Zalman P30 V2 micro-ATX Case with Tempered Glass and Panoramic View - White The Zalman P30 V2 micro-ATX case in elegant white combines a modern design with high functionality, ideal for PC enthusiasts and gamers. The Panoramic View side panel made of tempered glass shows off your components in all their glory and gives the setup a clean, minimalist look. The V2 version comes with optimized features and improved cooling performance for demanding builds. Key features of the Zalman P30 V2 case in white: Panoramic Tempered Glass Side Panel : Provides a complete view of the hardware and showcases it in style. Compact micro-ATX format : Perfect for micro-ATX and mini-ITX motherboards, ideal for powerful builds in a small footprint. Improved cooling performance : Support for multiple fans and water cooling for efficient heat dissipation and reliable operation. Modern white finish : Matches minimalist and bright setups and gives the system a fresh, timeless look. The Zalman P30 V2 case in white is the perfect choice for those who value aesthetics and efficiency. The combination of panoramic view, high-quality tempered glass and the elegant white design make it the ideal choice for sophisticated and style-conscious PC builds.
Darkflash DB330M Mesh computer case (white)Darkflash DB330M Mesh is a computer case designed for M-ATX and ITX standard motherboards. Its dimensions (368 × 218 × 400 mm) allow the construction of a compact set-up with a graphics card up to 305 mm long and CPU cooling up to 180 mm high. The design is based on a 0.5 mm SPCC steel frame and features a tempered glass panel and mesh front for efficient air or liquid cooling.Efficient air coolingThe Darkflash DB330M Mesh case supports up to 7 fans: 2 at the front, 2 at the bottom, 2 at the top and one at the rear. The top part of the design allows for the installation of fans in 120 or 140 mm sizes, while the remaining locations are provided for 120 mm fans only. This arrangement allows for the creation of a vertical cooling channel that promotes natural air circulation and efficiently dissipates heat from components.240 mm liquid coolingThe Darkflash DB330M Mesh allows you to mount a water cooler of up to 240 mm in the top. This allows you to install a high-performance AIO system without sacrificing other components. The maximum height of the air cooler is 180 mm.Mesh panel with filterThe front panel of the case is made of mesh, which improves airflow and also acts as a dust filter. Additional vents are also located on the top and bottom of the design.Space for longer GPUsA graphics card up to 305 mm in length can be mounted inside. The chassis offers 4 PCI slots, making it possible to mount two- and three-slot cards. The power supply compartment and cable space do not limit the length of the GPU.Glass side panelThe left panel is made of tempered glass to expose the computer's interior and components with RGB backlighting. The panel can be easily removed without tools.Separate space for cables and multiple portsThe back of the case features a contoured space and pass-through holes for orderly cable routing. This layout makes it easier to install components and improves airflow in the main compartment. The front panel features a USB 3.0 port, 2 USB 2.0 ports, one HD Audio port and a power button. This allows you to enjoy quick access to basic functions without having to reach the back of the case.ATX power supply compatibility and board supportThe bottom of the case has room for a standard ATX power supply. This makes it possible to mount full-power units without the space constraints typical of smaller enclosures. In addition, the Darkflash DB330M Mesh supports M-ATX and ITX motherboards, offering optimal conditions for building a home, office or gaming PC. The lack of pre-installed fans allows for individual selection of cooling components. ManufacturerDarkflashModelDB330M Mesh WhiteHousing typeMidi TowerSide panelTempered glassMotherboard standardM-ATX, ITXPower supply standardAt the bottomSlots for internal drives3.5" HDD x2, 2.5" SSD x1Expansion card slots4Max PSU length210 mmMax length of graphics card305 mmMax height of CPU cooler180 mmMax number of fans7Fan mounting optionsTop: 120 mm x2 / 140 mm x2; Bottom: 120 mm x2; Front: 120 mm x2; Rear: 120 mm x1Water cooling mounting optionsTop: 240 mmNumber of fans installedNo fans installedType of fansNo fans installedButtons and controlsPowerConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight400 mmWidth218 mmDepth368 mmWeight3.8 kg
Vielseitiger und geräumiger Big-Tower, Front- und Seitenteil aus Tempered Glass, mit flexibler Radiator- und hochkantiger Grafikkartenmontage, Platz für 3 Radiatoren bis 420 mm, für bis zu 11 Lüfter, 1x USB 3.1 Typ C / 4x USB 3.0 Typ A am I/O-Panel
