Horizon ARGB FLOW Midi White Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
XPG BATTLECRUISER II ST. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Frontventiler installeret: 3x 120 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 506 mm, Højde: 550 mm. Pakkebredde: 339 mm, Pakkedybde: 643 mm, Pakkehøjde: 615 mm
Das Intel® Wi-Fi 7 BE201 vPro ist ein hochmoderner WLAN-Adapter, der die neueste Wi-Fi 7-Technologie nutzt, um eine unübertroffene drahtlose Konnektivität zu bieten. Mit seinem innovativen Design und der vPro-Integration ist dieser Adapter ideal für geschäftliche Anwendungen geeignet. Die Wi-Fi 7-Technologie ermöglicht ultraschnelle Datenübertragungsraten und eine verbesserte Netzwerkeffizienz, während die vPro-Funktion eine einfache Verwaltung und Integration in Unternehmensumgebungen ermöglicht. Mit seinem kompakten Formfaktor bietet der Intel® Wi-Fi 7 BE201 vPro eine zuverlässige und leistungsstarke drahtlose Netzwerkverbindung, die den Anforderungen anspruchsvoller Unternehmensumgebungen gerecht wird.
The chassis stand for the Tower 600 Light-year Green includes a base cover for the case and a display stand. It allows users to set up their Tower 600 Light-year Green horizontally, making it easy to customize the case and create a unique experience. A dust filter is also attached to the base plate to provide protection against dust. The chassis stand comes with rubber pads to prevent scratching the chassis during installation. The abrasion-resistant material ensures long-lasting protection without affecting the finish of the tower. The small raised sections of the anti-slip design are strategically placed to provide secure grip and prevent unwanted slipping during use.
Small case for simple systems Two low-profile expansion slots for graphics cards Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on a desk thanks to its lightweight design, and its simple black aesthetic fits into any setup. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports installing ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. The two low-profile expansion slots allow the installation of a low-profile graphics card up to 190 mm in length. When it comes to the power supply, only a 1U Flex power supply is supported, which should not be larger than 150 mm.
The LCD Panel Kit is an exclusive expansion accessory for the The Tower 200 Turquoise case. With its 3.9-inch LCD display, users can use the TT RGB Plus 2.0 software to gain full control over performance monitoring and customized effects. In addition, the LCD Panel Kit can be combined with other Thermaltake Ultra series products, providing an optimal visual LCD experience.
White mini tower, supports motherboards up to Micro-ATX, accommodates 3x 2.5- or 3.5-inch drives, CPU cooler up to 145 mm in height, GPU up to 260 mm, 2x 120 mm fans pre-installed at the frontStylish mini case with three sides made of tempered glass Two 120 mm fans pre-installed at the front, with option for an additional fan up to 92 mm at the rear Supports Micro-ATX motherboards and CPU coolers up to 145 mm in height GPUs up to 260 mm in length Supports up to three 2.5- or 3.5-inch drives The Jonsbo V12 in Detail The Jonsbo V12 is a mini case that, despite its compact size, provides ample space for powerful hardware. Tempered glass on three sides gives you a perfect view of your installed components, and a stylish wooden front completes the overall aesthetic. Cooling The mini tower comes pre-installed with two 120 mm fans, ensuring efficient cooling. If needed, an additional fan up to 92 mm can be installed at the rear. Hardware Options The mini tower supports the installation of Micro-ATX size motherboards. The CPU cooler should not exceed 145 mm in height. The graphics card can be up to 260 mm long. For storage, up to three drives can be installed to accommodate programs and games.
