Korpused

Zalman Z1 Iceberg

Modecom valge COMPUTER CASE SPACE ARGB

Deepcool CH360 Digital (R-CH360-BKAPE3D-G-1)

Zalman i3 Neo

Thermaltake CTE C700 TG ARGB Snow Chassis CA-1X7-00F6WN-01

Thermaltake korpus The Tower 300 (hellblau, Tempered Glass)

Cooler Master MasterBox 600 (MB600-WGNN-S00)

Modecom Computer case Volcano Perun Apex ARGB Midi must

Horizon ARGB FLOW Midi White Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.

Compact gaming case, made of high-quality steel, for SFX PSUs and Mini-ITX/Micro-ATX motherboards (Intel and AMD), GPU up to 363 mm and 2x 2.5-inch drives

Modecom Computer cases EXPANSE T must

Modecom Computer cases EXPANSE T valge

SilverStone korpus SST-RM600 (must, 6 Höheneinheiten)

Thermaltake korpus The Tower 200 Bumblebee

Thermaltake korpus View 170 TG ARGB (valge, Tempered Glass x 2)

Thermaltake korpus CTE E660 MX (dunkelgrün, Tempered Glass x 2)

Digitus kettaboks External HDD Enclosure DA-71559

INTEL WI-FI 7 BE201 2230 2x2 BE+BT vPro

The M.2 SSD slot / tray is compatible with the ICY DOCK ToughArmor MB840M2P-B M.2 NVMe SSD to PCIe 3.0 x4 hot-swap backplane for a PCIe expansion slot.TypeDrive traysColorsilverEAN4713227445436Manufacturer No.MB840TP-BIntended usePCIe Slot SSD TrayUseDrive frameSuitable forfor ToughArmor MB840M2P-BMaterialMetalInternal connectionsM2FeatureSSD interface: NVMe M.2 (from 30 mm to 110 mm length)DimensionsWidth: 39 mm x Height: 7.5 mm x Depth/Length: 134 mmWeight65 grams

The chassis stand for the Tower 300 Matcha Plum includes a base cover and a display stand. It allows users to position their Tower 300 Matcha Plum horizontally, making it easy to customize the case and create a unique experience. A dust filter is attached to the base plate to provide protection against dust. The chassis stand comes with rubber pads to prevent scratching the chassis during installation. The abrasion-resistant material ensures lasting protection without affecting the surface of the tower. The small elevations of the anti-slip design are strategically placed to provide a secure hold and prevent unwanted movement during use.

THERMALTAKE TOWER 250 SINISE HÜLSS KITSIN TUGI SINI

Fractal Design korpus North XL RC Charcoal must TG Dark (must, Tempered Glass-Version)

Thermaltake korpus The Tower 600 (kollane, Tempered Glass x 3)

DeepCool CG580 4F V2. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Placering af strømforsyning: Bund, Understøttede strømforsyning formfaktorer: ATX, PS2. Sideventilatorer installeret: 3x 120 mm, Understøttede diametre for sideventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 235 mm, Dybde: 437 mm, Højde: 501 mm

