With the D32 series, Jonsbo appeals to everyone who wants to build their system in a space-saving manner. The D32 STD PC case, compared to the D32 PRO, is aimed at the midrange and budget segments by focusing on key features such as back-connect support or minimal front I/O. Elegant and space-saving design for mATX motherboards Seamless cable management with cutouts for back-connect motherboards Mesh side panel provides a subtle appearance Plenty of room for cooling solutions allows the installation of high-performance hardware Dust filter protects your hardware from annoying dust particles The Jonsbo D32 STD Mesh: A space-saving and discreet case for a variety of hardware Whether it's a midrange HTPC or a high-end PC—you'll find a comfortable fit for all kinds of builds in the Jonsbo D32 STD Mesh. Despite its compact size, the case accommodates graphics cards up to 365 mm in length and CPU coolers up to 164 mm in height. This means that, even with the compact design, your hardware will be adequately cooled. Together with up to six 120 mm fans, or a combination of one 120 mm fan and four 140 mm fans, the case ensures exceptional airflow inside. No cable clutter with back-connect With back-connect motherboards like the BTF series from ASUS, the PROJECT ZERO series from MSI, or the Stealth series from GIGABYTE, the case remains virtually free from visible cable clutter, even in this small footprint. Since most power and connector cables can be attached to the back of the motherboard, you can skip elaborate cable management and still enjoy a clean look inside your case. Strong cooling in a small space To ensure your powerful hardware is properly cooled even in this compact case, Jonsbo has developed an optimal cooling solution for the space available. With six 120 mm fans for ample airflow, a large dual-tower CPU cooler, or even a 240 mm AiO cooler, your hardware will remain cool even under heavy load. The dust filter at the bottom and the mesh-design side panels make sure your hardware stays free from dust and dirt. As a result, your temperatures always remain at optimal levels and the lifespan of your components is extended.
• Central Floating Ventilation free-floating separation provides a unique visual identity. • True floating void adds an extra dimension of airflow across 270° of access. • 9.16-inch IPS TFT LCD panel delivers real-time readouts and customizable visuals in 1920×462 resolution at a 60Hz refresh rate, fully accessible from your desktop through control software. • The Aurora RGB lighting strip brings the awe and glory of RGB lighting to the free-floating space. • COUGAR Unity 240 single-frame PWM reverse-blade fans are preinstalled on the motherboard side. • Accommodates a maximum GPU length of 430mm. • Compatible with Reverse Connector / Mini ITX / Micro ATX / ATX / CEB motherboards. • USB 3.2 Gen 2×2 Type-C (20 Gbps) x1, USB 3.0 Type-A x 2, 4 pole headset audio jack for versatile device connectivity. • Houses 2 x 3.5” HDD drives and 2+2 2.5” SSD drives (converted from 3.5” drive bays)
The Jonsbo D31 MESH mATX case is a sleek and versatile option for building a powerful computer. Its front mesh design allows for optimal airflow and its tempered glass side panel adds a touch of elegance. The case can accommodate up to 8 fans and 3 radiators, and can fit GPUs up to 400mm in length. The versatile layout allows for a customizable and optimized use of space.
Koos keskselt paigutatud USB 3.0 Type A ja USB 3.0 Type C ühendustega, SDXC kaardilugeja ja heliühendustega on MW-02 II praktiline ja kaasaegne. Pesa õhukeste DVD-draivide jaoks täiendab seadmete valikut. Perforeeritud külgseinad ...