Darkflash DS900WD ATX computer case (black) + 4 fansDarkflash DS900WD is an enclosure designed for users who want practical solutions. The tempered glass side panel and wooden front panel provide good visibility of components and give the whole case a distinct look. It allows the installation of motherboards in ATX (Advanced Technology eXtended, a standard motherboard format), M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) formats, giving you great flexibility when building your computer. With a spacious design and multiple mounting options, it provides convenience in assembling the kit and good air circulation. The kit comes with 4 fans.Various cooling optionsThe DS900WD offers space to install 12 120 mm fans or 2 140 mm fans and water cooling at the top 360 mm or 240 mm, and at the front 240 mm. This allows you to build an effective cooling system for powerful configurations. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation. As standard, the chassis is equipped with 4 fans to promote air circulation right from installation.Thoughtful layout and ample spaceThe chassis will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. There are seven PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots, allowing the kit to be expanded with additional expansion cards. For storage media, space is provided for two HDDs (Hard Disk Drive, hard drive) or one SSD (Solid State Drive, solid state drive) and one HDD, so you won't run out of space for games and files.Built-in portsThe Darkflash DS900WD chassis is equipped with a set of the most commonly used ports that make everyday use of the computer easier. On the top panel you'll find one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), while 2 additional USB 2.0 ports are ideal for connecting a mouse, keyboard, headphones or other accessories. There is also an HD Audio (High Definition Audio, a high-quality audio connector) for convenient connection of headphones and a microphone.Refined detailsOn the right side of the case is a metal mesh that not only provides adequate ventilation, but also blocks larger dust particles from entering the case. What's more, the top and bottom mesh panels also protect your equipment from debris, and their magnetic design makes them easy to install and remove.Durable construction and stylish designThe body of the case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - structural steel), which ensures high durability. The whole thing measures 470 x 218 x 454 mm and fits into standard under-desk spaces. The stylish design and the ability to illuminate the fans make the set look modern.Includedcomputer casefan x4user manual ManufacturerDarkflashModelDS900WD ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installed4Type of fansINF24T ARGBButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight454 mmWidth218 mmDepth470 mm
Das Inter-Tech ODS-716 für Raspberry Pi 4B ist komplett aus Aluminium gefertigt und bietet, zusammen mit den beiden integrierten Wärmeleitern für CPU und RAM ideale Wärmeleitfähigkeiten. Der Boden und Deckel des Gehäuses werden miteinander verschraubt, was zur Stabilität des gesamten Aufbaus beiträgt.
This slot bracket by Delock expands the PC by two USB 3.0 Type-A sockets. The cable of the slot bracket is connected internally to the mainboard to a 19 pin USB 3.0 pin header. The internal connection is then led outwards in order to connect devices with USB Type-A connection to the computer.Item no.: 1820459 Slot bracket type EAN Code 4043619848362 Manufacturer part number: 84836 Further information Cable length without connectors: approx. 50 cm
Das APNX V2 ist ein Premium-PC-Gehäuse, das für hervorragende Kühlung, elegante Ästhetik und Anpassungsfähigkeit entwickelt wurde. Seine drei abnehmbaren Hartglasplatten bieten einen rahmenlosen Panoramablick, während das X-Pand Flow Design die Gesamtluftströmungsdynamik erheblich verbessert. Mit Unterstützung für bis zu 10 Lüfter, 360-mm-Kühler und zwei 16-cm-Lüfter an der Unterseite sorgt es für eine erstklassige Wärmeleistung. V2 unterstützt gängige Mainboards mit Reverse-Anschluss für eine übersichtlichere Kabelverwaltung. Funktionen wie eine GPU-Halterung, eine abnehmbare Motherboard-Kabelabdeckung und ein austauschbares PSU/HDD-Fach verbessern die Haltbarkeit und Anpassungsmöglichkeiten. Mit vertikaler oder horizontaler 360-mm-AIO-Montage und Unterstützung für den APNX 10-Port-Lüfter-Hub bietet das APNX V2 effiziente Kühlung und mühelose Anpassungsmöglichkeiten für Hochleistungs-Builds.
Das RM53-502 unterstützt Mainboards mit einem Formfaktor bis zu SSI EEB und besitzt zudem insgesamt 8 PCI-Erweiterungssteckplätze, die problemlos bis zu 4 Grafikkarten in Servergüte aufnehmen. Die von der Vorderseite zugänglichen Anschlüsse für Erweiterungssteckkarten und das Design der E/A-Komponenten sind für diese Ausrichtungsweise mit untereinander austauschbaren Griffleisten und Einschubschienen ausgestattet. Im Inneren sind Optionen in vorder- und rückseitigen Konfigurationen für untereinander austauschbare Montagepositionen des 5,25-Zoll-Käfigs und des Netzteils vorhanden. Entsprechend der SilverStone-Designphilosophie für Gehäuseeinschübe ist das RM53-502 zur Verbesserung der Kühlleistung von Servergehäusen mit Flüssigkeitskühlern in Größen bis zu 360 mm kompatibel, die für eine effiziente Wärmeableitung und optimale Leistung sorgen.
