Panoramic View with Seamless Tempered GlassTwo frameless front and side tempered glass panels showcase your unique PC build. Premium Tempered Glass PanelThe P40 NAMU uses 4mm thick tempered glass to provide exceptional durability. Vibrant AF120 Lighting Effect Blade vibration is minimized by preventing shaking during fan operation, enhancing durability. Wind noise is reduced by suppressing the vortex effect on the blades. Airflow is maximized by minimizing air loss around the outer edge of the rotor. ARGB CONTROLLERThe RGB control hub and LED Control Button (Reset Button) on the side offer a variety of RGB effects. Connect to the motherboard 5V RGB pin header to create multiple RGB modes. Tool-Free Tempered GlassThe side panel can be easily and fully removed for convenient access to PC components. Easy panel management is ensured thanks to the groove fixing structure at the bottom of the tempered glass. Convenient MaintenanceEffortless side panel removal offers superior convenience during maintenance. Unrestricted Cooling PotentialDelivers the ultimate cooling solution with a side intake design, combined with optimized fan placement for superior internal airflow. Support for Reverse Layout MotherboardAll connectors are located on the underside of the motherboard for clean cable management and a minimalist build appearance.P40 DS is perfect for hidden-connector PCs and makes cable management much easier. Efficient Cable Management with Optimal Routing Design34mm cable management space helps keep wires organized.A convenient cable management layout and space make it easier than ever to organize messy cables for a clean look. Top & Bottom Magnetic Dust FilterMagnetic dust filters on the top and bottom effectively minimize dust buildup while enabling rapid heat dissipation during operation.
Das Inter-Tech ODS-716 für Raspberry Pi 4B ist komplett aus Aluminium gefertigt und bietet, zusammen mit den beiden integrierten Wärmeleitern für CPU und RAM ideale Wärmeleitfähigkeiten. Der Boden und Deckel des Gehäuses werden miteinander verschraubt, was zur Stabilität des gesamten Aufbaus beiträgt.
Das 4U-47045 ist ein vielseitiges 4U Servergehäuse mit vielen Erweiterungsmöglichkeiten und für den Einsatz in 19" Rack oder als Stand-Tower geeignet. Das Gehäuse ist standardmäßig für den Einbau von drei 5,25" Laufwerken, einem SLIM-DVD Laufwerk, vier 3,5" Laufwerken und zwei 2,5" Laufwerken konzipiert. Die Anzahl der Laufwerke lässt sich dabei durch den Einbau von optional erhältlichen Einbaukäfigen auf bis zu sechs 5,25" und zwei 2,5" Laufwerke oder acht 3,5" und zwei 2,5" Laufwerke erweitern. Für den nötigen Luftdurchsatz kann das Gehäuse hinten mit zwei 80mm Lüftern, im 3,5" Festplattenkäfig mit einem 80mm Lüfter und hinter der Fronttür mit einem 120mm Lüfter ausgestattet werden. Verstellbare Grafikkartenhalter sorgen für sicheren Halt der Grafikkarten oder anderer Erweiterungskarten. Die optional erhältlichen Teleskopschienen TS-680 ermöglichen den komfortablen Ein- und Ausbau in einem Serverschrank, sowie Arbeiten innerhalb des Gehäuses ohne dieses aus dem Schrank nehmen zu müssen. Des weiteren lässt sich das Gehäuse durch das ebenfalls optional erhältliche Erweiterungsset "SF-47045" auch als Stand-Gehäuse nutzen und mit Füßen und obenliegenden Transportgriffen versehen.
