With the TRYX FLOVA F50, you can build your perfect gaming PC. This mid-tower combines a calm, modern design with well-thought-out airflow. Whether it's a gaming PC, creator workstation, or powerful all-rounder, the FLOVA F50 gives you the right foundation. Quiet operation: Optimized cooling system ensures low noise levels Outstanding airflow: Special cross-flow fan concept for effective cooling Plenty of space for hardware: Graphics cards up to 420 mm in length Radiator support: Space for AiO liquid cooling radiators up to 360 mm Well-equipped I/O panel: USB-C 3.2 on the side TRYX FLOVA F50: Mid-tower with stylish design TRYX FLOVA F50 White front view The FLOVA F50 looks tidy and understated. The front and side panels feature a fabric finish. This gives it a homely, minimalist look while also providing enough fresh air inside. That means the case fits not only in your gaming room, but also in your office or living room. Powerful airflow with clever air routing TRYX FLOVA F50 interior Inside, the TRYX Cross-Flow System (TCF) ensures a strong supply of fresh air. The fans direct the airflow through the case at a 90-degree angle. This delivers fresh air directly to your graphics card and CPU. At the same time, your gaming system stays pleasantly quiet - at around 20 dB(A) at 1,100 rpm. So you get strong cooling without your PC being constantly audible during every task. Plenty of room for modern high-end hardware You can also install large components in the FLOVA F50. Graphics cards up to 420 mm long fit without issue. Air coolers can be up to 170 mm tall. For liquid cooling, the FLOVA F50 supports radiators up to 360 mm. Ready for current motherboard generations Supports ATX motherboards Compatible with back-connect designs (BTF / Project Zero) Clean cable management Tool-free installation in many areas Especially with motherboards featuring rear-side connectors, you benefit from an especially tidy interior. Cables disappear from view and your build looks much cleaner. I/O panel with USB-C On the side, you'll find an I/O panel with USB-C 3.2. This lets you connect fast external devices without having to reach around to the back of your case. It is easy to access and matches the case's clean overall concept. Ideal for gaming, creative work, and quiet setups TRYX FLOVA F50 White in a setup Whether you're planning a quiet creator PC or a powerful gaming machine, the TRYX FLOVA F50 gives you a case that reliably dissipates heat from your components without becoming excessively loud. It is the perfect choice for you if you value quiet operation, strong airflow, and a subtle, premium design. It does not demand attention - but impresses in the details.
"Zalman T6 ATX Mid Tower PC korpus koos 120 mm ventilaatori ja ODD-ga on ideaalne valik mängijatele ja tehnikahuvilistele, kes otsivad usaldusväärset ja stiilset korpust oma PC komponentide jaoks. See Mid Toweri korpus on elegantse ja minimalistliku disainiga, mille must väliskuju sobib hõlpsasti mis tahes konfiguratsiooni, pakkudes samas piisavalt ruumi riistvarakomponentidele. See toetab ATX, Micro-ATX ja Mini-ITX emaplaate, mistõttu ühildub see paljude erinevate konfiguratsioonidega. Korpusesse on eelnevalt paigaldatud 120 mm tagumine ventilaator, mis hõlbustab tõhusat õhuvoolu ja jahutusjõudlust kohe karbist väljudes, hoides teie süsteemi koormuse all sujuvalt töös. Nende jaoks, kes vajavad täiendavat jahutust, on korpusel mitu ventilaatori kinnituspunkti, mis tagavad parema temperatuuri kontrolli. Lisatud optilise kettaseadme (ODD) pesa muudab selle mitmekülgseks kasutajatele, kes vajavad endiselt kettamälu funktsionaalsust, ning lisab kaasaegsetele arvutitele nostalgia hõngu. Sees pakub Zalman T6 nutikat paigutust koos spetsiaalse kaablijuhtimise kohaga, mis mitte ainult ei paranda esteetikat, vaid optimeerib ka õhuvoolu kogu korpuses. See toetab kuni 280 mm pikkuseid videokaarte, kuni 165 mm kõrguseid protsessorijahuteid ja kuni 180 mm pikkuseid toiteallikaid, võimaldades võimsaid konfiguratsioone. Esipaneel pakub olulisi ühendusvõimalusi, sealhulgas USB 3.0 ja USB 2.0 pordid, samuti audiopistikuid, mis võimaldavad mugavat juurdepääsu välisseadmetele ja multimeediaseadmetele. Seadmepesa tööriistadeta disain lihtsustab paigaldus- ja uuendamisprotsesse, muutes selle kasutuse lihtsaks igasuguse kogemustasemega disainerite jaoks. Kokkuvõttes ühendab Zalman T6 ATX Mid Tower funktsionaalse disaini ja praktilised omadused, mis teeb sellest täiusliku valiku tasakaalustatud ja suure jõudlusega lauaarvuti jaoks.
