Elegant midi-tower by ASUS in white, side panel made of tempered glass, removable top, 4x 140-mm fans with ARGB pre-installed, space for 1x 280/360-mm radiator, graphics cards up to 407 mm, 2x USB 3.2 Gen1 / 1x USB 3.2 Gen2x2 Type-C
Evolv X2 Redefine the desktop computer The Evolv X2 redefines the desktop computer with its see-through glass design, aluminum interior, and powerful vertical cooling solution. The entire chassis floats above its base, drawing in surrounding air and channeling it efficiently through the GPU and CPU. Hot air is expelled through the top ventilation, enhancing thermal performance. The interior of the Evolv X2 has been carefully designed to blend with the hardware components for a fully integrated look, with all cooling components sitting flush into the top and base. The integrated lighting and high-quality aluminum internal panels add flair to your system.
Black case with a closed side Efficient cooling with up to seven fans and a radiator up to 360mm Support for large motherboards up to E-ATX and back-connect Space for graphics cards up to 415mm and CPU coolers with a height of up to 184mm Up to six drives possible Three M25-120mm fans already included PHANTEKS XT Silent: Compact and simple midi-tower The PHANTEKS XT Silent fits into any setup with its simple black design. It offers extensive options for installing your high-end hardware. To keep your system cool even at full power, there is plenty of space for fans and radiators. Effectively cooled with fans and radiators To ensure your high-end components do not overheat even under full load, up to seven fans can be installed in the midi-tower. The top supports either up to three 120mm or two 140mm fans. Additionally, three more 120mm fans can be installed on the mid-plate. The rear also allows for a 120mm or 140mm fan. Furthermore, three PHANTEKS M25-120mm fans are already included in the package. If you prefer water cooling - whether an all-in-one water cooling system or a custom-built water cooling solution - there are two locations to install a radiator. A maximum 360mm radiator can be mounted at the top, and another 120mm radiator at the rear. With these fan and radiator options, your system will not lose performance. Hardware installation The midi-tower supports the installation of large graphics cards up to 415mm in size. Consequently, the current NVIDIA GPUs of the 40 series are also possible. Motherboards up to E-ATX format can be accommodated. To avoid messy cable clutter, you can also install motherboards with back-connect. The CPU cooler should not exceed a height of 184mm. On the other hand, there are hardly any limits for the power supply, as it can be up to 270mm long. To store programs and games, up to six drives can be installed: up to three 2.5-inch SSDs can be placed on the side, two more in the power supply chamber, as well as one 3.5-inch drive.
Obudowa do konstruowania wydajnych komputerów mid tower iCUE LINK 5000T LX RGB Przyciągnij uwagę za pomocą wyjątkowej profilowanej konstrukcji obudowy CORSAIR 5000T LX RGB, w której możesz zbudować idealny system oparty na płycie głównej z odwróconymi złączami. Elegancka stalowa obudowa o wyjątkowym kształcie 3 wentylatory LX120 RGB i koncentrator systemowy iCUE LINK w komplecie Zintegrowane taśmy świetlne RGB Aurora zapewniające rozproszone oświetlenie Działa z płytami głównymi z odwróconymi złączami Zdejmowane panele przedni i górny z siateczki umożliwiające intensywny obieg powietrza Mieści do 10 wentylatorów 120 mm lub 4 wentylatorów 140 mm oraz kilka radiatorów 360 mm System