The Corsair FRAME 4000X RS PC case was specifically designed for first-class airflow and ensures efficient cooling of your components. Thanks to the well-thought-out mesh panels and optimized airflow design, your PC system stays cool and powerful even under heavy load. Black mid-tower with built-in RGB front Wide range of fan and radiator mounting options for effective cooling performance Motherboards up to E-ATX, including back-connect designs Space for graphics cards up to 405 mm and CPU coolers up to 170 mm high Includes 4x RS120 fans Corsair FRAME 4000X RS: RGB PC case with built-in fans The Corsair FRAME 4000X RS mid-tower offers the perfect balance between size and functionality. With plenty of room for powerful hardware and efficient cooling, it is the ideal choice for gaming builds. Extensive cooling options with fans and radiators To keep your hardware cool under any workload, up to 13 120 mm fans can be installed in the Corsair FRAME 4000X RS at the same time. The top, front, and side support three 120 mm fans and two 140 mm fans. The top even supports two 200 mm fans. Two additional 120 mm fans can be installed above the power supply shroud, while one more 120 mm or 140 mm fan can be mounted at the rear. An AiO liquid cooler can also be installed without any problems if you prefer to cool your powerful hardware with liquid cooling. Large radiators up to 360 mm can be installed at the top, front, and side, while only 120 mm or 140 mm radiators can be installed at the rear. Four pre-installed fans make it easy to get started: three RS120 fans are mounted at the front, and one more at the rear. Installing your hardware The case offers enough space for powerful gaming hardware. It supports graphics cards up to 405 mm. Motherboards up to the E-ATX form factor are supported, including motherboards with rear-facing connectors. The CPU cooler should not exceed a height of 170 mm. A total of three drives can be installed to store programs and games.
ENDORFY Fishtank 6000 Corona is a showcase PC case that provides a panoramic view of your PC. Two glass panes and the elegant, slim design showcase your components particularly effectively. The very good compatibility - also for motherboards with rear connectors and in SSI-CEB format (E-ATX) as well as support for up to two 360 mm radiators - makes it a solid basis for a high-end PC. On the Fishtank 6000 Corona, the I/O panel is located in the lower area of ??the side wall and remains easily accessible at all times when the housing is on the desk - regardless of the orientation. To There is one USB-C 3.2 Gen 2 port (up to 10 Gbps), two USB-A 3.2 Gen 1 ports (up to 5 Gbps) and a combination audio port for headphones and microphone. The Fishtank 6000 Corona offers versatile options for configuring the cooling system - for both air and water cooling. Large radiators measuring 360 mm or 240 mm can be installed at the top, while 360 ??mm or 280 mm are also possible on the side. In addition, CPU air coolers with a height of up to 182 mm are supported and up to 9 × 120 mm or 7 × 140 mm fans can be installed. This component compatibility gives you flexibility when putting together a powerful system. The large internal volume, comparable to the Arx 700 series, offers space for powerful components - including graphics cards with a length of up to 445 mm and up to 7 expansion cards. There is space inside for a maximum of 3 data carriers (1× 2.5", 1× 3.5" and 1× 2.5"/3.5"). Mounting radiators and fans is made easier with an additional side bracket that allows components to be secured before installation into the case. Easily removable panels as well as magnetic filters on the top and side walls and a bottom filter that can be pulled out from both sides make this easier Cleaning. Fishtank 6000 Corona is equipped with four pre-installed ENDORFY Corona 120 fans - three reverse on the side and one standard fan on the back. The double-sided ARGB ring provides impressive lighting from every angle, while the speed range of 200-1600 rpm, the precise PWM control and the FDB bearing ensure smooth running (especially in semi-passive operation), durability and good airflow. The fans are already connected to a PWM splitter with an ARGB controller (5 connections each), which allows both control via the mainboard and autonomous operation with predefined lighting effects. Tower case type Color black EAN 5903018669434 Manufacturer no. EY2A025 Fishtank 6000 series Midi tower design Mainboard form factor E-ATX, SSI-CEB Material steel, tempered glass Window Kit Yes Internal dimensions plug-in card length maximum 445 mm Internal dimensions CPU cooler