling point 105°C Freezing point -10°C Packaging unit 1L bottle Color clear (not UV-active) Technical thermal grease Viscosity (mPa. s) 3.000.000 Specific Gravity (g/cm³) 2,7 Thermal Conductivity (w/m-K) 16 Temperature Stability (Degree Celcius) -50 ~ 200 Color gray

With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop. Eisblock XPX Aurora CPU Cooler Alphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel. Core 100 Aurora Reservoir & VPP Apex Pump The Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector. NexXxoS XT45 Full Copper 360mm Radiator V.2 All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS XT45 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop. Rise Aurora 120mm fans The fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan. AlphaTube HF 13/10mm tubing & HF G1/4" quick connect coupling The clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop. Eiszapfen 13/10mm G1/4" Connections All the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off. Thermal Paste & Coolant The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle. aRGB Controller, Cables, Tools & Accessories All cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately.   Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5   Technical data CPU cooler Dimensions (L x W x H) 75,8 x 75,8 x 33mm Material cooler nickel-plated copper Material housing nylon, acrylic Threads 2 x G1/4“ Illumination 3-Pin 5V, 15 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data reservoir Dimensions (L x W x H) 131 x 76,5 x 76,5mm Capacity 200 ml Material Pump top & cover acetal Material tube acrylic Threads 3x G1/4“ IT Illumination 3-Pin 5V, 12 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data pump Dimensions (L x W x H) 65 x 65 x 41mm Material synthetic material, aluminium, ceramics Threads 4-Pin PWM | SATA Rotational speed 2500 - 4500 RPM Operating voltage 8-13V DC / 14W IP32 Starting voltage 12V DC Maximum pumping head 4,25m Maximum flow rate 340L/h Max working temperature 60°C Pressure tested 0,8 Bar Technical data radiator Dimensions (L x W x H) 391,5 x 124 x 45mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" Possible fan size 120mm Possible fan assembly 3x one-sided / 6x both-sided Fin density 12 Max working temperature 60°C Pressure tested 0,8 Bar Technical data fan Dimensions (L x W x H) 120 x 120 x 25mm Speed 0 - 2500 RPM (+/- 10%) Threads 4-Pin PWM Voltage 12V DC Current consumption 0,65A (0,72 max) Static pressure 3,17 mm H2O Max. air flow 118,9 m³/h Noise max. 31,5 dB(A) Speedometer signal yes Auto-Restart yes Illumination 3-Pin 5V, 20 digital aRGB LEDs, 3.5W Technical data tube Dimensions (outer/inner) 13/10mm Material PVC Length 3m Color clear Technical data 13/10mm G1/4" fittings Material brass Threads 1x G1/4" OT Color black Technical data quick release coupling Dimensions (L x D) 60,3 x 26,1mm Material synthetic material Threads 2x G1/4“ IT Color black Technical data coolant Ingredients osmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%) Boiling point 105°C Freezing point -10°C Packaging unit 1L bottle Color clear (not UV-active) Technical thermal grease Viscosity (mPa. s) 3.000.000 Specific Gravity (g/cm³) 2,7 Thermal Conductivity (w/m-K) 16 Temperature Stability (Degree Celcius) -50 ~ 200 Color gray

With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop. Eisblock XPX Aurora CPU Cooler Alphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel. Core 100 Aurora Reservoir & VPP Apex Pump The Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector. NexXxoS ST30 Full Copper 420mm Radiator V.2 All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS ST30 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop. Rise Aurora 140mm fans The fans can be controlled from 0 to 2000 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (154.1 m3/h) coupled with high static pressure (2.20 mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 24 digitally addressable 5V RGB LEDs that illuminate the entire fan. AlphaTube HF 13/10mm tubing & HF G1/4" quick connect coupling The clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop. Eiszapfen 13/10mm G1/4" Connections All the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off. Thermal Paste & Coolant The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle. aRGB Controller, Cables, Tools & Accessories All cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately.   Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5   Technical data CPU cooler Dimensions (L x W x H) 75,8 x 75,8 x 33mm Material cooler nickel-plated copper Material housing nylon, acrylic Threads 2 x G1/4“ Illumination 3-Pin 5V, 15 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data reservoir Dimensions (L x W x H) 131 x 76,5 x 76,5mm Capacity 200 ml Material Pump top & cover acetal Material tube acrylic Threads 3x G1/4“ IT Illumination 3-Pin 5V, 12 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data pump Dimensions (L x W x H) 65 x 65 x 41mm Material synthetic material, aluminium, ceramics Threads 4-Pin PWM | SATA Rotational speed 2500 - 4500 RPM Operating voltage 8-13V DC / 14W IP32 Starting voltage 12V DC Maximum pumping head 4,25m Maximum flow rate 340L/h Max working temperature 60°C Pressure tested 0,8 Bar Technical data radiator Dimensions (L x W x H) 455,5 x 144 x 30mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" Possible fan size 140mm Possible fan assembly 3x one-sided / 6x both-sided Fin density 15 Max working temperature 60°C Pressure tested 0,8 Bar Technical data fan Dimensions (L x W x H) 140 x 140 x 25mm Speed 0 - 2000 RPM (+/- 10%) Threads 4-Pin PWM Voltage 12V DC Current consumption 6,6 Watt (max) Static pressure 2,20 mm/H2O Max. air flow 154,1 m³/h Noise max. 38,4 dB(A) Speedometer signal yes Auto-Restart yes Illumination 3-Pin 5V, 24 digital aRGB LEDs, 3.5W Technical data tube Dimensions (outer/inner) 13/10mm Material PVC Length 3m Color clear Technical data 13/10mm G1/4" fittings Material brass Threads 1x G1/4" OT | 1x tube connection 13/10mm Color black Technical data quick release coupling Dimensions (L x D) 60,3 x 26,1mm Material synthetic material Threads 2x G1/4“ IT Color black Technical data coolant Ingredients osmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%) Boiling point 105°C Freezing point -10°C Packaging unit 1L bottle Color clear (not UV-active) Technical thermal grease Viscosity (mPa. s) 3.000.000 Specific Gravity (g/cm³) 2,7 Thermal Conductivity (w/m-K) 16 Temperature Stability (Degree Celcius) -50 ~ 200 Color gray