organizacji okablowania RapidRoute EFEKTOWNE LINIETa elegancka obudowa o wyjątkowym kształcie z taśmami świetlnymi iCUE LINK Aurora i wentylatorami iCUE LINK LX120 RGB zapewnia wyraziste i dynamiczne podświetlenie pozwalające podziwiać jej uderzające piękno. OGROMNY POTENCJAŁ CHŁODZENIAPrzestronne wnętrze pomieści nawet 10 wentylatorów 120 mm albo 4 wentylatory 140 mm, a także kilka radiatorów o wysokości 60 mm, w tym z przodu lub boku - o rozmiarze 360 mm oraz w górnej części - o rozmiarze 360 mm w konfiguracji push/pull. PEŁNA FUNKCJONALNOŚĆTa obudowa ma wszystko, czego potrzeba do budowy bardzo wydajnego komputera. ZDEJMOWANE PANELE PRZEDNI I GÓRNYSiateczkowe panele o wyjątkowej konstrukcji, które można łatwo zdjąć, aby dostać się do środka, umożliwiają intensywny przepływ powietrza. DWA OBSŁUGIWANE BEZNARZĘDZIOWO PANELE BOCZNE NA ZAWIASACHŁatwy dostęp do systemu dzięki panelom na zawiasach: jednemu ze szkła hartowanego, eksponującemu wszystkie komponenty, oraz jednemu ze stali z drugiej strony. SYSTEM PROWADZENIA PRZEWODÓW CORSAIR RAPIDROUTEUmożliwia szybkie i łatwe poprowadzenie przewodów przez obszerny 46-milimetrowy ukryty kanał pod płytą główną. OBSŁUGA PŁYT GŁÓWNYCH Z ODWROTNYMI ZŁĄCZAMISprawdzona pod kątem zgodności z płytami głównymi ASUS BTF, MSI Project Zero oraz Gigabyte Project Stealth, które mają złącza z tyłu, dzięki czemu nie psują widoku przez podłączone kable. PROSTA KONSTRUKCJANowoczesna konstrukcja w popularnym formacie obudowy komputerowej 5000T ma wygodne rozwiązania, które ułatwią Ci pracę. PUDEŁKO NA ŚRUBY WIELOKROTNEGO UŻYTKUDzięki dodanemu w zestawie pudełku, w którym wszystkie potrzebne Ci śruby będą bezpiecznie zamknięte, nie zgubisz już żadnej ważnej śrubki. PRZELOTKI FORMOWANE W DWÓCH CYKLACHDzięki miękkim, gumowym przelotkom wewnętrznym umożliwiającym łatwe przeciąganie kabli oraz twardym gumowym przelotkom zewnętrznym, które pewnie trzymają się na miejscu, możesz uniknąć frustracji podczas instalowania przewodów. ŚRUBY QUICKTURN DO WENTYLATORÓWŚruby do wentylatorów CORSAIR QuikTurn są równie wytrzymałe i bezpieczne jak tradycyjne śruby, dzięki czemu montaż wentylatorów w systemie staje się niezwykle prosty. Przydaje się to, gdy wypełniasz obudowę tej wielkości. WIELE MOŻLIWOŚCI CHŁODZENIAStwórz odpowiedni do swoich potrzeb system chłodzenia dzięki miejscu na 10 wentylatorów 120 mm oraz różnorodnym opcjom montażu dwóch radiatorów o maksymalnym rozmiarze 360 mm. NOWOCZESNY PANEL WEJŚĆ/WYJŚĆ Z PRZODUUmożliwia łatwy dostęp do nowoczesnych złączy, w tym do portu USB 3.2 Gen 2 Type-C, 4 portów USB 3.2 Gen 1 Type-A oraz zintegrowanego gniazda audio i mikrofonowego typu jack.
The ASUS ProArt PA401 mid-tower chassis presents a unique wood edition design that combines aesthetics with functionality. With a robust open frame design and a windowed side panel made from tempered glass, this chassis allows for a clear view of the internal components while maintaining airflow. Equipped with integrated cable management, this chassis provides a clean and organized build space, making installation and maintenance straightforward.This chassis boasts numerous features that enhance performance and usability. It includes multiple dust filters to keep the interior clean, a PWM controller for efficient cooling, and ample space for expansion with 4 internal bays and 7 expansion slots. Supporting a variety of radiator sizes and up to 2 x 140 mm fans, the cooling system maintains optimal temperatures while ensuring quiet operation. Additionally, front panel connectors include USB and audio ports for easy access to peripherals.
