Eleganter Midi-Tower für Gaming-PCs, mit Front aus Walnussholz, kompatibel mit E-ATX Mainboards, Seitenteil aus Temperglas, bis zu 7x 120-mm-Lüfter oder 6x 140-mm-Lüfter, bis zu 2x 3,5-Zoll oder 4x 2,5-Zoll-Laufwerke, I/O-Panel mit 1x USB 3.1 Typ C und 2x USB 3.0 Typ A
Midi-tower case, with tempered glass side panel, top and front with mesh, three integrated PWM-ARGB fans, subtle ARGB lighting with integrated control.
CTE T500 TG ARGB Snow Full Tower Chassis The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support up to a 420mm AIO radiator at the front and a maximum 360mm AIO radiator at the rear. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE T500 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE T500 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. Experience the perfect combination of design and performance with our CTE T500 The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support a maximum of a 420mm AIO radiator at the front and a maximum of two 360mm AIO radiators at the front and rear. There's plenty of room to install cooling components, including front and rear fan brackets, top and right fan vents, bottom fan vent, and shroud vent, and the case can accommodate up to eleven 140mm/120mm fans. Other cool details include removable filters, pump and tank support, and Velcro straps for easy cable management. Our CTE T500 Snow is the perfect choice whether you're looking for a custom liquid cooling setup or a dual AIO setup! Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE T500 TG ARGB's versatile interior features two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Support for dual 360mm radiators Our CTE T500 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, allowing users to install up to two 360mm radiators simultaneously at the front and rear. To ensure AIO compatibility, users can install up to one 420mm AIO radiator on the front and up to two 360mm AIO radiator on the front and rear. All your dream cooling components will fit! The CTE T500 Full Tower case has a huge fan and cooler installation capacity: up to eleven 140 mm/120 mm fans and 360 mm AIO coolers in various locations (420 mm AIO cooler at the front). Moreover, equipped front and rear fan brackets and mounting locations on the top, right side and lid ensure easy installation of all desired cooling components. Rock your world with three pre-installed white 140mm CT140 ARGB fans The CTE T500 TG ARGB Snow Full Tower case is equipped with three white 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. We've tested everything, so you don't have to At Thermaltake, we always stress test our products under harsh conditions to ensure product quality. CTE T500 TG ARGB Snow Full Tower Chassis products have been tested at 100% full load for 30 minutes, with the highest-end CPU, GPU and motherboard at the time of testing, compared to a consumer-style configuration, which allowed us to test how the chassis handles in real-world situations.
Tootekood: DS900 White + fansGTIN: 5905316148963Korpused
Computer case Darkflash DS900 (white) + 7 ARGB FansDarkflash DS900 is a modern solution for demanding users who value both aesthetics and functionality. The distinctive white design with a panoramic design without an A-pillar, equipped with double fully transparent glass walls, not only looks striking, but also provides excellent visibility of components. The case is designed to provide optimal cooling, performance and versatility, while offering ease of modification and expansion of computer systems. In the set you will find 7 ARGB 120 mm fans.Durability and aestheticsThe Darkflash DS900 stands out for more than just its looks. It is an enclosure built with durability in mind. The support mechanism and sturdy construction provide stability and security for all computer components, which is especially important for system expansion.Effective coolingEvery computer needs a good cooling system, and the DS900 provides it without question. The ability to mount up to 10 120 mm fans and a large 360 mm heatsink makes the case ideal for those who expect high performance and reliability, especially during intensive use.Protection and ease of useThe case is designed to protect the inside of the computer from dust, which is important for maintaining cleanliness and performance. In addition, its clever design makes it easy to upgrade and expand components, which is especially useful for users who want to build exactly the system they want.Compatibility and expansionThe Darkflash DS900 is compatible with a wide range of motherboards, including ATX, M-ATX and ITX, giving users freedom of choice and flexibility in configuring their systems. Additionally, seven PCI slots allow for further expansion and customization of the chassis.IncludedHousing120 mm Fan DM12F x 7ManufacturerDarkflashModelDS900ColorWhiteDimensions434 x 218 x 454 mmMaterial0.5 mm SPCCCompatible motherboardsATX/M-ATX/ITXHDD/SDD2/2Number of additional slots7Maximum VGA length425 mmMaximum CPU height170 mmPower supplyATX at the bottomHeatsink systemSide: 120 mm x 3; Rear: 120 mm x 1; Top: 120 mm x3/140 mm x 2; PSU: 120 mm x 2; HDD: 120 mm x 1.Front panelTempered glassLeft panelTempered glassI/OUSB 3.0 x 1/ USB 2.0 x 1/ LED/Power/Reset/HD Audio switch