Zalman korpus M5 must mATX Mini Tower 4xFans ARGB

Darkflash DS900W computer case without fans (Black).The Darkflash DS900W case combines modernistic design with high functionality - the panoramic glass without A-pillar (A-Pillar) strikingly exposes the interior, and the well-thought-out design ensures stability and easy installation. It supports up to 10 fans and 360mm cooling to ensure efficient heat dissipation. Dust filters protect components, and the large internal space allows for mounting high-performance components. A USB Type-C (Universal Serial Bus, a connector standard used to power or charge electronic devices, as well as transfer data) connector on the front ensures fast and seamless connectivity, while the aesthetically pleasing finish and sturdy construction make it a great choice for those looking to assemble a high-performance and modern PC setup.Minimalist design with a panoramic viewThe Darkflash DS900W is for those looking for a sleek, futuristic design combined with functionality. The woodgrain accent front and double-sided tempered glass construction give the case a unique style and provide a 270° panoramic view of components without a disruptive A-pillar, making the entire interior composition aesthetically pleasing and transparent. With Darkflash, you'll build a stylish gaming space while providing your computer components with maximum protection.Stable design without compromisesThe case is based on a mechanical structure, which is shaped like a closing bracket, which translates into greater rigidity and resistance to deformation. The lack of a classic A-pillar does not negatively affect stability - on the contrary, the whole structure is characterized by high load-bearing capacity and strength, which will be especially appreciated by users building high-performance sets with heavy graphics cards.Powerful cooling without limitsThe DS900W is designed for maximum thermal efficiency. Up to 10 120mm fans can be installed inside, as well as CPU (Central Processing Unit, CPU) cooling up to 170mm high, effectively keeping temperatures down even during heavy use. Additional vents and a metal mesh back panel increase airflow and improve cooling performance by up to 15% while reducing noise levels (10% reduction). This allows you to enjoy pleasant, quiet operation, whether you are playing more demanding titles or using advanced graphics programs.Full protection against dustThe entire chassis has been protected from dust - it uses covers that effectively block particles, pollen and other debris from getting inside. This solution keeps the interior clean, which not only extends the life of components, but also makes them easier to maintain.Thoughtful space for expansionInside, there is no shortage of space for large components. In the DS900W you can mount a graphics card of up to 425 mm in length, as well as a heatsink of up to 360 mm on top and 240 mm on the side. The case supports motherboard formats ATX (Advanced Technology eXtended, standard motherboard and computer case size), M-ATX (Micro Advanced Technology eXtended, motherboard and computer case size smaller than ATX) and ITX (Information Technology eXtended, compact motherboard and computer case format). In addition, 7 PCI (Peripheral Component Interconnect, a connector standard for expansion cards, such as graphics or sound cards) slots provide ample opportunity to expand the kit with more expansion cards. Darkflash thinks of the most demanding gamers who expect reliability from their hardware.Easy access to the Type-C portOn the front of the case is a USB Type-C port, which offers fast data transfer (up to 10 Gbps) and convenient access for various electronic devices. This solution makes the case ready for current hardware standards, being always at your fingertips.Functional details and solid finishThe Darkflash DS900W is equipped with anti-vibration trapezoidal feet, which increase the stability of the design and reduce vibrations. Inside you'll find room for two SSDs (Solid State Drive, solid state drive) and two HDDs (Hard Disk Drive, hard disk drive), and the clear interior layout easily accommodates the components you need, while maintaining order and good air circulation.Includedmotherboard screws x18power supply screws x6hard drive screws x9copper post x3 (6 pieces pre-installed)fan coverclamp x5fan screws x12copper spacerHD audio support x2USB cap x3user manual ManufacturerDarkflashModelDS900WHousing typeMidi TowerSide panelTempered glassMotherboard standardATX, ITX, M-ATXPower supply standardATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots7Max PSU length360 mm on top; 240 mm on the sideMax length of graphics card425 mmMax height of CPU cooler170 mmMax number of fans10Fan mounting optionsTop: 120 mm x3/140 mm x2; Side: 120 mm x3; Rear: 120 mm; Bottom: 120 mm x3Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, Reset, LEDConnectorsType-C x1, USB3.0 x1, USB2.0 x1, HD AudioMaterial0.5 mm SPCCColorBlackHeight454 mmWidth218 mmDepth434 mm

Darkflash DY460 computer case (Black) + 4 fansThe Darkflash DY460 case will allow you to build not only a powerful, but also a great-looking computer. It combines tempered glass panels with a vertical dual-chamber layout, so you can install many different components in it and display them in an interesting way. The model allows rear mounting of selected motherboards, provides space for heatsinks up to 360 mm, and has a built-in USB-C 3.2 Gen 2 port. The compact dimensions (452 x 238 x 541 mm) hide a spacious compartment that can accommodate a graphics card up to 400 mm long and CPU cooling up to 185 mm high. In addition, you'll find four ARGB fans included.Unprecedented cooling performanceThe case allows the installation of up to 10 120 mm fans, providing excellent airflow for the most demanding components. It is also possible to install a 360 mm heatsink on the top or 120/240 mm on the rear. Also noteworthy are the numerous ventilation holes. All this means that you can play AAA games or use demanding software without worry - your computer will not overheat. The kit includes four ARGB fans.Wide expansion possibilitiesBuild a computer perfectly suited to your needs. The Darkflash DY460 case allows you to install a graphics card up to 400 mm horizontally or up to 385 mm vertically (using optional mounting accessories, which are not included). You can also accommodate one SSD and two HDDs. In addition, back-connect mounting of ATX and M-ATX motherboards is possible, which simplifies cable management and improves the aesthetics of the entire setup.Useful portsThe built-in USB-C 3.2 Gen 2 port with up to 10 Gbit/s enables lightning-fast data transfers - useful for graphic designers, video editors, photographers and more. In addition, you'll find USB-A 3.0 and HD Audio connectors on the case, as well as Power and Reset buttons. This makes using the computer convenient and hassle-free!Delightful designTempered glass on three sides of the case provides a 330° panoramic view of the computer's interior, perfectly displaying selected components - such as those with RGB backlighting. Such a solution makes each configuration a real desktop ornament. What's more, the case was created from durable 0.8 mm thick SPCC steel and is effectively protected against dust - it will serve you well for many years.IncludedComputer caseFan x4 ManufacturerDarkflashModelDY460Housing typeBig TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots7Max graphics card lengthHorizontal mounting: 400 m; Vertical mounting: 385 mm;Max CPU cooling height185 mmMax number of fans10Fan mounting optionsSide: 120 mm x3; Rear: 120 mm x1; Top: 120 mm x3; Bottom: 120 mm x3;Water cooling mounting optionsTop: 360 mm; Rear: 120 mm / 140 mm;Number of fans installed4Type of fansARGBButtons and controlsPower, ResetConnectorsUSB-C 3.2 Gen 2 x1, USB-A 3.0 x1, HD audioMaterial0.8 mm SPCCColorBlackHeight541 mmWidth238 mmDepth452 mm

