Portos ARGB Mini Black Logic Portos ARGB Mini is a chassis created to build a powerful and modern gaming PC. WHEN IT'S THE INSIDE THAT COUNTS... Are you building a computer for gaming? And you want it to not take up too much space on your desk? Then of course you need a well-thought-out, well-designed and good-looking MINI ATX-sized case. Preferably still one with three mounted ARGB fans, an airy front and top, dust filters, and the side panel was made into a tempered glass door. This is where Case Logic Concept Portos ARGB MINI comes to the rescue. A concrete competitor for gaming tasks, providing good airflow, component culture, their safety and low temperatures of installed components. OPEN YOURSELF TO NEW A side panel made of tempered glass in the form of a hinged door makes it easier not only to install components, but also to keep the computer clean. Just open the door and clean the center with compressed air. Isn't it simple and practical? It's the only one we want to give you, because they simply belong to you. TO HOT COMPONENTS SAY "NO" An airy front and top panel significantly facilitates air circulation. Two 120 mm fans on the front and one 120 mm fan on the back Cases effectively cool the heated components. All for your comfort and the safety of your computer. Always willing to play Logic PORTOS ARGB MINI is a case created to build an efficient and modern gaming PC. Optimal airflow, practical solutions and pre-installed ARGB fans make up its gaming character. READY FOR GAMING COMPONENTS The ability to mount graphics cards up to 340 mm and a maximum CPU cooling height of 155 mm allows the installation of most high-performance components available on the market. PROTECT YOUR COMPUTER FROM DUST DUST FILTERS A dust filter has been placed under the power supply unit. It minimizes the amount of dust sucked in by the PSU's fan, positively affecting its operating temperature and service life. An additional filter is located on top of Cases. This effectively traps unwanted dust and protects the installed components. It protects against dust that enters the computer by gravity throughout the day, even when the computer is turned off. All the effective protection is complemented by mesh mesh on the front panel. OPTIMAL AIR CIRCULATION The ventilated front panel provides airflow with two, efficiently operating 120 mm fans. The back of Cases , on the other hand, features one pre-installed 120 mm fan This allows you to effectively cool the installed components of the computer's interior, positively influencing the culture of their operation and service life. As an option, it is possible to mount two 140 millimeter fans on the front of Cases in place of the factory-installed ones and two 120 or 140 millimeter fans on the top on their own. Case It is also adapted for installation of water cooling. ARGB BEAUTY Case for gamers must look nice. That's why the pre-installed ARGB fans add beauty to the case and the gaming stand. The color of the backlight can be changed at will from the predefined settings using the button on the control panel Cases. Convenient access to the top panel Convenient access to the top panel, and there are two USB 2.0 and one USB 3.0 connectors, plus one minijack connector for headphones and microphone, a power button and a button to control the fan backlight. SIMPLE INSTALLATION Everything here is well thought out and intuitive. Building a computer in this case is a pleasure and is child's play. POWER SUPPLY A gaming computer must have a good and powerful power supply. That's why we made sure that it has a home here! The maximum length of the power supply with the disk cage installed is 200 mm. A dust filter has been placed under the power supply, which effectively protects the operation of the power supply from dust 4 PCIe expansion card slots Four slots for PCIe expansion cards. This is the optimal number for mounting, among other things, a graphics card and a network card. SPACE FOR GAMES IN ABUNDANCE The mounting of HDD or SSD drives is obviously thought out here as well. Inside Cases at tunnel level there is a basket for 3.5" or 2.5" drives. On the motherboard tray, on the other hand, it is possible to mount an additional 2.5" drive. A total of 2 SSDs and 1 HDD or 1 SSD and 2 HDDs can be installed.
Midi-tower case with tempered glass, very good airflow, offers D-RGB lighting, four integrated 140mm D-RGB fans, compatible with MSI Project Zero and ASUS BTF motherboards
The CORSAIR AIR 5400 LX-R RGB PC case is designed for enthusiasts seeking a high-performance case with a clear structure and well-thought-out cooling management. Its innovative three-chamber design deliberately separates hot components from each other, ensuring an organized build. Three separate chambers optimize airflow for the GPU, CPU, and power supply—ideal for powerful builds with high cooling requirements. The iCUE LINK system with pre-installed LX-R RGB fans offers directly controllable lighting and effective cooling right out of the box. Curved tempered glass doors elegantly open to the side, providing easy hardware access and stylish presentation. Compatible with E-ATX motherboards and large graphics cards—perfect for demanding configurations. RapidRoute 2.0 simplifies cable management for clean builds without compromise. Three-chamber design: structure meets cooling performance At the heart of the AIR 5400 LX-R is a thoughtfully designed layout with three thermally separated zones. GPU, CPU cooling, and the power supply all receive individual airflow, lowering temperatures and supporting component longevity. Stylish, systemized access The curved, side-opening tempered glass doors combine elegance with functionality. They offer tool-free access to hardware and clearly showcase your setup—without unsightly cable clutter. Ready for high-end configurations Thanks to iCUE LINK integration, the case comes equipped for intelligent fan control and RGB sync. Radiators up to 360 mm can be installed in all three main zones, while the thoughtful interior easily accommodates even large hardware.