Full mesh construction on the front ensures optimal ventilation The sense of unity between the front mesh and the tempered glass on the side panel creates a unique Zalman design. Exceptional airflow Designed for optimal air intake with a full mesh front panel and pre-installed addressable RGB fans allows for optimal and maximum airflow. High performance addressable RGB fan The mesh front panel and RGB fans provide optimal airflow and stunning RGB lighting effects (supports up to 8 fans). ARGB controller Press the LED I/O button to change the LED pattern and color (26 patterns) Press and hold the LED button for 3 seconds to sync the motherboard after the white light flashes once Press and hold the LED button for 6 seconds to turn off the LED after the white light flashes twice Press the LED button again to disconnect the motherboard sync and change the controller mode Magnetic dust filter Protects components and ensures unobstructed airflow by filtering dust. Bottom dust filter Protects the power supply from dust accumulation. Easy-to-use hinged glass side panel A hinged glass panel provides easy access to the interior.
Compact dual-chamber midi-tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case cover for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 on the front panel
Kaardus karastatud klaaspaneelid • Eelpaigaldatud PWM jahutusventilaatorid • Õhuvoolule optimeeritud korpuse konstruktsioon • Toetab suuri graafikakaarte ja jahuteid • Ruumikas sisemus ja kaablite haldus
The 3U rackmount server case SST-RM31 is designed for demanding computing environments, combining high compatibility, flexible power supply options, and exceptionally strong cooling performance. It supports motherboards up to the SSI-EEB form factor, making it suitable for both standard ATX and E-ATX platforms as well as professional server boards. For power supply, the case offers a choice between two SFX-L power supplies or redundant 2U-CRPS units, making it ideal for mission-critical systems where high availability is crucial. Inside, there is ample space for up to eight full-height PCI expansion cards, allowing for extensive GPU, network, or storage configurations without compromise. For efficient cooling, the case supports 360 mm water cooling radiators, which can be operated with up to six 120 mm fans in a push-pull configuration. Alternatively, CPU air coolers up to 110 mm in height can be installed, allowing for classic cooling solutions without limitations. The case is rounded out by modern connectivity, including an integrated USB Type-C port on the front, providing quick access to current devices and storage media. Overall, this server case offers an ideal foundation for high-performance workstations, virtualization servers, storage-intensive applications, or compact compute clusters that require both expandability and maximum cooling performance.
With SilverStone SST-FLP03W, SilverStone combines the timeless design of classic desktop computers with the performance and flexibility of modern hardware. The attractive retro-style front brings back memories of computers from the 80s and 90s, and the thoughtful interior was designed with today's gaming systems, workstations and multimedia in mind. The case supports Micro-ATX and Mini-ITX motherboards and offers plenty of space for powerful components. You can easily install graphics cards up to 412 mm long and CPU coolers up to 171 mm high. The case also has room for standard ATX power supplies, which means that a wide range of current equipment can be used. SST-FLP03W is ideally prepared for efficient cooling. Supports multiple fans and water cooling with radiators up to 360 mm in diameter, ensuring reliable heat dissipation even in powerful systems. Modern front connectors with USB Type-C, two USB 3.0 ports and audio connectors ensure convenient connection of current peripherals. SST-FLP03W is ideally prepared for efficient cooling. Supports multiple fans and water cooling with radiators up to 360 mm in diameter, ensuring reliable heat dissipation even in powerful systems. Modern front connectors with USB Type-C, two USB 3.0 ports and audio connectors ensure convenient connection of current peripheral devices. In addition to modern functions, the case also offers sufficient possibilities for installing 5.25, 3.5 and 2.5-inch drives. This makes the SilverStone SST-FLP03W suitable for both lovers of the classic PC look and for users looking for an extraordinary case with contemporary functionality. Tower case type Color white EAN 4711643770439 Manufacturer no. SST-FLP03W Retro series Midi Tower design Shape motherboard µATX Material steel, plastic Internal dimensions Plug-in card length maximum 413 mm Internal dimensions Processor cooling height maximum 169 mm Internal dimensions of the power supply in ATX format Internal dimensions Power supply length maximum 200 mm External 5.25-inch drive bays Internal drive bays 3.5 inch Internal drive bays 2.5 inch Internal drive bays 2.5 inch 3.5 inch Full-size slots 5 pcs Front connectors 2x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) USB marking 3.2 Gen 1 corresponds to the existing designation USB 3.1 Gen 1 / USB 3.0. Front Pre-installed 1 x 180 mm black fan, alternatively 1 x 120/140 mm fan can be installed Rear installed 1 x 120 mm black fan Notes above: 3 120 mm fans can be installed, alternatively 2 can be installed 120 mm fans, power supply cover: 2 120 mm fans can be installed Water cooling possible Yes Water cooling possible Supported radiators Front: 120/140/240/280 mm, Rear: 120 mm, Top: 120/140/240/280/360 mm Rear motherboard connection no. Function Unique Turbo button for instant cooling mode under full load Further information Secure key lock prevents accidental activation of power and reset buttons Volume 49 l Dimensions Width: 22 cm x Height: 45.6 cm x Depth/Length: 48.4 cm
Spacious Micro-ATX case in white, for motherboards up to Micro-ATX, side panel made of Tempered Glass, up to 11x 120-mm fans possible, 2x radiators up to 360 mm possible, graphics cards up to 400 mm in length, dual-chamber design.