Darkflash F1 computer case (Black) + 6 fansDarkflash F1 is a midi tower computer case created for gamers and custom build enthusiasts. Its modern design with a large tempered glass panel allows to display components in an interesting way and looks great on gaming workstations. It is also distinguished by its spacious interior, which can easily accommodate selected components. It is a combination of elegant design and practical solutions that make assembling and using the computer a real pleasure. The kit also includes six ARGB fans.Spacious interiorDespite its compact size (436 x 240 x 436 mm), the case offers plenty of space for components. It will accommodate graphics cards up to 350 mm in length and CPU coolers up to 200 mm in height. There are also five slots for expansion cards. You can also fit an M-ATX or ITX motherboard and three HDDs or SSDs. So you can easily build both a high-performance gaming PC and a workstation for creative work.Efficient coolingThe Darkflash F1 case supports extensive cooling systems - both air and water. It allows the installation of up to nine fans or a 360/280 mm heatsink. In addition, holes located on the top and rear panels ensure optimal airflow. So you can play dynamic games or use demanding programs without worrying that your computer will overheat! In addition, you will find six ARGB fans in the set, which not only guarantee effective cooling, but also look great - they will give your configuration a unique character.Useful connectors at your disposalA set of useful connectors - two USB-A 3.0 ports, one USB-C port and HD Audio - is located at the bottom of the case. So you can freely connect peripherals, transfer files or use headphones! This makes everyday computer use even more convenient, whether you are gaming, working or streaming.Solid construction and designThe case is made of high-quality SPCC steel with a thickness of 0.8 mm, which guarantees its durability and stability. In addition, tempered glass panels expose the interior, and the whole unit looks extremely modern - a solution that looks great on a gamer's desk and beyond.IncludedComputer caseFan x6 ManufacturerDarkflashModelF1Housing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXSlots for internal drives3.5" HDD x3, 2.5" SSD x3Expansion card slots5Max PSU length200 mmMax length of graphics card350 mmMax height of CPU cooler200 mmMax number of fans9Fan mounting optionsSide: 120 mm x2; Rear: 120 mm x1/140 mm x1; Top: 120 mm x3/140 mm x2; Bottom: 120 mm x3;Water cooling mounting optionsTop: 360 mm / 280 mmNumber of fans installed6Type of fansARGBButtons and controlsPower, ResetConnectorsUSB-A 3.0 x2, USB-C x1, HD audioMaterial0.8 mm SPCCColorBlackHeight436 mmWidth240 mmDepth436 mm

P40 Prism Plus White Case Showcase your build with dazzling design The P40 Prism PLUS, featuring three tempered glass panels, creates a sense of openness and enhances your system build with a modern aesthetic. Premium Tempered Glass Panels With 4 mm thick tempered glass, the P40 Prism PLUS offers exceptional durability. Uninterrupted panoramic view with three-sided tempered glass A new design paradigm eliminates the case frame, giving an open-space feel and an unobstructed view. The front, side, and top tempered glass panels create a seamless look. Tool-free tempered glass panels The front, side, and top panels can be easily and fully removed, providing convenient access to PC components. The top glass panel features a thumb screw for easy handling. Easy panel management with bottom mounting groove The new tapered, tool-free mounting mechanism allows panels to be attached and removed easily, while preventing panel deformation from impacts. Sturdy triangular support structure The solid triangular glass mounting structure can support up to 35 kg, ensuring stability for all three glass panels. Full-mesh side panel for optimal airflow The ventilation opening on the full-mesh side panel is located above the motherboard, providing optimal airflow. Efficient cable management with optimal routing design A 33 mm cable space helps keep cables organized. The convenient layout and spacing make cable management simple and maintain a clean look. Rubber grommets for neat cable management The thoughtfully designed cable layout helps organize cables neatly, ensuring a sleek and tidy appearance.