height maximum 182 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 250 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x 120 mm Corona fan pre-installed (200-1600 rpm) Notes Dust filter: Side, top, and bottom, Convenient cable management, Side: 3 x 120 mm Corona reverse fans pre-installed (200-1600 rpm) Lighting Yes, RGB RGB connectors addressable RGB header Water cooling possible Yes Water cooling possible. Supported radiators: side: 120/140/240/280/360 mm, top: 120/240/360 mm, back: 120/140 mm. Rear connection of the motherboard Yes Feature Slim “aquarium” style chassis, support for vertical GPU mounting Note (E-ATX up to 280 mm width) Accessories available 3× Pre-installed ENDORFY Corona 120 reverse fan, 1× Pre-installed ENDORFY Corona 120 fan, 1× Pre-installed PWM splitter with ARGB controller, 1× Mounting set, 1× Cable tie set, 1× Velcro set for cables, 2× Replacement clips for the side panel, 1× Microfiber cloth, 1× Instructions Volume 55 l Dimensions Width: 24 cm x Height: 47.3 cm x Depth/Length: 48.7 cm Weight 9.1kg
Classic 19" Rack with a lot of space for different drivesYou can remove the HDD cages with a few steps for easy mounting of internal devices.5 mounting slots with full height and the possibility to mount an ATX PSU ensures a professional and cost efficient solution.The lockable doors in front of the slots prevent, unauthorized access.Integrated air filters ensure clean air and a flawless cooling.KujutegurPüstikTüüpServerMaterjalTeras5,25" lahtrite arv43,5" lahtrite arv5Emaplaadi toetatud kujuteguridATX,Micro-ATX,uATX,Mini-ITXToote värvMustAknagaEi2,5" salvede arv2Sisemiste 3,5" salvede arv5Väliste 5,25" kettalahtrite arv4Püstikmontaaž3UMaterjali paksus1,2 mmSertifikaatRoHS, CEKaasas toiteplokkEiUSB 2.0 portide arv2AudiosisendEiAudioväljundEiInstallitud tagaventilaatorid2x 80 mmMaksimaalne tagaventilaatorite arv2Toetatud tagaventilaatorite läbimõõt80 mmToetatud kõvakettasuurused2.5,3.5"LED-indikaatoridVõimsus, HDDLähtestusnuppJahLaius485 mmSügavus530 mmKõrgus133 mmKaal9,34 kgPakendi laius560 mmPakendi sügavus630 mmPakendi kõrgus225 mmPakendi kaal11,1 kg
Case type: Cube Case, Midi-Tower Form Factor: Micro-ATX, Mini-ITX Colour: Black Main colour: Black Accent colour: Gold Noise dampening: No Width(exact): 260 Height(exact): 190 Depth(exact): 280 Width: 200 - 300 mm Height: 100 - 200 mm Depth: 200 - 300 mm Material: Plastic, Steel Weight (exact): 2 Weight: up to 2 kg, 2 - 4 kg USB: 2x USB 3.0: 2x Audio output: 1x Audio input: 1x Internal 2.5" bays: 4x Internal 3.5" bays: 3x PCI slots: 2x Motherboard tray: no Remote: no Cable management: no Front LCD/TFT display: no Filter: no Power supply: no Power supply format: ATX Power supply position: Rear Lower Fans pre-installed: 1x 120mm 120mm Fan: 1 Fan colour: Black Fan controller: no Card reader: no Front door: no Hot-swap: no Position I/O: Front/Cover HDD anti-vibration: no Radiator-mounting: no Lighting: no
Product kirjeldus: AORUS C700 GLASS - FT - ATX Product Type: System cabinet Form Factor: Full Torn värv: must I/O Ühendusi: 1 x USB 3.1 Gen 2 4 x USB 3.0 1 x HDMI 1 x microphone 1 x kõrvaklapid Supported Motherboards: ATX, microATX, Mini-ITX, Extended ATX System Cabinet Features: Supports Kuni 360 mm radiator in front panel, toetab Kuni 140 mm radiator in rear panel, 2 tempered glass side panels, ARGB controller, RGB Fusion 2.0, toetab Kuni 420 mm radiator in top panel Power Device: No toiteplokk Specification Compliance: ATX mõõtmed (WxDxH): 30.1 cm x 71.4 cm x 67.1 cm kaal: 19.2 kg
No. of drive bays: 4 MOLEX power connectors: 0 Floppy power connectors: 0 SATA power connectors: 0 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 0 8-pin 12V power connectors: 0 Weight: 6.1
The ASUS TUF Gaming GT502 Plus mid-tower case is designed for gamers and PC enthusiasts who demand both style and functionality. It features a robust cooling system that supports multiple fan and radiator configurations, ensuring that your system remains cool under pressure. The panoramic tempered-glass panels offer a window into your gaming world, showcasing your components and ARGB lighting. With support for a variety of motherboard form factors and ample room for high-end graphics cards and CPU coolers, the GT502 Plus is a versatile foundation for any custom gaming build. Its innovative design includes a dual chamber layout for better airflow and cable management, along with comprehensive dust filtration to keep your system clean. Whether you're building a new PC or upgrading an existing one, the ASUS TUF Gaming GT502 Plus offers the features and flexibility you need to create a stunning, high-performance gaming setup.
