Evolv X2 Redefine the desktop computer The Evolv X2 redefines the desktop computer with its see-through glass design, aluminum interior, and powerful vertical cooling solution. The entire chassis floats above its base, drawing in surrounding air and channeling it efficiently through the GPU and CPU. Hot air is expelled through the top ventilation, enhancing thermal performance. The interior of the Evolv X2 has been carefully designed to blend with the hardware components for a fully integrated look, with all cooling components sitting flush into the top and base. The integrated lighting and high-quality aluminum internal panels add flair to your system.
Conceptronic DONN19G. Ühenduvustehnoloogia: Juhtmega ühendatud, Hostiliides: USB 3.2 Gen 1 (3.1 Gen 1) Type-C, USB Power Delivery kuni: 100 W. Toote värv: Hall, Ühilduvad mälukaardid: MicroSD (TransFlash), SD, Andmeedastuskiirus: ...
The Phanteks XT M3 impresses with a space-saving design that offers you more than enough room for high-end components. With effective cooling and tidy cable management, the case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact size: Space-saving case for high-end hardware Effective cooling: Space for up to nine fans Large radiator: Supports installation of a 360 mm radiator on the top Tidy build: Room for excellent cable management Back-connect support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini-case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SFF case built for big things. Compatible with high-end graphics cards and motherboards supporting back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports the installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360-mm radiator can be fitted on top if you prefer water cooling. Besides fans and a radiator, the mesh front also ensures very good airflow. This helps prevent hot air from accumulating inside your case. Your new gaming PC with clean cable management Managing cables neatly is not easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also improves airflow. Mini-ITX case built for powerful hardware Even a large graphics card fits in effortlessly—the case offers space for a GPU up to 430 mm in length. Note that you cannot install fans at the front if you use the maximum GPU length. The CPU cooler should not exceed a height of 175 mm, and the power supply should not be longer than 150 mm.
Cooler Master Elite 502 Lite computer case (black).The Elite 502 Lite is a premium chassis designed for enthusiasts who want top performance and excellent temperature control. The advanced full mesh front panel guarantees maximum airflow, which helps maintain the ideal climate inside the case even under extreme load. The design is able to accommodate radiators up to 420 mm, powerful graphics cards up to 410 mm in length and back-connector motherboards, which translates into a minimalist look and easier, faster component installation.Thoughtful cable managementThe Elite 502 Lite focuses on order and ergonomics - back-connector motherboard support frees up front space, giving the interior a modern and neat look. With 33-35 mm of space behind the motherboard tray, cable management is intuitive, aesthetically pleasing and allows for perfectly organized components.Professional temperature controlThe case already offers a 120 mm rear fan as standard, which takes care of stable airflow from the very first launch. With the ability to install as many as seven additional 120 mm fans or configurations with three 140 mm fans at the front and three at the top, as well as powerful heatsinks - up to 420 mm at the front and 360 mm at the top - the Elite 502 Lite easily stands up to the most advanced cooling systems, whether air or water.Space for future upgradesThe Elite 502 Lite's design was created with the future in mind. The case will accommodate graphics cards up to 410 mm in length, CPU coolers up to 170 mm, and power supplies up to 210 mm in length (after removing the HDD cage). This is the ideal solution for those planning to expand their computer set-up - without any compromises or space limitations.New generation I/O panelThe top of the case features an I/O panel with a USB 3.2 Gen1 Type-C port, a USB 3.2 Gen1 Type-A port and a universal 3.5mm audio jack. Such a solution guarantees instant connection of modern accessories, convenient data transfer and seamless communication with peripherals.Modularity and purityThe Elite 502 Lite offers a fully removable HDD cage for easy installation and further expansion of the computer. Integrated dust filters located on the top, front and bottom of the case effectively protect the interior from debris, extending the life of components and keeping them in impeccable condition. The sturdy steel construction and tempered glass (TG) side panel emphasize the exclusive character of the case and allow you to fully display your components.Includedcomputer casepre-installed rear fandust filters (top, front, bottom)removable HDD cageset of mounting screwsuser manual ManufacturerCooler MasterModelElite 502 LiteDimensions474 × 230 × 481 mm (with protrusions), 465 × 230 × 465 mm (without protrusions)Capacity49,73 LSupported motherboard formatsITX, Micro-ATX, ATX (with back-connector support), E-ATX (up to 30.5 × 27.7 cm, may limit cable management)Expansion slots73.5" bays22.5" bays2 (max. 6)I/O panel1× USB 3.2 Gen1 Type-A, 1× USB 3.2 Gen1 Type-C, 1× 3.5mm audio comboFan support (front)3× 120 mm or 3× 140 mmFan support (top)3× 120 mm or 3× 140 mmFan support (rear)1× 120 mmPre-installed fans1× 120 mm (rear)Radiator support (front)120 / 140 / 240 / 280 / 360 / 420 mm (limit: 457×140×27 mm)Support for radiators (top)120 / 140 / 240 / 280 / 360 mmSupport for radiators (rear)120 mmMaximum height of CPU cooler170 mmPSU length170 mm, 210 mm (without HDD cage)GPU length360 / 410 mm (without front heatsink)Space for cabling behind the board tray33-35 mmMaterialsSteel (body and right panel), TG tempered glass (left panel)Dust filterstop, front, bottomSupported power suppliesATX