The View 380 XL TG ARGB Mid-Tower Case is designed for next-generation motherboards and features a unique layout that supports both standard motherboards and motherboards with hidden connectors from ASUS, MSI, and GIGABYTE. The dual-chamber design offers more space, improved cable management, and increased airflow for greater flexibility. The View 380 XL TG ARGB Mid-Tower Case enhances visibility with tempered glass panels on the front and left side, allowing users to showcase their system. For optimal cooling, users can mount a 360 mm radiator at the top and on the motherboard side. The case comes equipped with three hydraulically mounted 120 mm ARGB-Lite reverse fans on the motherboard side and one hydraulically mounted 120 mm ARGB-Lite fan at the rear. The stunning lighting effects can be controlled through motherboard software from ASUS, GIGABYTE, MSI, and ASRock. The integrated GPU bracket prevents graphics card sag and provides extra support. The View 380 XL TG ARGB Mid-Tower Case offers excellent expansion options, supporting a CPU cooler with a maximum height of 160 mm, GPU installation of up to 420 mm in length, and power supplies up to 180 mm long. The case is optimized for superior cooling performance and comes with four hydraulically mounted 120 mm ARGB-Lite fans, with capacity for up to ten 120 mm fans in total. In terms of storage compatibility, it provides maximum support for up to three 2.5" SSDs or a 3.5" HDD. The lower I/O ports include two USB 3.0 ports, one USB 3.2 Gen 2 Type-C port, and an HD audio port, making access convenient when the PC case is placed on a desk.

The Thermaltake View 390 Air mid-tower chassis is the perfect choice for demanding gamers and PC enthusiasts who value functionality and aesthetics. With its modern black design and a host of innovative features, it offers maximum customization and performance. Outstanding hardware support: Space for CPU fans up to 160 mm, graphics cards up to 420 mm, and power supplies up to 200 mm. Expansion options: Up to 11 fans or radiators up to 360 mm for powerful cooling. Compatibility with hidden connector motherboards: Fully compatible with ASUS and MSI hidden connector motherboards for an innovative design. Two pre-installed CT120 fans ensure optimal cooling performance right out of the box. This case is not only a technical powerhouse but also an eye-catcher for any gaming rig. With an excellent price-performance ratio, the Thermaltake View 390 Air is the ideal choice for powerful PC builds. Optimize your gaming experience – now with the Thermaltake View 390 Air! Type Tower case Color purple EAN 4711658544391 Manufacturer No. CA-11F-00MNWN-00 Series View Midi-Tower design Motherboard form factor ATX Material steel, 4 mm tempered glass Window Kit Yes Internal dimensions Plug-in card length maximum 420 mm Supported radiators Front: 120/140/240/280/360 mm, Right side: 120/240/360 mm. 3.5 inch internal drive bays (2 pieces) Slots Full-Size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) Front panel 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed, or 2 x 200 mm fans can be installed Rear 2 x 120 mm fans CT120 pre-installed Notes Dust filter: Front, bottom & side, Right: 3 x 120 mm fans installable, Bottom: 3 x 120 mm fans installable Water cooling possible Yes Rear connection of the mainboard Yes More information Future Dusk Accessory optional LCD display Volume 70 l Dimensions Width: 28.72 cm x Height: 50.2 cm x Depth/Length: 48.5 cm

Darkflash M305 Mesh fanless computer case (White)Darkflash M305 Mesh is a compact M-ATX case that combines futuristic design with practical solutions. It offers a mesh front for better airflow, a tempered glass panel for easy access and presentation of components, the ability to mount as many as 7 fans, support for high-performance graphics cards and CPU (Central Processing Unit, processor) cooling, and a functional I/O panel with a USB 3.0 port (Universal Serial Bus, an interface used for powering and charging devices, as well as for data transfer). Thanks to its well-thought-out design and ample interior space, this model will be perfect for both modern gaming setups and PCs for everyday use.Design and functionalityDarkflash M305 Mesh is an option for those who appreciate minimalist design, functionality and freedom in computer configuration. The front of the case has been made in an industrial style, with a full mesh panel, which first of all provides excellent airflow into the case, but also looks stylish. This solution is especially important for more demanding sets, where proper cooling directly affects the stability of hardware operation.Efficient ventilation and free coolingAlthough the M305 Mesh does not include pre-installed fans, its design has been prepared so that the user can independently select and install up to seven 120mm fans. Such flexibility gives you the opportunity to customize your cooling system - from a basic layout for an office PC to an elaborate gaming setup with advanced cooling. The mesh front not only improves air circulation, but also reduces heat buildup of components even under intense load.Tempered glass for more styleA screw-mounted tempered glass side panel allows you to quickly access the computer's interior without the need for tools. This is especially convenient for frequent kit modifications. At the same time, the transparent panel is great for backlit components, allowing you to expose the computer's interior and create an aesthetically pleasing whole.Compact size that does not limit the possibilitiesThe case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, a very compact motherboard format) motherboards. Despite its small size (325 × 195 × 387 mm), its interior has been designed for maximum functionality. Inside there will be room for a CPU cooler up to 160 mm high and a graphics card up to 300 mm long. This allows it to accommodate most popular components without worrying about compatibility. The chassis also has room for two SSDs (Solid State Drive, a solid state drive) and two traditional HDDs (Hard Disk Drive, a classic hard drive), giving you plenty of room for storage expansion.Functional I/O panel and modern connectorsThe top of the chassis features a well-placed I/O panel with easy access to the most important ports. The presence of a USB 3.0 connector guarantees fast data transfer and convenient connection of external devices such as flash drives, portable drives or other accessories. The clear layout of the top panel simply makes it more convenient to use the computer on a daily basis.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305 MeshHousing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom of caseSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsSide: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1; Top: 120 mm x2.Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorWhiteHeight387 mmWidth195 mmDepth325 mm