Dieses 3U-Rackmount-Servergehäuse SST-RM31-MINI kombiniert hohe Flexibilität mit einer durchdachten, professionellen Konstruktion. Es unterstützt Mainboards bis zum SSI-CEB-Formfaktor und bietet damit genügend Raum für leistungsstarke Serverplattformen. Durch die Nutzung von SFX-L-Netzteilen lässt sich ein effizientes, platzsparendes Stromversorgungskonzept umsetzen. Mit insgesamt acht vollwertigen PCI-Erweiterungssteckplätzen ist das Gehäuse ideal für vielfältige Anwendungen wie RAID-Controller, Netzwerkkarten oder GPU-Beschleuniger. Für optimale Kühlleistung sorgt die Unterstützung von 360-mm-Wasserkühlungsradiatoren, während gleichzeitig CPU-Luftkühler mit einer Höhe von bis zu 110 mm eingesetzt werden können. Eine moderne USB-Type-C-Schnittstelle an der Gehäusefront rundet das Design ab und ermöglicht schnellen Zugriff auf aktuelle Geräte und Speichermedien. Dieses Rackmount-Gehäuse eignet sich perfekt für professionelle Serverumgebungen, High-Performance-Workstations und anspruchsvolle Dauerlast-Szenarien, in denen Zuverlässigkeit und effiziente Kühlung entscheidend sind.
With a 270° panoramic view through seamless tempered glass panels on the front and sides, the Lucid 05 showcases your components impressively from nearly every angle. The Lucid 05 features a total of 11 fan mounts, ensuring effective airflow not only for the CPU and GPU but also for the system and storage drives. The upper compartment supports a 360 mm water cooling radiator for efficient heat dissipation in high-performance systems. With the recent introduction of the RTX-50 series, the Lucid 05 has been designed to accommodate graphics cards up to 410 mm in length.
The TR300 WS Mid-Tower Case is an ATX chassis with a front-mounted power supply for optimal space utilization, and supports AIO liquid coolers up to 360 mm for maximum cooling performance. It accommodates up to eight 120 mm fans and supports a radiator up to 360 mm on the top, offering flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four mounting points within the case, depending on the motherboard size. Maximize the visual effects of your TR300 WS Mid-Tower Case with an upgrade to our LCD screen kit. The 6-inch LCD display allows real-time monitoring and the upload of custom images or GIFs, adding extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while maintaining optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation.
The Silentware Air 2000 ARGB case isn't just another tower, but a carefully considered masterpiece of thermal engineering, designed for the most demanding gaming setups and professional workstations. In a world where modern graphics cards and processors generate ever-increasing heat, the Air 2000 becomes a true oasis of coolness. Its designers have departed from standard conventions, opting for an innovative approach to airflow that sets new standards in the midi-tower category. The focal point of this design is a mesh-patterned front panel, which, combined with an impressive array of seven pre-installed fans, ensures unprecedented airflow from the moment the case is removed from the box. The greatest innovation that sets the Air 2000 apart from the competition is its advanced system utilizing the so-called chimney effect. In addition to traditional front-to-back airflow, Silentware designers have integrated three specialized reverse-flow fans into the bottom of the case. This draws fresh, cool air from the lower chamber and forces it directly onto the graphics card, which is the most thermally stressed component in modern systems. This vertical airflow allows heat to naturally rise to the top where it is efficiently removed, drastically reducing operating temperatures even with the most powerful GPUs available on the market. Space and versatility are other features that make the Silentware Air 2000 an investment in the future of your system. The case is designed to easily accommodate E-ATX motherboards and massive graphics cards up to nearly 40 centimeters long. Whether you favor extreme air cooling or advanced water cooling, the Air 2000 gives you complete freedom of choice. It's one of the few designs in its class that allows for the installation of powerful 420 mm radiators