No. of drive bays: 6 Dimensions: 455 x 205 x 475 mm Weight: 5.27 Other features: - PSU mounting location: bottom of the housing- Power supply tunnel: YES- CPU cooling height: 163 mm- Maximum length of the graphics card: 395 mm- Side panel with a window: YES, made of tempered glass- Filter under the power supply: YES- Filter on the upper panel: YES- Filter on the front panel: YES- Steel thickness: 0.7 mm- Increased space for PSU: 240 mm- Rubber flanges for cable entry holes- All herrings twisted in place of the broken ones- The radiator can not be installed on the front panel
Brutokaal: 3.85 kg Netokaal: 3.85 kg Saadetise kogus pakendis: 1 värv: must Audio-Out: 1 USB 2.0: 2 mikrofon: 1 Ümbrise tüüp: MidiTorn (MidiTower) PSU: Not included 3.5" Internal: 3 Cooling & Ventilation System: optional: 1x 92mm on the rear, 1x 120mm on the front, 2x 120mm on the left side panel 5.25" External: 3 2.5" Internal: 1 MicroATX: Jah Pakendi maht: 0.04061 cubm USB 3.0: 2 Saadetise pakendi laius: 21.8 cm Saadetise pakendi sügavus: 40.5 cm Saadetise pakendi kõrgus: 46 cm Saadetise pakendi kaal: 3.85 kg Mudeli nimetus: HO-12B
Internal 2x 2.5 "/3.5" (transverse, drive rails), 1x 2.5 "/3.5", 4x 2.5 ", Front I / O 2x USB-A 3.0, 1x microphone, 1x headphones, PCI slots 10 (3x riser card), Fan (front) 1x 140mm (RGB illuminated) or 3x 140mm (optional), Fan (rear) 1x 140mm (RGB illuminated), Fan (top) 2x 140mm (optional), Radiator sizes 120/240/280 / 360mm in front, 120 / 240mm above, 120mm in the back, Mainboard up to ATX (E-ATX with unknown dimensions possible), Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6") / E-ATX (unknown dimensions), Power supply ATX (max. 233mm deep), PSU position below, CPU cooler max. 180mm height, Graphics cards max. 387mm (without radiator), Color black, inside black, Lighting RGB header 3-pin ARGB (+ 5V / DATA / GND), integrated LED control, integrated RGB-LED lighting, illuminated fans, Dimensions (WxHxD) 230x502x491mm, Volume 56.69l, Enclosure type miditower, Special features Cable management, dust filter, graphics card holder, incl. Fan control, viewing window made of glass, Note Mainboard and case manufacturers refer to different dimensions as E-ATX. This manufacturer does not provide any information on supported E-ATX dimensions. Mainboards with E-ATX / SSI EEB dimensions of 305x330mm or 12 "x13" may not be supported, w/o psu, AEROPGSVISOR-G-BK-V1
Personalize your rig with addressable RGB modes! The A1 PLUS features a tinted transparent stand and the addressable RGB lights pierce through to create an awesome lighting experience. Loop in More Color! The A1 PLUS comes with two complementary Sirius Loop ASL120 fans. The matte black structure is fitted with dual radiant addressable RGB loops. The circular RGB outline is presented on both sides of the fan so lighting is present no matter the fan placement. Top Panel Wireless Charger The A1 PLUS's convenient top wireless charging station is now compatible with WPC Qi 1.2. It now emits 10W of power to strengthen the charging capacity to Qi enabled mobile devices and gaming mice.