Darkflash B351 Computer CaseThe Darkflash B351 is a minimalist computer case with over 10 years of industry experience. It features a modest yet elegant design and exceptional heat dissipation properties thanks to well-placed ventilation slots. With its spacious interior, you can easily accommodate all the necessary components for your computer without worrying about space constraints.Wide CompatibilityFurthermore, the Darkflash B351 stands out with its wide compatibility, making it suitable for various motherboard types, including ATX (305 x 244mm), M-ATX (244 x 244mm), and ITX (170 x 170mm). Moreover, you can install a graphics card with a maximum length of 345mm, giving you flexibility in choosing components. Made from high-quality steel, you can be confident that this case will serve you well for a long time while maintaining its quality.Front PanelThe front panel of the Darkflash B351 case not only looks elegant with its vertical vents but is also functional. The Power and Reset buttons, as well as USB 2.0 x 2, USB 3.0 ports, and audio inputs, are arranged in a single line, giving the case a clean appearance and providing easy access to ports and buttons, which is particularly useful in everyday use.Hard DrivesWhen it comes to hard drive placement, the Darkflash B351 offers the user many options. You can freely customize the internal layout to suit your preferences and needs, regardless of how many hard drives you want to install. This is another advantage of this case that allows you to make better use of space and optimize your computer configuration.SpecificationsBrand Darkflash Model B351 Material SPCC 0.5MM Motherboard ATX / M-ATX / ITX Case Size 395 x 200 x 440mm Equipment Size 350 x 185 x 425mm HDD & SSD 1 / 4 PCI Slots 7 VGA Card Max 345mm CPU Cooler Max 155mm Power Supply 140mm Input/Output Power, reset, USB3.0 x 1, USB2.0 x 2, HD Audio Cooling System Front: 120mm x 1, rear: 120mm x 1
Black case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Room for graphics cards up to 460 mm and CPUs up to 170 mm in height Installation of up to nine SSDs enables extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that convinces not only with its wide range of hardware possibilities, but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to receive true admiration. With the LUCA L70, you’re perfectly equipped to assemble your gaming PC exactly as you wish. This midi-tower offers more than enough space to keep your hardware cool, and is also extremely easy to take apart and put back together. Building your high-end setup has never been so easy! Comprehensive cooling options for your new build When building your own PC, cooling is one of the most important factors to consider. The LUCA L70 allows the installation of up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that with this combination, the power supply unit must be mounted on the top of the case. If you prefer mounting the PSU on the bottom, three fans can be installed on the top and only one on the bottom. Water cooling enthusiasts will also not be disappointed: radiators up to 420 mm can be installed in several locations. If the power supply is on the top, only a 240 mm radiator is possible there and a maximum 360 mm radiator on the bottom. If you mount the PSU at the bottom, there is room for a 420 mm radiator on the top as well as on the side. To prevent unnecessary dust buildup inside the case, there are dust filters on the top and bottom. This ensures a much longer lifespan for your hardware and saves you time and annoying cleaning. Thanks to the many options for installing fans and radiators, effective cooling is ensured so your high-end hardware always performs at its peak. In addition, the tower stands 4 mm above the ground on X-shaped legs, which further improves airflow. Case for powerful hardware So you can play even the most demanding games smoothly at high settings, the LUCA L70 accommodates a high-performance graphics card up to 460 mm in length. An included GPU bracket ensures it’s not subject to gravity. Vertical GPU installation is also possible—appropriate accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX with a width of up to 280 mm. To avoid cable clutter, it also supports motherboards with back-facing connectors when the PSU is on top, but only in ATX or micro-ATX format. The CPU height must not exceed 170 mm, and the power supply should be no longer than 190 mm. For plenty of storage for your programs and games, you can attach up to nine 2.5-inch drives to the side of the LUCA L70. Tool-free assembly and disassembly To make installing and swapping hardware as easy as possible, the LUCA L70 is fully modular. The front, side, and other parts can be taken apart and reassembled without any additional tools, plus the motherboard tray can be moved so you can install the motherboard, CPU, and CPU cooler independently.
