Portos ARGB Mini Black Logic Portos ARGB Mini is a chassis created to build a powerful and modern gaming PC. WHEN IT'S THE INSIDE THAT COUNTS... Are you building a computer for gaming? And you want it to not take up too much space on your desk? Then of course you need a well-thought-out, well-designed and good-looking MINI ATX-sized case. Preferably still one with three mounted ARGB fans, an airy front and top, dust filters, and the side panel was made into a tempered glass door. This is where Case Logic Concept Portos ARGB MINI comes to the rescue. A concrete competitor for gaming tasks, providing good airflow, component culture, their safety and low temperatures of installed components. OPEN YOURSELF TO NEW A side panel made of tempered glass in the form of a hinged door makes it easier not only to install components, but also to keep the computer clean. Just open the door and clean the center with compressed air. Isn't it simple and practical? It's the only one we want to give you, because they simply belong to you. TO HOT COMPONENTS SAY "NO" An airy front and top panel significantly facilitates air circulation. Two 120 mm fans on the front and one 120 mm fan on the back Cases effectively cool the heated components. All for your comfort and the safety of your computer. Always willing to play Logic PORTOS ARGB MINI is a case created to build an efficient and modern gaming PC. Optimal airflow, practical solutions and pre-installed ARGB fans make up its gaming character. READY FOR GAMING COMPONENTS The ability to mount graphics cards up to 340 mm and a maximum CPU cooling height of 155 mm allows the installation of most high-performance components available on the market. PROTECT YOUR COMPUTER FROM DUST DUST FILTERS A dust filter has been placed under the power supply unit. It minimizes the amount of dust sucked in by the PSU's fan, positively affecting its operating temperature and service life. An additional filter is located on top of Cases. This effectively traps unwanted dust and protects the installed components. It protects against dust that enters the computer by gravity throughout the day, even when the computer is turned off. All the effective protection is complemented by mesh mesh on the front panel. OPTIMAL AIR CIRCULATION The ventilated front panel provides airflow with two, efficiently operating 120 mm fans. The back of Cases , on the other hand, features one pre-installed 120 mm fan This allows you to effectively cool the installed components of the computer's interior, positively influencing the culture of their operation and service life. As an option, it is possible to mount two 140 millimeter fans on the front of Cases in place of the factory-installed ones and two 120 or 140 millimeter fans on the top on their own. Case It is also adapted for installation of water cooling. ARGB BEAUTY Case for gamers must look nice. That's why the pre-installed ARGB fans add beauty to the case and the gaming stand. The color of the backlight can be changed at will from the predefined settings using the button on the control panel Cases. Convenient access to the top panel Convenient access to the top panel, and there are two USB 2.0 and one USB 3.0 connectors, plus one minijack connector for headphones and microphone, a power button and a button to control the fan backlight. SIMPLE INSTALLATION Everything here is well thought out and intuitive. Building a computer in this case is a pleasure and is child's play. POWER SUPPLY A gaming computer must have a good and powerful power supply. That's why we made sure that it has a home here! The maximum length of the power supply with the disk cage installed is 200 mm. A dust filter has been placed under the power supply, which effectively protects the operation of the power supply from dust 4 PCIe expansion card slots Four slots for PCIe expansion cards. This is the optimal number for mounting, among other things, a graphics card and a network card. SPACE FOR GAMES IN ABUNDANCE The mounting of HDD or SSD drives is obviously thought out here as well. Inside Cases at tunnel level there is a basket for 3.5" or 2.5" drives. On the motherboard tray, on the other hand, it is possible to mount an additional 2.5" drive. A total of 2 SSDs and 1 HDD or 1 SSD and 2 HDDs can be installed.
PC case Mars MC-XO ATX FRGB fan black The MC-XO is an ATX semi-designed for those who seek the perfect balance between performance and aesthetics. With an optimized design for refrigeration, it incorporates a 120mm rear FRGB fan, a double-chamber system for efficient thermal management and the innovative Sidecool system, which maximizes the side air flow without compromising clean aesthetics and sophisticated from the box. Its modern and functional design makes it an ideal choice for game and professional setups.
Compact gaming case, made of high-quality steel, for SFX PSUs and Mini-ITX/Micro-ATX motherboards (Intel and AMD), GPU up to 363 mm and 2x 2.5-inch drives.
