The Phanteks XT M3 impresses with its space-saving design, offering you more than enough room for high-end components. Thanks to efficient cooling and neat cable management, this case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact size: Space-saving case for high-end hardware Effective cooling: Supports up to nine fans Large radiator: Accommodates a 360 mm radiator at the top Clean build: Space for neat cable management Back-connect support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Showcase your gaming hardware with the Phanteks XT M3—a compact SFF case made for big ambitions. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case with fans Efficient cooling with fans and radiator The Phanteks case supports the installation of up to nine fans, ensuring a cool build under any load. Three fans can be mounted at the bottom, directly beneath the graphics card, providing extra cooling specifically for your GPU. Additionally, a 360 mm radiator can be installed at the top if you prefer water cooling. Beyond fans and the radiator, the mesh front panel also provides excellent airflow, preventing hot air from accumulating inside your case. Your new gaming PC with clean cable management Laying out cables neatly can be tricky—but with the Phanteks XT M3, cable management is effortless. Cutouts in the right places allow you to route cables cleanly. Combined with support for motherboards with back-connect design, you'll get a tidy build that not only looks great, but also improves airflow. Mini-ITX case built for high-performance hardware Even a large graphics card is no problem—the case offers space for a GPU up to 430 mm in length. Note that you cannot install front fans if you use the full GPU length. The CPU cooler should not exceed a height of 175 mm, and the power supply should be no longer than 150 mm.
• ATX compatibility compacted into the smallest footprint possible. • An ultraslim front panel and frame achieves a more compact form and conserves desk space. • Chamfered edges provide an alternative aesthetic as well as gentler handling. • Pre-installed 3x120mm ARGB PWM fans at front and 1x120mm ARGB PWM fan at rear, with a total maximum fan capacity of 8 fans. • Front/top/rear 120mm fans can be upgraded to 140mm fans. • Supports up to a 240mm AIO radiator OR an air cooler of up to 175mm height. • Accommodates up to 320mm GPU length. • Compatible with Mini ITX / M-ATX / ATX motherboards. • 1 x USB-C 3.2 Gen 2, 2 x USB-A 3.0 ports for total device connectivity. • Houses 2×2.5” SSD + 2×3.5” HDD drives or 3×2.5” SSD drives.
Micro-ATX case, innovative front-mounted power supply, supports GPUs up to 430mm, space for up to seven 120mm fans, separate radiator chamber, glass panels on the front and side, includes three 120mm reverse fansThe Phanteks XT V3 combines compact design with ample room for modern hardware. With stylish glass panels and powerful cooling, your gaming setup becomes a true showcase. Compact Micro-ATX case: ideal for modern builds Ample space: supports GPUs up to 430mm in length Optimized for cooling: up to seven 120mm fans or a 360mm radiator Compatible: with back-connect motherboards Showcase design: tempered glass panels on the front and side The Phanteks XT V3: Compact Mini Case with Plenty of Space Phanteks XT V3 Case Thanks to its compact form factor, the Phanteks XT V3 can be easily integrated into a wide range of gaming or professional setups—while still providing excellent support for modern hardware. The spacious interior offers room for Mini-ITX and Micro-ATX motherboards and supports back-connect motherboards. Additionally, high-performance graphics cards fit with ease, as the Phanteks XT V3 features four PCIe slots and accommodates GPUs up to 430mm. The rear chamber of the case also impresses with an innovative design for premium hardware. Instead of the usual position, the power supply has been relocated to the top front. This allows the Phanteks XT V3 to support full-sized ATX power supplies, providing even greater compatibility. Powerful Cooling Phanteks XT V3 The Phanteks XT V3 delivers outstanding cooling performance. There are seven mounting points for 120mm fans – three at the top, three at the bottom, and one at the rear – allowing for efficient airflow configurations. Out of the box, three powerful M25-120 reverse DRGB fans are pre-installed at the bottom, ensuring strong cooling. Additionally, the Phanteks XT V3 features a dedicated top chamber for a 360mm radiator. This makes it easy to install a powerful AIO cooler, keeping even high-end CPUs reliably cool during intense gaming sessions. Showcase Case Phanteks XT V3 With the Phanteks XT V3, you can display both your hardware and your building skills. The rear chamber provides plenty of space for cable management along with smart routing options for a clutter-free system. Completing the look are tempered glass panels on the front and side, giving you an unobstructed view of your components from every angle. Comprehensive I/O Panel Phanteks XT V3 The Phanteks XT V3 provides outstanding support for your gaming setup, thanks to the front I/O panel located at the bottom right. Here, you’ll find both a USB Type-A and Type-C port with USB 3.2 Gen 2x2 standard. Additionally, a 3.5mm combo audio jack is available for connecting your gaming headset.
