The ASUS A31 PLUS ATX case offers support for hidden-connector motherboards, 360mm radiators, and 380mm graphics cards, with Black or White color options, four pre-installed ARGB fans, and clean cable management. Ready for Hidden Connectors: Built for motherboards featuring hidden connectors to optimize cable management for a clutter-free setup. Broad Compatibility: The A31 PLUS supports up to 360mm radiators combined with fans of up to 80mm thick, plus graphics cards up to 380mm in length and CPU air coolers with heights of up to 165mm. Panoramic Design: Tempered glass panels on the front and side offer unobstructed views of the main chamber. 8° Angled Base: The golden angle combines functionality and aesthetics, enhancing airflow efficiency for better thermal performance while widening the viewing angle for a more immersive experience.
Tootekood: AIR 100 LITE (W)GTIN: 4710562740882Korpused
Small midi tower with tempered glass on the side, up to eight fans, space for a radiator up to 280mm, motherboards up to micro-ATX, GPU up to 330mm, and CPU cooler up to 161mm height, up to four drives possible, two 120mm fans included - Compact case with side panel made of tempered glass - Efficient cooling options with up to eight fans and radiators up to 280mm - Support for motherboards up to Micro-ATX - Space for graphics cards up to 330mm and CPU coolers with a height of up to 161mm - Up to four drives possible - Two 120mm fans included The Montech AIR 100 LITE: Minimalist case with high cooling performance The Montech AIR 100 LITE is the smaller variant of the Montech AIR 100 and impresses with its lightweight and minimalist design. Nevertheless, this Midi-Tower offers you extensive options for installing your hardware - particularly a variety of fans to keep your system cool. Well-cooled with fans and radiators Despite its small size, up to eight fans can be installed in the tower. The front supports a maximum of three 120mm or two 140mm fans. You can install two 120mm or 140mm fans on the top. A further 120mm fan can be installed at the back, as well as up to two additional 120mm fans above the power supply chamber. Two 120mm fans are already included at the front and back. If you prefer liquid cooling - whether it's an all-in-one liquid cooler or a custom-built liquid cooling system - there are several places to install a radiator. The front supports a radiator up to a maximum of 280mm, the top supports a 240mm radiator, and a further 120mm radiator can be installed at the back. Hardware options The Midi-Tower supports the installation of graphics cards up to a size of 330mm. Motherboards are compatible up to the Micro-ATX format. The CPU cooler should not exceed a height of 161mm. To store programs and games, up to four drives can be installed.
The Montech X5 is a mid-tower case that combines elegant design with solid cooling performance. Featuring a clean front panel, tempered glass side window, and pre-installed fans, it is the ideal choice for budget-conscious PC setups. Modern mesh front panel with a clear, minimalist look Three 140mm and one 120mm pre-installed fans for immediate cooling Tempered glass side window for a clear view of the interior Compatible with E-ATX motherboards and GPUs up to 410mm in length Spacious interior with clean cable management Elegant design for any setup Enjoy high compatibility in a compact form factor with the Montech X5 mid-tower. It offers space for large GPUs, powerful cooling systems, and modern cable management—without appearing bulky. The X5 features a simple front without mesh that creates a tidy overall appearance. It is especially suited for users who value a clear, minimalist aesthetic. This case combines performance with style—the RGB lighting creates an impressive look and elevates your entire setup. Whether it’s a gaming rig or a workstation, with individually adjustable effects your PC becomes a real eye-catcher. Solid cooling performance with four fans Keep your components at optimal temperatures with the Montech X5, the perfect choice for those who value high-performance cooling. Its air-permeable design and optimized airflow architecture ensure ideal cooling, even during long gaming sessions or under heavy system loads—a case that perfectly combines performance and cooling. Despite the closed front panel, four 120mm fans are already installed to provide good base cooling. This means you’re ready to go without any additional investment. Thanks to the removable dust filters, your case remains free from dust deposits. The filters are easy to clean, ensuring your computer always stays optimally cooled. Easy assembly & flexible hardware support The interior offers space for standard ATX motherboards, long graphics cards, and multiple drives. Thanks to the well-thought-out structure, installation is quick and straightforward, even for beginners.