Nanoxia DS-9ARGB-W. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Understøttede diametre for frontventilatorer: 120,140 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 3.5", SSD-formfaktor: 2.5". Bredde: 215 mm, Dybde: 460 mm, Højde: 455 mm
Tootekood: P30 AIR WhiteGTIN: 8809213764059Korpused
Zalman P30 Air micro-ATX case with tempered glass and mesh front - white The Zalman P30 Air micro-ATX case in elegant white combines excellent cooling performance with a modern design. The mesh front ensures maximum air circulation, while the tempered glass side panel allows a clear view of the hardware inside. Perfect for PC enthusiasts who prefer a stylish and functional setup. Key features of the Zalman P30 Air case in white: Tempered Glass Side Panel : Presents the components in an attractive manner and gives the setup a high-quality look. Air-permeable mesh front : Optimizes cooling and ensures a constant air supply to the most important components. Compact micro-ATX design : Suitable for micro-ATX and mini-ITX motherboards, making it ideal for space-saving, high-performance builds. Modern white finish : Makes a stylish statement and goes great with minimalist or bright setups. The Zalman P30 Air case in white is the optimal choice for anyone who wants to build a powerful and well-cooled PC system in a compact, aesthetic case. The combination of mesh front and panoramic view through the tempered glass makes it the perfect choice for creative and performance-oriented builds.
Das AeroCool D301A Mini-Tower-Gehäuse kombiniert ein trendiges Mesh-Design mit Holzakzenten an der Front mit einer robusten SPCC-Konstruktion für Langlebigkeit. Es unterstützt ASUS- und MSI-m-ATX-Motherboards mit rückwärts gerichteten Anschlüssen, Flüssigkeitskühler bis zu 360 mm und GPUs bis zu 410 mm und bietet so ein leistungsstarkes PC-Baupotenzial in kompakter Form. Mit 11 Lüftersteckplätzen für optimale Kühlung, vielseitigen Speicheroptionen und praktischen E/A-Anschlüssen, einschließlich USB Typ C und USB3.0, ist dieses Gehäuse auf Leistung und Benutzerfreundlichkeit ausgelegt.
Toetatud emaplaadid: ATX, EATX, micro ATX, Mini-ITX; Piisavalt ruumi tõhusaks jahutamiseks; Optimeeritud õhuringlus; USB-pordid: 2x USB 3.2 Type-A, 1x USB 3.2 Gen 2x2 Type-C
With the Lian Li O11 Dynamic Mini V2 Flow, you can make your gaming setup a real eye-catcher: Despite its compact design, this mini case offers a spacious interior with enough room to make your visions a reality. Whether you prefer air cooling, water cooling with an AiO, or vertical installation of your graphics card, this case allows all that and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior for installing powerful hardware Clean cable management: Cable holders and support for motherboards with back-connect design for tidy routing Includes GPU brackets: Allows you to install your graphics card both vertically and horizontally Dust protection: Easy-to-clean dust filters at multiple locations Five pre-installed fans: Three 120 mm fans at the bottom and two 120 mm fans on the side with reverse blades The Lian Li O11 Dynamic Mini V2 Flow: Mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 Flow with sample hardware Equipped with tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 Flow allows you to showcase your hardware. Thanks to its compact size, it fits easily on your desk and instantly becomes the centerpiece of your gaming setup—without annoying cable clutter inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable holders, the case allows you to route cables cleanly. An integrated holder for the heavy 24-pin ATX cable ensures it stays neat and secure, while cleverly positioned straps keep all other cables bundled together. The drive cages can also be used to hide your cables. This makes cable management effortless—whether you're a beginner building your first gaming PC or a pro who doesn’t want to