Black case with a closed side Efficient cooling with up to seven fans and a radiator up to 360mm Support for large motherboards up to E-ATX and back-connect Space for graphics cards up to 415mm and CPU coolers with a height of up to 184mm Up to six drives possible Three M25-120mm fans already included PHANTEKS XT Silent: Compact and simple midi-tower The PHANTEKS XT Silent fits into any setup with its simple black design. It offers extensive options for installing your high-end hardware. To keep your system cool even at full power, there is plenty of space for fans and radiators. Effectively cooled with fans and radiators To ensure your high-end components do not overheat even under full load, up to seven fans can be installed in the midi-tower. The top supports either up to three 120mm or two 140mm fans. Additionally, three more 120mm fans can be installed on the mid-plate. The rear also allows for a 120mm or 140mm fan. Furthermore, three PHANTEKS M25-120mm fans are already included in the package. If you prefer water cooling - whether an all-in-one water cooling system or a custom-built water cooling solution - there are two locations to install a radiator. A maximum 360mm radiator can be mounted at the top, and another 120mm radiator at the rear. With these fan and radiator options, your system will not lose performance. Hardware installation The midi-tower supports the installation of large graphics cards up to 415mm in size. Consequently, the current NVIDIA GPUs of the 40 series are also possible. Motherboards up to E-ATX format can be accommodated. To avoid messy cable clutter, you can also install motherboards with back-connect. The CPU cooler should not exceed a height of 184mm. On the other hand, there are hardly any limits for the power supply, as it can be up to 270mm long. To store programs and games, up to six drives can be installed: up to three 2.5-inch SSDs can be placed on the side, two more in the power supply chamber, as well as one 3.5-inch drive.
"Phanteks Enthoo Pro Full Tower Black on kõrgekvaliteediline arvutikapp, mis on mõeldud entusiastidele, kes otsivad oma arvutisüsteemis esteetilisust ja funktsionaalsust. Sellel Full Toweri korpusel on elegantne ja kaasaegne disain, massiivne teraskorpus ja harjatud alumiiniumist viimistlus, mis lisab professionaalset ja elegantset puudutust. Enthoo Pro korpuse ruumikas sisemus pakub ruumi kõige nõudlikumatele komponentidele, sealhulgas laiendatud ATX emaplaatidele, mitmele videokaardile ja mitmetele jahutusvõimalustele. See toetab mitmesuguseid vesijahutuskonfiguratsioone ning selles on palju ruumi suurte radiaatorite ja ventilaatorite jaoks, tagades optimaalse õhuvoolu ja soojusjuhtimise. Korpusel on modulaarsed kõvakettapuurid ja eemaldatavad kettamahutid, mistõttu on seda lihtne paigaldada ja kohandada vastavalt kasutaja vajadustele. Täiendava mugavuse tagamiseks on Enthoo Pro-l mitu kaablijuhtimise võimalust koos strateegiliselt paigutatud tihendite ja velcro-rihmadega, mis hõlbustavad puhast ja organiseeritud kokkupanekut. Esikülje I/O-paneelil on USB 3.0 pordid, audiopistikud ja hõlpsasti ligipääsetav toitenupp, mis parandab kasutajakogemust oma ligipääsetavuse ja funktsionaalsusega. Tänu suurele külgmisele aknapaneelile saavad kasutajad oma sisemisi komponente esitleda, kaitstes neid samal ajal tolmu ja prahi eest. Olenemata sellest, kas oled mängur, professionaal või amatöör-ehitaja, Phanteks Enthoo Pro Full Tower Black pakub täiuslikku tasakaalu disaini, funktsioonide ja jõudluse vahel, et saada oma unistuste arvutiks.
Compact Micro-ATX case in black, made of steel and plastic, for Micro-ATX or Mini-ITX motherboards, four-slot GPU up to 415 mm, compatible with 360 mm radiator.
The Chieftec Pro Mini AZ-01B-OP mini-tower chassis is a compact yet versatile solution for building high-performance systems. It supports mini ATX and microATX motherboards, offering flexibility for various system builds. The chassis includes a comprehensive cooling system with a rear 120 mm fan or radiator, front and top fan mounts capable of supporting up to 280 mm radiators, and additional mounts on the PSU shroud, ensuring optimal airflow and cooling efficiency. For those seeking a quieter computing experience, the Chieftec Pro Mini features sound dampening panels on the front and sides to minimize noise. Additionally, the front panel is equipped with USB-C, USB 3.0, and USB 2.0 ports, along with audio line-out and microphone jacks, providing convenient connectivity options. With its sleek design, efficient cooling, and quiet operation, the Chieftec Pro Mini AZ-01B-OP is an excellent choice for users looking to build a compact, powerful, and versatile system.