ASUS PRIME AP303 TG White. Type: PC, Produktfarve: Hvid, Understøttet motherboard, formfaktorer: micro ATX, Mini-ITX, ATX. Bagerste ventilatorer installeret: 1x 120 mm, Understøttede diametre for bagerste ventilatorer: 120 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 215 mm, Dybde: 485 mm, Højde: 425 mm. Pakkebredde: 285 mm, Pakkedybde: 465 mm, Pakkehøjde: 571 mm
The CORSAIR iCUE LINK 3500X LX-R RGB is a functional mid-tower chassis designed for optimal airflow and aesthetics. Featuring a tempered glass side panel and a glass front panel, this case allows for a view of your internal components while keeping them protected. The included bottom dust filter helps maintain cleanliness, ensuring long-lasting performance. With ample space for cable routing, this case promotes organized builds. The ability to support a back-connect motherboard provides versatility for your setup. Cooling is managed through a fan system that includes multiple locations for installation, allowing for a configuration that suits a variety of needs. Three 120 mm fans come included, with options for further expansion to accommodate up to three additional fans or multiple radiator sizes. With support for different form factors such as ATX, microATX, Mini-ITX, and Extended ATX, the case meets various requirements. It comes equipped with handy front panel connectors, making your setup easily accessible and user-friendly.
The CORSAIR AIR 5400 LX-R RGB PC case is designed for enthusiasts seeking a high-performance case with a clear structure and well-thought-out cooling management. Its innovative three-chamber design deliberately separates hot components from each other, ensuring an organized build. Three separate chambers optimize airflow for the GPU, CPU, and power supply—ideal for powerful builds with high cooling requirements. The iCUE LINK system with pre-installed LX-R RGB fans offers directly controllable lighting and effective cooling right out of the box. Curved tempered glass doors elegantly open to the side, providing easy hardware access and stylish presentation. Compatible with E-ATX motherboards and large graphics cards—perfect for demanding configurations. RapidRoute 2.0 simplifies cable management for clean builds without compromise. Three-chamber design: structure meets cooling performance At the heart of the AIR 5400 LX-R is a thoughtfully designed layout with three thermally separated zones. GPU, CPU cooling, and the power supply all receive individual airflow, lowering temperatures and supporting component longevity. Stylish, systemized access The curved, side-opening tempered glass doors combine elegance with functionality. They offer tool-free access to hardware and clearly showcase your setup—without unsightly cable clutter. Ready for high-end configurations Thanks to iCUE LINK integration, the case comes equipped for intelligent fan control and RGB sync. Radiators up to 360 mm can be installed in all three main zones, while the thoughtful interior easily accommodates even large hardware.
Das ProArt PA401 Wood Edition Beige besticht durch eine Frontblende aus Holz, die für einen unverwechselbaren, eleganten Stil sorgt und gleichzeitig Nachhaltigkeit fördert. Die charakteristische Frontblende aus Eschenholz des ProArt PA401 wurde weiter verfeinert und erhält durch ein neues beigefarbenes Finish eine moderne Optik. Ein aktualisiertes weißes Kabelset sorgt zudem für ein harmonisches Gesamtbild. Das Gehäuse verfügt außerdem über eine optimale integrierte Kühlung mit zwei 160-mm-Lüftern an der Vorderseite und einem 120-mm-Lüfter an der Rückseite sowie einem integrierten Lüfter-Hub, der einen optimalen Luftstrom ermöglicht. Die ProArt PA401 hat ein Frontgitter mit 33% Porosität, um den Luftstrom und die Belüftung zu maximieren. Die eingebauten 160-mm-Lüfter an der Vorderseite sorgen für einen effizienten Luftstrom von bis zu 138 cfm zu Grafikkarten und CPU-Kühlern und der äußere Ring, der die Lüfterblätter miteinander verbindet, reduziert die anfänglichen Vibrationen. Die Frontlüfter und der 120-mm-Hecklüfter mit PWM-Steuerung sorgen für einen optimalen Luftstrom, geringe Geräuschentwicklung, geringe Vibrationen und hohe Zuverlässigkeit. Die Anschlussoptionen sind über das vordere I/O-Panel leicht zugänglich, darunter eine PWM-Steuerung mit zwei Sektionen, ein USB Type-C-Anschluss mit 20 Gbit/s, zwei USB-A 3.0-Anschlüsse, HD-Audio und eine Sperre für die Power- und Reset-Taste.
Das Elite 690 verfügt über zwei gehärtete Glasscheiben, die Ihr System in Szene setzen, während eine holzstrukturierte Front und ein Mesh-Einlass Wärme mit effizientem Luftstrom verbinden. Dank der oberen und unteren Belüftung für vertikale Kühlung unterstützt es vielseitige Lüfter- und Kühlerkonfigurationen – perfekt für leistungsorientierte oder stilvolle Systeme. Die vertikale Anordnung trennt die Wärmezonen für eine bessere Luftzirkulation und eine sauberere Kabelführung. Bis zu 10 Lüfter in einer von unten nach oben verlaufenden Anordnung maximieren den Luftstrom und die Kühlung. Die aus echtem Holz gefertigte Frontplatte verleiht jedem Raum eine warme, organische Note. Das Gehäuse enthält 3 in Reihe schaltbare ARGB-Lüfter mit vollständiger Unterstützung für die Beleuchtungssynchronisierung des Motherboards. Das Elite 690 verfügt über einen USB 3.2 Gen 2x2 Typ-C und zwei USB 3.0-Anschlüsse für blitzschnelle Konnektivität.