For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.The next step in evolution: NexXxoS HPE Full Copper Radiator!The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat)Connection options & mountingThe NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.Safety firstThe NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.Patented screw plugsAll NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case. Technical data radiatorL x W x H173,5 x 144 x 30mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size140mmPossible fan assembly1x one-sided / 2x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density18 FPIWeight496gColorblackWarranty: 10 years???? Warranty Terms

It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 350 W at an ambient temperature of 30°C and fans with 12.000 rpm. X-Flow – Find the easy routeFor the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 245,5 x 40,5 x 60mm Net weight: 577g Maximum working temperature: 80°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 8x M3 threads Fan size: 40mm Fan slots: 5 single-sided / 10 double-sided Fan threads: M3 Pressure-tested: 0,8 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 40mm Penta Radiator Mounting material Datasheet Manual

For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.The next step in evolution: NexXxoS HPE Full Copper Radiator!The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat)Connection options & mountingThe NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.Safety firstThe NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.Patented screw plugsAll NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case. Technical data radiatorL x W x H271,5 x 124 x 45mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size120mmPossible fan assembly2x one-sided / 4x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density16 FPIWeight929gColorblackWarranty: 10 years???? Warranty Terms

It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 420 W at an ambient temperature of 30°C and fans with 12.000 rpm. X-Flow – Find the easy routeFor the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 286 x 40,5 x 60mm Net weight: 644g Maximum working temperature: 60°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 8x M3 threads Fan size: 40mm Fan slots: 6 single-sided / 12 double-sided Fan threads: M3 Pressure-tested: 0,8 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 40mm Hexa Radiator Mounting material Datasheet Manual

For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.The next step in evolution: NexXxoS HPE Full Copper Radiator!The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat)Connection options & mountingThe NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.Safety firstThe NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.Patented screw plugsAll NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case. Technical dataL x W x H314,5 x 144 x 30mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size140mmPossible fan assembly2x one-sided / 4x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density18 FPIWeight724gColorblackWarranty: 10 years???? Warranty Terms

It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 490 W at an ambient temperature of 30°C and fans with 12.000 rpm. X-Flow – Find the easy route For the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 326,5 x 40,5 x 60mm Net weight: 657g Maximum working temperature: 60°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 12x M3 threads Fan size: 40mm Fan slots: 7 single-sided / 14 double-sided Fan threads: M3 Pressure-tested: 0,8 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 40mm Hepta Radiator Mounting material Datasheet Manual

For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.The next step in evolution: NexXxoS HPE Full Copper Radiator!The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat)Connection options & mountingThe NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.Safety firstThe NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.Patented screw plugsAll NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case. Technical data radiatorL x W x H391,5 x 124 x 45mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size120mmPossible fan assembly3x one-sided / 6x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density16 FPIWeight1248gColorblackWarranty: 10 years???? Warranty Terms

It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 440 W at an ambient temperature of 30°C and fans with 6500 rpm. X-Flow – Find the easy routeFor the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 203,5 x 80 x 60mm Net weight: 674g Maximum working temperature: 180°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 4x M3 threads Fan size: 80mm Fan slots: 2 single-sided / 4 double-sided Fan threads: M3 Pressure-tested: 1,5 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 80mm Dual Radiator Mounting material Datasheet Manual

For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.The next step in evolution: NexXxoS HPE Full Copper Radiator!The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat)Connection options & mountingThe NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.Safety firstThe NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.Patented screw plugsAll NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case. Technical data radiatorL x W x H314,5 x 144 x 45mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size140mmPossible fan assembly2x one-sided / 4x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density16 FPIWeight1131gColorblackWarranty: 10 years???? Warranty Terms

It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 660 W at an ambient temperature of 30°C and fans with 6500 rpm. X-Flow – Find the easy routeFor the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 284 x 80 x 60mm Net weight: 900g Maximum working temperature: 180°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 8x M3 threads Fan size: 80mm Fan slots: 3 single-sided / 6 double-sided Fan threads: M3 Pressure-tested: 1,5 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 80mm Triple Radiator Mounting material Datasheet Manual

For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.The next step in evolution: NexXxoS HPE Full Copper Radiator!The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat) Connection options & mountingThe NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.Safety firstThe NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.Patented screw plugsAll NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case. Technical data radiatorL x W x H455,5 x 144 x 30mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size140mmPossible fan assembly3x one-sided / 6x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density18 FPIWeight984gColorblackWarranty: 10 years???? Warranty Terms