Mit einem 270°-Panoramablick durch nahtlose Hartglasplatten an Vorder- und Seitenfläche präsentiert das Lucid 05 Ihre Komponenten eindrucksvoll aus nahezu jedem Blickwinkel. Der Lucid 05 verfügt über insgesamt 11 Lüfterhalterungen und sorgt so für eine effektive Luftzirkulation nicht nur für CPU und GPU, sondern auch für das System und die Speicherlaufwerke. Das obere Fach unterstützt einen 360-mm-Wasserkühlungsradiator für eine effiziente Wärmeableitung in Hochleistungssystemen. Mit der kürzlichen Einführung der RTX-50-Serie wurde das Lucid 05 so konzipiert, dass es Grafikkarten mit einer Länge von bis zu 410 mm unterstützt.
Clear lines, strong cooling, uncompromising look: With the Steel Shark, Sharkoon presents a stylish two-chamber ATX case that combines modern design with a particularly tidy look. Tempered glass on the front and side, four pre-installed ARGB PWM fans as well as extensive cooling options and BTF support make the Steel Shark the ideal basis for powerful and visually impressive gaming systems. Thanks to the well-thought-out two-chamber design, the Steel Shark clearly separates hardware and power supply including cable management. This creates an extra tidy look in the main area, while cables, drives and power supply can be discreetly stored at the back. The front and side panels of the Steel Shark are made of tempered glass and provide a clear view of the built-in hardware and the integrated lighting. This makes the case perfect for users who want to present their system not only powerfully, but also visually impressively. The Steel Shark is equipped with four 120 mm ARGB PWM fans ex works. These not only ensure an effective airflow, but also skillfully showcase the system visually. A practical ARGB control and a PWM fan hub with five positions are included! A total of up to eleven fans can be installed in the Steel Shark. In addition, the housing supports the simultaneous installation of two radiators and is therefore also aimed at water cooling enthusiasts who want to cool their system particularly efficiently and quietly. In addition to classic ATX motherboards, the Steel Shark also supports models with a BTF design. The rear connection technology further optimizes cable management and further underlines the clean look of the system. The Steel Shark is also flexible when it comes to selecting powerful hardware: It supports graphics cards with a length of up to 424 mm, CPU coolers with a height of up to 168 mm and power supplies with a length of up to 244 mm. Tower case type Color black EAN 4044951044924 Made in China Midi tower design Motherboard form factor ATX Tempered glass material Window Kit Yes Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 168 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 244 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Front 3 x 120 mm ARGB-PWM fans pre-installed Back 1 x 120 mm ARGB-PWM fan pre-installed Notes Cable management system, graphics card holder, top: 3 x 120 mm fans can be installed, alternatively 2 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed Lighting Yes, RGB RGB connectors addressable RGB header RGB standard AURA Sync, Mystic Light, RGB Fusion, RGB LED Water cooling possible Yes Water cooling possible Supported radiators Front: 360 mm, Top: 360/280 mm Rear connection of the motherboard Yes Note If the graphics card is longer than 270 mm, there may be conflicts when installing a radiator in the side Accessories available accessory set Volume 59 l Dimensions Width: 28.5 cm x Height: 45.2 cm x Depth/Length: 46 cm