The Montech X5 is a mid-tower case that combines elegant design with solid cooling performance. With a sleek front panel, tempered glass side window, and pre-installed fans, it's the ideal choice for budget-conscious PC setups. Modern mesh front panel with a clean, minimalist look Three 140mm and one 120mm fans pre-installed for instant cooling Tempered glass side window for an unobstructed view of the interior Compatible with E-ATX motherboards and GPUs up to 410 mm in length Spacious interior with tidy cable management Elegant design for any setup Enjoy high compatibility in a compact build with the Montech X5 Mid-Tower. It accommodates large GPUs, powerful cooling systems, and modern cable management—without appearing bulky. The X5 uses a simple front panel without mesh, delivering a clean overall appearance. It's especially suitable for users who value a clear, minimalist look. This case combines performance with style—the RGB lighting delivers an impressive appearance and enhances your entire setup. Whether for a gaming rig or workstation, customizable effects make your PC a real eye-catcher. Solid cooling performance with four fans Keep your components at optimal temperature with the Montech X5, the perfect choice for those who prioritize high-performance cooling. Its airflow-friendly design and optimized airflow architecture ensure ideal cooling, even during long gaming sessions or heavy system loads—a case that perfectly combines performance and cooling. Despite the closed front, four 120mm fans are already installed, providing good basic cooling right out of the box. This means you're ready to go without additional investment. Thanks to the removable dust filters, your case stays free from dust build-up. The filters are easy to clean, so your computer remains optimally cooled at all times. Easy assembly & flexible hardware support The interior offers space for standard ATX motherboards, long graphics cards, and multiple drives. Thanks to its thoughtful structure, installation is quick and straightforward, even for beginners.
ASUS ROG Strix Helios II. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Frontventiler installeret: 3x 140 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 250 mm, Dybde: 565 mm, Højde: 591 mm
PMC-SE2Gaming Mini TowerDiscover the perfect balance between design and functionality with the MicroArtx MC-SE2. Featuring continuous, frameless tempered glass panels on the front and sides, this computer case transforms your workstation into a stylish display of your hardware. A 120mm FRGB rear fan, dual-chamber design with support for liquid cooling kits, and an optimized Airflow Mesh ventilation system ensure exceptional thermal efficiency during gaming sessions.
Das MasterFrame 600 Mesh ist ein hochwertiges Midi-Tower-Gehäuse mit offenem Rahmen für leistungsstarke Hardware, extreme Kühlung und umfassende Anpassungsmöglichkeiten. Es wurde mit Blick auf FreeForm 2.0 entwickelt, unterstützt ATX- bis E-ATX-Motherboards und bietet vollen Zugriff auf modulare Designdateien, sodass Benutzer unbegrenzt bauen und weiterentwickeln können. Das Gehäuse verfügt Platz für bis zu zehn Lüfter und mehrere Radiatorgrößen (bis zu 420 mm) und bietet so eine überragende Wärmeleistung. Die mitgelieferte GPU-Halterung verhindert ein Durchhängen der GPU und sorgt für Stabilität bei intensiven Spielen oder Hochleistungs-Workloads, wodurch eine saubere und sichere Konstruktion geboten wird.
Das MasterFrame 500 Mesh ist ein hochwertiges Midi-Tower-Gehäuse mit offenem Rahmen für leistungsstarke Komponenten, fortschrittliche Kühlung und grenzenlose Anpassungsmöglichkeiten. Es basiert auf der FreeForm 2.0-Designphilosophie, unterstützt ATX- bis E-ATX-Motherboards und bietet vollen Zugriff auf modulare Designdateien. Dank verbesserter Mesh-Panels für eine verbesserte Luftzirkulation können PC-Builder, Modder und Entwickler die Grenzen des PC-Designs erweitern. Das Gehäuse verfügt Platz für bis zu acht Lüfter und mehrere Radiatorgrößen (bis zu 360 mm) und bietet so eine überragende Wärmeleistung. Die mitgelieferte GPU-Halterung verhindert ein Durchhängen der GPU und sorgt für Stabilität bei intensiven Spielen oder Hochleistungs-Workloads, wodurch eine saubere und sichere Konstruktion geboten wird.