The DistroCase™ 350P is a multi-functional and truly unique open frame mid tower chassis. The body of the case is constructed with its own water loop, a D5 pump, and 48 LEDs that are compatible with TT RGB PLUS, NeonMaker Light Editing, and Motherboard RGB Software. The DistroCase™ 350P Mid Tower Chassis is a fully modular chassis with a distro plate as the chassis' main body made with SPCC & PMMA. This multi-functional PC enclosure is incorporated with its own water channels, reservoir (about 800ml coolant), a preinstalled D5 pump, and multiple inlets and outlets. The 48 LEDs on the DistroCase™ 350P Mid Tower Chassis are TT RGB PLUS and NeonMaker Light Editing Software compatible. Other than that, users also have an option to control the lights by synchronizing the case with motherboards including ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. The DistroCase™ 350P Mid Tower Chassis provides users, gamers, and enthusiasts with an easier way to design their water loops for the ultimate user experience. 5mm Thick Tempered Glass Window with Stunning Viewing The DistroCase™ 350P features one 5mm thick tempered glass panel which is designed to meet the highest standards in the industry. The enlarged glass windows permit users to fully display every RGB component in the system, and show off their dedication and skill sets. Rotational PCI-E Slots Rotational PCI-E slots gives you the option to display your graphics card either vertically or horizontally, creating plenty of flexible space in your system. Thermaltake TT Premium PCI-E 3.0 Extender (Optional) – Supports a wide range of GPU solutions with ultra-excellent quality. Features like, extreme high-speed cable with highly-routable design, EMI shielding with conducting polymer are crafted for meeting the most demanding system. Available in 300mm, 600mm and 1000mm length. Expansion and Liquid-Cooling Solution The DistroCase™ 350P Mid Tower Chassis can support up to an ATX motherboard, a CPU cooler with a maximum height of 130mm, two-way VGA placement of up to 320mm (with reservoir & radiator installed), a power supply with a length of up to 200mm, and up to two 3.5” or six 2.5” HDDs. When it comes to the cooling solution, the water loop in this case is built differently from traditional PC cases. The DistroCase™ 350P Mid Tower Chassis is a fully modular designed chassis with a distro plate as the chassis' main body. This multi-functional PC enclosure is incorporated with its own water channels, reservoir, and multiple inlets and outlets. You can house up to a 280mm or 360mm radiator at the front and 360mm radiator on the side. DMD – Dismantlable Modular Design The DistroCase™ 350P enables user to freely build the system from the ground up with given modular panels, racks, brackets, and pre-design mounting arrays. No more unreachable screw corners or gaps and enjoys installation in a breeze with Dismantlable Modular Design. Technical Data Case Type: Mid Tower Dimension: 567 x 333 x 490mm (H x W x D) Net Weight: 17.78 kg / 39.2 lbs Side Panel: 1x 5mm Tempered Glass Color: Black Material: SPCC & PMMA Drive Bays: ACCESSIBLE: 2 x 2.5”,HIDDEN: 2 x 3.5" or 4 x 2.5" Expansion Slots: 6 Motherboards:: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) I/O Port: USB 3.0 x 2, USB 2.0 x 2, HD Audio x 1 PSU: Standard PS2 PSU (optional) Radiator Support Front: 1 x 360mm or 1 x 240mm or 1 x 120mm 1 x 280mm or 1 x 140mm Left Side: 1 x 360mm or 1 x 240mm or 1 x 120mm Clearance CPU cooler height limitation: 130mm VGA length limitation: 320mm (With Reservoir & Radiator) PSU length limitation: 200mm
Kompaktes Gehäuse für UCFF-Boards (Intel NUC), lüfterlose Kühlung durch passives Gehäusedesign, große Kühlfinnen, gebürstetes Aluminium in schwarz, Front mit 2x USB-3.0- und 2x USB-2.0-Ports, Platz für 1x 2,5-Zoll-Datenträger, VESA-kompatibel
Elegant midi-tower in white, side doors made of tempered glass, addressable RGB LED lighting, space for 2x 360 mm radiators, maximum 420 mm radiator, supports graphics cards up to 435 mm long, extensive water cooling support, and three pre-installed fans.