The Gembird Fornax M100B system cabinet combines functionality with style, making it a suitable choice for gamers and PC enthusiasts. This tower chassis features a glass windowed side panel, allowing users to display their system's internal components with pride. The front panel is equipped with USB and audio connectors for easy access, while the blue color ring on the cooling system adds a distinctive look to your setup.Designed for optimal airflow, the Fornax M100B includes two 120 mm fans at the front, ensuring your components stay cool during intense gaming sessions. The case supports video cards up to 330 mm in length and is compatible with ATX mainboards, offering flexibility for various system builds. With four internal expansion bays, users have ample space for both 2.5" and 3.5" drives, providing plenty of options for storage expansion.Constructed with quality materials, including SGCC and glass, and compliant with ISO 9002 and RoHS standards, the Fornax M100B is a durable and environmentally friendly choice for your next system build.
CTE C750 TG ARGB Snow Full Tower case The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support up to 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB Snow is a high-end presentation case that allows you to imagine something outside the box. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Snow Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance.
Elegant Micro-ATX case by Jonsbo in black, subtle design made of steel, with tempered glass side panel, supports graphics cards up to 330 mm, up to 7x 120 mm fans possible
CTE T500 TG ARGB Snow Full Tower Chassis The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support up to a 420mm AIO radiator at the front and a maximum 360mm AIO radiator at the rear. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE T500 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE T500 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. Experience the perfect combination of design and performance with our CTE T500 The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support a maximum of a 420mm AIO radiator at the front and a maximum of two 360mm AIO radiators at the front and rear. There's plenty of room to install cooling components, including front and rear fan brackets, top and right fan vents, bottom fan vent, and shroud vent, and the case can accommodate up to eleven 140mm/120mm fans. Other cool details include removable filters, pump and tank support, and Velcro straps for easy cable management. Our CTE T500 Snow is the perfect choice whether you're looking for a custom liquid cooling setup or a dual AIO setup! Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE T500 TG ARGB's versatile interior features two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Support for dual 360mm radiators Our CTE T500 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, allowing users to install up to two 360mm radiators simultaneously at the front and rear. To ensure AIO compatibility, users can install up to one 420mm AIO radiator on the front and up to two 360mm AIO radiator on the front and rear. All your dream cooling components will fit! The CTE T500 Full Tower case has a huge fan and cooler installation capacity: up to eleven 140 mm/120 mm fans and 360 mm AIO coolers in various locations (420 mm AIO cooler at the front). Moreover, equipped front and rear fan brackets and mounting locations on the top, right side and lid ensure easy installation of all desired cooling components. Rock your world with three pre-installed white 140mm CT140 ARGB fans The CTE T500 TG ARGB Snow Full Tower case is equipped with three white 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. We've tested everything, so you don't have to At Thermaltake, we always stress test our products under harsh conditions to ensure product quality. CTE T500 TG ARGB Snow Full Tower Chassis products have been tested at 100% full load for 30 minutes, with the highest-end CPU, GPU and motherboard at the time of testing, compared to a consumer-style configuration, which allowed us to test how the chassis handles in real-world situations.
Midi-Tower PC case in ATX form factor, made of steel and plastic, foldable side panel with magnetic closure, front made of fine mesh, GPU support up to 330 mm, suitable for 360 mm radiator
ATX case with 270° glass panel, up to ten fans possible, GPUs up to 420 mm / CPU up to 165 mm height, up to three drives possible, radiator up to 360 mm, 1x USB-C / 2x USB-A
Horizon ARGB FLOW Midi Black Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
Zalman P30 V2 micro-ATX Case with Tempered Glass and Panoramic View - Black The Zalman P30 V2 micro-ATX case in elegant black offers a perfect combination of compact construction and elegant design. With a large side panel made of tempered glass and panoramic view, it highlights the installed components and enables optimal presentation. The V2 version offers improvements in design and function, perfect for modern PC builds and gaming setups. Main features of the Zalman P30 V2 case: Panoramic Tempered Glass Side Panel : Allows a clear and elegant view of your hardware. Compact micro-ATX design : Optimized for micro-ATX and mini-ITX motherboards, ideal for space-saving and high-performance builds. Improved Cooling Performance : Supports multiple fan options and water cooling for efficient heat dissipation and stable operation. Stylish Black Finish : Timeless design that fits into any modern setup and gives a professional look. The Zalman P30 V2 case is ideal for PC enthusiasts looking for a combination of functionality and aesthetics. The high-quality workmanship and the panoramic view make it the optimal choice for demanding builds.
