Water and electronics are not known to be compatible. To ensure that the separation between the two areas remains 100%, even with beloved water cooling, the sealing rings at the connections should be changed regularly. Although they have a long life, similar to vehicle tires, they lose their elasticity over time and become brittle. What leads to reduced grip on the road and provokes accidents in case of doubt, can also cause problems for the Wakü if a system becomes leaky. In addition to the contact of the water with the electronics, especially the sinking water pressure, the higher volume due to air inside the system and, in case of doubt, the total failure of the cooling are a considerable risk for the expensive hardware. With this set of many O-shaped sealing rings even extensive systems can be retreaded. The inner diameter requires use for G1 / 4 inch external thread. These are the most common thread standard, so that with few exceptions almost all screw threads can be sealed. Take care! Technical details:Material: rubberFor: G1 / 4 inch external threadContent: about 50 pieces
Dimensions: 30 x 30 x 1,0mm Thermal conductivity: 8.0 W/mk Temperature range: -100°C / +250°C Maximum bridgeable gap: 1,0 mm Muu info: Ei juhi elektrit.
Black & red 92 mm case fan with PWM (Pulse Width Modulation). Cool your PC components with this Xilence fan. It offers you an extremely good price-performance ratio, and cools your PC efficiently at a low noise level.
The DeepCool Mounting Upgrades For NEPTWIN Series, model EM072-MKNNIN-G-1, is a specialized accessory designed to enhance the compatibility and installation process of your cooling system. With dimensions of 105mm in depth, 135mm in height, 30mm in width, and a gross weight of 0.141 kg, this kit is compact yet essential for a seamless setup. It is compatible with a wide range of Deepcool coolers, including the GAMMAXX 400/GTE/GT Series, NEPTWIN Series, AS500 Series/AK620, ASSASSIN III, and CASTLE/GAMMAXX Liquid Coolers, ensuring a broad application scope. The kit, weighing a net 0.123 kg, is a must-have for users looking to upgrade or maintain their Deepcool cooling systems, ensuring optimal performance and a perfect fit.
EK ZMT (Zero Maintainance Tubing) is a high quality, zero maintainance industrial grade EPDM rubber tubing in stylish matte black.This tubing is - just like Norprene - designed to withstand harsh conditions for a very long period of time, offering a truly exceptional lifespan even under UV, ozone and heat exposure for many years.Unlike most PVC and PUR tubing this high quality EK made EPDM rubber tubing ensures long lasting operation and does not suffer from plasticizer leaching effect which can cause blockage (gunking) in your liquid cooling loop. This 9,5/15,9mm (ID/OD) tubing also allow for very small bend radius!This may not be the tubing for everyone but it is guaranteed to be hassle-free even in the long run which is something other PVC/PUR tubing cannot offer!This tubing is a perfect companion for EK-CSQ Fitting 10/16 series compression fttings.- Material: EPDM.- Colour: Black, not UV-reactive.- Outer diameter: 15,9mm (5/8").- Inner diameter: 9,5mm (3/8").- Operating temperature range: -30°C to 110°C.- Compatible with all known widely used coolants.Toote värvMust
The nickel-plated plugs from Bitspower in the colour shiny black can be screwed into a G1/4" internal thread for a certain time or permanently, e.g. to close radiators or equalizing tanks. The grip of the sealing plug is particularly noble and practical. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Black Thread: G1/4" Thread Length: 5 mm
The nickel-plated plugs from Bitspower in the colour shiny silver can be screwed into a G1/4" internal thread for a certain time or permanently, e.g. to close radiators or equalizing tanks. The grip of the sealing plug is particularly noble and practical. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Thread: G1/4" Thread Length: 5 mm
