X Dream i117 is a low profile aluminum extrusion fin specially designed for Intel platform with only 60mm height. The cross shaped design can centralize airflow for heat dissipation providing excellent heat dissipation. The circular fan operates silently with only 19dBA suitable for quiet working environment.
Xilence X5 thermal paste was specifically designed for high-end processors. The very high thermal conductivity ensures for an efficient heat exchange and low temperatures! The paste works reliably at temperatures from -50 to +300°C – therefore, it is particularly well suited for extreme overclocking. Since the X5 is not electrically conductive, there is no danger for the surrounding hardware! Contents: 2.5 g.
Spare/Accessory SRC-B tower passive heat sinks, 98mmx100mm. 2 are required with Intel® Server Board S2600CP in P4000 chassis if two processors are installed.
STS100P (Order code BXSTS100P) is a 1U heatsink with no fan. This is a passive thermal solution intended for 1U and 2U systems with airflow ducting. Will support Intel® Xeon® processor 5500 series up to 95 watts TDP.
Product kirjeldus: Gembird FANCASE2 case fan Product Type: Case fan Fan Diameter: 92 mm Fan kõrgus: 25 mm Fan Bearing: liugelaager pöördekiirus: 2400 pööret minutis õhuvool: 43.7 cfm müratase: 30.4 dBA nominaalpinge: 12 V mõõtmed (WxDxH): 9.2 cm x 9.2 cm x 2.5 cm
Inexpensive Quality and ReliabilityThe fact that good quality does not have to be expensive is shown by the third version of the NB-BlackSilentFan series. The well-balanced properties of this bestseller make this inexpensive and high-quality series of fans the absolute bestseller throughout the world.Our least expensive series of fans moves in such high circles, however, that other producers come off worse in direct comparisons even with their considerably more expensive "high-end" fans.- High-quality, stable, glass fibre-reinforced chassis in a classic design with anti-dust polycarbonate rotor.- Extra-long connection cable.- Incl. 4 screws for mounting.- Extremely low start voltage!- Low impulse noise NB-EKAPlus II wide-range drive.- Reverse pole and overload protection, restart function, extremely failsafe.- Extremely quiet bearings.SobilikArvuti korpusTüüpVentilaatorVentilaatori läbimõõt4 cmToetatud protsessoripesadEi ole toetatudPöörlemiskiirus (max)3800 RPMMüratase (suur kiirus)14 dBÕhuvool6,7 m³/hToote värvMustPinge9Laius40 mmSügavus40 mmKõrgus10 mm
Quiet, reliable and affordable. Since 2005 this has been one of our best-selling fans and one of the favourites in the range of the ultra-silent classic design fans. The BlackSilentFan series is the perfect choice for customers looking for an affordable yet high-quality fan. High-quality components in combination with an intelligent setup result in a unique value for money ratio. The NB-BlackSilentFan-series achieves better results in almost all respects in comparison to standard fans.
The NF-A14 is a premium quality quiet 140mm fan with a square frame that complies with Noctua’s AAO (Advanced Acoustic Optimisation) standard. Its square shape and 140mm mounting holes (124.5mm spacing) make it ideal for use on watercooling radiators or as an upgrade for 140mm case fans. Featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A14 further improves the renowned quiet cooling performance of the award-winning NF-P14. The FLX version provides 1200/1050/900rpm speed settings via the supplied Low-Noise Adaptors in order to provide full flexibility in fine-tuning the fan for maximum ventilation performance or near-silent operation. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands.Attachment screwedPower Connection 3-Pin-fan connectorFan Bearing SSOPower Input 0 - 0.96 watt(s)Voltage Range 0 - 12 VNumber of Revolutions 900 - 1200 rpmVolume 0 - 19.2 dB(A)Volumetric Flow 0 - 115.5 m3/h, 0 - 68 cfmDimensionsFans Fan 1 140 x 140 x 25 mm