Das Xilence Xilent Flare X909.ARGB kombiniert moderne Aquarium-PC- Optik mit starker Ausstattung zum fairen Preis. Das stabile Gaming Gehäuse bietet Platz für ATX-, micro-ATX- und mini-ITX-Mainboards sowie auch größere Komponenten wie Grafikkarten bis 440 mm und CPU- Kühler bis 180 mm. Für eine starke Kühlung und stylische Beleuchtung sorgen drei ARGB- Lüfter in der Front und ein ARGB-Lüfter im Heck, gesteuert über das integrierte PWM/ARGB-Control Board. Besonders praktisch: Die seitlich platzierten I/O-Anschlüsse ermöglichen bequemen Zugriff auf USB-Ports und Tasten, ideal, wenn das Gehäuse auf dem Schreibtisch steht. Mit durchdachtem Kabelmanagement, welches auch das Anschließen des Mainboards von hinten ermöglicht und robustem Aufbau ist das Xilent Flare X909.ARGB die clevere Wahl für preisbewusste Gamer und Systemintegratoren. Mit vier vorinstallierten ARGB Lüftern, integriertem PWM/ARGB-Controller, bietet das Flare X909.ARGB starke Features.

DarkFlash DS900G computer case (black)DarkFlash DS900G is a Middle Tower chassis that offers extensive functionality for demanding users. It supports ATX, Micro-ATX and ITX format motherboards, and its interior accommodates graphics cards up to 425 mm in length and CPU coolers up to 170 mm in height. The interior space is designed for easy access to components and convenient expansion. The DS900G also offers full support for various cooling systems, so it can easily handle demanding gaming or work setups.Full interior displayThe curved side panel made of transparent tempered glass allows a full view of the components installed inside. The slightly rounded surface of the glass creates a panoramic effect that sets the case apart from standard models and allows the backlighting and mounting aesthetics to be fully exposed.Effective coolingThe case is designed for optimal air circulation. It allows the installation of up to 10 120 mm fans or their combination with 2 140 mm fans on the top panel. The design provides for 3 fans on the top, 3 on the side, 1 on the back and 3 on the bottom, allowing for a very efficient cooling system. In addition, up to 360 mm of water cooling can be installed on the top panel, and up to 240 mm on the side.Optimized airflow and noise reductionThe DS900G chassis features densely spaced vents that not only improve airflow, but also effectively trap larger dust particles. The rear panel is equipped with a steel mesh that improves cooling efficiency by up to 15% while reducing noise levels by about 10%.Magnetic dust filtersThere are magnetically attached dust filters on the top and bottom of the case. As a result, they can be easily removed and cleaned without removing other components. This type of solution simplifies the daily maintenance of the computer and helps maintain optimal operating conditions for components.Various expansion possibilitiesThe interior of the chassis was designed for users who want to keep the chassis aesthetically pleasing and tidy, while still having room for all the components they need. The DS900G offers 7 PCIe slots, which gives you the freedom to mount long graphics cards and additional expansion cards. The mounting space has been planned to ensure adequate airflow, room for cable routing and the ability to quickly access critical components.Flexible disk mounting optionsDarkFlash DS900G allows the installation of 2 HDDs in 3.5" format and 2 SSDs in 2.5" format. Depending on the user's needs, various configurations are possible, such as two HDDs and one SSD or one HDD and two SSDs. This allows each user to tailor the storage layout to their own preferences and the specifics of the set.Convenient access to ports and buttonsThe case offers a practical set of ports and buttons on the front panel. The user has one USB 3.0 and two USB 2.0 ports, as well as an HD Audio connector. The front also features Power, Reset and backlight control buttons. ManufacturerDarkFlashModelDS900GHousing typeMiddle TowerSide panelTempered glassMotherboard standardATX, Micro-ATX, ITXPower supply standardATXSlots for internal drives2 × 3.5" (HDD)2 × 2.5" (SSD)Expansion card slots7 PCIe slotsMax graphics card length425 mmMax CPU cooling height170 mmMax number of fansUp to 10 120 mm fansIn addition: 2 140 mm fans (top)Fan mounting optionsTop: 3 × 120 mm or 2 × 140 mmSide: 3 × 120 mmRear: 1 × 120 mmBottom: 3 × 120 mmWater cooling mounting optionsTop: up to 360 mm or 240 mmSide: up to 240 mmNumber of fans installedNo fans installedButtons and controlsPower, ResetConnectors1 × USB 3.02 × USB 2.01 × HD AudioMaterialSPCC 0.5 mmColorBlackHeight454 mmWidth218 mmDepth434 mm

