Arx 500 Air We've always had a sneak peek at the housings and we've seen a lot - and the sight of Arx 500 Air still makes us look like a big banana. No wonder, because we packed all our knowledge into it. Spoiler alert - it turned out like a dream. This is one of the largest (slightly shorter than the Arx 700 series) cases we have created. It is 486×228×429 mm - this is easily enough for, among others, a high cooling system (up to 179 mm), 7 fans (including 5 Stratus 140 PWM fans, which we provide at the start) and most graphics cards available on the market (up to 350 mm). . Everything sits in a pleasant draft, because the finely perforated front and top panels let in fresh air and block dust. You can check it through a tempered glass window.
Lupus 27 Computer Midi Tower ATX PC Case is a new case from the iBOX brand. This time we get extremely interesting combinations of tempered glass on the side panel of the housing with a front made of a special mesh, under which there are RGB fans. This interesting combination gives the housing a unique look and makes your gaming stand look even better. The case is designed with gamers in mind. The power supply is mounted at the bottom in a special tunnel that separates it from the rest of the case. In addition, the housing is equipped with a set of filters limiting dust access to the interior. It has a USB 3.0 port and two USB 2.0 ports. Three 120mm RGB backlit fans are mounted on the front and one 120mm fan is mounted on the back of the case. The side window is made of tempered glass. This interesting combination of 3 materials (glass, metal and plastic) makes Lupus 27 an extremely interesting proposition.
The CORSAIR 3500X ARGB mid-tower chassis is designed for enthusiasts seeking a blend of performance and aesthetics. With its versatile cooling options, it supports multiple fan and radiator configurations to ensure your components stay cool under load. The elegant design features tempered-glass panels on the side and front, complemented by comprehensive dust filtration, to showcase your build while keeping it clean. The spacious interior accommodates large video cards and CPU coolers, making it compatible with a wide range of hardware. Enhanced connectivity options on the front panel, including USB-C 3.2 Gen 2 and USB 3.2 Gen 1 ports, provide easy access to your devices. Additionally, its support for various motherboard form factors from Mini-ITX to Extended ATX allows for flexible build configurations, making the CORSAIR 3500X ARGB a smart choice for gamers and professionals alike.
Horizon ARGB FLOW Midi White Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
Compact dual-chamber midi tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case lid for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 in the front panel
Compact Micro-ATX case with wood decor, made of steel and plastic, for Micro-ATX or Mini-ITX motherboards, four-slot GPU up to 415 mm, suitable for 360 mm radiator
Xtender VG (White) | PSU Not included | 2x P12 Pro A-RGB (pre-installed at rear), 3x P14 Pro Reverse A-RGB (pre-installed at side) | Dimensions 529 x 231 x 529 mm
Xtend your PotentialXtend your CoolingThe Xtender is a high-airflow panorama case for maximum air circulation. Five pre-installed fans ensure efficient cooling of high-performance components. The power supply unit (PSU) will be mounted approximately 20 mm above the bottom to ensure an optimal supply of fresh air. Compatibility for 120 or 140 mm Fans Modular, removable fan brackets for installing 140 mm fans at the top or on the side. Tempered Glass Side PanelLarge tempered glass windows provide a clear view of the hardwreMagnetic Mesh Filters Easily removable, reinforced filters protect against dust and allow quick cleaning. Five preinstalled FansXtend your Vision Functional I/O Panel No frills. Only the most important and frequently used ports are included. Tempered Glass Side Panels Large tempered glass windows provide a clear view of the hardware.A-RGB PSU Cover Integrated glass panel with 24 A-RGB LEDs illuminates the lower section of the case. Xtend your Storage Flexible Mounting for Up to Six Drives Supports three 2.5" drives behind the motherboard tray. Removable drive cage holds two 3.5"/2.5" and one additional 2.5" drive. Xtend your Experience Includes Accessory Box Includes extra screws, cable ties and space for additional small parts. 3D Cable Pass-Throughs for Improved Aesthetics For clean cable routing behind the motherboard and a tidy interior.Clean Cable Management Smart cutouts and optimally placed cable straps for easy cable management. Xtend your Limits Supported Radiator/Fan Thickness When Using Dual Radiator Setup 240 mm Top Radiator 280 mm Top Radiator 360 mm Top Radiator 420 mm Top Radiator 240 mm Side Radiator Top:
