Produktbeschreibung:Doppelnippel von G3/8" Aussengewinde auf G1/4" Innengewinde. Technische Daten:Höhe 19mm. Hinweis: Um diese Adapter 100%ig dicht zu bekommen empfehlen wir ihnen die verlinkte Dichtung. Dieses Produkt wurde für Sie getestet:OCReviews
Our trusted fittings are available in a whole new design! Robust high-quality reducing socket from G1/4" inner thread to G3/8" outer thread. Technical details: Material: Brass, black nickel coated Thread size: 1/4" inner thread to 3/8" outer thread Extent of delivery: Reducing socket
Alphacool's ultimate solution for cooling your computer with a layer of ice. Not a layer of ice in the traditional sense made of frozen water, but a layer that will freeze any chip. The properties of the new thermal pads speak for themselves.The "Alphacool ice layer" offers all the advantages and typical properties of a thermal pad: self-adhesive, elastic, adaptable and much more! The area of application is just as versatile, whether for RAM and mainboard coolers or graphics card and CPU coolers, wherever the circuit board meets the heat sink, the Alphacool ice layer is a good choice.The Ice Layers Light are available in the 7W/mk power level in 0.5mm, 1mm and 1.5mm thicknesses. Perfect for compensating for height differences. Each thickness is also available in 100x100mm and 120x20mm (suitable for RAM coolers). These can be easily separated with scissors to individually adjust the right size for each component Technical dataDimensions (L x W x H)14 x 14 x 1mmThermal conductivity7W/mKColorpink
10mm barb fitting made from nickel-coated brass with O-ring for PVC, PU ,PA, silicone or PE hoses with an inner diameter of 10mm. G1/4" outer threads. threads straight, SW 14. Note for watercooling beginners:The connectors for imperial hoses(7/16“, 3/8“, ½“) are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp. Overview:10mm (3/8“) hose clamp: up to 8mm none, from 10mm up required10mm (7/16“) hose clamp: up to 8mm none, from 10mm up required12mm (1/2“) hose clamp: up to 11mm none, from 12mm up required13mm (1/2“) hose clamp: up to 11mm none, from 13mm up required
13mm barbed fitting made from nickel coated brass with O-ring seal for hoses with an inner diameter of 11-13mm . Inner diameter of connector: 13mm This hose connector was specially designed for Highflow systems. Note: For safety reasons we recommend the use of zip ties or hose clamps for additional hose fixation. Note for watercooling beginners:The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp. Overview:10mm (3/8") hose clamp: up to 8mm none, from 10mm up required10mm (7/16") hose clamp: up to 8mm none, from 10mm up required12mm (1/2") hose clamp: up to 11mm none, from 12mm up required13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
Double nipple for connecting 2x 1/4 inch internal threads. This double nipple can be used to connect different adapters to each other, for example. It can also be used to connect certain coolers together. This double nipple has an O-ring on both sides and therefore offers optimal security for your system. Since the thread length including the seal is only 4mm, this increases the area of application even further. The gap of just 3mm is edged and is therefore very suitable for assembly without tools. Technical details: Material: nickel-plated brass Total length: 11.5mm Thread length: 4mm Spacer: 3mm Scope of delivery: 1x double nipple G1/4 AG to G1/4 AG with O-ring - black nickel
High-flow barbed fitting for hoses with an inner diameter of 11mm to 13mm. This fitting was specially designed for High-flow systems. Technical data: Thread: 3/8" Compatible to hoses with an inner diameter of 11mm to 13mm Note for watercooling beginners:The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp. Overview:10mm (3/8") hose clamp: up to 8mm none, from 10mm up required10mm (7/16") hose clamp: up to 8mm none, from 10mm up required12mm (1/2") hose clamp: up to 11mm none, from 12mm up required13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
Our trusted fittings are available in a whole new design! Robust high-quality barbed fitting with cylindrical thread (G1/8"). The fitting is suitable for PVC, OU, PA, silicone and PE hoses with an inner diameter of 13mm. With integrated 1/8" Perbunan(r) O-Ring seal. Technical details: Material: Brass, black nickel coated Hose size: 13m inner diameter Thread size: G1/8" Extent of delivery: Black nickel barbed fitting with O-ring seal Note for watercooling beginners: The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp. Overview: 10mm (3/8") hose clamp: up to 8mm none, from 10mm up required 10mm (7/16") hose clamp: up to 8mm none, from 10mm up required 12mm (1/2") hose clamp: up to 11mm none, from 12mm up required 13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
Original part number TG-G1.5-01 Product name Gembird Heatsink Thermal Paste Grease 1.5g Producer Gembird Class of product Cooling accessories Additional information Thermal compund (grease) for heatsinksExcellent thermal impedancePerfect stability - will not separate, run, migrate, or bleedNon capacitive or electrically conductiveWeight: 1.5 gColor: GrayThermal conductivity: > 4.5 W / mKThermal Impedance Density: > 2.5Viscosity: 76 CPS