The Thermaltake TR100 is an 18.4-liter SFF (Small Form Factor) case packed with many details. The right chamber houses the Mini-ITX motherboard and the SFX power supply, while the graphics card is located in the left chamber and connected to the motherboard via the included PCI-e 4.0 riser cable. Above these essential components is the cooling system: the TR100 can accommodate a 280 mm AIO to dissipate heat from the CPU. All panels are well-ventilated and removable to provide optimal cooling performance in a compact form factor and to simplify the user experience when building a PC system with the TR100. The TR100 has two separately available accessories: the 3.9" LCD screen kit, which can be installed at the front of the TR100, and the TT Traveling Suite Case, which keeps your system protected when gaming on the go wherever you are.
The TR300 WS Mid-Tower Case is an ATX chassis with a front-mounted power supply for optimal space utilization, and supports AIO liquid coolers up to 360 mm for maximum cooling performance. It accommodates up to eight 120 mm fans and supports a radiator up to 360 mm on the top, offering flexible cooling solutions. The case supports Mini-ITX, Micro-ATX, and ATX motherboards; the power supply can be installed at four mounting points within the case, depending on the motherboard size. Maximize the visual effects of your TR300 WS Mid-Tower Case with an upgrade to our LCD screen kit. The 6-inch LCD display allows real-time monitoring and the upload of custom images or GIFs, adding extra flair with the latest TT RGB Plus software. Removable dust filters help keep your system clean while maintaining optimal airflow. For maximum storage compatibility, the case supports up to two 3.5-inch HDDs and three 2.5-inch SSDs for flexible installation.
Our Silentware Air 2000 ARGB White is the ideal choice for high-end gaming PCs. Thanks to four large 140 mm Silentware RF140 ARGB PWM fans and three 120 mm Silentware RF140 ARGB PWM fans with reverse flow pre-installed, and the front panel optimized for high airflow, perfect cooling for even the most powerful hardware is guaranteed at all times. The airflow from the three (recessed) 140 mm reverse-flow fans is directed straight at the graphics card, supplying it with cool fresh air from the lower chamber. In addition to the traditional front-to-back airflow of classic tower cases, the Air 2000 allows for enhanced use of the chimney effect from bottom to top. This is particularly beneficial for high-power graphics cards. The Air 2000 White is therefore the Silentware case with the potentially most powerful cooling for all components. With space for graphics cards up to 395 mm long and CPU coolers up to 175 mm high, this case is perfect for high-end hardware. All-in-one (AIO) liquid coolers are supported with radiators up to 420 mm in length at the front. Buyers therefore have the freedom to choose between high-end air coolers and AIO water cooling systems. Particularly ambitious enthusiasts also have the option of creating complex custom loop water cooling systems with an additional 360 mm radiator at the top of the case. Tower case type Color white EAN code 4262483960219 Manufacturer No. AIR2000WHITE Made in China Midi-Tower form factor Motherboard form factor E-ATX Material tempered glass, steel Window Kit Yes Mesh front Yes Internal dimensions: Maximum plug-in card length 395 mm Supported radiators: Front: 240/360/420 mm, Top: 240/360 mm 3.5-inch internal drive bays (2 pieces) Full-size slots, 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) Front panel: 3 x 140 mm ARGB RF140 with pre-installed hydro-bearing fans Rear panel: 1 x 140 mm ARGB RF140 with pre-installed hydro-bearing fan Cable management notes, underside: 3 x 120mm ARGB RF120 reverse-flow fans with hydro bearing pre-installed Lighting: Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible: Yes Rear connection of the motherboard: Yes Note: Four 140 mm and three 120 mm fans are connected in series (daisy-chain). Therefore, a total of two 4-pin PWM and two 3-pin 5V RGB connectors are required on the motherboard to fully control all case fans. Volume 59 l Dimensions: Width: 23.8 cm x Height: 53.5 cm x Depth/Length: 46.4 cm