The Montech X5 is a mid-tower case that combines elegant design with solid cooling performance. With a sleek front panel, tempered glass side window, and pre-installed fans, it's the ideal choice for budget-conscious PC setups. Modern mesh front panel with a clean, minimalist look Three 140mm and one 120mm fans pre-installed for instant cooling Tempered glass side window for an unobstructed view of the interior Compatible with E-ATX motherboards and GPUs up to 410 mm in length Spacious interior with tidy cable management Elegant design for any setup Enjoy high compatibility in a compact build with the Montech X5 Mid-Tower. It accommodates large GPUs, powerful cooling systems, and modern cable management—without appearing bulky. The X5 uses a simple front panel without mesh, delivering a clean overall appearance. It's especially suitable for users who value a clear, minimalist look. This case combines performance with style—the RGB lighting delivers an impressive appearance and enhances your entire setup. Whether for a gaming rig or workstation, customizable effects make your PC a real eye-catcher. Solid cooling performance with four fans Keep your components at optimal temperature with the Montech X5, the perfect choice for those who prioritize high-performance cooling. Its airflow-friendly design and optimized airflow architecture ensure ideal cooling, even during long gaming sessions or heavy system loads—a case that perfectly combines performance and cooling. Despite the closed front, four 120mm fans are already installed, providing good basic cooling right out of the box. This means you're ready to go without additional investment. Thanks to the removable dust filters, your case stays free from dust build-up. The filters are easy to clean, so your computer remains optimally cooled at all times. Easy assembly & flexible hardware support The interior offers space for standard ATX motherboards, long graphics cards, and multiple drives. Thanks to its thoughtful structure, installation is quick and straightforward, even for beginners.
With the Lian Li O11 Dynamic Mini V2 Flow, your gaming setup is sure to stand out: Despite its compact design, this mini case offers a spacious interior with enough room to make your vision a reality. Whether you opt for air cooling, an AiO water cooling system, or vertical GPU installation—this case can handle it all and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior allows the installation of powerful components Clean cable management: Cable holders and support for motherboards with back-connect design for tidy cable routing Includes GPU brackets: Graphics card can be installed vertically or horizontally Dust protection: Easy-to-clean dust filters at multiple locations Five pre-installed fans: Three 120 mm reverse-blade fans at the bottom and two on the side The Lian Li O11 Dynamic Mini V2 Flow: A mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 Flow with sample hardware Featuring tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 Flow lets you showcase your hardware. Its compact size allows it to sit comfortably on your desk and become the centerpiece of your gaming setup—all without annoying cable clutter inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable holders, the case enables clean cable routing. A built-in bracket for the heavy 24-pin ATX cable ensures it stays neatly in place, while cleverly positioned straps keep all other cables organized. The drive cages can also double as a hiding spot for cables. This makes cable management effortless—perfect for both beginners building their first gaming PC and pros tired of spending hours on cable routing. Flexible installation for motherboards and AiO water coolers A vertically adjustable motherboard standoff offers you more flexibility when installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The top position supports 240 mm and 360 mm AiO liquid coolers, while the bottom position also allows for a 280 mm radiator. Well cooled, even under full load Supports up to nine fans Space for two water cooling radiators Mesh panel on the top Dust filter on the bottom The fans and radiators provide sufficient cooling for your gaming hardware, even under maximum load. A mesh panel and dust filter help reduce dust build-up inside the case, prolonging the life of your components. Lian Li O11D Mini V2 Flow fans The Flow version of the O11D Mini V2 comes with five fans pre-installed. These 120 mm fans feature reverse blades, ensuring a clean look without sacrificing essential airflow. Ready for peak performance with enough space for large GPUs The interior of the tower is designed to accommodate even large graphics cards up to 400 mm in length—whether mounted horizontally or vertically. The included GPU brackets ensure a secure hold in both scenarios, giving you the freedom to choose your preferred GPU orientation. Supports motherboards in Mini-ITX, mATX, and ATX form factors—including models with rear cable management using a back-connect design. Combined with well-thought-out cable holders and Velcro straps, the result is a tidy, clean look with all cables elegantly routed to the back of the motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O panel The I/O panel module can be attached either on the top or at the bottom front. This lets you place the case wherever you want and still have easy access to the button and ports. If you position the panel on the top, the bottom cover is also removable—improving airflow.