The Grandia GD10, along with GD09, is a culmination of SilverStone’s decade-long experience in HTPC case design and manufacturing into a product that every PC enthusiast can enjoy. The incredible efficiency in which it utilizes all available space results in a case that is close in size externally to Micro-ATX based GD04 and GD05, yet capable of fitting most important full size standard components including wider ATX motherboards (SSI-CEB) such as ROG or other gaming-centric models. All drive cages have been designed similarly to those from the popular ML03 case to provide maximum flexibility in drive configuration without the need for additional adapters. For cooling, all positive pressure and smooth airflow designs were retained from previous Grandia models while improvements were made to filter access for even easier maintenance. With the addition of a lockable front door, the GD10 offers an attractively sized case that is capable and user-friendly for those interested in building a system with extra security and application that exceeds typical PC or HTPC environments.- Lockable front door ensures security of system and drives- Positive air pressure design for excellent cooling/quietness and dust-prevention- Support expansion cards up to 12.2 inches- Support ATX motherboards- Quick access filters included- Incredible 362mm depth to fit comfortably inside home theater cabinet- Drive cages with multi-purpose mounts eliminate need for adaptersFormat ATX, SSI-CEBMaximum graphics card lenght 310 mmMaximum CPU-Cooler Height 138 mmSpecial Featuress two 120-mm-Fan auf der rechten Seite included (900 U/min, 18 dB(A)); ein 120-mm-Fan auf der linken Seite included (900 U/min, 18 dB(A)), compatible with 80-mm-FanPower Supply SlotDesign ATXDrive Baysexternal 5,25 inches 1internal 3,5 inches 22,5 inches 1FansIncluded 3x 120 mmInstallable 2x 80 mmFront-SidePorts USB 3.0 2Audio 2Back-SideSlots Full-Size 7additional Full-Size 1Product dimensions 442 x 171 x 362 mmWeight 4.8 kg
The IPC SC-4004 is a case built for Mini-ITX Mainboards and has a quadruple Hot-Swap-frame for HDDs. A serial 120mm fan in the back of the case ensures a reliable and optimal cooling.The power supply inside the IPC SC-4004 is an optional Flex-ATX PSU which is mounted upright in the right part of the case. Also the case offers the option of an additional plug-in card (for example graphic card).KujutegurSmall Form Factor (SFF)TüüpPCMaterjalTeras3,5" lahtrite arv4Emaplaadi toetatud kujuteguridMini-ITXToote värvMustAknagaEi2,5" salvede arv5Sisemiste 2,5" salvede arv1Materjali paksus1 mmLaienduspesade arv1Toetatud elektritoite tarne vormi faktoridATXUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk1AudiosisendEiAudioväljundEiInstallitud tagaventilaatorid1x 120 mmToetatud tagaventilaatorite läbimõõt120 mmToetatud kõvakettasuurused2.5,3.5"Toetatud kõvaketaste arv5KäigultvahetusJahLED-indikaatoridTegevus, HDD, VõimsusLaius220 mmSügavus260 mmKõrgus190 mmKaal3,87 kgPakendi laius270 mmPakendi sügavus335 mmPakendi kõrgus280 mmPakendi kaal4,44 kg
No. of drive bays: 6 Dimensions: 455 x 205 x 475 mm Weight: 5.27 Other features: - PSU mounting location: bottom of the housing- Power supply tunnel: YES- CPU cooling height: 163 mm- Maximum length of the graphics card: 395 mm- Side panel with a window: YES, made of tempered glass- Filter under the power supply: YES- Filter on the upper panel: YES- Filter on the front panel: YES- Steel thickness: 0.7 mm- Increased space for PSU: 240 mm- Rubber flanges for cable entry holes- All herrings twisted in place of the broken ones- The radiator can not be installed on the front panel
Tootja: AKYGA Tootegrupp: arvutikorpus arvutikorpuse tüüp: ATX Ümbrise tüüp (motherboard type): ATX, MicroATX, Flex ATX, MINI ITX Supported toiteploki standards: ATX external 3,5"sahtleid: 0 external 5,25"sahtleid: 1 external 5,25" väikseid sahtleid: 0 internal 2,5"sahtleid: 3 internal 3,5"sahtleid: 3 intenal 5,25"sahtleid: 1 paigaldatud toiteplokk(ies): Ei maksimum toiteplokke: 1 toiteploki võimsus: andmed puuduvad elektripesade pistikuid Serial ATA: andmed puuduvad ATX toiteploki ühenduspesa tüüp: andmed puuduvad +12V elektripesa tüüp: andmed puuduvad I/O Ühendusi: 1x stereo mini-jack (kõrvaklappide väljund), 1x stereo mini-jack (mikrofon input), 2x USB 3.0, 1x USB 2.0 ventilaatori kiiruse regulaator: Ei paigaldatud ventilaatoreid: 0 maksimaalne kogus of fans: 3 laius: 200 mm pikkus: 418 mm kõrgus: 412 mm pesade arv korpuses: 7 tk külje õhukanal: Jah tööriistavaba kokkupanek: Ei värv: must Lisaomadused: andmed puuduvad Lisainfo: Product Site