The APNX V2-F is a premium PC case designed for excellent cooling, elegant aesthetics, and flexibility. Its three removable tempered glass panels provide a frameless panoramic view, while the X-Pand Flow design significantly improves overall airflow dynamics. With support for up to 13 fans, 360 mm radiators, and two 16 cm fans at the bottom, it delivers top-class thermal performance. The V2-F supports standard motherboards with reverse connectors for cleaner cable management. Features such as a GPU holder, removable motherboard cable cover, and an interchangeable PSU/HDD compartment enhance durability and customization options. With vertical or horizontal 360 mm AIO mounting and support for the APNX 10-port fan hub, the APNX V2-F offers efficient cooling and effortless customization for high-performance builds.

Das APNX V2-F ist ein Premium-PC-Gehäuse, das für hervorragende Kühlung, elegante Ästhetik und Flexibilität entwickelt wurde. Seine drei abnehmbaren Hartglasplatten bieten einen rahmenlosen Panoramablick, während das X-Pand Flow Design die gesamte Luftströmungsdynamik erheblich verbessert. Mit Unterstützung für bis zu 13 Lüfter, 360-mm-Kühler und zwei 16-cm-Lüfter an der Unterseite sorgt es für eine erstklassige Wärmeleistung. Das V2-F unterstützt gängige Mainboards mit Reverse-Anschluss für ein übersichtlicheres Kabelmanagement. Funktionen wie eine GPU-Halterung, eine abnehmbare Mainboard-Kabelabdeckung und ein austauschbares PSU/HDD-Fach verbessern die Haltbarkeit und Anpassungsmöglichkeiten. Mit vertikaler oder horizontaler 360-mm-AIO-Montage und Unterstützung für den APNX 10-Port-Lüfter-Hub bietet das APNX V2-F eine effiziente Kühlung und mühelose Anpassungsmöglichkeiten für Hochleistungs-Builds.

The Inter-Tech 4U-465M2 is a 4U rackmount server chassis for professional server, storage and virtualization applications. A special feature of the case is the ability to operate two independent Mini-ITX systems in a single 19-inch case. This makes it suitable, for example, for redundant servers, cluster solutions or energy-efficient dual server configurations. Each of the two systems has its own front connection, each with two USB 3.2 Gen1 ports and can be operated with a separate ATX power supply. A total of up to six internal 3.5-inch drive slots are available for data storage, making the case also suitable for NAS or backup servers. The cooling system consists of three centrally located 120 mm fans that ensure airflow throughout the entire case. In addition, each motherboard has two 40 mm fans on the back, so that both systems are cooled independently and reliably. CPU coolers can be up to 145 mm high. With its dimensions of 480 × 692 × 178 mm (W × D × H), the housing corresponds to the standardized 4U rack format and can be easily integrated into 19-inch server cabinets. The robust steel housing is designed for continuous 24/7 operation and weighs around 14.4 kg. The 4U-465M2 is aimed primarily at professional users who want to operate two compact servers in a common rack housing. In contrast to classic 4U cases for large ATX or E-ATX systems, the focus here is not on graphics cards or workstation hardware, but rather on high availability, efficient use of space and reliable continuous operation Type server case Color black EAN 4260455649964 Manufacturer no. 88887424 Rack design Mainboard form factor Mini-ITX Internal dimensions CPU cooler height maximum 145 mm Internal dimensions power supply form factor ATX Internal dimensions height units 4 U Drive bays 3.5 inches internal Front ports 4x USB-A 3.2 Gen 1 (5 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Notes Center: 3 x 120 mm fans pre-installed, motherboard back: 2 x 40 mm fans each pre-installed Rear connection of the mainboard No Feature support for 2x Mini-ITX motherboards, 2x ATX power supplies for independent power supply Further information Cage: 430 x 662 x 174mm (WxDxH) Accessories available screw assortment Volume 58 l Dimensions Width: 48 cm x Height: 17.4 cm x Depth/Length: 69.2 cm Weight 14.4kg