Darflash FT350 computer case + 5 aRGB fans (black)Darkflash FT350 is a compact computer case designed for users who appreciate both aesthetics and functionality. It is equipped with three transparent tempered glass panels and five ARGB fans, so it perfectly combines cooling performance with a modern gaming design. It's also compatible with a wide range of popular components, so you can build a computer perfectly suited to your needs.Robust and spacious designThe FT350 case is made of durable metal (0.5 mm SPCC steel), which ensures its stability and strength. Despite its small size, it is very spacious - it allows you to mount a graphics card up to 330 mm long, a PSU up to 160 mm long and a CPU cooler up to 157 mm high. It also features compatibility with M-ATX and ITX motherboards. All this makes it easy for you to assemble a high-performance gaming or office PC!Advanced cooling systemThe FT350 allows you to create an extensive heat dissipation system - it will accommodate up to 7 fans. You can also install 240 mm water cooling in it. All this will allow you to freely play dynamic games or create complex graphics projects - without worrying that the computer will overheat! What's more, you'll find five powerful ARGB fans included, which are distinguished not only by their high efficiency, but also by their modern, stylish design.Various storage optionsThe Darkflash FT350 enclosure can support two 2.5" SSDs or one 3.5" HDD, allowing you to flexibly customize your storage. This is ideal for those who plan to store a lot of files, such as photos, videos or documents.Key ports and buttonsThe FT350's top panel features one USB 2.0 port and one USB 3.0 port for high-speed data transfer. So you can conveniently transfer files and connect peripherals of your choice! There is also an audio jack port, a Reset button and a power button.Unique panoramic perspectiveThe case is distinguished by three transparent panels made of tempered glass, so it provides a wide, panoramic view of the computer interior. Such a solution allows you to highlight individual components in an original way! For example, use components with RGB backlighting to give your equipment a unique gaming character. ManufacturerDarkflashModelFT350Housing typeMini TowerSide panelTempered glassMotherboard standardM-ATX / ITXSlots for internal disks / drives3.5" HDD x1 / 2.5" SSD x2Expansion card slots4Maximum PSU length160 mmMaximum length of graphics card330 mmMaximum height of CPU cooler157 mmMaximum number of fans7Fan mounting optionsTop: 2x 120 mm fan; Side panel: 2x 120 mm fan; Bottom: 2x 120 mm fan; Rear: 1x 120 mm fan;Water cooling mounting optionsTop: 1x 240 mm water cooling;Number of fans installed5Buttons and controlsPower button, Reset buttonConnectors1x audio jack, 1x USB 3.0, 1x USB 2.0Material0.5 mm SPCCColorBlackIncluded accessories5x ARGB fanHeight375 mmWidth280 mmDepth350 mmWeight4 kg
Tootekood: AIR 100 LITE (B)GTIN: 4710562740691Korpused
Small midi tower with tempered glass on the side, up to eight fans, space for a radiator up to 280mm, motherboards up to Micro-ATX, GPU up to 330mm and CPU cooler up to 161mm in height, up to four drives possible, two 120mm fans includedSmall case with tempered glass side panel Efficient cooling options with up to eight fans and radiators up to 280mm Support for motherboards up to Micro-ATX Space for graphics cards up to 330mm and CPU coolers with a height of up to 161mm Up to four drives possible Two 120mm fans included The Montech AIR 100 LITE: Minimalist case with high cooling performance The Montech AIR 100 LITE is the smaller variant of the Montech AIR 100 and impresses with its lightweight and minimalist design. Nevertheless, this midi tower offers extensive options for installing your hardware - particularly a variety of fans to keep your system cool. Well-cooled with fans and radiators Despite its small size, up to eight fans can be installed in the tower. The front supports a maximum of three 120mm or two 140mm fans. You can install two 120mm or 140mm fans at the top. A further 120mm fan can be installed at the rear, as well as up to two more 120mm fans above the power supply chamber. Two 120mm fans are already included at the front and rear. If you prefer water cooling - whether an all-in-one water cooler or a custom-built water cooling system - there are several locations where a radiator can be installed. The front supports a radiator up to a maximum of 280mm, the top supports a 240mm radiator, and another 120mm radiator can be installed at the rear. Hardware options The midi tower supports the installation of graphics cards up to 330mm in size. Motherboards up to Micro-ATX format are feasible. The CPU cooler should not exceed a height of 161mm. To store programs and games, up to four drives can be installed.