in the front while also providing space for an additional 360 mm radiator at the top. These are ideal conditions for ambitious enthusiasts planning complex, custom liquid cooling loops. The Silentware Air 2000 ARGB is also a feast for the eyes and a prime example of user comfort. All seven fans are equipped with addressable RGB lighting, which can be fully customized and synchronized with the rest of your components using popular systems like AURA Sync or Mystic Light. The tempered glass side panel allows you to proudly showcase your rig's interior, while the intelligent daisy-chain fan system makes cable management easier than ever. By choosing this case, you receive a complete product that combines raw cooling performance with elegant design, giving your components the best possible conditions for breaking performance records. Housing type: Tower black EAN code 4262483960226 Manufacturer number AIR2000BLACK Made in China Midi-Tower Form Factor Motherboard format E-ATX Material: tempered glass, steel Window kit Yes Mesh front Yes Internal dimensions: Maximum plug-in card length 395 mm Supported radiators: Front: 240/360/420 mm, Top: 240/360 mm Internal 3.5-inch drive bays (2 pieces) Full-size slots, 7 pieces Front connectors: 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) Front Panel: 3 x 140mm ARGB RF140 with pre-installed hydrostatic bearing fans Back Panel: 1 x 140mm ARGB RF140 with pre-installed hydro-bearing fan Cable Management Notes, Bottom: 3 x 120mm ARGB RF120 reverse flow fans with pre-installed hydrostatic bearing Lighting: Yes, RGB RGB connectors addressable RGB connector Standard RGB AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling option: Yes Rear Motherboard Connection: Yes Note: The four 140mm and three 120mm fans are connected in series (daisy chain). Therefore, a total of two 4-pin PWM connectors and two 3-pin 5V RGB connectors are required for full motherboard control of all case fans. Capacity 59 liters Dimensions: Width: 23.8 cm x Height: 53.5 cm x Depth/Length: 46.4 cm
We designed the Silentware Core 100 ARGB to make PC building a breeze, even for beginners, eliminating concerns about space, airflow, or cabling. Our standard mesh case comes with four pre-installed Silentware RF120 120mm ARGB PWM fans, ensuring good airflow and effective component cooling. Our front fans are also daisy-chained, allowing for easy connection to the motherboard – no annoying adapters, additional controllers, or software required. Inside, you'll find ample space for your hardware – graphics cards up to 380mm in length and CPU tower coolers up to 165mm in height fit in the Core 100, meaning virtually no limitations on your build. The integrated adjustable graphics card support bracket ensures that even heavy graphics cards (up to 380mm in length) remain perfectly level. The CPU can optionally be cooled with air coolers (up to 165mm height) or an AiO liquid cooling system (radiator up to 360mm). Tower case type color black EAN code 4262483960233 Manufacturer No. CORE100BLACK Made in China Midi-Tower form factor Motherboard form factor ATX Material tempered glass, steel Window Kit Yes Mesh front Yes Internal dimensions: Maximum card length 380 mm Supported radiators (top): 240/280/360 mm 3.5-inch internal drive bays, 1 piece Full-size slots, 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s) Front panel: 3 x 120 mm ARGB PWM fans with hydro bearing pre-installed, alternatively 3 x 140 mm fans can be installed. Rear panel: 1 x 120 mm ARGB PWM fan with hydro bearing pre-installed Notes: Top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed; Power supply cover: 2 x 120 mm fans can be installed Lighting: Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible: Yes Rear motherboard connector: No Volume 50 l Dimensions: Width: 21.5 cm x Height: 49.5 cm x Depth/Length: 46.8 cm