The ASUS A23 PLUS is a versatile tower chassis designed for robust performance and minimalistic style. Featuring a microATX form factor, this tower offers ample space for hidden-connector motherboards, enhancing both functionality and aesthetics. With a tempered-glass windowed side panel, users can showcase their build while keeping internal components neatly organized. The design supports a variety of cooling configurations, including the ability to mount an array of fans or radiators, ensuring optimal airflow for system performance. Whether exploring options for future upgrades or building a high-performance system, the ASUS A23 PLUS provides two 2.5" and one 3.5" shared internal bays along with five expansion slots for increased connectivity. Front panel connectors include USB and audio ports, making it easy to connect peripherals. The A23 PLUS stands out for its functionality and sleek appearance that caters to a range of user preferences.
Eleganter Midi-Tower für Gaming-PCs, mit Front aus Eichenholz, kompatibel mit E-ATX Mainboards, Seitenteil aus Mesh-Fläche, bis zu 7x 120-mm-Lüfter oder 8x 140-mm-Lüfter, bis zu 2x 3,5-Zoll oder 4x 2,5-Zoll-Laufwerke, I/O-Panel mit 1x USB 3.1 Typ C und 2x USB 3.0 Typ A
Eleganter Midi-Tower für Gaming-PCs, mit Front aus Walnussholz, kompatibel mit E-ATX Mainboards, Seitenteil aus Temperglas, bis zu 7x 120-mm-Lüfter oder 6x 140-mm-Lüfter, bis zu 2x 3,5-Zoll oder 4x 2,5-Zoll-Laufwerke, I/O-Panel mit 1x USB 3.1 Typ C und 2x USB 3.0 Typ A
Compact Micro-ATX case in white, made of steel and plastic, for Micro-ATX or Mini-ITX motherboards, four-slot GPU up to 415 mm, suitable for 360 mm radiator
ROG Strix Helios II ROG Strix Helios II EATX mid-tower gaming case with dual tempered glass side panels, GPU support for up to 450mm in length, aluminum frame and front panel, GPU braces and 420mm radiator support Premium design: The Helios II is made for showcase builds, with aluminum front panel featuring diamond-grille design and 3D-structured filter to support effective cooling Optimal thermal performance: Pre-installed four 140 x 28mm performance fans deliver ultimate airflow Ready for the DIY experience: PC building is made easy with support for EATX motherboards and graphics cards up to 450mm long, plus a graphics card slot clamp and a rear detachable PSU bracket Tidy PC building: Effortless cable management is enabled by a multifunction cover with graphics card holders, a PSU shroud, a cable cover and rear cable clips Advanced I/O panel: This section features two USB 20Gbps Type-C® ports, four USB-A 3.0 ports, an ARGB-lighting control button and a fan-speed PWM control button Comfortable case straps: Easily carry your prized build to LAN parties with ergonomic and stylish X-shaped woven straps
MÕÕTMED: 215 x 473.5 x 454 EMAPLAADI TUGI: Mini ITX; Micro ATX; ATX GRAAFIKAKAARDI PIKKUS KUNI: 405 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 170 mm TOITEPLOKI ÜHILDUVUS: ATX; 17 cm KAABLITELE RUUM: Olemas KAAL: 7.2 kg Ühenduvus I/O PANEEL: 1 x headphones; 2 x USB 3.0; 1x microphone PCI PESASID KUNI: 7 Kettasahtlid: 4x 2.5" pesa 3x3.5" Ventilaatoritugi: ÜLESSE PAIGALDATUD - 1x Aspect 12 RGB ETTE PAIGALDATUD -2x Aspect 12 ÜLESSE VÕIMALIK PAIGALDADA 2x120/140 TAHA VÕIMALIK PAIGALDADA 1x120 ETTE VÕIMALIK PAIGALDADA 2x120/140 Radiaatoritugi: ÜLEVAL - 240 mm
GIGABYTE C301 GLASS WHITE V2 - Optimized Airflow Design - RGB Fusion with ARGB Connector Hub - Support Motherboards up to E-ATX - Up to 360mm Liquid Cooling Compatible - Support Vertical GPU Installation - Full-Size Tempered Glass Side Panel - With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel - Pre-installed 4 ARGB fans