spend hours organizing cables. Flexible installation for motherboards and AiO water coolers With a vertically adjustable motherboard standoff, the case gives you more flexibility for installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The upper position allows you to mount 240 mm and 360 mm AiO coolers, while the lower position supports a 280 mm radiator as well. Well cooled even under full load Up to nine fans possible Space for two water cooling radiators Mesh panel on the top Dust filter on the bottom The fans and radiators ensure adequate cooling for your gaming hardware, even under full load. A mesh panel and dust filter help reduce dust buildup inside the case, extending the life of your hardware. Lian Li O11D Mini V2 Flow fans The Flow version of the O11D Mini V2 comes with five fans pre-installed. These 120 mm fans are equipped with reverse blades: so you always have a clean look without sacrificing precious airflow. Ready for top performance with space for large GPUs The case interior is designed so that even large graphics cards up to 400 mm fit comfortably—whether installed horizontally or vertically. The included GPU brackets ensure a secure hold in both scenarios. This gives you the freedom to choose your preferred GPU installation. Supports motherboards with Mini-ITX, mATX, and ATX form factors—including models with rear cable management (back-connect design). Combined with thoughtful cable holders and Velcro straps, this results in a tidy, clean look: All connectors are neatly concealed behind the motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O Panel The I/O panel module can be mounted both on top of the case and at the front bottom. This allows you to position the case exactly as you like while always having easy access to the power button and ports. If you mount the panel on top, the bottom cover is also removable—improving airflow.
Zalman P60 BLACK Der Zalman P60 black st ein stilvoller ATX-Mid-Tower, der modernes Design mit leistungsfähiger Kühlung kombiniert. Das schwarze Gehäuse mit großflächiger, duchgehend gebogener Glasseitenwand und fünf vorinstallierten ARGB-Lüftern bietet es sowohl Ästhetik als auch Funktionalität – ideal für Gamer, Content-Creator und PC-Enthusiasten, die Wert auf Optik und Performance legen. Die Easy-Release-Laschen an der gehärteten Glasscheibe ermöglichen eine einfache Montage, ohne dass neue Fingerabdrücke auf dem Glas hinterlassen werden! Hauptmerkmale Moderne ATX/Micro-ATX/Mini-ITX-Kompatibilität – das Gehäuse unterstützt alle gängigen Mainboard-Formate. Elegantes schwarzes Finish mit gehärtetem Glas auf der linken Seite und teilweise frontseitiger Glasoptik – perfekt zur Präsentation der Komponenten. 5 ARGB-Lüfter (3 seitlich, 2 hinten) bereits vorinstalliert – sorgt für hervorragende Frischluftzufuhr und effektiven Luftaustausch. Großzügige Kühl- und Erweiterungsmöglichkeiten: maximale Grafikkartenlänge bis ca. 435 mm, CPU-Kühlerhöhe bis ca. 170 mm, Netzteil bis ca. 180 mm Länge. Vielseitige Radiator- und Lüfteroptionen: z. B. Top: 120mm/140mm/240mm/280mm/360 mm; Bottom: bis 360mm möglich – somit auch Wasserkühlungen realisierbar. Front-I/O mit USB Typ-C, zwei USB 3.0 Anschlüssen sowie Audio- und Reset-/LED-Kontrollen – für moderne Peripherie. Mesh-Design an Top, Seiten und Unterseite für verbesserte Luftzirkulation und geringere Temperaturen. Der P60BLACK überzeugt auf mehreren Ebenen: Design & Ästhetik: Die schwarze Lackierung kombiniert mit einer großflächigen Glas-Seitenwand setzt Ihre Hardware in Szene. Das klare, kantige Design verleiht dem Gehäuse eine moderne Optik. Kühlleistung: Dank fünf vorinstallierter ARGB-Lüfter beginnt die Luftzirkulation von der Seite (3 x Seitenansaugung) und endet hinten (2 x Ausblasung) – so wird ein durchgängiger Luftstrom erzeugt. Optional lassen sich oben und unten weitere Radiatoren oder Lüfter montieren. Komponentenfreundlichkeit: Mit einer maximalen Grafikkartenlänge von etwa 435 mm und einer CPU-Kühlerhöhe von bis zu rund 170 mm haben Sie genügend Freiheit für leistungsstarke Komponenten. Modernes Front-Panel: USB Typ-C, USB 3.0, Audioanschluss sowie LEDs lassen keine Wünsche offen – ideal, wenn Sie z. B. externe SSDs oder moderne Headsets anschließen möchten. Flexibilität: Ob schlanke Arbeitsmaschine, leistungsfähiger Gaming-PC oder kompakte Content-Creator-Workstation – die Unterstützung von ATX, mATX und Mini-ITX macht den P60 vielseitig einsetzbar. Einfache Montage: Die durchdachte Innenraumstruktur, inkl. grober Kabelführung und großen Öffnungen, erleichtert den Einbau – auch für weniger erfahrene Nutzer.
Professional gaming PC case NOCTIS GLASS RGB X1 NOCTIS GLASS RGB X1 a case that combines gaming style with stable performance NOCTIS GLASS RGB X1 is a case designed for gamers who value not only high functionality but also impressive, modern aesthetics.The front panel made entirely of tempered glass highlights the RGB (Red Green Blue) lighting of the fans and creates a minimalist, clean design. Four RGB fans included full 4-pin PWM control The set includes four 120 mm RGB (Red Green Blue) fans they not only look modern but are also highly functional.Thanks to 4-pin PWM (automatic speed control), the system increases fan speed exactly when your processor or graphics card starts working harder. Enhanced AIO cooling system installation wide compatibility In NOCTIS GLASS RGB X1 you have complete freedom to install AIO (All in One) water cooling: on the top, front, rear, and most importantly in the dedicated zone next to the motherboard.This allows you to prepare a setup that best suits your graphics card, processor, and gaming style. NOCTIS GLASS RGB X1 offers extended radiator installation options, including space next to the motherboard. Supported configurations: top: 120 / 240 mm front: 120 / 240 / 280 / 360 mm next to the motherboard: 120 / 240 mm rear: 120 mm This flexible solution lets you tailor the cooling system to your specific hardware configuration. Compatibility with large components no upgrade limitations The case supports CPU coolers up to 170 mm, graphics cards up to 350 mm, and power supplies up to 180 mm (or 230 mm after removing the HDD cage).This means you can choose exactly the GPU and cooling system that delivers the best performance without worrying about fitting issues. Optimized airflow layout up to 10 fans NOCTIS GLASS RGB X1 allows you to configure cooling that fits your style of gameplay: maximum airflow maximum silence perfectly balanced operation With up to 10 fan mounting spots, you have full control over your temperature management. Available positions: 3 × front 2 × top 1 × rear 2 × next to the motherboard 2 × in the PSU chamber This layout makes it easy to achieve the perfect balance between cooling efficiency and acoustic comfort. Compatibility with ATX / mATX / Mini-ITX motherboards The case supports three popular motherboard formats: ATX (Advanced Technology eXtended) full-size, most expandable mATX (Micro ATX) compact but still highly functional Mini-ITX smallest, ideal for compact gaming builds Flexible drive system configuration tailored to the user Adapt your storage configuration to your game library and workflow: more SSDs faster load times and system responsiveness more HDDs more space for projects, recordings, or streaming archives The choice is yours the case supports both setups. NOCTIS GLASS RGB allows installing: 2 × HDD 3.5 + 2 × SSD 2.5or 1 × HDD 3.5 + 3 × SSD 2.5 A practical solution to expand storage for games, video materials, or fast system drives. Case protected with filters and designed for clean airflow The case maintains high airflow while protecting components with two dust filters (top + bottom), helping extend the lifespan of your hardware. The tempered-glass front panel is complemented by additional dust filters: top PSU chamber As a result, the inside of your PC stays clean, and components run longer and more reliably. Ergonomic I/O panel quick access to essential ports The top panel includes: USB-A 3.1 Gen 1 2 × USB-A 2.0 HD Audio The ports are easily accessible, making it convenient to connect USB drives, accessories, or headphones without reaching behind the computer.
