4x 120mm A-RGB Rainbow fans pre-installed - Front mesh design for high airflow - Slide-in TEMPERED GLASS side panel - 3PIN +5V A-RGB M/B Sync via RGB control hub
Vielseitiger Midi-Tower in Weiß, Front- und Seitenteil aus Tempered Glass, mit Reverse Mode und hochkanter Grafikkartenmontage, für bis zu 10 Lüfter, 1x USB 3.1 Typ C / 2x USB 3.0 Typ A
Markenqualität zu einem unschlagbaren Preis bietet das neue LT-01B-350GPB. Zeitloses Design, hochwertige Fertigung mit dem entscheidenden Mehr an Extras lassen keine Wünsche offen.
Internally 3x 2.5 "/3.5" (cross, drive rails), 3x 2.5 ", Front I / O 2x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphones, PCI slots 5, Fan (front) 1x 200mm, 800rpm (RGB illuminated), or 2x 140mm (optional), Fan (rear) 1x 140mm (optional), Fan (top) 2x 140mm (optional) or 4x 120mm (optional), Fan (below) 2x 120mm (optional), Radiator sizes 120/140/180 / 240mm at the front, 120/140/180/240 / 280mm at the top, Motherboard up to μATX, Power supply ATX, Power supply position below, CPU cooler up to max. 185mm height, Graphic cards up to max. 350mm, Color black / silver, inside black, Dimensions (WxHxD) 330x348x430mm, Volume 49.38l, Weight 8.70kg, Special features Cable management, dust filter, mainboard is installed twisted (rear connections), glass viewing window, CA-1L2-00S1WN-00
Internal 2x 2.5 "/3.5" (transverse, hard disk cage), 2x 2.5 ", Front I / O 1x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphone, PCI slots 4, Fan (front) 2x 140mm (optional), Fan (rear) 1x 120mm, 1000rpm, 16dB (A), Fan (top) 1x 200mm (optional) or 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 330mm, Color black, inside black, Lighting integrated LED control, integrated RGB LED lighting, Dimensions (WxHxD) 220x411x441mm, Volume 39.88l, Weight 6.10kg, Housing type mini tower, Special features dust filter, viewing window made of glass, CA-1Q9-00S1WN-00
No. of drive bays: 4 Dimensions: Product dimension: (L x W x H) 407 x 215 x 455 mm Weight: 5.39 Other features: PCI expension slots: 7 Dust filter: 1 x top, 1 x bottom(PSU), 1 x front Fans control by: Motherboardremote controllerLED buttonVoice control/ Fans included: 4 x 120 mm ARGB, 6 pin, 1200 RPM (3 x front, 1 x rear) connected to the controller Fan support: front: 3 x 120/140 mm lub 2 x 200 mm rear: 1 x 120 mm top: 2 x 120 (140) mm bottom: 2 x 120 mm Watercooling support: front: 1 x 120/240/360 mm rear: 1 x 120 mm top: 1 x 120/240 mm Product dimension: (L x W x H) 407 x 215 x 455 mm Chassis material: SPCC 0.6 mm Front Panel Material: Big hole mesh Net/gross weight: 5.39 / 6.04 kg
Experience the ATX case 7039B from LC-Power!7039B offers you a lot of features and a great variety of system configurations for ATX, Micro ATX and Mini ITX systems!
The Lian Li LANCOOL 215 ARGB Tempered Glass Midi-Tower in white is a stylish computer case that can accommodate E-ATX motherboards. It has two radiator slots that can fit a maximum of 360mm and 280mm radiators, respectively. The case comes with three pre-installed fans, two 200mm ARGB fans, and one 120mm fan, and includes a fan and RGB controller. The case also features a tempered glass side panel.
Vielseitiger Midi-Tower in Grau, Front- und Seitenteil aus Tempered Glass, mit Reverse Mode und hochkanter Grafikkartenmontage, für bis zu 10 Lüfter, 1x USB 3.1 Typ C / 2x USB 3.0 Typ A
The Raspberry Pi 5 case is made of ABS construction with cut-outs for the dual HDMI, Audio/Video, USB, Ethernet ports, as well as the USB-C power connector and access to the microSD card. The status LED can be easily visible through the rubber reflector. An optional clip-on lid can be removed to provide access to your Raspberry Pi's GPIO pins or connect a HAT. The case is a refinement of the Raspberry Pi 4 case, with improved thermal features to support the higher peak power consumption of Raspberry Pi 5. It integrates a variable-speed fan which is controlled by a dedicated connector on the Raspberry Pi 5 PCB. The case is available in Pi's signature red-white combination.