Modular Midi-Tower in black, with front and side panels made of tempered glass, side and top made of aluminum, for up to 9 fans, 2x 3.5/2.5 inch and 2x 2.5 inch, 1x USB 3.1 Type C / 2x USB 3.0 Type A. 4 DRIVE CAPACITY ADEQUATE AIRFLOW DUST MANAGEMENT OPTIONAL VERTICAL GPU BACK PANEL MODULAR BACK PANEL MODULAR PUMP STAND ALUMINUM MATERIAL DUAL CHAMBER DESIGN CONFIGURATION OF YOUR CHOICE MODULAR BACK PANELDecide how many expansion slots you need. Calculate the size of your fans & accessories. Pick your motherboard type. 3 kinds of back panels to meet your demand!5 slot 7 slot 3 slot SIDE RADIATOR CONFIGURATION WITH LONG GPU The 30mm space behind the side fan / radiator bracket allows users to mount fans, thus efficiently intake fresh air to directly cool the radiator and leaves enough space to install long GPUs in this compact case. WITH WATER COOLING IN MIND MODULAR PUMP STANDFriendly to custom water cooling users, the three different pump stands included can accommodate different scenarios. FLAT PUMP STAND IDEAL FOR MOUNTING THE PUMP DIRECTY AT THE BOTTOM OF THE CASE. ELEVATED PUMP STAND MOUNTING THE PUMP NEXT TO THE 240/280MM RADIATOR. EASILY MATCH INTERFACE.FLOATING PUMP STAND MOUNTING ABOVE A 120MM FAN ON A RADIATOR. EASILY MATCH INTERFACE. THE POWER BUTTON FINE GROOVES ARE GREAT TO THE TOUCH.A SERIES OF O11 DYNAMIC As a member of the O11 family, the O11D Mini is designed to support a maximum number of radiators to optimize the water-cooling potential, and this even with a smaller frame.O11D MINIDUAL-CHAMBER DESIGN FOR CABLE MANAGEMENT Carried from the design of the O11D series, cables quickly pass to the second chamber through rubber grommets. Multiple tie points and Velcro strap channels are provided to tidy up the cables while the SSD mounting bar helps keep the loose cables all snuggled up to ensure a clean look and prevent the right-side panel from not closing or bulging.SECOND CHAMBER WITH 4 DRIVES CAPACITY SSD Mounting Bar 2 x 2.5” SSD can be positioned at the front or back of the bar.Drive Caddy Optimized storage space for 2 x 3.5” HDD or 2 x 2.5” SSDCOMPLETE DUST PROTECTION All 3 ventilation intake sides are equipped with magnetic dust filters and a removable dust tray to prevent the dust from entering the case.O11D MINI VERTICAL GPU KITSThe vertical GPU enabled back panel can be adjusted up and down for clearance of the fans and radiator at the bottom of the case. DIMENSIONS (D) 420mm × (W) 269.5mm × (H) 380mm MOTHERBOARD E-ATX (Max 280 mm wide) / ATX / Micro-ATX / Mini-ITX PSU SFX / SFX-L MATERIAL Steel4 mm Tempered Glass2 mm Aluminum (top and left panel) FAN SUPPORT Top: 3 × 120mm or 2 × 140mm Side: 2 × 120mm or 2 × 140mm Bottom: 3 × 120mm or 2 × 140mm Rear: 1 × 120mm RADIATOR SUPPORT Top: 360mm or 280mm or 240mm or can’t mount Side: 240mm or 280mm radiator Bottom: 360 or 280mm or 240mm radiator GPU LENGTH CLEARANCE 395mm CPU COOLER HEIGHT CLEARANCE 170mm VGA Length 370mm DRIVES Right side 2 × 2.5" SSD + back plate 2 × 3.5" HDD (or SSD) EXPANSION SLOTS 3 or 5 or 7 slots (depends on back panel) IO PORTS 2 × USB 3.0, 1 × USB 3.1 TYPE-C, 1 × HD Audio, Power Button DUST FILTERS 1 × Top, 1 × Bottom, 2 × Side
Stilvolles ATX-Gehäuse mit gutem Airflow, mit luftdurchlässiger Mesh-Front, großes Seitenteil aus Temperglas, vier vorinstallierte 120-mm-ARGB-Lüfter, inklusive RGB-Controller, Grafikkarten bis 340 mm und CPU-Kühler bis 161 mm, 2x 3,5 oder 2x 2,5 Zoll, Front I/O mit 2x USB 3.0 und 1x USB 2.0
Tootekood: AIR 1000 PREMIUM BKGTIN: 4710562745689Korpused
Feature-rich mid-tower from Montech, for Mini-ITX / Micro-ATX / ATX motherboards, supports radiators up to 360 mm, tempered glass side panel with hinges, four pre-installed ARGB fans.