The Lian Li DAN Cases A3-mATX Wood Edition in black combines modern design with an elegant walnut wood front panel. Thanks to excellent airflow through mesh panels, flexible configuration options, and space for high-end hardware, this case is the ideal choice for those seeking performance and style in a compact format. Perfect for demanding builds with a personal touch! Micro-ATX case by Lian Li in collaboration with DAN Cases Elegant front cover made from premium walnut wood and side panel of tempered glass Mesh panel on the top for excellent airflow Flexibly customizable: Let your imagination run wild Outstanding cooling thanks to space for 360 mm radiators Suitable for motherboards in Micro-ATX or Mini-ITX form factors Supports various power supplies from SFX to ATX A touch of luxury: The Lian Li DAN Cases A3-mATX Wood Edition in black If you're looking for a small form factor case for high-performance PC hardware, you should take a closer look at the Lian Li DAN Cases A3-mATX Wood Edition. This case combines a minimalist design with premium features: the elegant walnut wood front gives your setup an exclusive touch. With a capacity of about 26 liters, this Micro-ATX case is compact and space-saving. At the same time, the A3-mATX Wood Edition is perfect for high-end PC components, offering effective cooling despite its small size. With plenty of room for fans and radiators and generous ventilation openings, this mini tower easily meets the demands of powerful hardware. Flexibility meets performance: The fan and cooling options of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX Wood Edition offers space for up to 10 fans in the 120 mm format. These can be distributed as follows: three on the top, three on the side, three on the bottom, and one on the rear. Alternatively, two 140 mm fans can be mounted on both the top and side. With 25 mm thick fans on the case bottom, the GPU’s height is limited to 61 mm (3 slots). CPU air coolers can be up to 165 mm tall. Lian Li and Daniel Hansen also considered water cooling when developing the A3-mATX: A radiator can be installed in three locations inside the case: either a 360 mm (triple radiator) or 280 mm (dual radiator) on the top or the side. You must choose one of these two positions. The bottom of the case accommodates an additional 240 mm radiator. If you mount the fans below the radiator, you can even install a 360 mm radiator. Customizable configuration: The versatile possibilities of the Lian Li DAN Cases A3-mATX Wood Edition The Lian Li DAN Cases A3-mATX is suitable for a motherboard in Micro-ATX or Mini-ITX form factor. Unlike a Mini-ITX case, the PC case offers four expansion slots, allowing you to install a graphics card up to 4 slots tall and up to 415 mm long. You can install two 2.5-inch SSDs on a bracket. You can also install a 3.5-inch HDD or another 2.5-inch drive at the bottom of the case. You have the choice between an ATX, SFX-L, or SFX power supply, which you can mount flexibly at the front or side to create more space for your graphics card or the radiator—just as you prefer. In general, the smaller the power supply in the A3-mATX, the more room you have for the rest of your hardware. The I/O panel on the front of the Lian Li DAN Cases A3-mATX Wood Edition features two USB 3.0 Type A ports, one USB 3.1 Type C port, two 3.5 mm audio jacks (Mic-In/Audio-Out), and a power button. Note: The Lian Li DAN Cases A3-mATX Wood Edition offers numerous configuration options, but space inside this case is limited. The size and position of the power supply are crucial in selecting the right PC components. Therefore, we recommend careful planning using the manual in advance.
DeepCool CH170 PLUS WH. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Placering af strømforsyning: Top, Understøttede strømforsyning formfaktorer: ATX, PS2, SFX, SFX-L. Understøttede diametre for bagerste ventilatorer: 120 mm, Understøttede diametre for øverste ventilatorer: 120 mm, Understøttede størrelser på bagradiator: 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 195 mm, Dybde: 290 mm, Højde: 424,5 mm
ASUS Prime AP303 Mesh. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Bagerste ventilatorer installeret: 1x 120 mm, Understøttede diametre for bagerste ventilatorer: 120 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 215 mm, Dybde: 485 mm, Højde: 425 mm. Pakkebredde: 285 mm, Pakkedybde: 571 mm, Pakkehøjde: 465 mm
Das ProArt PA401 Wood Edition Beige besticht durch eine Frontblende aus Holz, die für einen unverwechselbaren, eleganten Stil sorgt und gleichzeitig Nachhaltigkeit fördert. Die charakteristische Frontblende aus Eschenholz des ProArt PA401 wurde weiter verfeinert und erhält durch ein neues beigefarbenes Finish eine moderne Optik. Ein aktualisiertes weißes Kabelset sorgt zudem für ein harmonisches Gesamtbild. Das Gehäuse verfügt außerdem über eine optimale integrierte Kühlung mit zwei 160-mm-Lüftern an der Vorderseite und einem 120-mm-Lüfter an der Rückseite sowie einem integrierten Lüfter-Hub, der einen optimalen Luftstrom ermöglicht. Die ProArt PA401 hat ein Frontgitter mit 33% Porosität, um den Luftstrom und die Belüftung zu maximieren. Die eingebauten 160-mm-Lüfter an der Vorderseite sorgen für einen effizienten Luftstrom von bis zu 138 cfm zu Grafikkarten und CPU-Kühlern und der äußere Ring, der die Lüfterblätter miteinander verbindet, reduziert die anfänglichen Vibrationen. Die Frontlüfter und der 120-mm-Hecklüfter mit PWM-Steuerung sorgen für einen optimalen Luftstrom, geringe Geräuschentwicklung, geringe Vibrationen und hohe Zuverlässigkeit. Die Anschlussoptionen sind über das vordere I/O-Panel leicht zugänglich, darunter eine PWM-Steuerung mit zwei Sektionen, ein USB Type-C-Anschluss mit 20 Gbit/s, zwei USB-A 3.0-Anschlüsse, HD-Audio und eine Sperre für die Power- und Reset-Taste.