DEMCiflex Dust Filter 92mm Round Black/White DF0489Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 92 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. This is very simple in many ways. Firstly, it is easy to see if cleaning is necessary again - as soon as the white filter fabric has a gray haze, you should do this task. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Finally, a few notes on the installation: First, the question arises, which fans have to be covered at all. As already mentioned, this applies exclusively to the sucking fans. But which are they? The safest way to recognize this is on the fan itself, with two arrows on the outside of the fan frame. If one of the two arrows points towards the interior, it is an aspirating fan. These are usually located on the front, side and bottom, whereas the rear and cover fans usually carry the air out of the housing and therefore need not be filtered. In order to maximize the filter effect, an overpressure in the housing can be generated. This means that more volume of air is forced into the housing than is being sucked out of the housing by other fans at the same time. This prevents air (and with it the dust) from entering the interior through other openings that may not have been filtered. If all fans are the same size, you should blow more fans into the housing than pull out. In this case, the power supply is to be counted as an additional, extracting fan, as long as it does not receive its supply (fan side) directly from the outside (occurs at floor mounting). If different fans with different sizes and speeds are used, the respective air volumes (m³ / h) in the data sheets give a good reference value, whereby in turn the total volume of the suction fans must be higher than that of the blowing out fans. Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate. Figure 4 shows an example configuration on a housing (not included). As can be seen, the use of LED fans is possible because the transparent material hardly hampers the lighting. Technical details:Size (frame): Ø approx. 110 mmSize (filter): Ø approx. 85 mmCompatibility: 92 mm fan slotMaterial (filter): polyester meshColor: black (frame), white (filter)Mounting: magnetic bracket + mounting frameAdvantages: Fast installation No compatibility restriction Easy and quick cleaning Effective filter effect with high air permeability Durable fabric
Schwarzer Temperatursensor für Custom-Waküs, mit G1/4-Zoll-Innengewinde, inkl. Adapter auf G1/4-Zoll-Außengewinde, gängiger 2-Pin-Anschluss, voll vergossen und verzinkt
The Alphacool synthetic backplate for XPX, XPX Aurora, XPX Aurora Edge, XPX 1U, XPX Pro 1U, XPX Pro Aurora, Eisbaer, Eisbaer Aurora, Eisbaer Pro, Eisbaer LT is compatible with Intel's LGA 115X, 1200 and 1700 sockets. This includes solo water coolers and CPU AIOs. The backplate stabilises the CPU cooler on the socket and ensures optimum contact pressure. There is an additional adhesive surface on the back of the backplate that serves as an installation aid and thus makes mounting much easier.Compatibility:Intel: LGA 1150 / 1151 / 1155 / 1200 / 1700 Technical data L x W x H 99 x 99 x 3 mm Material synthetic Weight 29 g Color black
With the Thermaltake Pacific Compression Series, you get a complete solution for enthusiasts and custom PC manufacturers that meets the requirements of building and installing a complete water cooling system. With durable G1/4" copper fittings coated with chrome, every detail is taken seriously. Only compatible with PETG Tube 5/8" (16mm) OD to make your system a showcase for everyone with Thermaltake's high quality components.
ARCTIC MX-6. Tüüp: Thermal grease, Toote värv: Hall, Maksimaalne kasutamistemperatuur: 150 °C. Kaal: 4 g. Kogus pakis: 1 tk, Pakendi laius: 24 mm, Pakendi sügavus: 120 mm
Cpu cooler, Intel, socket 1155/56, 100mm fan, hydro bearing, 95W (TDP) * Ideal thermal solution for Intel 1155/56. * Radial heatsink with 100mm fan to dissipate heat very efficiently.
Tri-Linear Ceramic Thermal CompoundThe high-density, ceramic-based thermal compound specifically designed for modern high-power CPUs and high-performance heatsinks or water-cooling solutions.Features:Tri-Linear Ceramic Content:Like the original Céramique, Céramique 2 uses only ceramic fillers so it is neither electrically conductive nor capacitive. The tri-linear composite of aluminum oxide, zinc oxide and boron nitride allows the thinnest possible bond line with modern processors, heatsinks and electronics. Critically-sized particles and new ultra-high shear mixing techniques maximize Céramique 2's thermal performance and help maintain a stable homogenous suspension. This exclusive combination provides performance exceeding most metal based compounds.Toote värvValgeKaal25 gKasutamistemperatuur (T-T)-150 - 130 °C