Darkflash DS900WD ATX computer case (White) + 4 fansDarkflash DS900WD is an enclosure designed for users who want practical solutions. The tempered glass side panel and wooden front panel provide good visibility of components and give the whole case a distinct look. It allows the installation of motherboards in ATX (Advanced Technology eXtended, a standard motherboard format), M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) formats, giving you great flexibility when building your computer. With a spacious design and multiple mounting options, it provides convenience in assembling the kit and good air circulation. The kit comes with 4 fans.Various cooling optionsThe DS900WD offers space to install 12 120 mm fans or 2 140 mm fans and water cooling at the top 360 mm or 240 mm, and at the front 240 mm. This allows you to build an effective cooling system for powerful configurations. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation. As standard, the chassis is equipped with 4 fans to promote air circulation right from installation.Thoughtful layout and ample spaceThe chassis will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. There are seven PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots, allowing the kit to be expanded with additional expansion cards. For storage media, space is provided for two HDDs (Hard Disk Drive, hard drive) or one SSD (Solid State Drive, solid state drive) and one HDD, so you won't run out of space for games and files.Built-in portsThe Darkflash DS900WD chassis is equipped with a set of the most commonly used ports that make everyday use of the computer easier. On the top panel you'll find one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), while 2 additional USB 2.0 ports are ideal for connecting a mouse, keyboard, headphones or other accessories. There is also an HD Audio (High Definition Audio, a high-quality audio connector) for convenient connection of headphones and a microphone.Refined detailsOn the right side of the case is a metal mesh that not only provides adequate ventilation, but also blocks larger dust particles from entering the case. What's more, the top and bottom mesh panels also protect your equipment from debris, and their magnetic design makes them easy to install and remove.Durable construction and stylish designThe body of the case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - structural steel), which ensures high durability. The whole thing measures 470 x 218 x 454 mm and fits into standard under-desk spaces. The stylish design and the ability to illuminate the fans make the set look modern.Includedcomputer casefan x4user manual ManufacturerDarkflashModelDS900WD ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installed4Type of fansINF24T ARGBButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight454 mmWidth218 mmDepth470 mm

Darkflash DS900WS computer case (White) + 4 ARGB fansDarkflash DS900WS is a modern solution for demanding users who value both aesthetics and functionality. The distinctive design with a wood and metal front and tempered glass side panel, not only looks striking, but also provides excellent visibility of components. The case is designed to provide optimal cooling, performance and versatility, while offering ease of modification and expansion of computer systems. The kit includes 4 fans.Effective coolingEvery computer needs a good cooling system, and the DS900WS provides it without question. The ability to mount up to 12 120 mm fans and water cooling makes the case ideal for those who expect high performance and reliability, especially during intensive use. In addition, 4 high-performance fans are included, which blend perfectly with the interior of the case.Protection and ease of useThe case is designed to protect the computer's interior from dust, which is important for maintaining cleanliness and performance. In addition, its well-thought-out design makes it easy to upgrade and expand components, which is especially useful for users who want to build exactly the system they want. What's more, the DS900WS offers an HD Audio (High Definition Audio, a high-definition audio connector) port, USB3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector) x1 and USB2.0 x2, allowing other devices to be connected to the chassis.Compatibility and expansionThe Darkflash DS900WS is compatible with a wide range of motherboards, including ATX (Advanced Technology eXtended, a standard motherboard format), M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format), giving users freedom of choice and flexibility in configuring their systems. In addition, 7 PCI (Peripheral Component Interconnect, an interface for expansion cards) slots allow further expansion and customization of the chassis.Durability and aestheticsThe Darkflash DS900WS is an enclosure built with durability in mind. The support mechanism and sturdy construction provide stability and security for all computer components, which is especially important for system expansion.Includedcomputer caseARGB fan x4 ManufacturerDarkflashModelDS900WSHousing typeMidi TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXPower supply standardATX at the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x2Expansion card slots7Max PSU length250 mmMax length of graphics card425 mmMax height of CPU cooler170 mmMax number of fans12Fan mounting optionsTop: 120 mm x3 or 140 mm x2 fan; Rear: 120 mm x1 fan; Side: 120 mm x2 fan; Bottom: 120 mm x3 fan; Front: 120 mm x3 fan.Water cooling mounting optionsTop: 240 / 360 mm; Front: 240 mmNumber of fans installed4Type of fans installedARGB, INF24TButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB2.0 x2, HD AudioMaterialTempered glass, 0.5 mm SPCCColorWhiteHeight454 mmWidth218 mmDepth470 mmWeight6.53 kg