Optimized Airflow Design RGB Fusion with ARGB Connector Hub Support Motherboards up to E-ATX Up to 360mm Liquid Cooling Compatible Support Vertical GPU Installation Full-Size Tempered Glass Side Panel With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel Pre-installed 4 ARGB fans C301 GLASS WHITE CPU Height : 170mm GPU Length : 400mm PSU Length : 180mm, MidiTower PSU Not included, Front : 120mm x3 (ARGB); Rear : 120mm x1 (ARGB) Dimensions H=486 W=220 D=473 mm
Midi-Tower PC case, tempered glass side panel, mesh front, 5x Kolink Umbra ARGB PWM fans, supports GPUs up to 330 mm, power supply shroud, compatible with ATX motherboards
Shadow X2 Case Mesh Mesh front panel. Tempered glass hinged side door. Effective component protection and excellent component cooling. Set of dust filters. Wide compatibility with AIO water cooling systems. 4 x 120 mm fans included. Modern design. ATX MID-Tower Case Shadow X2 has dimensions of 407 x 211 x 455 mm, a Mesh front, and tempered glass hinged side doors. Thanks to this type of design, it looks very modern and provides great convenience. The dimensions of the hardware allow for the installation of an integrated liquid cooling system of 120, 240, or 360 mm on the front. There is also an optional 120 or 240 mm cooling option on the top of the case. What's more, the case accommodates standard CPU air cooling with a height of no more than 160 mm. Thanks to these dimensions, vertical mounting of the GPU graphics card is possible. 4 fans included with the PWM option The Shadow X2 Savio Case comes with 4 120mm fans with PWM control. They are characterized by performance, durability, and quiet operation. You can easily control them using motherboard-dedicated tools in the operating system or from BIOS/UEFI. In practice, this means that their speed can be adjusted over a wide range, typically from 10 -100%, while keeping noise levels low. I/O ports located on the top of the chassis The Shadow X2 has an I/O panel that features standard Power ON, Reset buttons, one USB 3.0 port, two USB 2.0 ports, HD Audio input, and output, as well as an additional RESET/LED button dedicated to controlling lighting effects. Multitasking interior The Case is characterized by high ergonomics, trouble-free installation and versatility. Its output parameters are a compromise between high performance and modern character. Importantly, you can expand the hardware at any time by adding, for example, more fans, water cooling, or other modules. The great advantage of Shadow X2 from Savio is that it accepts such parameters as you set for it. Specifications: Case Type: ATX Mid-Tower. Motherboard Compatibility: ATX, mATX, ITX, E-ATX. Supported disk formats: 2(1) x 3.5" HDD; 2(3) x 2.5" SSD. I/O ports: 1 x USB 3.0; 2 x USB 2.0; HD audio. Side panel: tempered glass. Maximum VGA length: 340 mm (vertical). Maximum CPU cooling height: 160 mm. Supported power supply types: all types of standard/semi-modular and modular power supplies. PCI expansion slots: 7 Dust filter: 1 x top, 1 x bottom (PSU), 1 x front. Fans included: 4 x 120 mm PWM, 4 pin, 800 - 1800 RPM (3 x front, 1 x rear). Supported fans:- front: 3 x 120/140 mm or 2 x 200 mm- rear: 1 x 120 mm- top: 2 x 120 (140) mm- bottom: 2 x 120 mm Water cooling support:- front: 1 x 120/240/360 mm- rear: 1 x 120 mm- top: 1 x 120/240 mm Product dimensions: (L x W x H) 407 x 211 x 455 mm. Housing material: SPCC 0.6 mml Front panel material/material: Metal mesh with small holes. Net/gross weight: 5.1/6.2 kg.
Tootekood: P30 AIR BlackGTIN: 8809213766596Korpused
Zalman P30 Air micro-ATX case with tempered glass and mesh front - black The Zalman P30 Air micro-ATX case in black offers the perfect balance between design and functionality. With a mesh front for maximum air circulation and a tempered glass side panel, this case enables both excellent cooling and a stylish presentation of your hardware. Main features of the Zalman P30 Air case: Tempered glass side panel : Presents your components in an elegant frame and allows a fascinating view of the interior. Mesh front for optimal cooling : The air-permeable front maximizes ventilation and supports a cool system, even under high load. Compact micro-ATX size : Designed for micro-ATX and mini-ITX motherboards, ideal for space-saving, high-performance builds. Elegant black design : Fits into any environment and offers a modern, professional look. The Zalman P30 Air case in black is ideal for anyone looking for a powerful and well-cooled system in a compact and stylish case. The combination of mesh front and tempered glass makes it the perfect choice for demanding PC builds that are designed for aesthetics and performance.