Darkflash M305 fanless computer case (White)Darkflash M305 is a meticulously designed Micro-ATX computer case that combines compact dimensions with functionality and futuristic design. It was created for users looking for good value for money, without compromising on airflow, hardware compatibility and aesthetics. A transparent side panel made of tempered glass allows you to effectively display your components, which is sure to be appreciated by fans of RGB backlighting (Red, Green, Blue, a backlighting system based on three colors: red, green and blue) or elegant kits. From now on, your gaming space will look classy and stylish!Practical solutions for everyday useThe case is equipped with a side panel made of tempered glass, fixed with convenient thumb screws. This gives you quick and easy access to the computer's interior, without the need to reach for tools. This solution works great for both hardware upgrades and regular cleaning of the cooling system. The front of the case has a modern, openwork panel with vents, which not only gives the whole case a dynamic character, but most importantly helps air circulation, protecting components from overheating.Efficient cooling systemDarkflash M305 offers a lot of freedom when planning cooling - you can fit as many as 7 120 mm fans inside. Such an arrangement allows you to build a very efficient air cooling system, which translates into stable operation of the processor, graphics card and other components, even during intensive gaming or work on graphics programs. The layout of the fans can be customized to ensure even airflow throughout the case.Compact format, big possibilitiesAlthough the case has small external dimensions (325 × 195 × 387 mm), its interior has been designed for maximum space utilization. It will easily accommodate a graphics card up to 300 mm in length and a CPU (Central Processing Unit, CPU) cooling system up to 160 mm in height. The case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, an ultra-compact motherboard format) motherboards, allowing you to choose the right configuration for both an office and gaming PC.Thoughtful interior and space for dataInside you'll find a specially designed mounting bracket that allows you to install two SSDs (Solid State Drive, solid state drive) and two traditional HDDs (Hard Disk Drive, hard drive). This arrangement gives you a lot of flexibility in scheduling your operating system, games and data storage. The entire interior has been designed with order in mind - cables can be routed aesthetically, which promotes both appearance and better cooling.Quick access to portsOn the top edge of the case is an intuitive panel of inputs and outputs, including an advanced USB 3.0 connector (Universal Serial Bus, a connector standard for powering and charging electronic devices, as well as for data transfer). It allows fast file transfer and convenient charging of mobile devices. The top location of the ports makes it convenient to use them no matter where the computer stands - on or under a desk.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305Housing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsRear: 120 mm x1; Top: 120 mm x2; Front: 120 mm x2; Bottom: 120 mm x2Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorWhiteHeight387 mmWidth195 mmDepth325 mm
Darkflash M305 fanless computer case (Black)Darkflash M305 is a meticulously designed Micro-ATX computer case that combines compact dimensions with functionality and futuristic design. It was created for users looking for good value for money, without compromising on airflow, hardware compatibility and aesthetics. A transparent side panel made of tempered glass allows you to effectively display your components, which is sure to be appreciated by fans of RGB backlighting (Red, Green, Blue, a backlighting system based on three colors: red, green and blue) or elegant kits. From now on, your gaming space will look classy and stylish!Practical solutions for everyday useThe case is equipped with a side panel made of tempered glass, fixed with convenient thumb screws. This gives you quick and easy access to the computer's interior, without the need to reach for tools. This solution works great for both hardware upgrades and regular cleaning of the cooling system. The front of the case has a modern, openwork panel with vents, which not only gives the whole case a dynamic character, but most importantly helps air circulation, protecting components from overheating.Efficient cooling systemDarkflash M305 offers a lot of freedom when planning cooling - you can fit as many as 7 120 mm fans inside. Such an arrangement allows you to build a very efficient air cooling system, which translates into stable operation of the processor, graphics card and other components, even during intensive gaming or work on graphics programs. The layout of the fans can be customized to ensure even airflow throughout the case.Compact format, big