The Lian Li Vector V100 combines stylish yet simple design with high compatibility and a special cutout for more individuality. With this desktop case, you get the perfect chassis for your next gaming PC. White midi-tower with tempered glass on the side and front Supports motherboards up to ATX form factor and with back-connect design Optimal cooling with up to nine fans and radiator support up to 360 mm Space for graphics cards up to 415 mm and CPU coolers up to 180 mm in height Four 120 mm fans with RGB lighting included Cutout with removable cover for collectibles The Lian Li Vector V100: midi-tower with a stylish design and plenty of space for hardware Express your personality with the Vector V100. Thanks to tempered glass panels on the side and front, you have an unobstructed view into your tower’s interior, while the LED strips are just the beginning of impressive RGB lighting. Make your build something special Directly behind the front of the V100 case is a cutout. Whether for figures or other collectibles—you can display your interests. If you don't need the cutout, simply cover it with the removable panel. Extensive cooling options Four 120 mm ARGB fans are already pre-installed—three reverse fans on the side and one with standard orientation at the rear. Thanks to their reversed fan blades, the sideways-mounted fans provide efficient airflow—and look just like regular fans. Additional mounting points for more fans are located on the top and bottom. If you prefer water cooling, you can also install a radiator up to 360 mm on the top panel. The dust filter at the bottom is easy to remove, so you can clean it whenever needed. Easy installation of your gaming hardware The Vector V100 offers plenty of space for your components—even high-end hardware. Thanks to support for motherboards with back-connect design and tidy cable management, your build will really stand out.
Internal 2x 2.5 "/ 3.5" (cross, drive rails), 2x 2.5 ", Front I / O 1x USB-A 3.0, 2x USB-A 2.0, 1x headphones, 1x microphone, PCI slots 7, Fan (front) 2x 120mm or 3x 120mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 120mm (optional), Fan (other) 2x 120mm (optional), Radiator sizes 120 / 240mm front, Motherboard up to ATX, Power supply ATX (max 180mm deep), Power supply position below, CPU cooler up to max. 156mm height, Graphic cards up to max. 330mm, Color black, inside black, Dimensions (WxHxD) 189x451x412mm, Volume 35.12l, Weight 4.00kg, Special features cable management, dust filter, W/O PSU
The ASUS TUF Gaming A2 storage enclosure offers a durable solution for your solid-state drives. Constructed with aluminum and silicone rubber, this enclosure withstands various environmental conditions while maintaining optimal performance. It supports M.2 NVMe cards and ensures efficient data transfer with USB 3.2 (Gen 2x2) technology, providing a data transfer rate of 20 Gbit/s. The enclosure features Q-Latch compatibility, enhancing usability and stability in various setups. With an internal design that supports M.2 2242/2260/2280 form factors, the TUF Gaming A2 is versatile for your storage needs.
Compact gaming case, made of high-quality steel, for SFX PSUs and Mini-ITX/Micro-ATX motherboards (Intel and AMD), GPU up to 363 mm and 2x 2.5-inch drives.
Micro-ATX case for DIY NAS, one pre-installed fan, GPUs up to 230 mm / CPU up to 70 mm height, 6x 3.5 / 2x 2.5 inch drives possible, 1x USB-C / 1x USB-A
With the D32 series, Jonsbo appeals to everyone who wants to build their system in a space-saving manner. The D32 STD PC case, compared to the D32 PRO, is aimed at the midrange and budget segments by focusing on key features such as back-connect support or minimal front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for back-connect motherboards Mesh side panel provides a subtle appearance Plenty of room for cooling solutions allows the installation of high-performance hardware Dust filter protects your hardware from annoying dust particles The Jonsbo D32 STD Mesh: A space-saving and discreet case for a variety of hardware Whether it's a midrange HTPC or a high-end PC—you'll find a comfortable fit for all kinds of builds in the Jonsbo D32 STD Mesh. Despite its compact size, the case accommodates graphics cards up to 365 mm in length and CPU coolers up to 164 mm in height. This means that, even with the compact design, your hardware will be adequately cooled. Together with up to six 120 mm fans, or a combination of one 120 mm fan and four 140 mm fans, the case ensures exceptional airflow inside. No cable clutter with back-connect With back-connect motherboards like the BTF series from ASUS, the PROJECT ZERO series from MSI, or the Stealth series from GIGABYTE, the case remains virtually free from visible cable clutter, even in this small footprint. Since most power and connector cables can be attached to the back of the motherboard, you can skip elaborate cable management and still enjoy a clean look inside your case. Strong cooling in a small space To ensure your powerful hardware is properly cooled even in this compact case, Jonsbo has developed an optimal cooling solution for the space available. With six 120 mm fans for ample airflow, a large dual-tower CPU cooler, or even a 240 mm AiO cooler, your hardware will remain cool even under heavy load. The dust filter at the bottom and the mesh-design side panels make sure your hardware stays free from dust and dirt. As a result, your temperatures always remain at optimal levels and the lifespan of your components is extended.
The CHIEFTEC BW-01B-OP is a high-performance ATX workstation case that combines a timelessly elegant front panel with a modern door design and functional front I/O, including a USB Type-C port. It comes pre-installed with a 120mm PWM-HDB fan, ensuring quiet and long-lasting operation. An easily removable drive cage system allows for flexible use and meets the requirements of digital content creators as well as their long-term data storage needs. Cable management openings with rubber grommets provide a tidy build and efficient airflow. Designed for modern workstation systems, the BW-01B-OP combines performance and style in an elegant, professional case.
Black E-ATX case for NAS, supports up to twelve 3.5-inch HDDs and four 2.5-inch SSDs, eight expansion slots, compatible with graphics cards up to 350 mm in length, CPU coolers up to 160 mm in height, front I/O with 1x USB Type-C, 1x USB Type-A, and a 3.5 mm jack