Strimer Plus V2 Highly customizable addressable RGB extension cables. Create a unique PC look with outstanding quality and material Compatible with L-Connect 3 for personalizing light effects
HYTE Y70 Milk. Formfaktor: Midi Tower, Type: PC, Produktfarve: Lyserød. Placering af strømforsyning: Bund. Understøttede diametre for sideventilatorer: 120,140 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 320 mm, Dybde: 470 mm, Højde: 470 mm
PC case Volcano Space XL ARGB Full Tower 5 fans, black Youre investing in a top-tier processor, a powerful graphics card, fast RAM, and a solid motherboard, so why would you hide them from yourself and other household members? The MODECOM Volcano Space XL Full Tower is a case designed so that your computer can finally look truly impressive. The front and side tempered-glass panels create a full visual showcaselike hardware displayed in a glass cabinet. Every detail, every ARGB effect (if you install illuminated fans), and every line of your configuration is visible and highlighted by this majestic chassis. MODECOM Volcano Space XL was designed for those who love personalization and perfect internal cable management, while also needing a spacious Full Tower case. Support for motherboards with reversed connectors allows you to build a modern interior without having to expose cables. Thanks to snap-on panels, you gain quick access to the inside. Installing components, upgrading hardware, and cleaning the interior become even easier. The spacious interior gives you full freedom: large E-ATX boards, robust water cooling (up to 420 mm), long graphics cards, and all the components you need for your gaming setup. With the MODECOM Volcano Space XL, your computer will know no limitsand it will look exactly the way it deserves. If you love technology, need plenty of room for expansion, and want your hardware always within sight, the MODECOM Volcano Space XL Full Tower is made for you. Especially in the Volcano Space XL NF version, which gives you complete freedom to configure cooling according to your preferences, as it comes without pre-installed fans. Because bigger can do more. 5 x 140 ARGB RIGHT FROM THE START The right operating temperature is the key to longevity and cool performance of any computer. The MODECOM Volcano Space XL was designed to ensure that your components always work in optimal conditions. As standard, you get five high-performance ARGB fans: three 140 mm fans on the side panel (in a reversed layout) and two 140 mm fans at the back of the case. This setup provides efficient airflow that effectively cools the processor and graphics card, even during intense and long gaming sessions. If you need even more cooling options, the MODECOM Volcano Space XL gives you full freedom to expand. On the top panel, you can install an additional three 120 mm fans, and in the bottom section up to three 120 or 140 mm fans. Additionally, near the PSU shroud, there is space for two more 120 or 140 mm fans if you are not using a top-mounted water-cooling system. More fans mean more stable temperatures and higher performance - and for advanced components, its a necessity.
Das Xilent Flux X916.ARGB ist ein moderner Midi Tower mit starkem Preis Leistungs-Verhältnis. Das robuste SPCC-Stahlgehäuse mit Glasseitenteil bietet Platz für ATX-, micro-ATX- und mini-ITX-Mainboards sowie leistungsstarke Hardware wie GPUs bis 440 mm und CPU-Kühler bis 180 mm. Dank des durchdachten Kabelmanagements bleibt der Innenraum ordentlich, ermöglicht das Anschließen des Mainboards von hinten durch Back-Plug und der Luftstrom optimal. Das integrierte PWM/ARGB-Control Board ermöglicht die Steuerung von Lüftern und Beleuchtung. Mit USB 3.2 Gen 2, 2× USB 3.0 und HD-Audio ist das Xilent Flux X916.ARGB bestens ausgestattet, ideal für preisbewusste Gamer und Systemintegratoren, die Leistung und Optik kombinieren wollen. Mit vier vorinstallierten ARGB Lüftern, integriertem PWM/ARGB-Controller, modernen USB-Anschlüssen und stabilem Stahlchassis bietet das X916.ARGB starke Features zum kleinen Preis
Das Elite 600 ist ein ATX-Mid-Tower-Gehäuse für Systembauer, die Wert auf Leistung und Stil legen. Mit einem Seitenteil aus gehärtetem Glas und einem schlanken, modernen Design bietet es beeindruckendes Kühlpotenzial und unterstützt bis zu 360-mm-Radiatoren für eine effiziente Luftzirkulation. Das Gehäuse verfügt über einen USB 3.2 Gen 2x2 Typ-C Anschluss für schnelle Konnektivität und bietet reichlich Speicheroptionen, darunter Platz für eine 3,5-Zoll-Festplatte, ein 2,5-Zoll/3,5-Zoll-Laufwerk und zwei 2,5-Zoll-SSDs. Es ist für GPUs in voller Größe bis zu 425 mm ausgelegt und bietet Platz für anspruchsvolle Hardware und gleichzeitig eine klare, funktionale Ästhetik für jeden Systemaufbau.