13mm barb fitting made from nickel coated brass with O-ring seal for PVC, PU, PA, silicone or PE hoses with an inner diameter of 11-13mm. G3/8" outer thread. The hose must be fixated with a zip tie or hose clamp. Inner diameter of fitting: 10mm. Note for watercooling beginners:The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp. Overview:10mm (3/8") hose clamp: up to 8mm none, from 10mm up required10mm (7/16") hose clamp: up to 8mm none, from 10mm up required12mm (1/2") hose clamp: up to 11mm none, from 12mm up required13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
High-grade robust hose connector. The hose is fixated safely by the union nut and seals immediately, yet it can easily be released with one hand. The connector is angled by 90°. This system ensures maximum safety and easy of use. The connector is compatible with hoses with an outer diameter of 10mm and an inner diameter of 8mm. Technical specifications: Material: Nickel plated brass Hose compatibility: 10/8mm Height: 31mm Extent of delivery: 1x 10/8mm L hose connector - compact - silver nickel Please note: This fitting is functionally equal with current fittings and only the optical design of the fitting and union nut vary. This type of fitting was most commonly sold until 2006 and was afterwards replaced by the new version. To allow customers with systems in the old fitting design to expand or replace their system we still offer these fittings. As they are more expensive in manufacturing and trade we generally recommend new customers to use the new fitting type.
High-quality hose connector made from nickel coated brass. Not quite as cheap as the plastic connectors, but also optically very attractive and even more durable and sturdy. Both hose endings are pushed onto the connector and simply fixated with the union nuts. This system ensures maximum safety and ease of installation. Suitable for hoses with an outer diameter of 11mm and an inner diameter of 8mm.r of 8mm.>
Our trusted fittings are available in a whole new design! Robust high-quality barbed fitting with cylindrical thread (G3/8"). The fitting is suitable for PVC, OU, PA, silicone and PE hoses with an inner diameter of 13mm. With integrated 3/8" Perbunan(r) O-Ring seal. Technical details: Material: Brass, black nickel coated Hose size: 13 mm inner diameter Thread size: G3/8" Extent of delivery: Black nickel barbed fitting with O-ring seal Note for watercooling beginners: The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp. Overview: 10mm (3/8") hose clamp: up to 8mm none, from 10mm up required 10mm (7/16") hose clamp: up to 8mm none, from 10mm up required 12mm (1/2") hose clamp: up to 11mm none, from 12mm up required 13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
Robust high-quality nickel plated barbed fitting with cylindrical thread (G1/4"). The fitting is suitable for PVC, PU, PA, silicone and PE hoses with an inner diameter of 10mm. With integrated 1/4" Perbunan(r) O-Ring seal. We recommend the use of hose clamps or zip ties for best possible safety! Note for watercooling beginners: The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp. Overview: 10mm (3/8") hose clamp: up to 8mm none, from 10mm up required 10mm (7/16") hose clamp: up to 8mm none, from 10mm up required 12mm (1/2") hose clamp: up to 11mm none, from 12mm up required 13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
High-grade robust hose connector. The hose is fixated safely by the union nut and seals immediately, yet it can easily be released with one hand. The connector is angled by 90°. This system ensures maximum safety and easy of use. The connector is compatible with hoses with an outer diameter of 10mm and an inner diameter of 8mm. Technical specifications: Material: Nickel plated brass Hose compatibility: 10/8mm Height: 31mm Extent of delivery: 1x 10/8mm L hose connector - compact - black nickel Please note: This fitting is functionally equal with current fittings and only the optical design of the fitting and union nut vary. This type of fitting was most commonly sold until 2006 and was afterwards replaced by the new version. To allow customers with systems in the old fitting design to expand or replace their system we still offer these fittings. As they are more expensive in manufacturing and trade we generally recommend new customers to use the new fitting type.
High quality tube made from polyurethane (PUR), fits all systems. 10mm outer diameter and 8mm inner diameter. Colour: transparent Order quantity = tube length in metres!
High-grade robust hose connector. The hose is fixated safely by the union nut and seals immediately, yet it can easily be released with one hand. The connector is angled by 90°. This system ensures maximum safety and easy of use. The connector is compatible with hoses with an outer diameter of 11mm and an inner diameter of 8mm. Technical specifications: Material: Black nickel plated brass Hose compatibility: 11/8mm Height: 31mm Extent of delivery: 1x 11/8mm L hose connector - compact - black nickel