We designed our Silentware Flow 110 A-RGB so that building a PC is child's play, even for beginners, and you don't have to worry too much about space, airflow or cabling. Our high-quality, modern mesh case comes with 4 pre-installed fans that ensure good air flow and thus provide good cooling of the components. Our front fans are also connected via a daisy chain, so they can be easily connected to the mainboard - without any annoying adapters, additional controllers or software. It is controlled via the mainboard via 4-pin PWM and 3-pin A-RGB 5V connectors. Tower case type Color white EAN 4262483960332 Manufacturer no. FLOW110WHITE Made in China Flow series Midi tower design Motherboard form factor ATX Material tempered glass, steel Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 380 mm Internal dimensions CPU cooler height maximum 185 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 260 mm Drive bays 3.5 inches internal Drive bays 2.5 inch 2.5 in 3.5 inch internal Slots full size 7 pieces Front connections 2x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Front 3 x 120 mm ARGB fans with hydro bearing pre-installed, alternatively 2 x 140 mm fans can be installed Back 1 x 120 mm ARGB fan with hydro bearing pre-installed, alternatively 1 x 140 mm fan can be installed Remarks Lighting can be controlled via 3pin A-RGB directly via the mainboard, the speed can be controlled via 4pin connection via PWM and/or voltage via the mainboard, cover: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed, Lighting Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Water cooling possible Supported radiators Front: 120/140/240/280/360 mm, cover: 120/140/240/280/360 mm, back: 120/140 mm Rear connection of the mainboard No Further information The high-quality real glass side window made of tempered glass allows you to see inside your case so that you can always keep an eye on your stylish PC components. To round off the design, we designed the space for the power supply as a closed chamber. This creates a visually minimalist and discreet system in which great PC systems can be created. The mesh front panel allows an unobstructed view of the RGB fans. Volume 51 l Dimensions Width: 23 cm x Height: 47.6 cm x Depth/Length: 47 cm
Enables vertical GPU installation, including PCIe 5.0 riser cable, high-quality steel bracket, compatible with current Lian Li cases With the Lian Li Vertical GPU Mounting Kit, you can elegantly and securely mount your graphics card vertically inside your case. The set consists of a sturdy metal bracket and a high-quality PCIe riser cable. This way, your graphics card is perfectly showcased while remaining optimally ventilated. Vertical GPU Installation: For a tidy, stylish system High-Quality Materials: Robust steel bracket ensures stability Includes PCIe Riser Cable: Secure and stable signal transmission Easy Installation: Precisely fitted for Lian Li O11 Dynamic, O11D XL, and O11 Air Mini Optimised Cooling: More distance from the glass panel for better airflow Vertical Graphics Card Mounting for a Clean Look With this bracket, you position your graphics card vertically – perfect for visually enhancing your system. The elegant design ensures the GPU becomes the focal point of your setup while allowing better air circulation around the card. Precisely Fitted for Lian Li Cases The mounting kit is tailor-made for the Lian Li cases O11 Dynamic, O11D XL, and O11 Air Mini. It can be easily attached to the existing mounting points without the need for any additional modifications. Thanks to the sturdy steel construction, the bracket securely holds heavy high-end graphics cards in place. This keeps your hardware protected, even during transport or frequent upgrades. Includes PCIe Riser Cable The supplied PCIe 5.0 riser cable reliably connects your vertically mounted graphics card to the motherboard. Made from high-quality materials, it ensures stable signal transmission and is designed for current high-bandwidth GPUs. Quick and Easy Installation Tool-free bracket insertion Matching cutouts and screw holes Mounted in just a few minutes Installation is straightforward: insert the bracket, connect the riser cable, install the graphics card – done. This allows you to quickly redesign and visually enhance your system with minimal effort. The Lian Li Vertical GPU Mounting Kit is the ideal solution to make your system cleaner, safer, and more visually appealing. Whether you own an existing O11 case or are starting a new project – with this kit, you present your graphics card in the best light.