With the D32 series, Jonsbo targets everyone who wants to build their PC in a space-saving way. Compared to the D32 PRO, the D32 STD PC case addresses the midrange and budget segment with key features such as back-connect support and minimal front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsTempered glass side panel provides a subtle appearanceAmple space for cooling solutions allows the installation of high-performance hardwareDust filter protects your hardware from annoying dust particlesThe Jonsbo D32 STD White: Space-saving and subtle case for a wide range of hardwareWhether a midrange HTPC or a high-end PC, builds of all kinds comfortably fit into the D32 STD White from Jonsbo. This minimalistic case accommodates graphics cards up to 365 mm long and CPU coolers up to 164 mm high.Thus, even with the compact design of the case, adequate cooling of your hardware is ensured. In combination with up to six 120 mm fans, or one 120 mm fan and four 140 mm fans, the fans also provide enormous airflow inside the case.No cable clutter with back-connectWith back-connect motherboards such as ASUS's BTF series, MSI's PROJECT ZERO series, or GIGABYTE's Stealth series, the case is virtually free of visible cable clutter despite having the same footprint.Because most power and connection cables can be connected at the rear of the motherboard, you save time on cable management while still enjoying a clean look inside your case. Combined with the tempered glass side window, the view of your hardware is especially appealing.Powerful cooling in a small spaceTo ensure your high-performance hardware is sufficiently cooled even in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120 mm fans for sufficient airflow, a large dual-tower CPU cooler, or even an installable 240 mm AIO, your hardware will always remain cool, even under load.The dust filter on the bottom and mesh side panel design ensure your hardware stays free of dust and dirt. This keeps your temperatures optimal at all times and helps increase the lifespan of your hardware.
With the D32 series, Jonsbo targets anyone looking to build a space-saving setup. The D32 PRO PC case, unlike the D32 STD, is aimed at the high-end segment with special and practical features such as Back-Connect or an improved front I/O.Elegant and space-saving design for mATX motherboardsSeamless cable management with cutouts for back-connect motherboardsMesh side panel creates a discreet appearanceAmple space for cooling solutions allows installation of powerful hardwareThree dust filters protect your hardware from annoying dust particlesThe Jonsbo D32 PRO Mesh: Space-saving and discreet case for high-end hardwareWhether mid-range HTPC or high-end PC – builds of all types can comfortably fit in the D32 PRO Mesh from Jonsbo. In this minimal case, graphics cards up to 365 mm in length and CPU coolers up to 170 mm in height can be accommodated. In back-connect mode, the maximum height of the CPU cooler is reduced by just under seven millimeters.Thus, adequate cooling for your hardware is ensured even with the compact design of the case. Combined with up to six 120-mm fans, or one 120-mm fan and four 140-mm fans, the fans also provide tremendous airflow inside the case.No cable clutter with Back-ConnectWith back-connect motherboards such as the BTF series from ASUS, the PROJECT ZERO series from MSI, or the Stealth series from GIGABYTE, the case in B-mode, with about six to seven millimeters more space required, is virtually free of visible cable clutter.Since most power and connection cables can be attached to the back of the motherboard, you save on cable management and still maintain a clean look inside your case.Powerful cooling in a small spaceTo ensure your high-performance hardware stays properly cooled in the compact case, Jonsbo has developed an optimal cooling solution for the available space. With six 120-mm fans for sufficient airflow, a large dual-tower CPU cooler, or even a 240-mm AiO that can be installed, your hardware remains cool even under load.Three dust filters on the front, top, and bottom ensure your hardware stays free from dust and dirt. This way, your temperatures remain at an optimal level and the service life of your hardware is extended.
Tootekood: DS900WD WHITE W/O FAGTIN: 4711527003943Korpused
DarkFlash DS900WD computer case (white)Darkflash DS900WD is an enclosure designed for users who want practical solutions. The tempered glass side panel and wooden front panel provide good visibility of components and give the whole case a distinct look. It allows the installation of motherboards in ATX, M-ATX and ITX formats, giving you great flexibility when building your computer. With its spacious design and multiple mounting options, it provides convenient kit assembly and good air circulation.Various cooling optionsThe DS900WD offers space to install 12 120 mm fans or 2 140 mm fans and water cooling at the top 360 mm or 240 mm, and at the front 240 mm. This allows you to build an effective cooling system for powerful configurations. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation.Thoughtful layout and ample spaceThe chassis will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. There are 7 PCI-E slots, allowing the kit to be expanded with additional expansion cards. For storage media, space is provided for two HDDs or one SSD and one HDD, so you won't run out of space for games and files.Built-in portsThe Darkflash DS900WD chassis is equipped with a set of the most commonly used ports that make everyday use of the computer easier. On the top panel you'll find one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), while 2 additional USB 2.0 ports are ideal for connecting a mouse, keyboard, headphones or other accessories. There is also an HD Audio connector for convenient connection of headphones and microphone.Refined detailsOn the right side of the case is a metal mesh, which not only provides adequate ventilation, but also blocks larger dust particles from entering the case. What's more, the top and bottom mesh panels also protect your equipment from debris, and their magnetic design makes them easy to install and remove.Durable construction and stylish designThe body of the case is made of 0.5 mm SPCC steel, which ensures high durability. The whole unit measures 470 x 218 x 454 mm and fits into standard under-desk spaces. The stylish design and the ability to illuminate the fans make the set look modern. ManufacturerDarkflashModelDS900WD ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installedNo fans installedType of fansnoneButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight454 mmWidth218 mmDepth470 mm
Verbessern Sie Ihr Y70 und erleben Sie sinnvolle digitale Interaktion mit dem besten Display aller Zeiten in einem Gehäuse. Es erlaubt eine umfangreiche Bildschirmanpassung mit einer Vielzahl von Themen, Widgets und mehr. Mit einer Auflösung von 688 × 2560 (2,5 K) bei 14,9 Zoll, einer Bildwiederholfrequenz von 60 Hz, 10-Punkt-Multitouch-Funktion und umfassender Bildschirmanpassung durch HYTE Nexus, alles in das Gehäuse integriert, mit einem einfach zu installierenden Kit!
Darkflash DS900WS ATX computer case without fans (Black)The Darkflash DS900WS ATX (Advanced Technology eXtended, a standard motherboard format) is a spacious midi tower case that supports ATX, M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) motherboards, and its interior will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. The case allows the installation of up to 12 120 mm fans and water cooling. This makes the DS900WS ATX suitable for both gaming sets and heavy-duty PCs. The tempered glass side panel allows you to expose the computer's interior, and the presence of 7 PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots and space for 4 drives (2x HDD, 2x SSD) gives you ample room for expansion.Compatibility and mounting spaceThe case supports ATX, Micro ATX and ITX format motherboards, with the power supply mounted at the bottom as standard. Inside, you'll find space for two 3.5" HDDs (Hard Disk Drives) and two 2.5" SSDs (Solid State Drives) - giving you ample space for data, system and games. The user can install a graphics card up to 425 mm long and a CPU cooler up to 170 mm high. There are also 7 PCI-E slots, making it easy to expand the kit with additional cards.Advanced cooling systemThe Darkflash DS900WS ATX offers extremely extensive cooling capabilities. The chassis can accommodate up to 12 120 mm fans, allowing for effective temperature management even under intense load. It is also possible to mount water cooling - up to 240 mm in the front and up to 360 mm on the top. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation.Practical portsThe top panel features all the necessary connectors: one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), two USB 2.0 ports, and an HD (High Definition Audio) audio connector for headphones and microphone. In addition, there is a power and reset button, making it easier to use the computer on a daily basis. The whole thing is designed for convenience and quick access to the most important functions.Durable construction and thoughtful interiorThe case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - cold rolled structural steel), which ensures stability and resistance to damage. Its dimensions are 470 x 218 x 454 mm, making it compact, but still very roomy. The interior is designed in a way that makes it easier to mount components and run cables, resulting in better airflow and a more organized look. In addition, part of the right panel is made of metal mesh, which not only protects the hardware from dust, but also helps air circulation. On the other hand, the top and bottom parts of the case made of mesh further promote ventilation, and their magnetic design ensures quick and convenient installation/removal.Tempered glass and stylish designThe left side of the case features a tempered glass panel to expose the computer's interior - including fan backlighting and components. An additional wood-style accent on the front adds a subtle but original touch. ManufacturerDarkflashModelDS900WS ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installedNo fans installedType of fansINF24TButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight454 mmWidth218 mmDepth470 mm
AORUS C500 GLASS - Optimized Airflow design - Support Motherboards up to E-ATX - Up to 420mm Liquid Cooling Compatible - Support Vertical GPU Installation - Modular Easy Installation - Full-Size Tempered Glass Side Panel - With USB 3.0 x2 and USB 3.1 Gen2 Type-C x1 on I/O panel - RGB Fusion 2.0 - Pre-installed 4 fans with ARGB & PWM Connector Hub
The Gembird Fornax X550 midi-tower chassis is designed to elevate the gaming experience with its cooling capabilities and modern aesthetics. Featuring three ARGB PWM fans, this chassis ensures efficient airflow while keeping components cool during intense gaming sessions. The windowed side panel allows for a view of the internal setup, perfect for showcasing custom builds. Equipped with front panel connectors featuring USB 3.1 and USB-C ports, the Fornax X550 promotes seamless connectivity for all peripherals and devices. Compliance with ISO 9002 and RoHS standards reflects a commitment to quality and safety in design, making it a reliable choice for gamers and PC builders alike.
Darkflash DS900WD ATX computer case (black) + 4 fansDarkflash DS900WD is an enclosure designed for users who want practical solutions. The tempered glass side panel and wooden front panel provide good visibility of components and give the whole case a distinct look. It allows the installation of motherboards in ATX (Advanced Technology eXtended, a standard motherboard format), M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) formats, giving you great flexibility when building your computer. With a spacious design and multiple mounting options, it provides convenience in assembling the kit and good air circulation. The kit comes with 4 fans.Various cooling optionsThe DS900WD offers space to install 12 120 mm fans or 2 140 mm fans and water cooling at the top 360 mm or 240 mm, and at the front 240 mm. This allows you to build an effective cooling system for powerful configurations. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation. As standard, the chassis is equipped with 4 fans to promote air circulation right from installation.Thoughtful layout and ample spaceThe chassis will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. There are seven PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots, allowing the kit to be expanded with additional expansion cards. For storage media, space is provided for two HDDs (Hard Disk Drive, hard drive) or one SSD (Solid State Drive, solid state drive) and one HDD, so you won't run out of space for games and files.Built-in portsThe Darkflash DS900WD chassis is equipped with a set of the most commonly used ports that make everyday use of the computer easier. On the top panel you'll find one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), while 2 additional USB 2.0 ports are ideal for connecting a mouse, keyboard, headphones or other accessories. There is also an HD Audio (High Definition Audio, a high-quality audio connector) for convenient connection of headphones and a microphone.Refined detailsOn the right side of the case is a metal mesh that not only provides adequate ventilation, but also blocks larger dust particles from entering the case. What's more, the top and bottom mesh panels also protect your equipment from debris, and their magnetic design makes them easy to install and remove.Durable construction and stylish designThe body of the case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - structural steel), which ensures high durability. The whole thing measures 470 x 218 x 454 mm and fits into standard under-desk spaces. The stylish design and the ability to illuminate the fans make the set look modern.Includedcomputer casefan x4user manual ManufacturerDarkflashModelDS900WD ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installed4Type of fansINF24T ARGBButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight454 mmWidth218 mmDepth470 mm
Modularer Big-Tower der Superlative mit vielen Features:, RGB-LED-Beleuchtung, Window aus Hartglas, großer Wakü-Support, fünf vorinstallierte Fans, vertikale Montage der GPU
Elegant Midi-Tower in Black, discreet design made of aluminum and steel, side panel made of Tempered Glass, for motherboards up to E-ATX (max. 305 x 285 mm), space for a maximum 360mm radiator on the top, graphics cards up to 330 mm, 2x 2.5-inch and 4x 2.5-inch/2x 3.5-inch drive bays.
Stylischer Mini-Tower in Schwarz, große Mesh-Front für hohen Airflow, zwei vorinstallierte ARGB-Lüfter, Seitenteil aus Tempered Glass, Netzteilabdeckung mit Cutout, Grafikkarten bis 347 mm, CPU-Kühler bis 184 mm
CORSAIR Hydro X Series XF Compression Fittings are the perfect fit for your soft tubing custom cooling system, available in a range of styles and equipped with an ultra-tight compression seal.
New Tool-less HDD Tray System- Hard disk installation is quick and easy.- Supports nine 3.5″ or 2.5″ HDDs.。- The HDD trays can be removed to accommodate build preferences, including more room for high-end graphics cards or water cooling radiators.3.5″/2.5″ drive bays behind the MB tray- 3.5″ HDD x1 / 2.5″ HDD x2Wheels for Easy ManeuverabilityWheels with rubberized grips allows the chassis to be easily moved when fully loaded. A locking mechanism on the rear wheels prevents the chassis moving when set in place.Maximum CompatibilityVGA Card length: 360mm – 480mm(Max) / PSU length: 200mm / CPU cooler height:180mm / Radiator 240mm or 280mmKujutegurFull-TowerTüüpPCMaterjalAlumiinium5,25" lahtrite arv1Emaplaadi toetatud kujuteguridATX,EATX,Micro-ATXToote värvMustAknagaEiSisseehitatud kõlar(id)EiLaienduspesade arv8CPU jahuti maksimaalne kõrgus17 cmGraafikakaardi maksimaalne pikkus52 cmToiteploki maksimaalne pikkus24 cmKaasas toiteplokkEiUSB 3.0 (3.1 Gen 1) A-tüüpi portide hulk4AudiosisendJahAudioväljundJahInstallitud esiventilaatorid3x 120 mmInstallitud tagaventilaatorid1x 120 mmToetatud kõvakettasuurused2.5,3.5"Laius220 mmSügavus611 mmKõrgus551 mmKaal9,3 kgPakendi laius618 mmPakendi sügavus280 mmPakendi kõrgus706 mmPakendi kaal10,5 kg
- Easy to assemble and dismantle- Excellent chassis structure with EMI/TUV/UL/Intel approved- Sharpless-crimped-edged whole structure- SECC/SGCC rustproof and galvanized steel available- PSUs are Intel P4 and AMD processors compatible- Optional cooling fan for better ventilation or Noiseless fan available- Full range chassis is for maket demand- Neat edge W/O bur- Stable quality warranty- Optional color panel design available- PCI Hole available- 8cm or 9cm fan available for chassis- 727 Case dimensions(Barenss Case) 35*17.5*35cm(L*W*H)KujutegurMikrotornTüüpPCMaterjalGalvaniseeritud teras, SECC, SGCC5,25" lahtrite arv23,5" lahtrite arv2Toote värvMustAknagaEiSisemiste 3,5" salvede arv2AudiosisendJahAudioväljundJahToetatud kõvakettasuurused3.5"Laius176 mmSügavus378 mmKõrgus350 mmPakendi laius218 mmPakendi sügavus438 mmPakendi kõrgus395 mm
ASUS TUF Gaming GT501 Mid-Tower Computer Case for up to EATX Motherboards with USB 3.0 Front Panel, Smoked Tempered Glass, Steel Construction, and Four Case Fans.
Mid-Tower with support for EATX Motherboards featuring a metal chassis and panels with custom TUF Gaming spatter pattern and 4mm-thick smoked, tempered-glass full view side panel.
Keep Your Cool with three 120mm Aura Sync RGB-illuminated fans, one 140mm rear PWM fan, and up to seven optional fan-mounting points.
Custom Liquid Cooling Ready with support for top or front mounted 360mm radiators, rear mounted 140mm radiator, and pre-drilled water pump/reservoir mounting holes.
Vertical GPU Expansion Slot plus 7 traditional expansion slots.
Ergonomic, Woven-cotton Carry Handles enable easy and safe transport up to 65lbs
Forget basic. The Valkyrie VK-02 Mid Tower ATX PC case is engineered for legendary builds. Its airflow-optimized design maximizes cooling potential, allowing your system to breathe. The massive LCD touchscreen gives you total control and system monitoring at your fingertips. 10.1" IPS LCD Touchscreen Supports up to 13 fans Up to 3x 360/420mm radiators Tempered glass side panel ARGB LED lightning Dual chamber design for superior cable management Compatible with ATX, Micro-ATX, and Mini-ITX motherboards