The NF-A14 is a premium quality quiet 140mm fan with a square frame that complies with Noctua’s AAO (Advanced Acoustic Optimisation) standard. Its square shape and 140mm mounting holes (124.5mm spacing) make it ideal for use on watercooling radiators or as an upgrade for 140mm case fans. Featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A14 further improves the renowned quiet cooling performance of the award-winning NF-P14. The ULN version provides super-slow 800/650rpm speed settings for ultra-low-noise applications and highly noise sensitive users who demand near-silent operation. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make it an elite choice for the highest demands.Attachment screwedPower Connection 3-Pin-fan connectorFan Bearing SSOPower Input 0 - 0.48 watt(s)Voltage Range 0 - 12 VNumber of Revolutions 650 - 800 rpmVolume 9.1 - 11.9 dB(A)Volumetric Flow 66.4 - 79.8 m3/h, 39.1 - 47 cfmDimensionsFans Fan 1 140 x 140 x 25 mm
The NF-A15 is a premium quality quiet 140mm fan with a round frame that complies with Noctua’s AAO (Advanced Acoustic Optimisation) standard. The NF-A15’s frame Featuress 120mm mounting holes (105mm spacing) and has been enlarged to 150mm width in order to provide superior performance on today’s high-end CPU coolers. Featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 further improves the renowned quiet cooling performance of the award-winning NF-P14. Noctua’s custom designed PWM IC for fully automatic speed control and reference class SSO2 bearings guarantee superb running smoothness and excellent long-term stability. Topped off with modular cabling, a Low-Noise Adaptor and 6 years manufacturer’s warranty, the NF-A15 is a premium choice for the highest demands.Attachment screwedPower Connection PWM fan connectorFan Bearing SSOPower Input 0 - 0.96 watt(s)Voltage Range 0 - 12 VNumber of Revolutions 900 - 1200 rpmVolume 13.8 - 19.2 dB(A)Volumetric Flow 88.7 - 115.5 m3/h, 52.2 - 68 cfmDimensionsFans Fan 1 150 x 140 x 25 mm
Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A6x25 FLX is a highly optimised, premium quality quiet fan in 60x25mm size. Smooth Commutation Drive technology and Noctua’s reference class SSO2 bearings guarantee superb running smoothness and excellent long-term stability. Topped off with modular cabling, Low-Noise Adaptors and 6 years manufacturer’s warranty, the NF-A6x25 is a premium choice for the highest demands.Flow Acceleration ChannelsThe NF-A6x25 impeller Featuress suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. buttonReduced Motor Hub SizeThanks to its streamlined, compact motor design, the NF-A6x25’s motor hub is smaller than with conventional 6cm fans. This allows for more blade surface area and thus contributes to the NF-A6x25’s superior airflow and pressure performance.AAO FrameNoctua’s AAO (Advanced Acoustic Optimisation) frames Features integrated anti-vibration pads as well as Noctua’s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan’s performance/noise efficiency. buttonStepped Inlet DesignNoctua’s Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space restricted environments. buttonInner Surface MicrostructuresWith the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. buttonIntegrated Anti-Vibration PadsIntegrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of mi
Tootekood: BFF-SPRO-P14025WW-RPGTIN: 4716779443127Jahutid ja lisad
Following the success of our Spectre™ Fan Series, Spectre Pro PWM ups the ante with an all-new design and enhanced performance. The high pressure and CFM design is controlled by PWM technology for finer speed control - perfect for high-performance CPU coolers. Its dual ring construction not only looks great, but also helps to dampen vibrations that cause unnecessary noise. Reinforced fan blades prevent warping at high RPM levels, while focused airflow ensures cool air can reach all of your installed components. With FDB technology for low noise and long life and availability in both solid black and solid white variants, Spectre Pro PWM is the new gold standard in performance CPU cooling fans.PWM TechnologyTrue to its namesake, Spectre Pro PWM users pulse width modulation technology to adjust fan speeds. This technology enables your system to control your cooling with much greater precision than conventional linear voltage fans, making them perfect for CPU coolers.High Pressure/CFM DesignEngineered for maximum pressure and airflow, Spectre Pro PWM delivers a torrent of air that will keep your CPU cool even when the action heats up. Performance freaks are going to love Spectre Pro PWM.Dual Ring ConstructionUsing a dual ring construction, Spectre Pro PWM fans not only offer aggressive looks, but also vibration dampening properties, helping to keep noise levels in check. In short, our Spectre Pro PWM looks different because it is different.Reinforced Fan BladesHigh rotation speeds can actually warp fan blades while in motion, resulting in more turbulence and noise. Spectre Pro PWM features reinforced fan blades that resist warping even when spinning at high speeds for maximum cooling performance.Silent Operation and Long LifeLike our Spectre™ Silent Fan Series, our Spectre Pro PWM features the very same fluid dynamic bearing technology for minimum noise and maximum operating life.Two Color VersionsNo two setups are alike, which is why Spectre Pro PWM comes both solid black and solid white versions.SobilikArvuti korpusTüüpVentilaatorVentilaatori läbimõõt14 cmToetatud protsessoripesadEi ole toetatudÜhilduvad protsessoriseeriadEi ole toetatudPöörlemiskiirus (min)500 RPMPöörlemiskiirus (max)1800 RPMMüratase (suur kiirus)29,2 dBMaksimaalne õhuvool122,2 cfmMaksimaalne õhusurve2,8 mmH2OVentilaatorite arv1 ventilaator(id)Kiiruste arv2Toote värvValgePinge12Nimivool0,4 ALaius140 mmSügavus140 mmKõrgus25 mmLaagertehnoloogiaFDBÜhilduv kiibikomplektEi ole toetatud
The FN121-P-L builds upon the excellent FN121 and FM121 fan designs with optimized 9 blade fan design and frame geometry to improve performance and reduce noise level at the same time.- High performance for system thermal solution- High airflow and less noise with 9-bladed design- Brilliant LEDTüüpVentilaatorVentilaatori läbimõõt12 cmToetatud protsessoripesadEi ole toetatudÜhilduvad protsessoriseeriadEi ole toetatudPöörlemiskiirus (max)1200 RPMMüratase (suur kiirus)25,15 dBMaksimaalne õhuvool58,47 cfmMaksimaalne õhusurve1,12 mmH2OToote värvLäbipaistevValgustusLEDValgustuse värvRohelineToiteallikas1,32 WNimivool0,11 ALaius120 mmSügavus25 mmKõrgus120 mm
Der FN121 basiert auf dem hervorragenden Design der Modelle FN121 und FM121, arbeitet jedoch mit 9 optimierten Lüfterschaufeln und verbesserter Rahmengeometrie; dies steigert die Leistung und verringert gleichzeitig das Betriebsgeräusch. - Hohe Leistung bei der Kühlung des Systems - Hoher Luftfluß und geringe Geräuschentwicklung im 9-Blatt Design Technische Daten: Abmessung: 120 x 120 x 25mm Farben: Transparent Rot beleuchtet Gewicht: 122g Nennspannung: 12V Startspannung: 6,5 Volt Leistungsaufnahme: 0,33A Nenndrehzahl: 1200 rpm±200 rpm Luftförderleistung: max. 99,337m³/h / 58,47CFM Lautstärke: 25 dB/A Max. statischer Druck: 1,12mm-H2O
The FN121-P-L builds upon the excellent FN121 and FM121 fan designs with optimized 9 blade fan design and frame geometry to improve performance and reduce noise level at the same time.- High performance for system thermal solution- High airflow and less noise with 9-bladed design- Brilliant LEDTüüpVentilaatorVentilaatori läbimõõt12 cmToetatud protsessoripesadEi ole toetatudÜhilduvad protsessoriseeriadEi ole toetatudPöörlemiskiirus (max)1200 RPMMüratase (suur kiirus)25,15 dBMaksimaalne õhuvool58,47 cfmMaksimaalne õhusurve1,12 mmH2OToote värvLäbipaistevValgustusLEDValgustuse värvValgeToiteallikas1,32 WNimivool0,11 ALaius120 mmSügavus25 mmKõrgus120 mm
Dimentions: 5.25″ bay Power Output: Up to 30w per Channel Face Plate Color Available: Black Anodized/Silver Aluminium DC Input: +12v (Standard 4-Pin Connector) DC Output: 0-12v Changeable Display Color: Red, Yellow, Green, Cyan, Blue, Purple, White Control Channels: 4 tootja lehel:http://www.lamptron.com/product/controllers/fc5-v2/
Cpu cooler, Intel, socket 1155/56, 100mm fan, hydro bearing, 95W (TDP) * Ideal thermal solution for Intel 1155/56. * Radial heatsink with 100mm fan to dissipate heat very efficiently.