Das MasterFrame 600 Mesh ist ein hochwertiges Midi-Tower-Gehäuse mit offenem Rahmen für leistungsstarke Hardware, extreme Kühlung und umfassende Anpassungsmöglichkeiten. Es wurde mit Blick auf FreeForm 2.0 entwickelt, unterstützt ATX- bis E-ATX-Motherboards und bietet vollen Zugriff auf modulare Designdateien, sodass Benutzer unbegrenzt bauen und weiterentwickeln können. Das Gehäuse verfügt Platz für bis zu zehn Lüfter und mehrere Radiatorgrößen (bis zu 420 mm) und bietet so eine überragende Wärmeleistung. Die mitgelieferte GPU-Halterung verhindert ein Durchhängen der GPU und sorgt für Stabilität bei intensiven Spielen oder Hochleistungs-Workloads, wodurch eine saubere und sichere Konstruktion geboten wird.
ENDORFY Fishtank 6000 Corona is a showcase PC case that provides a panoramic view of your PC. Two glass panes and the elegant, slim design showcase your components particularly effectively. The very good compatibility - also for motherboards with rear connectors and in SSI-CEB format (E-ATX) as well as support for up to two 360 mm radiators - makes it a solid basis for a high-end PC. On the Fishtank 6000 Corona, the I/O panel is located in the lower area of ??the side wall and remains easily accessible at all times when the housing is on the desk - regardless of the orientation. To There is one USB-C 3.2 Gen 2 port (up to 10 Gbps), two USB-A 3.2 Gen 1 ports (up to 5 Gbps) and a combination audio port for headphones and microphone. The Fishtank 6000 Corona offers versatile options for configuring the cooling system - for both air and water cooling. Large radiators measuring 360 mm or 240 mm can be installed at the top, while 360 ??mm or 280 mm are also possible on the side. In addition, CPU air coolers with a height of up to 182 mm are supported and up to 9 × 120 mm or 7 × 140 mm fans can be installed. This component compatibility gives you flexibility when putting together a powerful system. The large internal volume, comparable to the Arx 700 series, offers space for powerful components - including graphics cards with a length of up to 445 mm and up to 7 expansion cards. There is space inside for a maximum of 3 data carriers (1× 2.5", 1× 3.5" and 1× 2.5"/3.5"). Mounting radiators and fans is made easier with an additional side bracket that allows components to be secured before installation into the case. Easily removable panels as well as magnetic filters on the top and side walls and a bottom filter that can be pulled out from both sides make this easier Cleaning. Fishtank 6000 Corona is equipped with four pre-installed ENDORFY Corona 120 fans - three reverse on the side and one standard fan on the back. The double-sided ARGB ring provides impressive lighting from every angle, while the speed range of 200-1600 rpm, the precise PWM control and the FDB bearing ensure smooth running (especially in semi-passive operation), durability and good airflow. The fans are already connected to a PWM splitter with an ARGB controller (5 connections each), which allows both control via the mainboard and autonomous operation with predefined lighting effects. Tower case type Color black EAN 5903018669434 Manufacturer no. EY2A025 Fishtank 6000 series Midi tower design Mainboard form factor E-ATX, SSI-CEB Material steel, tempered glass Window Kit Yes Internal dimensions plug-in card length maximum 445 mm Internal dimensions CPU cooler height maximum 182 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 250 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 7 pieces Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2 (10 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. Rear 1 x 120 mm Corona fan pre-installed (200-1600 rpm) Notes Dust filter: Side, top, and bottom, Convenient cable management, Side: 3 x 120 mm Corona reverse fans pre-installed (200-1600 rpm) Lighting Yes, RGB RGB connectors addressable RGB header Water cooling possible Yes Water