Deepcool Wave V2 Black Micro ATX Case Experience the perfect blend of style and functionality with the Deepcool Wave V2 Black Micro ATX Case. Made from durable SPCC and ABS plastic with a sleek black finish, this case is designed to house Micro ATX and Mini-ITX motherboards. It features convenient I/O connectors including 1×USB3.0, 2×USB2.0, and audio and mic jacks. Weighing just 3 kg, this case is a lightweight and efficient choice for your next PC build.
Fractal Design Pop Silent - Torn - ATX Product Type: System cabinet Form Factor: Torn värv: must solid I/O Ühendusi: 2 x USB 3.0 Audio sisend Audio joon-out Supported Motherboards: ATX, Mini-ATX, Mini-ITX System Cabinet Features: kaabel management system, toetab 120 mm radiator in rear, PSU dust filters, toetab Kuni 280 mm radiator in front panel Power Device: No toiteplokk (ATX) mõõtmed (WxDxH): 21.5 cm x 47.35 cm x 45.4 cm kaal: 7.3 kg Manufacturer Warranty: 2-year garantii Designed For: Fractal Design Model D, Type D
Tootekood: AIR 903 MAX WGTIN: 4710562748970Korpused
Midi-Tower-Gehäuse, mit Seitenteil aus Tempered Glass, perforierter Deckel und besonders luftdurchlässige Front, vier integrierte 140-mm-PWM-ARGB-Lüfter
Horizon ARGB FLOW Midi Black Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
With the LANCOOL 217 from Lian Li, you bring style, functionality, and performance into perfect harmony. This mid-tower case combines a natural wood look with powerful cooling and offers everything you need for modern PC builds – including pre-installed fans, a flexible layout, and wide motherboard compatibility. Wood meets high-end: Black with walnut accents 5 pre-installed fans: High-performance cooling straight out of the box Back-Connect-ready: Compatible with motherboards featuring rear connectors Flexible power supply mounting: Standard and rotated modes for more space and better airflow Tool-less fan mount: Quick and easy installation thanks to retaining clips Lian Li Lancool 217 in black: A case that combines design and performance demands The LANCOOL 217 impresses with its successful combination of solid steel, tempered glass, and decorative real wood elements. The perforated mesh front not only ensures maximum airflow but also completes the organic design. With its spacious interior layout, the case supports motherboards up to SSI-EEB, GPUs up to 380 mm in length, and CPU coolers up to 180 mm in height. Excellent cooling for high-end hardware The five pre-installed fans provide powerful airflow straight from the factory. You can flexibly choose between a GPU- or CPU-focused cooling scenario by simply adjusting the fan positions. Magnetic dust filters and tool-free installation make assembly easier, keep your setup clean, and ensure you can clean your system quickly and easily. PC case with easy installation of your components Another highlight of the LANCOOL 217 is the removable radiator bracket: It makes installing AIO water cooling with up to 360 mm radiators easier and creates extra space when installing hardware. Two power buttons in different locations make it easier to turn your PC on, depending on whether it sits on or under your desk. Thanks to thoughtful solutions such as the vertically mountable PCIe slot, HDD/SSD combination options, and generous cable management, the LANCOOL 217 is the perfect choice for style-conscious PC enthusiasts with high expectations.