Cabinet Form Factor: Midi Torn Mainboard Form Factor1Supported Mainboard Form Factor: ATXMicro ATX 3.5-inch Internal Drivesahtleid1(3.5-mm minijack) Headphones: 1(3.5-mm minijack) External värv: must Package Type1kg Pack kaal Netto (kg): 2.8 kg Pieces in pack1Box kaal Brutto (kg): 3.61kg Retail Packaging Netokaal Carton: 0.5 kg Retail Packaging Netokaal plastik1kg Packs in Box: 1EAN Code: 426045564361
Internal 2x 2.5 "/3.5" (transverse, hard disk cage), 2x 2.5 ", Front I / O 1x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphone, PCI slots 4, Fan (front) 2x 140mm (optional), Fan (rear) 1x 120mm, 1000rpm, 16dB (A), Fan (top) 1x 200mm (optional) or 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 330mm, Color black, inside black, Lighting integrated LED control, integrated RGB LED lighting, Dimensions (WxHxD) 220x411x441mm, Volume 39.88l, Weight 6.10kg, Housing type mini tower, Special features dust filter, viewing window made of glass, CA-1Q9-00S1WN-00
The DistroCase™ 350P is a multi-functional and truly unique open frame mid tower chassis. The body of the case is constructed with its own water loop, a D5 pump, and 48 LEDs that are compatible with TT RGB PLUS, NeonMaker Light Editing, and Motherboard RGB Software. The DistroCase™ 350P Mid Tower Chassis is a fully modular chassis with a distro plate as the chassis' main body made with SPCC & PMMA. This multi-functional PC enclosure is incorporated with its own water channels, reservoir (about 800ml coolant), a preinstalled D5 pump, and multiple inlets and outlets. The 48 LEDs on the DistroCase™ 350P Mid Tower Chassis are TT RGB PLUS and NeonMaker Light Editing Software compatible. Other than that, users also have an option to control the lights by synchronizing the case with motherboards including ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. The DistroCase™ 350P Mid Tower Chassis provides users, gamers, and enthusiasts with an easier way to design their water loops for the ultimate user experience. 5mm Thick Tempered Glass Window with Stunning Viewing The DistroCase™ 350P features one 5mm thick tempered glass panel which is designed to meet the highest standards in the industry. The enlarged glass windows permit users to fully display every RGB component in the system, and show off their dedication and skill sets. Rotational PCI-E Slots Rotational PCI-E slots gives you the option to display your graphics card either vertically or horizontally, creating plenty of flexible space in your system. Thermaltake TT Premium PCI-E 3.0 Extender (Optional) – Supports a wide range of GPU solutions with ultra-excellent quality. Features like, extreme high-speed cable with highly-routable design, EMI shielding with conducting polymer are crafted for meeting the most demanding system. Available in 300mm, 600mm and 1000mm length. Expansion and Liquid-Cooling Solution The DistroCase™ 350P Mid Tower Chassis can support up to an ATX motherboard, a CPU cooler with a maximum height of 130mm, two-way VGA placement of up to 320mm (with reservoir & radiator installed), a power supply with a length of up to 200mm, and up to two 3.5” or six 2.5” HDDs. When it comes to the cooling solution, the water loop in this case is built differently from traditional PC cases. The DistroCase™ 350P Mid Tower Chassis is a fully modular designed chassis with a distro plate as the chassis' main body. This multi-functional PC enclosure is incorporated with its own water channels, reservoir, and multiple inlets and outlets. You can house up to a 280mm or 360mm radiator at the front and 360mm radiator on the side. DMD – Dismantlable Modular Design The DistroCase™ 350P enables user to freely build the system from the ground up with given modular panels, racks, brackets, and pre-design mounting arrays. No more unreachable screw corners or gaps and enjoys installation in a breeze with Dismantlable Modular Design. Technical Data Case Type: Mid Tower Dimension: 567 x 333 x 490mm (H x W x D) Net Weight: 17.78 kg / 39.2 lbs Side Panel: 1x 5mm Tempered Glass Color: Black Material: SPCC & PMMA Drive Bays: ACCESSIBLE: 2 x 2.5”,HIDDEN: 2 x 3.5" or 4 x 2.5" Expansion Slots: 6 Motherboards:: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) I/O Port: USB 3.0 x 2, USB 2.0 x 2, HD Audio x 1 PSU: Standard PS2 PSU (optional) Radiator Support Front: 1 x 360mm or 1 x 240mm or 1 x 120mm 1 x 280mm or 1 x 140mm Left Side: 1 x 360mm or 1 x 240mm or 1 x 120mm Clearance CPU cooler height limitation: 130mm VGA length limitation: 320mm (With Reservoir & Radiator) PSU length limitation: 200mm