Shadow X2 Case Mesh Mesh front panel. Tempered glass hinged side door. Effective component protection and excellent component cooling. Set of dust filters. Wide compatibility with AIO water cooling systems. 4 x 120 mm fans included. Modern design. ATX MID-Tower Case Shadow X2 has dimensions of 407 x 211 x 455 mm, a Mesh front, and tempered glass hinged side doors. Thanks to this type of design, it looks very modern and provides great convenience. The dimensions of the hardware allow for the installation of an integrated liquid cooling system of 120, 240, or 360 mm on the front. There is also an optional 120 or 240 mm cooling option on the top of the case. What's more, the case accommodates standard CPU air cooling with a height of no more than 160 mm. Thanks to these dimensions, vertical mounting of the GPU graphics card is possible. 4 fans included with the PWM option The Shadow X2 Savio Case comes with 4 120mm fans with PWM control. They are characterized by performance, durability, and quiet operation. You can easily control them using motherboard-dedicated tools in the operating system or from BIOS/UEFI. In practice, this means that their speed can be adjusted over a wide range, typically from 10 -100%, while keeping noise levels low. I/O ports located on the top of the chassis The Shadow X2 has an I/O panel that features standard Power ON, Reset buttons, one USB 3.0 port, two USB 2.0 ports, HD Audio input, and output, as well as an additional RESET/LED button dedicated to controlling lighting effects. Multitasking interior The Case is characterized by high ergonomics, trouble-free installation and versatility. Its output parameters are a compromise between high performance and modern character. Importantly, you can expand the hardware at any time by adding, for example, more fans, water cooling, or other modules. The great advantage of Shadow X2 from Savio is that it accepts such parameters as you set for it. Specifications: Case Type: ATX Mid-Tower. Motherboard Compatibility: ATX, mATX, ITX, E-ATX. Supported disk formats: 2(1) x 3.5" HDD; 2(3) x 2.5" SSD. I/O ports: 1 x USB 3.0; 2 x USB 2.0; HD audio. Side panel: tempered glass. Maximum VGA length: 340 mm (vertical). Maximum CPU cooling height: 160 mm. Supported power supply types: all types of standard/semi-modular and modular power supplies. PCI expansion slots: 7 Dust filter: 1 x top, 1 x bottom (PSU), 1 x front. Fans included: 4 x 120 mm PWM, 4 pin, 800 - 1800 RPM (3 x front, 1 x rear). Supported fans:- front: 3 x 120/140 mm or 2 x 200 mm- rear: 1 x 120 mm- top: 2 x 120 (140) mm- bottom: 2 x 120 mm Water cooling support:- front: 1 x 120/240/360 mm- rear: 1 x 120 mm- top: 1 x 120/240 mm Product dimensions: (L x W x H) 407 x 211 x 455 mm. Housing material: SPCC 0.6 mml Front panel material/material: Metal mesh with small holes. Net/gross weight: 5.1/6.2 kg.
The Akyga AK36BK housing is a product in the Micro ATX standard, which advantage is minimalism that allows you to complete a computer that occupies a small space both in the office or at home. Light and small in sized, the product has an aesthetic look. It supports motherboards in the following formats: Micro ATX, Flex ATX and Mini ATX. The housing allows mounting a graphics card up to 250 mm long and up to 3 additional fans supporting cooling. The product architecture is adapted to the installation of disks and drives in 3 internal bays. Two 3.5 "and one 2.5" or two 2.5 "and one 3.5". The front panel of the housing has two USB A ports, one in 2.0 standard and one in a much faster 3.0 version. Above them there are sockets for connecting a microphone and audio equipment.
Deepcool Wave V2 Black Micro ATX Case Experience the perfect blend of style and functionality with the Deepcool Wave V2 Black Micro ATX Case. Made from durable SPCC and ABS plastic with a sleek black finish, this case is designed to house Micro ATX and Mini-ITX motherboards. It features convenient I/O connectors including 1×USB3.0, 2×USB2.0, and audio and mic jacks. Weighing just 3 kg, this case is a lightweight and efficient choice for your next PC build.
Elegant Midi-Tower in Black, discreet design made of aluminum and steel, side panel made of Tempered Glass, for motherboards up to E-ATX (max. 305 x 285 mm), space for a maximum 360mm radiator on the top, graphics cards up to 330 mm, 2x 2.5-inch and 4x 2.5-inch/2x 3.5-inch drive bays.