PC case Volcano Space XL ARGB Full Tower 5 fans, black Youre investing in a top-tier processor, a powerful graphics card, fast RAM, and a solid motherboard, so why would you hide them from yourself and other household members? The MODECOM Volcano Space XL Full Tower is a case designed so that your computer can finally look truly impressive. The front and side tempered-glass panels create a full visual showcaselike hardware displayed in a glass cabinet. Every detail, every ARGB effect (if you install illuminated fans), and every line of your configuration is visible and highlighted by this majestic chassis. MODECOM Volcano Space XL was designed for those who love personalization and perfect internal cable management, while also needing a spacious Full Tower case. Support for motherboards with reversed connectors allows you to build a modern interior without having to expose cables. Thanks to snap-on panels, you gain quick access to the inside. Installing components, upgrading hardware, and cleaning the interior become even easier. The spacious interior gives you full freedom: large E-ATX boards, robust water cooling (up to 420 mm), long graphics cards, and all the components you need for your gaming setup. With the MODECOM Volcano Space XL, your computer will know no limitsand it will look exactly the way it deserves. If you love technology, need plenty of room for expansion, and want your hardware always within sight, the MODECOM Volcano Space XL Full Tower is made for you. Especially in the Volcano Space XL NF version, which gives you complete freedom to configure cooling according to your preferences, as it comes without pre-installed fans. Because bigger can do more. 5 x 140 ARGB RIGHT FROM THE START The right operating temperature is the key to longevity and cool performance of any computer. The MODECOM Volcano Space XL was designed to ensure that your components always work in optimal conditions. As standard, you get five high-performance ARGB fans: three 140 mm fans on the side panel (in a reversed layout) and two 140 mm fans at the back of the case. This setup provides efficient airflow that effectively cools the processor and graphics card, even during intense and long gaming sessions. If you need even more cooling options, the MODECOM Volcano Space XL gives you full freedom to expand. On the top panel, you can install an additional three 120 mm fans, and in the bottom section up to three 120 or 140 mm fans. Additionally, near the PSU shroud, there is space for two more 120 or 140 mm fans if you are not using a top-mounted water-cooling system. More fans mean more stable temperatures and higher performance - and for advanced components, its a necessity.
Die North Momentum Edition ist eine neue, leistungsorientierte Version des ikonischen North-Gehäuses und ermöglicht verbesserte Kühlung direkt ab Werk. Das charakteristische offene Holzfront-Design und die fein gemusterte Mesh-Belüftung werden durch drei leistungsstarke Momentum-12-Lüfter mit LCP-Lamellen für einen leisen und effizienten Luftstrom ergänzt. Eine Front aus geschwärzter Eiche in Kombination mit dunklen Metallakzenten erzeugt eine stimmige, komplettschwarze Optik, die sich nahtlos in jedes Gaming-Setup einfügt. Im Innenraum bietet das geräumige und durchdachte Layout des Gehäuses Unterstützung für Grafikkarten bis zu 355 mm Länge oder 300 mm bei Verwendung eines 360-mmFrontradiators. Dadurch ist das North Momentum Edition die ideale Basis für leistungsstarke Gaming-Systeme.
MidiTower, M/B Type mini-ITX/m-ATX/ATX, USB 3.0 x2, RGB LED Switch, Reset Button, Audio In & Out (Supports AC97 / HD Audio), w/o PSU, Dimensions 480x210x435mm
Housing type: Midi Tower ATX Motherboard format acceptable: m-ATX, ATX, Extended ATX, mini ITX 5.25 "bays (external) - 3.5 "bays (internal) 3 pcs 2.5 "bays (internal) 4 pcs The number of expansion slots: 7 +3 pcs. USB socket on the front panel: 1 x USB 3.0, 2 x USB 2.0 Front panel microphone jack: 1 piece. Headphone jack on the front panel: 1 piece. Tool-free assembly: No Height: 487 mm Width: 230 mm Depth: 440 mm Number of fans installed: 5 pcs (2x RGB LED front 20 cm., 1x RGB LED rear 14 cm., 2x top 14 cm) Number of places for additional fans: 0 Maximum length of graphics cards: 370 mm The maximum height of the CPU heat sink: 180 mm Water cooling support: Yes (Front: 360mm; Rear: 120mm) Housing color: Black and silver More information: Dust filter x 3 Tempered glass on the side of the housing LED backlight. Removable side panel 90 degree inverted HD cage Bottom mounted power supply. Cable arrangement system Kit contents: Remote control to control the backlight, screws, cable ties.