The MasterFrame 360 PANORAMA is an open showcase case designed for users who demand both performance and presentation. Featuring panoramic tempered glass side panels, modular component support, and next-generation connectivity, it provides an impressive platform to display your hardware and creativity. With an integrated PCIe 5.0 riser and ARGB spotlights, it is ready to shine straight out of the box. Introducing the first 360-degree showcase case on the market—specially developed for open-loop liquid cooling. Create a complete cooling loop around your system, with dedicated space and mounting options allowing tubes to run around all sides like a custom roller coaster. Display your setup—and your collectible items—from every angle with ultra-clear tempered glass panels on three sides. Like a 360-degree display case, it showcases every detail of your components and figures with stunning clarity. Whether you want to highlight an open-loop liquid cooling system or custom hardware configurations, this case transforms your rig into a breathtaking centerpiece with story and style. The mirrored front platform allows you to display your favorite collectibles, figures, or themed accessories, merging your personal style with your system's aesthetics. Combined with the forward-facing ARGB effects, your setup becomes a vibrant and playful showcase. To deliver outstanding thermal performance, the case supports fan sizes from 120 mm to 200 mm and accommodates up to twelve 120 mm fans—six at the top and six at the bottom. It also supports radiators up to 360 mm in length, meeting the cooling requirements of high-end, custom liquid cooling setups. Compatible with Mini-ITX, Micro-ATX, and ATX motherboards, including BTF (Back-Connect) layouts within the ATX form factor. The case accommodates GPUs up to 430 mm in length and PSUs up to 210 mm, designed to support flagship components without compromise. Additionally, it features a USB 3.2 Gen 2x2 Type-C (up to 20G) port and 2x USB 3.2 Gen 1 Type-A ports (up to 5G).
Befreien Sie sich mit dem CORSAIR FRAME 4000D RS Wood von den Einschränkungen herkömmlicher PC-Konstruktionen. Das neue Modell verfügt über eine einzigartige Frontblende aus Walnuss- oder Eichenholz und vereint Stil und Leistung auf perfekte Weise. Es ist mit dem innovativen FRAME Modular Case System ausgestattet, das Ihnen eine beispiellose Flexibilität bei der individuellen Gestaltung Ihres PCs bietet. Das InfiniRail-Montagesystem vereinfacht die Installation von Lüftern, während die Unterstützung für 3x 360-mm-Kühlerplätze eine große Flexibilität bei der Kühlung bietet. Der geräumige Innenraum gewährleistet die Kompatibilität mit den leistungsstärksten Grafikkarten, und 4x RS120-PWM-Lüfter sind im Lieferumfang enthalten, um das gesamte System sofort nach dem Auspacken zu kühlen. Die Unterstützung für Reverse-Connection-Motherboards macht Ihr System noch zukunftssicherer.
Externally 3x 5.25 ", 1x 3.5", Internal 1x 2.5 "/ 3.5", 2x 3.5 ", Front I / O 1x USB-C 3.0, 2x USB-A 3.0, 2x USB-A 2.0, 1x headphone, 1x microphone, PCI slots 7, Fan (front) 1x 120mm (optional) or 1x 90mm (optional) or 1x 80mm (optional), Fan (rear) 1x 120mm (optional) or 1x 90mm (optional) or 1x 80mm (optional), Motherboard up to ATX, Power supply ATX, Power supply position above, CPU cooler up to max. 155mm height, Graphic cards up to max. 250mm, Dimensions (WxHxD) 185x412x450mm, Volume 34.30l, Weight 4.00kg, w/o PSU
No. of drive bays: 9 Weight: 6.46 Other features: The maximum length of the PSU 190 mmMaximum CPU cooling height 165 mmMaximum length of the GPU graphics card 380 mm
Internal 2x 3.5 "(transverse, hard drive cage), 2x 2.5", Front I / O 2x USB-A 3.0, 1x headphones, 1x microphone, PCI slots 4, Fan (front) 3x 120mm (optional) or 2x 140mm (optional), Fan (rear) 1x 120mm, Fan (top) 2x 140mm (optional), Radiator sizes 120/140/240 / 280mm at the front, 120/140/240 / 280mm at the top, 120mm at the back, Mainboard up to µATX, Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6"), Power supply ATX (max.160mm deep), PSU position below, CPU cooler max. 165mm height, Graphics cards max. 320mm, Color black, inside black, Lighting without lighting, Dimensions (WxHxD) 225x431x400mm, Volume 38.79l, Weight 6.20kg, