Tootekood: D32 PRO MESH WHITEGTIN: 6970620554358Korpused
With the D32 series, Jonsbo targets anyone wanting to build their PC in a space-saving manner. Unlike the D32 STD, the D32 PRO PC case offers special and practical features like Back-Connect or improved front I/O, making it aimed at the high-end segment. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for Back-Connect motherboards Mesh side panel for a subtle appearance Plenty of space for cooling solutions, allowing for high-performance hardware installation Three dust filters protect your hardware from annoying dust particles The Jonsbo D32 PRO Mesh: Space-saving and subtle case for high-end hardware Whether midrange HTPC or high-end PC – the D32 PRO Mesh from Jonsbo comfortably fits a variety of build types. This minimal case accommodates graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height. In Back-Connect mode, the maximum CPU cooler height is reduced by just under seven millimeters. This means that even with the compact design of the case, adequate cooling for your hardware is ensured. Combined with up to six 120 mm fans or one 120 mm fan and four 140 mm fans, the case provides enormous airflow inside. No cable clutter with Back-Connect With Back-Connect motherboards, such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case in B-mode with around six to seven millimeters additional space is almost completely free of visible cable clutter. Because most power and connection cables can be routed to the back of the motherboard, cable management is no longer necessary, and you still get a clean look inside your case. Powerful cooling in a compact space So your high-performance hardware stays adequately cooled in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AiO, your hardware will remain cool even under load. Three dust filters on the front, top, and bottom ensure your hardware stays free from dust and dirt. As a result, your temperatures will always be at optimal levels, and the lifespan of your hardware will be extended.
The Phanteks XT M3 impresses with a space-saving design that offers you more than enough room for high-end components. With effective cooling and tidy cable management, the case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact size: Space-saving case for high-end hardware Effective cooling: Space for up to nine fans Large radiator: Supports installation of a 360 mm radiator on the top Tidy build: Room for excellent cable management Back-connect support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini-case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SFF case built for big things. Compatible with high-end graphics cards and motherboards supporting back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports the installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360-mm radiator can be fitted on top if you prefer water cooling. Besides fans and a radiator, the mesh front also ensures very good airflow. This helps prevent hot air from accumulating inside your case. Your new gaming PC with clean cable management Managing cables neatly is not easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also improves airflow. Mini-ITX case built for powerful hardware Even a large graphics card fits in effortlessly—the case offers space for a GPU up to 430 mm in length. Note that you cannot install fans at the front if you use the maximum GPU length. The CPU cooler should not exceed a height of 175 mm, and the power supply should not be longer than 150 mm.
MSI PRO SHIELD M100P. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Bagerste ventilatorer installeret: 1x 80 mm, Understøttede diametre for bagerste ventilatorer: 80,90 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 166 mm, Dybde: 312 mm, Højde: 354 mm. Pakkevægt: 3,58 kg
Spacious mid-tower case with tempered glass side panel, supports up to 6 fans, space for radiators up to 360 mm, compatible with motherboards up to Micro-ATX, accommodates GPUs up to 365 mm long and CPU coolers up to 163.5 mm tall, supports up to three drives, and includes four 120 mm ARGB fans.The Cooler Master Elite 302 is a versatile mid-tower case designed for budget-friendly PC builds that prioritize efficient airflow, contemporary interfaces, and ample room for today’s hardware. Perfect for compact gaming or all-purpose systems. Fine mesh front panel maximizes internal airflow Compatible with Micro-ATX and Mini-ITX motherboards Supports graphics cards up to 365 mm and CPU coolers up to 163 mm Room for up to 6 fans or a 360 mm front radiator Front panel with USB 3.1 and HD audio ports Compact design with effective ventilation The Elite 302 features an open mesh front that significantly enhances airflow to both CPU and GPU. Four 120 mm fans come pre-installed, and there is space to add up to two additional fans or mount a 360 mm radiator at the front. Spacious interior despite compact footprint With support for graphics cards up to 365 mm in length and ATX motherboards, the case provides sufficient room for modern components. CPU coolers up to 163 mm high and power supplies up to 160 mm long can be easily accommodated. Robust features for modern setups The case front comes equipped with two USB 3.1 ports and HD audio. Dust filters on the bottom, front, and top keep your system clean, while the minimalist design and white finish blend into any environment.
Midi tower with optimized airflow, mesh front, compatible with up to E-ATX, 195 mm CPU cooler height clearance, radiator support up to 360 mm, SimpliCable cable management & magnetic panels The HAVN BF 360 is perfect for gamers and hardware enthusiasts who don’t want to compromise: solid cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUSpace for up to seven fans or two 360mm radiatorsCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm space – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360HAVN BF 360: Airflow meets styleThe front features a distinctive ribbed mesh that draws air in precisely and reduces flow losses. An integrated guide with a 135° angle directs fresh airflow straight onto the GPU and CPU – for maximum cooling without heat buildup. Flexible mounts for fans or radiators are included, whether you prefer air or water cooling.HAVN BF 360 side viewCooling power for your high-end hardwareThere is room for up to seven fans: 3x front, 3x top, and 1x rear. Alternatively, you can install radiators up to 420 mm at the front. With 195 mm CPU cooler height clearance and a spacious interior, you have plenty of room for large air coolers or custom loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at maximum performance.HAVN BF 360 rear side viewCompatibility without compromisesThe BF 360 offers enough space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm of room for graphics cards – suitable for current RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restrictions. Two modular drive trays can hold either 2x 2.5-inch or 1x 3.5-inch drives – naturally vibration-damped for quiet operation.HAVN BF 360 rear motherboard traySimpliCable & magnetic panels – smart & stress-freeSimpliCable provides pre-made cable routes, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grip edges and a practical pull strap – maintenance and upgrades have never been so easy.HAVN BF 360 I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re well equipped for the future, whether for gaming or as a workstation.
Midi tower with optimized airflow, mesh front, compatible with up to E-ATX, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels The HAVN BF 360 is perfect for gamers and hardware enthusiasts who want no compromises: robust cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and innovative SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUSpace for up to seven fans or two 360 mm radiatorsCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm clearance – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360HAVN BF 360: Airflow meets styleThe front features a distinctive ribbed mesh that draws in air precisely and reduces flow resistance. An integrated guide with a 135° angle directs fresh airflow straight to the GPU and CPU – for maximum cooling without heat buildup. Flexible mounts for fans or radiators support both air and water cooling solutions.HAVN BF 360 side viewCooling power for your high-end hardwareThe interior accommodates up to seven fans. Alternatively, you can install radiators up to 420 mm at the front. With clearance for CPU coolers up to 195 mm tall and a spacious interior, there is plenty of room for large air coolers or custom water-cooling loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at peak performance.HAVN BF 360 side rearCompatibility without compromiseThe BF 360 offers ample space for motherboards up to E-ATX (maximum 277 mm wide). It provides a generous 410 mm clearance for graphics cards – perfect for current RTX and Radeon models.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restrictions. Two modular drive trays can accommodate either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you get pre-defined cable routes, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grip edges and a practical pull tab – maintenance and upgrades have never been so effortless.HAVN BF 360 I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C port, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re ready for the future, whether gaming or working.
Midi tower with airflow optimization, mesh front, compatible up to E-ATX, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels, three pre-installed fans The HAVN BF 360 Flow is ideal for gamers and hardware enthusiasts who demand no compromises: solid cooling performance, smart design, and full compatibility. With aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management, this case provides the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUThree pre-installed fans: 2x 180 mm & 1x 140 mmCompatible with E-ATX motherboards up to 277 mm wideGPU bracket & 410 mm space – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & clean cable managementHAVN BF 360 FlowHAVN BF 360 Flow: Airflow meets styleThe front features a distinctive ribbed mesh that draws in air precisely and reduces flow loss. An integrated guide with a 135° angle directs fresh airflow straight onto the GPU and CPU – providing maximum cooling without heat buildup. Flexible mounts for fans or radiators are included, supporting both air and water cooling solutions.HAVN BF 360 Flow side viewCooling power for your high-end hardwareUp to six fans can be installed. The three pre-installed fans deliver plenty of fresh air right out of the box. Alternatively, radiators up to 360 mm can be mounted at the front and top. With a CPU cooler height of 195 mm and a spacious interior, there’s ample room for large air coolers or custom water cooling loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation, even at peak performance.HAVN BF 360 Flow rear side viewCompatibility without compromiseThe BF 360 offers enough space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm clearance for graphics cards – perfect for current RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit in the lower compartment without restriction. Two modular drive trays can accommodate either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 Flow rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you benefit from pre-routed cables, straps, and wide channels for super-fast and tidy cable management. The front and top panels are magnetically attached, with rubberized grips and a practical pull tab – maintenance and upgrades have never been easier.HAVN BF 360 Flow I/O panelModern I/O panel for your setupThe I/O includes a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. With the BF 360, you’re well equipped for the future, whether you’re gaming or working.
Midi tower with optimized airflow, mesh front, compatible with up to E-ATX motherboards, 195 mm CPU cooler height, radiator support up to 360 mm, SimpliCable cable management & magnetic panels, three pre-installed fans The HAVN BF 360 Flow is ideal for gamers and hardware enthusiasts who accept no compromises: solid cooling performance, smart design, and full compatibility. Aerodynamically optimized airflow, a flexible interior, and clever SimpliCable cable management make this case the perfect foundation for your high-end build.Airflow cover for targeted cooling of GPU and CPUThree pre-installed fans: 2x 180 mm & 1x 140 mmCompatible with E-ATX motherboards up to 277 mm wideGPU support bracket & 410 mm clearance – ready for RTX 50 SeriesMagnetic panels & SimpliCable – quick maintenance & tidy cable managementHAVN BF 360 FlowHAVN BF 360 Flow: Airflow meets styleThe front features a striking ribbed mesh that precisely draws in air and reduces flow loss. An integrated 135° guide directs cool air directly onto the GPU and CPU for optimal cooling without heat buildup. Flexible mounts for fans or radiators are included, suitable for both air and water cooling configurations.HAVN BF 360 Flow side viewCooling power for your high-end hardwareThere is space for up to six fans. The three pre-installed fans ensure a strong supply of fresh air right out of the box. Alternatively, radiators up to 360 mm can be installed at the front and top. With 195 mm of CPU cooler height clearance and a spacious interior, you have enough room for large air coolers or custom water loops. Anti-vibration rubber mounts on every bracket ensure whisper-quiet operation at peak performance.HAVN BF 360 Flow side rearCompatibility without compromiseThe BF 360 offers ample space for motherboards up to E-ATX (max. 277 mm). There’s a generous 410 mm of clearance for graphics cards – perfect for the latest RTX and Radeon powerhouses.The integrated, adjustable GPU bracket reliably prevents GPU sag. Power supplies up to 200 mm fit comfortably in the lower compartment. Two modular drive trays can hold either 2x 2.5-inch or 1x 3.5-inch drives – all vibration-damped for quiet operation.HAVN BF 360 Flow rear motherboard traySimpliCable & magnetic panels – smart & stress-freeWith SimpliCable, you get pre-configured cable routing, straps, and wide channels for ultra-fast, tidy cable management. The front and top panels attach magnetically, with rubberized grip edges and a handy pull strap – maintenance and upgrades have never been so easy.HAVN BF 360 Flow I/O panelModern I/O panel for your setupThe I/O panel features a USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 2 Type-A ports, and an HD audio jack – perfect for your peripherals and headsets. This means the BF 360 is fully equipped for the future, whether as a gaming rig or workstation.
Beautifully crafted and engineered to maximize cooling potential with its amazing expansion flexibiltiy, the Enthoo Pro is the budget friendly full-tower from Phanteks. Embracing many features from the Enthoo Primo, without the price tag. This case has multiple radiator support, removable SSD bracket, closed HDD panel, and velcro cable management. The Enthoo Pro, trying to establish its own solid reputation like the award winning Enthoo Primo.KujutegurFull-TowerTüüpPCMaterjalPlast, Teras5,25" lahtrite arv33,5" lahtrite arv6Emaplaadi toetatud kujuteguridATX,EATX,Mini-ATXToote värvMustAknagaJah2,5" salvede arv7Sisseehitatud kõlar(id)EiCPU jahuti maksimaalne kõrgus19,3 cmGraafikakaardi maksimaalne pikkus47,2 cmKaasas toiteplokkEiToiteploki asukohtPõhiUSB 2.0 portide arv2USB 3.0 (3.1 Gen 1) A-tüüpi portide hulk2AudiosisendJahAudioväljundJahInstallitud esiventilaatorid1x 200 mmMaksimaalne esiventilaatorite arv2Toetatud esiventilaatorite läbimõõt120,140,200 mmMaksimaalne tagaventilaatorite arv1Toetatud tagaventilaatorite läbimõõt120,140 mmMaksimaalne ülemiste ventilaatorite arv3Toetatud ülemiste ventilaatorite läbimõõt120,140,200 mmMaksimaalne alumiste ventilaatorite arv2Toetatud alumiste ventilaatorite läbimõõt120,140 mmVentilaatori kiirus1200Toetatud kõvakettasuurused2.5,3.5"Integreeritud kaardilugejaEiJuhtmehaldusJahLähtestusnuppJahLaius235 mmSügavus550 mmKõrgus535 mmJuhendJahKasutusjuhendJahPakendi kaal11,9 kg
Markenqualität zu einem unschlagbaren Preis bietet das neue LT-01B-350GPB. Zeitloses Design, hochwertige Fertigung mit dem entscheidenden Mehr an Extras lassen keine Wünsche offen.
"Zalman T6 ATX Mid Tower PC korpus koos 120 mm ventilaatori ja ODD-ga on ideaalne valik mängijatele ja tehnikahuvilistele, kes otsivad usaldusväärset ja stiilset korpust oma PC komponentide jaoks. See Mid Toweri korpus on elegantse ja minimalistliku disainiga, mille must väliskuju sobib hõlpsasti mis tahes konfiguratsiooni, pakkudes samas piisavalt ruumi riistvarakomponentidele. See toetab ATX, Micro-ATX ja Mini-ITX emaplaate, mistõttu ühildub see paljude erinevate konfiguratsioonidega. Korpusesse on eelnevalt paigaldatud 120 mm tagumine ventilaator, mis hõlbustab tõhusat õhuvoolu ja jahutusjõudlust kohe karbist väljudes, hoides teie süsteemi koormuse all sujuvalt töös. Nende jaoks, kes vajavad täiendavat jahutust, on korpusel mitu ventilaatori kinnituspunkti, mis tagavad parema temperatuuri kontrolli. Lisatud optilise kettaseadme (ODD) pesa muudab selle mitmekülgseks kasutajatele, kes vajavad endiselt kettamälu funktsionaalsust, ning lisab kaasaegsetele arvutitele nostalgia hõngu. Sees pakub Zalman T6 nutikat paigutust koos spetsiaalse kaablijuhtimise kohaga, mis mitte ainult ei paranda esteetikat, vaid optimeerib ka õhuvoolu kogu korpuses. See toetab kuni 280 mm pikkuseid videokaarte, kuni 165 mm kõrguseid protsessorijahuteid ja kuni 180 mm pikkuseid toiteallikaid, võimaldades võimsaid konfiguratsioone. Esipaneel pakub olulisi ühendusvõimalusi, sealhulgas USB 3.0 ja USB 2.0 pordid, samuti audiopistikuid, mis võimaldavad mugavat juurdepääsu välisseadmetele ja multimeediaseadmetele. Seadmepesa tööriistadeta disain lihtsustab paigaldus- ja uuendamisprotsesse, muutes selle kasutuse lihtsaks igasuguse kogemustasemega disainerite jaoks. Kokkuvõttes ühendab Zalman T6 ATX Mid Tower funktsionaalse disaini ja praktilised omadused, mis teeb sellest täiusliku valiku tasakaalustatud ja suure jõudlusega lauaarvuti jaoks.
Edler Big-Tower von PHANTEKS, Seitenteil aus Tempered Glass, optimiert für Luft- und Wasserkühlung, bis zu 503 mm lange Grafikkarten, adressierbare RGB-LED-Beleuchtung, für Dual-Systeme und Dual-PSU-Systeme geeignet
DIMENSIONS : (D)420mm X (W)269.5mm X (H)380mm MOTHERBOARD : E-ATX (Max 280 mm wide)/ATX/ Micro-ATX/ Mini-ITX PSU : SFX/ SFX-L MATERIAL : Steel 4 mm Tempered Glass 2mm Aluminum (top and left panel) FAN SUPPORT : Top: 3x 120mm or 2x 140mm Side: 2x 120mm or 2x 140mm Bottom: 3x 120mm or 2x 140mm Rear: 1x 120mm RADIATOR SUPPORT : Top: 360mm or 280mm or 240mm radiator Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE : 395mm CPU COOLER HEIGHT CLEARANCE : 170mm VGA Length : 370mm DRIVES : Right side 2 x 2.5″ SSD + back plate 2 x 3.5″ HDD (or SSD) EXPANSION SLOTS : 3 or 5 or 7 slots (depends on back panel) IO PORTS : 2 x USB 3.0, 1 x USB 3.1 TYPE-C, 1 x HD Audio, Power Button DUST FILTERS : 1 x Top, 1 x Bottom, 2 x Side
Tootjainfo: http://kolink.eu/Home/case-1/midi-tower-2/inspire-k7.html Mõõtmed: 190 x 440 x 400 mm (L x K x S) Kasti mõõtmed: 242 x 481 x 437 mm (L x K x S) Materjal: Teras, karastatud klaas, võrk, plastik Kaal: umbes 5,0 kg Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Võimalikke fänne kokku: 3x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 1x 120 mm (tagumine) ARGB Radiaatori kinnitus: 1x 280 mm (ees) Filter: katus, põhi Sõidupesad: 2x 3,5 / 2,5 "(sisemine) 3x 2,5 "(sisemine) PSU: 1x standardne ATX (valikuline) Laienduspesad: 7 I / O-paneel: 2x USB 2.0 (sisemine ühendus) 1x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 335 mm (AIO kasutamisel 310 mm) Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU pikkus: 180 mm
No. of drive bays: 4 MOLEX power connectors: 0 Floppy power connectors: 0 SATA power connectors: 0 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 0 8-pin 12V power connectors: 0 Weight: 5.55
Füüsilised andmed: EMAPLAADI TUGI: ATX; Micro-ATX; Mini-ITX GRAAFIKAKAARDI PIKKUS KUNI: 400 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 165 mm TOITEPLOKI ÜHILDUVUS: ATX PS2; 200 mm KÕRGUS: 427 LAIUS: 280 SÜGAVUS: 440 mm Ühenduvus: I/O PANEEL: 1x USB 2.0 (internal connection); 2x USB 3.0 (internal connection); HD Audio; Reset switch Kettasahtlid 2.5": 4x 2.5" pesa 3.5": 2 Ventilaatoritugi: TAHA PAIGALDATUD 1 x 120mm Umbra Void ARGB PWM ÜLESSE VÕIMALIK PAIGALDADA 3x 120 TAHA VÕIMALIK PAIGALDADA 1x 120
Kompaktes Mini-ITX-Gehäuse, viel Mesh für optimierten Airflow, Platz für 280er Radiatoren, 4-Slot-GPUs bis 336 mm, für ATX- oder SFX-Netzteile, bis zu sieben 2,5-Zoll-Laufwerke möglich
Elegant Midi-Tower by InWin, unique cooling concept, power supply chamber at the top with mesh, space behind for vertically mounted radiators, semi-tall tempered glass side window, one pre-installed 120-mm ARGB PWM fan, I/O panel with USB 3.2 Type C.
The CORSAIR 2000D AIRFLOW is a Mini-ITX small-form-factor case with phenomenal cooling thanks to steel mesh front, side, and rear panels that deliver plentiful ventilation to your system.