cooling possible. Supported radiators: side: 120/140/240/280/360 mm, top: 120/240/360 mm, back: 120/140 mm. Rear connection of the motherboard Yes Feature Slim “aquarium” style chassis, support for vertical GPU mounting Note (E-ATX up to 280 mm width) Accessories available 3× Pre-installed ENDORFY Corona 120 reverse fan, 1× Pre-installed ENDORFY Corona 120 fan, 1× Pre-installed PWM splitter with ARGB controller, 1× Mounting set, 1× Cable tie set, 1× Velcro set for cables, 2× Replacement clips for the side panel, 1× Microfiber cloth, 1× Instructions Volume 55 l Dimensions Width: 24 cm x Height: 47.3 cm x Depth/Length: 48.7 cm Weight 9.1kg
The Define One by Fractal Design is a PC case with a closed front panel that combines clear Scandinavian design with effective sound insulation. It features aluminum side air intakes, subtle curves, and high-quality details for a refined look that delivers timeless and functional design. It supports modern high-end components and comes with three powerful Momentum fans at the front. It offers space for graphics cards up to 368 mm long, supports radiators up to 360 mm at the front and 280 mm on the top, and is compatible with motherboards with rear-mounted connections. Thanks to removable brackets and sophisticated cable routing, the Define One provides a smooth and intuitive building experience. Even powerful gaming systems have plenty of room here and stay quiet under load thanks to the integrated sound insulation. The integrated front air guide directs cool air directly to the graphics card.TypeTower caseColorwhiteEAN7340172713401Manufacturer No.FD-C-DEFOA-03SeriesDefine OneForm factorMid TowerMotherboard form factorE-ATXMaterialSteel, aluminumWindow KitYesInternal dimensions (expansion card length)up to 368 mmInternal dimensions (CPU cooler height)up to 171 mmInternal dimensions (PSU form factor)ATXInternal dimensions (PSU length)up to 180 mmInternal drive bays 3.5 inch2 piecesInternal drive bays 2.5 inch2 piecesInternal drive bays 2.5 inch (2.5 in 3.5 inch bays)2 piecesFull-size slots7 piecesFront ports1x Audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s)Front portsThe USB 3.2 Gen 1 designation corresponds to the former name USB 3.1 Gen 1 / USB 3.0.Front portsThe USB 3.2 Gen 2 designation corresponds to the former name USB 3.1 Gen 2 / USB 3.1.FrontIncludes 3x Momentum 140 mm PWM fans; alternatively, 3x 120 mm fans can be installedRear1x 120 mm can be installedNotesDust filters: front, PSU; sound-damping material on the right side panelWater cooling possibleYesWater cooling possible (supported radiators)Front: up to 360 mm, Top: up to 280 mm, Rear: 120 mmRear-mounted motherboard connectionYesSound-damped caseYesAdditional informationMaximum graphics card lengths: 368 mm with the built-in front fan, 338 mm when installing a 30 mm thick radiator | E-ATX format supported up to a size of 277 mm | A motherboard with rear-mounted connections is supported up to the ATX formatVolume57 lDimensionsWidth: 23.5 cm x Height: 50 cm x Depth/Length: 48.2 cmWeight11.1 kg
The Define One by Fractal Design is a PC case with a closed front panel that combines clear Scandinavian design with effective sound insulation. It features side air intakes made of aluminum, subtle curves, and high-quality details for a refined look that delivers timeless and functional design. It supports modern high-end components and comes with three powerful Momentum fans at the front. It offers space for graphics cards up to 368 mm in length, supports radiators up to 360 mm at the front and 280 mm at the top, and is compatible with motherboards with rear-mounted connectors. Thanks to removable brackets and a sophisticated cable routing system, the Define One provides a smooth and intuitive building experience. Powerful gaming systems also have plenty of room here and stay quiet even under load thanks to the integrated sound insulation. The integrated front airflow directs cool air directly to the graphics card.TypeTower caseColorwhiteEAN7340172714736Manufacturer No.FD-C-DEFOA-04SeriesDefine OneForm factorMid-TowerMotherboard Form FactorE-ATXMaterialSteel, aluminumInternal dimensions (graphics card length)up to 368 mmInternal dimensions (CPU cooler height)up to 171 mmInternal dimensions (PSU form factor)ATXInternal dimensions (PSU length)up to 180 mmDrive bays 3.5-inch internal2 piecesDrive bays 2.5-inch internal2 piecesDrive bays 2.5-inch (2.5 in 3.5-inch) internal2 piecesFull-size slots7 piecesFront ports1x Audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s)Front portsThe label USB 3.2 Gen 1 corresponds to the previous label USB 3.1 Gen 1 / USB 3.0.Front portsThe label USB 3.2 Gen 2 corresponds to the previous label USB 3.1 Gen 2 / USB 3.1.FrontIncludes 3x Momentum 140 mm PWM fans; alternatively, 3x 120 mm fans can be installedRear1x 120 mm can be installedNotesDust filters: front, PSU; sound-damping materials on the side panelsWater cooling possibleYesWater cooling possible (supported radiators)Front: up to 360 mm, Top: up to 280 mm, Rear: 120 mmRear-mounted motherboard connectorsYesSound-dampened caseYesFurther informationMaximum graphics card lengths: 368 mm with the built-in front fan, 338 mm when installing a 30 mm-thick radiator | E-ATX format supported up to a size of 277 mm | A motherboard with rear-mounted connectors can be installed up to the ATX formatVolume57 lDimensionsWidth: 23.5 cm x Height: 50 cm x Depth/Length: 48.2 cmWeight11.3 kg
The Summit PC case by Fractal Design combines expressive Scandinavian design with strong gaming performance. It features curved wood details, matching solid wood feet, and refined details for a distinctive look inspired by Scandinavian furniture. The Summit was designed for modern high-end components and comes with three Momentum 140 mm fans pre-installed in the front, support for graphics cards up to 425 mm long, radiator support up to 360 mm at the front and top, and compatibility with motherboards with rear connections. A modern interior with removable brackets and integrated cable routing ensures smooth installation and a clean, tidy result.TypeTower caseColorwhite/woodEAN7340172712695Manufacturer No.FD-C-SUM1A-02SeriesSummitForm factorMid-TowerMainboard form factorE-ATXMaterialSteelWindow KitYesInternal dimensions for expansion card lengthup to 425 mmInternal dimensions for CPU cooler heightup to 173 mmInternal dimensions for PSU form factorATXInternal dimensions for PSU lengthup to 253 mmInternal drive bays 3.5 inch2 piecesInternal drive bays 2.5 inch2 piecesInternal drive bays 2.5 inch (2.5 in 3.5 inch bays)2 piecesFull-size slots7 piecesFront ports1x Audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s)Front portsThe USB 3.2 Gen 1 label corresponds to the previous naming USB 3.1 Gen 1 / USB 3.0.Front portsThe USB 3.2 Gen 2 label corresponds to the previous naming USB 3.1 Gen 2 / USB 3.1.Front3x Momentum 140 mm PWM fans included; alternatively, 3x 120 mm fans can be installedRear1x 120 mm fan mountableNotesDust filter: PSULiquid cooling possibleYesLiquid cooling possible Supported radiatorsFront: up to 280/360 mm, Top: up to 280/360 mm, Rear: 120 mmRear connection of the mainboardYesFurther informationMaximum expansion card lengths: 425 mm with the built-in front fan, 393 mm when installing a 30 mm thick radiator | E-ATX format supported up to a size of 277 mm | A mainboard with rear connections can be installed up to the ATX formatVolume58 lDimensionsWidth: 22.9 cm x Height: 51.5 cm x Depth/Length: 49.5 cmWeight10.1 kg