Compact ATX mid-tower with tempered glass, integrated 7-inch LCD, targeted cooling from below and the side, 360mm radiator support Do you want to not only showcase your hardware but also give your build a personal touch? The Phanteks XT V5 LCD combines a tempered glass side panel with a built-in 7-inch display. You can use it to show system information or your own images, while the fan layout at the bottom and side supplies fresh air to your gaming hardware. Integrated 7-inch LCD: For system information and custom content Showcase design: Tempered glass reveals your hardware Targeted cooling: Fan positions at the bottom and side For larger water cooling setups: Supports radiators up to 360 mm Lighting included: Pre-installed RGB fans Flexible hardware compatibility: For ATX, Micro-ATX, and Mini-ITX The 7-inch LCD makes your build more personal The integrated display gives your PC a special visual highlight. You can display system values or your own images and graphics on it, designing the case to match your setup. Combined with the tempered glass side panel, this creates a build where both the installed components and the display are part of the overall look. Important system values at a glance You can show system information on the integrated LCD. This way, you don’t have to keep an additional program open on your monitor to check important values constantly. Clear view of hardware and lighting The tempered glass side panel keeps your graphics card, motherboard, RAM, and RGB lighting visible. The display complements this showcase look without overshadowing the actual hardware. The black case provides a subtle frame and gives you plenty of freedom when choosing your components and lighting. Fresh air from below and the side The possible fans at the bottom and side direct cool air straight to the central components. The graphics card especially benefits from the airflow coming from the lower section. Pre-installed RGB fans support air exchange while adding visible light accents behind the glass panel. Design and cooling intelligently combined While the LCD and glass panel showcase your build, the ventilation directed at the bottom and side supplies fresh air to the graphics card, motherboard, and CPU cooling. Space for a 360 mm radiator For cooling your processor, the Phanteks XT V5 LCD supports a radiator up to 360 mm. This allows you to integrate a larger water cooling setup into your build. Additional fans give you the option to adjust airflow to your hardware and desired noise level. Spacious interior for your gaming PC The case supports ATX, Micro-ATX, and Mini-ITX motherboards as well as current graphics cards, powerful processors, and full-sized power supplies. Separate slots for SSDs and HDDs provide space for games, programs, and personal data. Cable routing holes and mounting points help you manage cables behind the motherboard tray, keeping the visible area tidy.

The FSP U660 is a powerful server and workstation case for professional systems with high storage and performance requirements. It was developed specifically for users who want to combine extensive storage capacity, powerful hardware and flexible configuration options in one housing. With space for up to 18 3.5-inch hard drives and additional mounting options for 2.5-inch SSDs, the U660 is ideal for storage servers, backup systems, high-performance workstations and data-intensive applications. The generously sized housing supports motherboards in EEB, E-ATX, ATX, Micro-ATX and Mini-ITX formats and thus offers a high level of flexibility when selecting components. Up to 420 mm of space is available for powerful graphics cards, while CPU coolers can reach a maximum height of 180 mm. With nine expansion slots and the option of vertically mounting a graphics card, the system can be individually adapted to different requirements. The FSP U660 also offers extensive cooling options. In addition to numerous positions for case fans, the case supports radiators up to 360 mm in size. This makes it also suitable for powerful processors and systems that operate under high continuous load. The well-thought-out interior design supports efficient airflow and makes it easier to build powerful hardware. The U660 combines its high storage capacity with a robust construction made of 0.8 mm thick SPCC steel. With dimensions of 450 × 258 × 568 mm and a weight of around 11.6 kg, the case offers enough space for extensive hardware configurations, but remains comparatively compact for a case of this configuration. Two USB 3.0 ports and one USB Type-C port are available on the front for modern peripheral devices. The U660 combines its high storage capacity with a robust construction made of 0.8 mm thick SPCC steel. With dimensions of 450 × 258 × 568 mm and a weight of around 11.6 kg, the case offers enough space for extensive hardware configurations, but remains comparatively compact for a case of this configuration. Two USB 3.0 ports and one USB Type-C port are available on the front for modern peripheral devices. Whether as a powerful storage server, backup system, media workstation or basis for sophisticated AI and rendering applications - the FSP U660 offers a versatile basis for professional systems. Big tower case type Color black EAN 4711498482594 Manufacturer no. POC0000310 Server tower design Mainboard form factor E-ATX, SSI-CEB, SSI-EEB Material 0.8mm SPCC Internal dimensions plug-in card length maximum 420 mm Internal dimensions CPU cooler height maximum 180 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 230 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 9 pieces Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Front 4 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed Rear 1 x 120 mm fan can be installed, alternatively 1 x 140 mm fan can be installed Notes Vertical mounting of a graphics card possible, side: 4 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed, 3 x 120 mm fans can be installed, alternatively 3 x 140 mm fans can be installed Water cooling possible. Supported radiators top: 360 mm Rear connection of the mainboard No Volume 66 l Dimensions Width: 25.8 cm x Height: 56.8 cm x Depth/Length: 45 cm Weight 11.6kg