possibilitiesAlthough the case has small external dimensions (325 × 195 × 387 mm), its interior has been designed for maximum space utilization. It will easily accommodate a graphics card up to 300 mm in length and a CPU (Central Processing Unit, CPU) cooling system up to 160 mm in height. The case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, an ultra-compact motherboard format) motherboards, allowing you to choose the right configuration for both an office and gaming PC.Thoughtful interior and space for dataInside you'll find a specially designed mounting bracket that allows you to install two SSDs (Solid State Drive, solid state drive) and two traditional HDDs (Hard Disk Drive, hard drive). This arrangement gives you a lot of flexibility in scheduling your operating system, games and data storage. The entire interior has been designed with order in mind - cables can be routed aesthetically, which promotes both appearance and better cooling.Quick access to portsOn the top edge of the case is an intuitive panel of inputs and outputs, including an advanced USB 3.0 connector (Universal Serial Bus, a connector standard for powering and charging electronic devices, as well as for data transfer). It allows fast file transfer and convenient charging of mobile devices. The top location of the ports makes it convenient to use them no matter where the computer stands - on or under the desk.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305Housing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsRear: 120 mm x1; Top: 120 mm x2; Front: 120 mm x2; Bottom: 120 mm x2Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorBlackHeight387 mmWidth195 mmDepth325 mm
The Jonsplus BO400CG is a premium showcase case for enthusiasts who want to stylishly display their hardware. With a curved glass panel, modular design, and plenty of space for high-end components, it combines design, flexibility, and strong cooling performance. Curved glass showcase impressively highlights your hardware Supports ATX, Micro-ATX, and Mini-ITX motherboards for flexible builds Spacious interior for long GPUs and tall CPU coolers Modular covers allow for customized look and airflow adjustment Extensive fan and radiator options for powerful cooling Panoramic design with curved glass The BO400CG stands out from classic cases with its curved glass panel. The gently curved glass surface creates a continuous panoramic look without sharp edges, so your hardware is perfectly displayed from nearly any angle. Premium materials and clever modularity The sturdy aluminum frame not only gives the case an elegant appearance but also aids in heat dissipation. Tool-less removable side panels and interchangeable covers make assembly and later adjustments easy. Cable management solutions ensure a clean appearance. Plenty of space for high-end hardware and cooling With support for graphics cards up to 435 mm, CPU coolers up to 173 mm, and power supplies up to 200 mm, the BO400CG is suitable for even the most powerful systems. Up to ten 120 mm fans or several large radiators allow for effective air or water cooling, even under heavy load.
"Zalman T6 ATX Mid Tower PC korpus koos 120 mm ventilaatori ja ODD-ga on ideaalne valik mängijatele ja tehnikahuvilistele, kes otsivad usaldusväärset ja stiilset korpust oma PC komponentide jaoks. See Mid Toweri korpus on elegantse ja minimalistliku disainiga, mille must väliskuju sobib hõlpsasti mis tahes konfiguratsiooni, pakkudes samas piisavalt ruumi riistvarakomponentidele. See toetab ATX, Micro-ATX ja Mini-ITX emaplaate, mistõttu ühildub see paljude erinevate konfiguratsioonidega. Korpusesse on eelnevalt paigaldatud 120 mm tagumine ventilaator, mis hõlbustab tõhusat õhuvoolu ja jahutusjõudlust kohe karbist väljudes, hoides teie süsteemi koormuse all sujuvalt töös. Nende jaoks, kes vajavad täiendavat jahutust, on korpusel mitu ventilaatori kinnituspunkti, mis tagavad parema temperatuuri kontrolli. Lisatud optilise kettaseadme (ODD) pesa muudab selle mitmekülgseks kasutajatele, kes vajavad endiselt kettamälu funktsionaalsust, ning lisab kaasaegsetele arvutitele nostalgia hõngu. Sees pakub Zalman T6 nutikat paigutust koos spetsiaalse kaablijuhtimise kohaga, mis mitte ainult ei paranda esteetikat, vaid optimeerib ka õhuvoolu kogu korpuses. See toetab kuni 280 mm pikkuseid videokaarte, kuni 165 mm kõrguseid protsessorijahuteid ja kuni 180 mm pikkuseid toiteallikaid, võimaldades võimsaid konfiguratsioone. Esipaneel pakub olulisi ühendusvõimalusi, sealhulgas USB 3.0 ja USB 2.0 pordid, samuti audiopistikuid, mis võimaldavad mugavat juurdepääsu välisseadmetele ja multimeediaseadmetele. Seadmepesa tööriistadeta disain lihtsustab paigaldus- ja uuendamisprotsesse, muutes selle kasutuse lihtsaks igasuguse kogemustasemega disainerite jaoks. Kokkuvõttes ühendab Zalman T6 ATX Mid Tower funktsionaalse disaini ja praktilised omadused, mis teeb sellest täiusliku valiku tasakaalustatud ja suure jõudlusega lauaarvuti jaoks.
Full mesh construction on the front ensures optimal ventilation The sense of unity between the front mesh and the tempered glass on the side panel creates a unique Zalman design. Exceptional airflow Designed for optimal air intake with a full mesh front panel and pre-installed addressable RGB fans allows for optimal and maximum airflow. High performance addressable RGB fan The mesh front panel and RGB fans provide optimal airflow and stunning RGB lighting effects (supports up to 8 fans). ARGB controller Press the LED I/O button to change the LED pattern and color (26 patterns) Press and hold the LED button for 3 seconds to sync the motherboard after the white light flashes once Press and hold the LED button for 6 seconds to turn off the LED after the white light flashes twice Press the LED button again to disconnect the motherboard sync and change the controller mode Magnetic dust filter Protects components and ensures unobstructed airflow by filtering dust. Bottom dust filter Protects the power supply from dust accumulation. Easy-to-use hinged glass side panel A hinged glass panel provides easy access to the interior.
Baltimore 530 Mini tower case 1x USB 3.0 + 2x USB 2.0 + HD audio ABS with hair-line & shinny finish Optional: 1 x 80mm at rear, 120mm at front PCI length/CPU cooler height: 270mm/140mm
The Akyga AK36BK housing is a product in the Micro ATX standard, which advantage is minimalism that allows you to complete a computer that occupies a small space both in the office or at home. Light and small in sized, the product has an aesthetic look. It supports motherboards in the following formats: Micro ATX, Flex ATX and Mini ATX. The housing allows mounting a graphics card up to 250 mm long and up to 3 additional fans supporting cooling. The product architecture is adapted to the installation of disks and drives in 3 internal bays. Two 3.5 "and one 2.5" or two 2.5 "and one 3.5". The front panel of the housing has two USB A ports, one in 2.0 standard and one in a much faster 3.0 version. Above them there are sockets for connecting a microphone and audio equipment.
The Jonsbo Z20 Mesh is a stylish and functional Micro-ATX case, specially designed for PC enthusiasts who value a compact design and optimal cooling. With its mesh front and side panel, it offers excellent airflow. Mesh front and side panels allow for optimal cooling Compact size with carrying handle – Perfect for on the go Supports graphics cards up to 363 mm in length for high-end GPUs USB 3.1 Type-C port on the front for fast data transfer Compact dimensions save space without compromising performance Efficient Cooling and Modern Design The Z20 Mesh is specially designed for first-class airflow and ensures efficient cooling of your components. Thanks to its well-designed mesh panels and optimized air guidance, your PC system stays cool and powerful even under heavy load. Benefit from high compatibility despite its compact build. The case offers space for large GPUs, powerful cooling systems, and cable management – without appearing bulky. Versatile Compatibility and Easy Installation This case supports both Mini-ITX and Micro-ATX motherboards and offers flexible mounting options for various hardware configurations. The thought-out interior design makes installation and cable management easy. User-Friendly Front Ports With a USB 3.1 Type-C port, a USB 3.1 Type-A port, and headphone and microphone jacks on the front, the Z20 Mesh provides fast and convenient access to important connections for your peripherals. The integrated carrying handle makes the Z20 Mesh perfect for easy transport – ideal for LAN parties, events, or flexible setups.