Unique Design & Powerful Heat Dissipation The AX90 features a unique mesh front panel design and excellent cooling performance. The full-view tempered glass side panel design allows you to show off your gaming configurations without any obstacles. 11 x 120mm fans can be installed simultaneously.
The Raspberry Pi 5 case is made of ABS construction with cut-outs for the dual HDMI, Audio/Video, USB, Ethernet ports, as well as the USB-C power connector and access to the microSD card. The status LED can be easily visible through the rubber reflector. An optional clip-on lid can be removed to provide access to your Raspberry Pi's GPIO pins or connect a HAT. The case is a refinement of the Raspberry Pi 4 case, with improved thermal features to support the higher peak power consumption of Raspberry Pi 5. It integrates a variable-speed fan which is controlled by a dedicated connector on the Raspberry Pi 5 PCB. The case is available in Pi's signature red-white combination.
The CORSAIR 2000D AIRFLOW Black mini ITX is a compact computer case designed for small form factor builds. It has excellent airflow and can accommodate a mini ITX motherboard. The case has a sleek black design and is made by the popular brand Corsair.
Full mesh construction on the front ensures optimal ventilation The sense of unity between the front mesh and the tempered glass on the side panel creates a unique Zalman design. Exceptional airflow Designed for optimal air intake with a full mesh front panel and pre-installed addressable RGB fans allows for optimal and maximum airflow. High performance addressable RGB fan The mesh front panel and RGB fans provide optimal airflow and stunning RGB lighting effects (supports up to 8 fans). ARGB controller Press the LED I/O button to change the LED pattern and color (26 patterns) Press and hold the LED button for 3 seconds to sync the motherboard after the white light flashes once Press and hold the LED button for 6 seconds to turn off the LED after the white light flashes twice Press the LED button again to disconnect the motherboard sync and change the controller mode Magnetic dust filter Protects components and ensures unobstructed airflow by filtering dust. Bottom dust filter Protects the power supply from dust accumulation. Easy-to-use hinged glass side panel A hinged glass panel provides easy access to the interior.
Riesiger Big-Tower aus Stahl und Aluminium, drei Installations-Modi, duales System möglich, 16x Lüfter möglich, vier Radiatoren bis zu 480 mm, RGB-Beleuchtung und USB Typ C
The ROG Hyperion GR701 brings an X factor in both form and function that builders around the world have been craving. With support for dual 420 mm radiators, towering video cards, a fully integrated 2-way aluminum graphics card holder, 60-watt device charging and dual front USB-C connectors for compatible ROG motherboards, it is truly a PC chassis in the coveted ROG style.
The CORSAIR iCUE LINK 3500X RGB mid-tower case is designed for enthusiasts seeking a high-performance, aesthetically pleasing PC build. With its versatile cooling options, it supports multiple fan and radiator configurations, ensuring that your components stay cool under heavy load. The case is designed to be compatible with a broad range of motherboards, from Mini-ITX to Extended ATX, making it a suitable choice for builders planning to upgrade their system. The elegant tempered-glass panels on the side and front not only allow you to showcase your RGB components but also elevate the overall look of your setup. Additionally, the case features comprehensive dust filtration and high-speed connection options, including USB-C 3.2 Gen 2, making it a suitable contender for gamers and professionals.
ATX case with 270° glass panel, up to ten fans possible, GPUs up to 420 mm / CPU up to 165 mm height, up to three drives possible, radiator up to 360 mm, 1x USB-C / 2x USB-A
Nanoxia DS-9ARGB-W. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Understøttede diametre for frontventilatorer: 120,140 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 3.5", SSD-formfaktor: 2.5". Bredde: 215 mm, Dybde: 460 mm, Højde: 455 mm
Elegant black midi-tower, discreet design made of aluminum and steel, tempered glass side panel, for E-ATX motherboards (max. 305 x 285 mm), space for a maximum 360mm radiator in the top, graphics cards up to 330 mm, 4x 2.5-inch or 2x 2.5/3.5-inch data carriers.
Well-equipped Midi-Tower, front and side panel made of Tempered Glass, left side panel and top with ventilation slots, 6x 140mm ARGB PWM fans pre-installed, GPU length of up to 420 mm, ARGB strip on the front, up to two power supplies possible
Midi-Tower bis Micro-ATX, bis zu zehn 120-mm-Lüfter möglich, mit Wasserkühlungsoptionen, GPUs bis 430 mm, CPU-Kühler bis 180 mm Höhe, für Mainboards mit Anschlüssen auf der Rückseite
The Jonsbo D41 Screen ATX case in black is a sleek and versatile option for building a computer. Its closed front design makes for a silent build and it features an integrated 8-inch display. The case is made with tempered glass and can accommodate up to 8 fans and 3 radiators. It can also fit GPUs up to 400mm in length and has a movable power supply for optimal space allocation.
XPG INVADER X. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Placering af strømforsyning: Bund. Understøttede diametre for sideventilatorer: 120 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 245 mm, Dybde: 475 mm, Højde: 448 mm
The Lian Li DAN Cases A3-mATX Wood Edition in white combines minimalist design with luxurious functionality. With its elegant beech wood front, excellent airflow through mesh panels, and flexible customization options, it is the perfect choice if you want a powerful, compact setup. White Micro-ATX case by Lian Li in collaboration with DAN Cases Elegant front cover made of noble beech wood Mesh panels on the sides and top for excellent airflow Flexibly customizable: Let your imagination run wild Excellent cooling thanks to space for 360 mm radiators Suitable for motherboards in Micro-ATX or Mini-ITX form factor Supports various power supplies from SFX to ATX
The Phanteks NV9 MK2 is perfect for enthusiasts who want to showcase their hardware spectacularly while ensuring strong cooling performance. With its generous use of Tempered Glass and subtle DRGB lighting, you can impressively highlight your components, while the thoughtful ventilation system ensures optimal airflow. Ideal for you if you value aesthetics, functionality, and compatibility with back-connect motherboards. Elegant showcase case with excellent cooling performance Side and front panels made of Tempered Glass for a panoramic view of your hardware Optimal cooling with space for up to 11x 140mm or 12x 120mm fans Radiators possible on the top, bottom, side, and back Space for graphics cards up to 490mm in length Supports large motherboards up to E-ATX Back Connect: compatible with ASUS BTF and MSI Project Zero Space for large CPU tower coolers up to 205mm in height Integrated D-RGB lighting with built-in controller Phanteks NV9 MK2 Big Tower: Panoramic view now with Back Connect With the Phanteks NV9 MK2, you don’t compromise on cooling and presentation for your hardware. The left side panel and seamlessly integrated front are made of Tempered Glass and provide a superb panoramic view of your components. The pre-installed but subtle DRGB lighting enhances the look of the case and further highlights your hardware. Strong cooling performance for your components In developing the NV series and particularly the NV9 MK2, PHANTEKS focused on cooling the components from the start. The case is therefore designed to be very open and aimed at uninterrupted airflow. The top and part of the right side cover are made of mesh, ensuring good air throughput. The bottom is sloped and provides ample space with a maximum distance of 65mm to guide fresh air into the case. Many mounting options for better cooling The PHANTEKS NV9 MK2 offers numerous options for fan installation to optimally cool your hardware. You can accommodate a total of eleven 140mm or twelve 120mm fans, ensuring effective cooling throughout. Three fans can be mounted at the bottom on a removable frame above the dust filter. The side of the case offers space for four 120mm or three 140mm fans on another removable frame. Three fans can be installed on the top, and the back even has space for two additional fans. There is also sufficient space for extensive water cooling. On the top and bottom as well as on the side, one 420mm radiator can fit simultaneously. You can alternatively install a 360mm radiator at the bottom or the top. Additionally, a heat exchanger up to 480mm in length can fit on the side. You can also install a 240mm or 280mm radiator at the back if you want to use a smaller AiO water cooling for your GPU. Ample space for your gaming hardware If you use a large motherboard to get the most out of your system, then the NV9 MK2 is also the right choice for you. For maximum compatibility, you can easily accommodate E-ATX motherboards. Additionally, graphics cards up to 490mm in length and 205mm in width can be installed. There is sufficient space for modern, wider GPUs and 12VHPWR cables in this big tower case. For additional stability, a GPU holder is also included. The PHANTEKS NV9 MK2 also supports CPU coolers up to 205mm in height. The case also provides space for up to three 3.5-inch and two 2.5-inch drives or six 2.5-inch drives, giving you ample storage options for any data. These can be installed on a hinged frame behind the motherboard tray and directly on the back of the motherboard tray. Robust construction and well-equipped I/O panel In addition to the Tempered Glass panels, the case impresses with its construction from robust steel. The frame is well hidden by screen prints on the panels. The seamless glass panels not only provide an elegant look but also an unobstructed view of the installed components. The I/O panel features a power button, HD audio and microphone jack, as well as a USB 3.1 Type-C port and two USB 3.0 Type-A ports for fast data transfer. Additionally, there are four buttons integrated into the case for controlling the D-RGB lighting - one button for each mode, colour, speed, and channel. Each channel has two connectors where the LED strips can be attached. The modular I/O panel at the bottom front can also be mounted at the back of the case. Intelligent cable management The PHANTEKS NV9 MK2 features a sophisticated cable management system that ensures a tidy and neat appearance. Particularly notable is the back, which also has a mesh cover and offers cable channels behind it, allowing you to hide cables from the motherboard panel as well. Through a cutout with a rubber grommet, you can even route cables through the bottom of the case. This way, your NV9 MK2 has a neat and appealing look from every angle. The case also supports motherboards with Back Connect. With back-connect design motherboards like MSI's Project Zero or ASUS's BTF motherboards, the connections for power supply, data cables, and other connections are located at the back of the motherboard. This not only provides cleaner cable management in your case but also better ventilation.Specification:ColourPrimary Colour: BlackDimensionsLength / Depth: 575 mmWidth: 280 mmHeight: 615 mmCaseCase Type: Full TowerMotherboard SupportCompatible Motherboard Formats: ATX, E-ATX, Micro-ATX, Mini-ITXMax. Motherboard Format: E-ATXInternal DimensionsMax. CPU Cooler Height: 205 mmMax. GPU Length: 490 mmMax. PSU Length / Depth: 210 mmPower SupplyPSU Format: ATXPower Supply Position: rear topFan Support120 mm fan: 12140 mm fan: 11Drive Bay2.5 inch internal drive bay: 63.5 inch internal drive bay: 3External PortsUSB 3.1 (extreme) Type C: 1USB 3.0 (extreme) Type A: 2Audio output & input: 1x output/input comb. (3.5 mm jack, 4-pin, TRRS)Case FeaturesI/O Position: FrontSide Panel: with windowFilters included: YesBook ConnectBook Connect: YesBook-Connect Compatibility: ASUS BTF, MSI Project ZeroExpansion SlotsExpansion slots / PCI slots: 8MaterialMaterial: Plastic, Steel, Tempered GlassLightingLighting: YesRGB Type: ARGB / DRGBLighting Colour: RGBAdditional ContentsIncluded Fan: None
Black case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Room for graphics cards up to 460 mm and CPUs up to 170 mm in height Installation of up to nine SSDs enables extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that convinces not only with its wide range of hardware possibilities, but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to receive true admiration. With the LUCA L70, you’re perfectly equipped to assemble your gaming PC exactly as you wish. This midi-tower offers more than enough space to keep your hardware cool, and is also extremely easy to take apart and put back together. Building your high-end setup has never been so easy! Comprehensive cooling options for your new build When building your own PC, cooling is one of the most important factors to consider. The LUCA L70 allows the installation of up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that with this combination, the power supply unit must be mounted on the top of the case. If you prefer mounting the PSU on the bottom, three fans can be installed on the top and only one on the bottom. Water cooling enthusiasts will also not be disappointed: radiators up to 420 mm can be installed in several locations. If the power supply is on the top, only a 240 mm radiator is possible there and a maximum 360 mm radiator on the bottom. If you mount the PSU at the bottom, there is room for a 420 mm radiator on the top as well as on the side. To prevent unnecessary dust buildup inside the case, there are dust filters on the top and bottom. This ensures a much longer lifespan for your hardware and saves you time and annoying cleaning. Thanks to the many options for installing fans and radiators, effective cooling is ensured so your high-end hardware always performs at its peak. In addition, the tower stands 4 mm above the ground on X-shaped legs, which further improves airflow. Case for powerful hardware So you can play even the most demanding games smoothly at high settings, the LUCA L70 accommodates a high-performance graphics card up to 460 mm in length. An included GPU bracket ensures it’s not subject to gravity. Vertical GPU installation is also possible—appropriate accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX with a width of up to 280 mm. To avoid cable clutter, it also supports motherboards with back-facing connectors when the PSU is on top, but only in ATX or micro-ATX format. The CPU height must not exceed 170 mm, and the power supply should be no longer than 190 mm. For plenty of storage for your programs and games, you can attach up to nine 2.5-inch drives to the side of the LUCA L70. Tool-free assembly and disassembly To make installing and swapping hardware as easy as possible, the LUCA L70 is fully modular. The front, side, and other parts can be taken apart and reassembled without any additional tools, plus the motherboard tray can be moved so you can install the motherboard, CPU, and CPU cooler independently.