With the SilverStone ALTA T1, SilverStone presents a unique full-tower case specifically developed for enthusiasts, professional workstations and demanding high-performance systems. The elegant case combines high-quality materials, well-thought-out design and maximum flexibility for modern hardware configurations. The richly designed interior supports motherboards up to SSI-EEB format and provides enough space for powerful graphics cards, extensive storage solutions and complex cooling concepts. Thanks to its versatile radiator mounting options, ALTA T1 is ideal for demanding custom water cooling systems and enables efficient heat dissipation even under heavy loads. A special feature is the retractable motherboard tray, which greatly facilitates the installation and maintenance of components. Additionally, the housing allows the use of two power supplies and thus provides optimal conditions for efficient workstation and server applications. The high-quality aluminum construction not only ensures impressive stability, but also gives the case an exclusive and timeless look. With its innovative design, enormous space and first-class build quality, SilverStone ALTA T1 is aimed at users who place the highest demands on performance, cooling and expandability. Whether it's a gaming system, a professional content creation workstation or an AI PC, this premium case provides the perfect foundation for uncompromising high-end setups. Large Tower Case Type Color Black EAN 4711643770125 Manufacturer No. SST-ALT1B Large Tower Design Motherboard Format E-ATX, SSI-EEB Material aluminum unibody frame, steel Internal dimensions Plug-in card length maximum 549 mm Internal dimensions Processor cooling height maximum 188 mm Internal dimensions of the power supply in ATX format Internal dimensions Power supply length maximum 320 mm Internal drive bays 3.5 inch Internal drive bays 2.5 inches Internal drive bays 2.5 inches 3.5 inches Full-size slots 8 pieces Front connectors 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 2x USB-C 3.2 Gen 1 (5 Gbit/s) The USB 3.2 Gen 1 marking corresponds to the current USB 3.1 marking Gen 1 / USB 3.0. Front pre-installed 1 x 120 mm black fan Rear 2 x 120 mm black fans can be installed Notes Left side: pre-installed 3 x 140 mm black fans, alternatively 3 x 120 mm can be installed, Right side: 3 x 120 mm can be installed, alternatively 3 x 140 mm can be installed, Top: can install 3 x 120 mm, alternatively you can install 3 x 140 mm or 3 x 160 mm. Water cooling possible Yes Water cooling possible Supported radiators Left side: 120/140/240/280/360/420 mm, Right side: 120/140/240/280/360/420 mm, Top: 120/140/240/280/360/420 mm, Rear: 120 mm. Rear motherboard connection no. Function Support for two power supplies, support for motherboards up to SSI-EEB Capacity 99 l Dimensions Width: 25 cm x Height: 66.9 cm x Depth/Length: 59.2 cm
With SilverStone SST-FLP03W, SilverStone combines the timeless design of classic desktop computers with the performance and flexibility of modern hardware. The attractive retro-style front brings back memories of computers from the 80s and 90s, and the thoughtful interior was designed with today's gaming systems, workstations and multimedia in mind. The case supports Micro-ATX and Mini-ITX motherboards and offers plenty of space for powerful components. You can easily install graphics cards up to 412 mm long and CPU coolers up to 171 mm high. The case also has room for standard ATX power supplies, which means that a wide range of current equipment can be used. SST-FLP03W is ideally prepared for efficient cooling. Supports multiple fans and water cooling with radiators up to 360 mm in diameter, ensuring reliable heat dissipation even in powerful systems. Modern front connectors with USB Type-C, two USB 3.0 ports and audio connectors ensure convenient connection of current peripherals. SST-FLP03W is ideally prepared for efficient cooling. Supports multiple fans and water cooling with radiators up to 360 mm in diameter, ensuring reliable heat dissipation even in powerful systems. Modern front connectors with USB Type-C, two USB 3.0 ports and audio connectors ensure convenient connection of current peripheral devices. In addition to modern functions, the case also offers sufficient possibilities for installing 5.25, 3.5 and 2.5-inch drives. This makes the SilverStone SST-FLP03W suitable for both lovers of the classic PC look and for users looking for an extraordinary case with contemporary functionality. Tower case type Color white EAN 4711643770439 Manufacturer no. SST-FLP03W Retro series Midi Tower design Shape motherboard µATX Material steel, plastic Internal dimensions Plug-in card length maximum 413 mm Internal dimensions Processor cooling height maximum 169 mm Internal dimensions of the power supply in ATX format Internal dimensions Power supply length maximum 200 mm External 5.25-inch drive bays Internal drive bays 3.5 inch Internal drive bays 2.5 inch Internal drive bays 2.5 inch 3.5 inch Full-size slots 5 pcs Front connectors 2x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) USB marking 3.2 Gen 1 corresponds to the existing designation USB 3.1 Gen 1 / USB 3.0. Front Pre-installed 1 x 180 mm black fan, alternatively 1 x 120/140 mm fan can be installed Rear installed 1 x 120 mm black fan Notes above: 3 120 mm fans can be installed, alternatively 2 can be installed 120 mm fans, power supply cover: 2 120 mm fans can be installed Water cooling possible Yes Water cooling possible Supported radiators Front: 120/140/240/280 mm, Rear: 120 mm, Top: 120/140/240/280/360 mm Rear motherboard connection no. Function Unique Turbo button for instant cooling mode under full load Further information Secure key lock prevents accidental activation of power and reset buttons Volume 49 l Dimensions Width: 22 cm x Height: 45.6 cm x Depth/Length: 48.4 cm
Supermicro Chassis Features:- System Level Optimized Solutions- Full Range of Rackmount, Workstation & Tower Chassis - mini-1U, 1U, 2U, 3U & 4U- Up to Platinum Level (95%+) High-Efficiency Power Supplies- High Availability, Adaptability, Scalability and Reliability- Outstanding Price/Performance Ratio- Highest Quality Components, Fans & Power Supplies- 100% Cooling Redundancy for System Reliability- Hot-Swappable Redundant Power Supplies, Fans and Drive Trays- Maximum Storage CapacityThese design advantages have helped Supermicro rapidly establish its reputation as a leader in chassis design. To see the future of chassis designs now, check out our latest chassis solutions. Optimized for the latest x86 processors, these state-of-the-art chassis are equipped with hot-plug heavy-duty fans, fan speed controls and revolutionary air-shroud designs for 100% airflow redundancy.Toetatud protsessorite arv1Toetatud mälutüübidDDR4-SDRAMToetatud kõvaketaste arv7Kujutegur1UToiteallikas200 WKasutamistemperatuur (T-T)0 - 40 °CHoiustamistemperatuur (T-T)-40 - 70 °CSuhteline õhuniiskus kasutamisel (H-H)8 - 90 protsentiSuhteline õhuniiskus (H-H) hoiustamisel5 - 95 protsentiLaius437 mmSügavus249 mmKõrgus43 mmKaal4,5 kg
Dimension: 210 mm x 465 mm x 470 mm Form Factor: Midtower Materials: Powder coated steel chassis Tempered glass side panel Motherboard Support: ATX, Micro ATX, Mini ITX, E-ATX *(up to 272mm wide, cannot use rubber grommets) Front I/O: 2x USB 3.0, Mic, Headphone, Reset, LED control (Digital Versions), 3-speed Fan controller (Non Digital Version)
Tootjainfo: http://kolink.eu/Home/case-1/midi-tower-2/inspire-k7.html Mõõtmed: 190 x 440 x 400 mm (L x K x S) Kasti mõõtmed: 242 x 481 x 437 mm (L x K x S) Materjal: Teras, karastatud klaas, võrk, plastik Kaal: umbes 5,0 kg Värv: must Kujutegur: ATX, Micro-ATX, Mini-ITX Võimalikke fänne kokku: 3x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 1x 120 mm (tagumine) ARGB Radiaatori kinnitus: 1x 280 mm (ees) Filter: katus, põhi Sõidupesad: 2x 3,5 / 2,5 "(sisemine) 3x 2,5 "(sisemine) PSU: 1x standardne ATX (valikuline) Laienduspesad: 7 I / O-paneel: 2x USB 2.0 (sisemine ühendus) 1x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 335 mm (AIO kasutamisel 310 mm) Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU pikkus: 180 mm
Unique Design & Powerful Heat Dissipation The AX90 features a unique mesh front panel design and excellent cooling performance. The full-view tempered glass side panel design allows you to show off your gaming configurations without any obstacles. 11 x 120mm fans can be installed simultaneously.
