The Adaptec Series 8 and Series 7H fan kit is a clip-on fan that clips onto the controller’s heatsinkTüüpJahutiToetatud protsessoripesadEi ole toetatudÜhilduvad protsessoriseeriadEi ole toetatudÜhilduvusAsus ASR-8885Q, ASR-8885, ASR-8805, ASR-8405, ASA-71605H, ASA-70165H, ASA-7805H, ASA-7085H, ASA-71605He, ASA-70165H
- True Hi-Flow Design.- Hi Quality Brass Material.- High Quality E-Plated Finished In Deep Black Color.- Hiding O-Ring Design.- RoHS Compliant.Toote värvMustMaterjalMessing
Dreifach drehbarer und um maximal 90 Grad gewinkelter, silbern vernickelter Adapter von Bitspower mit 1x G1/4-Zoll-Innengewinde und 1x G1/4-Zoll-Außengewinde
- True Hi-Flow Design.- Hi-Quality Brass Material.- High Durability Nickel Finished In Black Sparkle Color.- Sealed O-Ring included.- For through Hole Application.- RoHS Compliant.Toote värvMustMaterjalMessing
- Design for PC Hi-End Water Cooling.- Hi-Quality Brass Material.- High Durability Nickel Finished In Black Sparkle Color.- Hiding O-Ring Design.- Low-Profile Type.- RoHS Compliant.Toote värvMustMaterjalMessing
- True Hi-Flow Design.- Hi-Quality Brass Material.- High Durability Nickel Finished In Black Sparkle Color.- Hiding O-Ring Design.- Design For Tube ID 8MM OD 11MM Application.- RoHS Compliant.Toote värvMustMaterjalMessing
- True Hi-Flow Design.- Hi-Quality Brass Material.- High Durability Nickel Finished In Black Sparkle Color.- Hiding O-Ring Design.- Design For Tube ID 1/2" With Stop Fitting.- RoHS Compliant.Toote värvMustMaterjalMessing
The nickel-plated temperature sensor in the colour shiny silver from Bitspower is an easy way to keep an eye on the water temperature of a water cooling system. To do this, the sensor, which has a sealing ring, is screwed into a G1/4" thread, whereby an internal extension then measures the temperature of the surrounding water. With a 90cm long 2-pin cable, the sensor can be connected to a display or control unit or to a compatible motherboard. This allows, for example, the rotation speed of radiator fans to be automatically controlled depending on the water temperature. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Thread: G1/4" Thread Length: 4 mm Sensor Length: 8 mm 2-Pin Cable: 90 cm
DetailsEK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only!It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0,5mm x 45° chamfer.Technical data:- Material: PETG- Inner diameter: 10 mm- Outer diameter: 12 mm- Length: 500 mm (19.5")The package contains 2 pieces of tube only. Please purchase EK-HD Adapter or EK-HDC compression fittings separately!Toote värvLäbipaistevLaius500 mm
All metal inline coolant filter for keeping accidental debris from damaging the pump or clogging other components. It includes two reusable stainless steel filters with hole sizes of 0.42mm/sq and 0.27mm/sq.G 1/4 BSPP sockets are provided on both sides, with one male and one female for easy installation into the inlet of a water block, pump, or heat exchanger. Nickel-plated brass and stainless steel mesh filters. The filter body can be unscrewed for cleaning or replacement.Toote värvRoostevaba terasLaius32 mmSügavus23,3 mmKõrgus23,3 mmKaal70 g
Preces apraksts angļu valodā:Koolance patented quick disconnect no-spill coupling with automatic shutoff. G 1/4 BSPP (parallel) thread male fitting for screwing directly into a water block or other component. It will only fit a Koolance QD3 female quick disconnect.After pulling the ring on the female QDC side, the quick-disconnect fittings will separate. Liquid on both sides will be automatically obstructed with approximately 0.2ml freed. Coolant volume lost upon disconnection will rise with internal pressure higher than 0.5kgf/cm2 (7psi).
EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only!It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0,5mm x 45° chamfer.Technical data:- Material: PETG- Inner diameter: 12 mm- Outer diameter: 16 mm- Length: 500 mm (19.5")The package contains 2 pieces of tube only. Please purchase EK-HD Adapter or EK-HDC compression fittings separately!Toote värvLäbipaistevLaius500 mm
EK-HD Tube is a multiple VGA water blocks connectivity set consisting of a pair of pre-cut solid Acrylic tubes. In conjunction with EK-HD Adapter fittings this EK-HD Tube set can be used as an alternative solution for connecting multiple full-cover GPU water blocks (SLI/CrossFireX).Toote värvLäbipaistevMaterjalAkrüül