PC case Volcano AQ400 ARGB MIDI BLACK The MODECOM Volcano AQ400 ARGB MIDI is a representative of the Volcano AQ case series, characterized by an eye-catching design with rounded shapes of the front panel (in this case, a perforated metal panel), support for installing motherboards with reversed connectors, four 120 mm ARGB fans included as standard with an ARGB lighting controller, and support for water-cooling radiators up to 420 mm, as well as numerous perforations on the side panels to ensure efficient cooling performance. A distinctive feature of the AQ400 version is the LCD screen located on the side of the case, which allows users to display images, play videos in MP4 format, or monitor temperatures and workload of the processor, graphics card, and RAM usage.All these features are complemented by two USB 3.0 ports and one USB-C port (USB 3.2 Gen 2). This is a case designed to showcase components and personalize the computer to your own style.
PC case Volcano AQ200 ARGB MIDI BLACK The MODECOM Volcano AQ200 ARGB MIDI is a representative of the Volcano AQ case series, characterized by an eye-catching design with rounded shapes of the front panel made of tempered glass, support for motherboards with reversed connectors, four 120 mm ARGB fans included as standard along with an ARGB lighting controller, and support for water cooling radiators up to 420 mm, as well as numerous perforations on the panels to ensure efficient cooling of the computer. A distinctive feature of the AQ200 version is the LED display, which allows monitoring the temperature and workload of the processor, graphics card, and RAM memory. All these advantages are complemented by two USB 3.0 ports and one USB-C port (USB 3.2 Gen 2) located on the side panel. This is a case designed to showcase components and give full control over monitoring their performance.
Kompaktne keskmise torniga ATX-tüüpi arvuti, tiheda võrguga esipaneel; 3 x 120 mm ARGB ventilaatorit, tugi kuni 10 ventilaatorile; 360 mm vedelikjahutuse tugi ja alumised sisendpesad graafikakaardile; Graafikakaart kuni 430 mm, ...
Kompaktne ATX-tüüpi kesktorn, karastatud klaasist esi- ja külgpaneelid; 3 x 120 mm ARGB ventilaatorit eelinstallitud; 360 mm vedelikjahutuse tugi ja põhjaventilaatorid graafikakaardile; Graafikakaart kuni 430 mm, GPU tugiklamber ...
The CHIEFTEC BW-01B-OP is a high-performance ATX workstation case that combines a timelessly elegant front panel with a modern door design and functional front I/O, including a USB Type-C port. It comes pre-installed with a 120mm PWM-HDB fan, ensuring quiet and long-lasting operation. An easily removable drive cage system allows for flexible use and meets the requirements of digital content creators as well as their long-term data storage needs. Cable management openings with rubber grommets provide a tidy build and efficient airflow. Designed for modern workstation systems, the BW-01B-OP combines performance and style in an elegant, professional case.
The Fractal Design Define R5 is the next evolution in the widely popular Define Series. Packed with intelligently designed enthusiast-oriented features delivering a silent case with powerful and expansive air and liquid cooling ...
ARGB - Middle Tower | czarna | window | no power supply | 2 x USB 2.0, 2 x USB 3.0, 2 x Jack | 447mm x 220mm x 510mm | 4 x wen 120mm | ARGB backlight (NPC-1518)
Product kirjeldus: AORUS C700 GLASS - FT - ATX Product Type: System cabinet Form Factor: Full Torn värv: must I/O Ühendusi: 1 x USB 3.1 Gen 2 4 x USB 3.0 1 x HDMI 1 x microphone 1 x kõrvaklapid Supported Motherboards: ATX, microATX, Mini-ITX, Extended ATX System Cabinet Features: Supports Kuni 360 mm radiator in front panel, toetab Kuni 140 mm radiator in rear panel, 2 tempered glass side panels, ARGB controller, RGB Fusion 2.0, toetab Kuni 420 mm radiator in top panel Power Device: No toiteplokk Specification Compliance: ATX mõõtmed (WxDxH): 30.1 cm x 71.4 cm x 67.1 cm kaal: 19.2 kg
MÕÕTMED: 215 x 473.5 x 454 EMAPLAADI TUGI: Mini ITX; Micro ATX; ATX GRAAFIKAKAARDI PIKKUS KUNI: 405 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 170 mm TOITEPLOKI ÜHILDUVUS: ATX; 17 cm KAABLITELE RUUM: Olemas KAAL: 7.2 kg Ühenduvus I/O PANEEL: 1 x headphones; 2 x USB 3.0; 1x microphone PCI PESASID KUNI: 7 Kettasahtlid: 4x 2.5" pesa 3x3.5" Ventilaatoritugi: ÜLESSE PAIGALDATUD - 1x Aspect 12 RGB ETTE PAIGALDATUD -2x Aspect 12 ÜLESSE VÕIMALIK PAIGALDADA 2x120/140 TAHA VÕIMALIK PAIGALDADA 1x120 ETTE VÕIMALIK PAIGALDADA 2x120/140 Radiaatoritugi: ÜLEVAL - 240 mm