The Summit PC case by Fractal Design combines expressive Scandinavian design with strong gaming performance. It features curved wood details, matching solid-wood feet, and refined accents for a distinctive look inspired by Scandinavian furniture. The Summit has been developed for modern high-end components and comes with three Momentum 140 mm fans pre-installed in the front. It supports graphics cards up to 425 mm in length, radiator support up to 360 mm at the front and top, and compatibility with motherboards with rear connectors. A modern interior with removable brackets and integrated cable routing ensures a smooth build process and a clean, tidy result.TypeTower caseColorblack/woodEAN7340172712718Manufacturer No.FD-C-SUM1A-04SeriesSummitForm factorMidi-TowerMotherboard form factorE-ATXMaterialSteelWindow KitYesInternal dimensions (expansion card length)up to 425 mmInternal dimensions (CPU cooler height)up to 173 mmInternal dimensions (PSU form factor)ATXInternal dimensions (PSU length)up to 253 mmDrive bays 3.5-inch internal2 pcsDrive bays 2.5-inch internal2 pcsDrive bays 2.5-inch (2.5 in 3.5-inch) internal2 pcsFull-size slots7 pcsFront ports1x Audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s)Front portsThe label USB 3.2 Gen 1 corresponds to the previous label USB 3.1 Gen 1 / USB 3.0.Front portsThe label USB 3.2 Gen 2 corresponds to the previous label USB 3.1 Gen 2 / USB 3.1.Front3x Momentum 140 mm PWM fans included; alternatively 3x 120 mm fans can be installedRear1x 120 mm fan mountNotesDust filters: PSUWater cooling possibleYesWater cooling possible Supported radiatorsFront: up to 280/360 mm, Top: up to 280/360 mm, Rear: 120 mmRear connector for the motherboardYesAdditional informationMaximum expansion card lengths: 425 mm with the built-in front fan, 393 mm when installing a 30 mm thick radiator | E-ATX format supported up to a size of 277 mm | Installing a motherboard with rear connectors is possible up to the ATX formatVolume58 lDimensionsWidth: 22.9 cm x Height: 51.5 cm x Depth/Length: 49.5 cmWeight10.1 kg
The Summit PC case from Fractal Design combines striking Scandinavian design with strong gaming performance. It features curved wood details, matching solid wood feet, and refined accents for a distinctive look inspired by Scandinavian furniture. The Summit was designed for modern high-end components and comes with three Momentum 140 mm fans already installed in the front, supports graphics cards up to 425 mm in length, supports radiator sizes up to 360 mm at the front and top, and is compatible with motherboards with rear-side connections. A modern interior with removable brackets and integrated cable routing ensures a smooth build and a clean, tidy result. The Ambience version also offers customizable ARGB lighting on the front during operation.TypeTower caseColorblackEAN7340172712732Manufacturer No.FD-C-SUM1A-06SeriesSummitForm factorMid-TowerMotherboard form factorE-ATXMaterialSteelWindow KitYesInternal dimensions GPU lengthup to 425 mmInternal dimensions CPU cooler heightup to 173 mmInternal dimensions PSU form factorATXInternal dimensions PSU lengthup to 253 mmDrive bays 3.5-inch internal2 piecesDrive bays 2.5-inch internal2 piecesDrive bays 2.5-inch (2.5 in 3.5-inch) internal2 piecesFull-size slots7 piecesFront ports1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s)Front portsThe USB 3.2 Gen 1 designation corresponds to the previous name USB 3.1 Gen 1 / USB 3.0.Front portsThe USB 3.2 Gen 2 designation corresponds to the previous name USB 3.1 Gen 2 / USB 3.1.FrontIncludes 3x Momentum 140 mm PWM fans; alternatively, 3x 120 mm fans can be installedRear1x 120 mm fan can be installedNotesDust filters: PSULightingYes, RGBWater cooling possibleYesWater cooling possible Supported radiatorsFront: up to 280/360 mm, Top: up to 280/360 mm, Rear: 120 mmRear-side motherboard connectionYesAdditional informationMaximum graphics card lengths: 425 mm with the installed front fan, 393 mm when installing a 30 mm thick radiator | E-ATX format supported up to a size of 277 mm | Installation of a motherboard with rear-side connectors possible up to the ATX formatVolume58 lDimensionsWidth: 22.9 cm x Height: 51.5 cm x Depth/Length: 49.5 cmWeight10.1 kg
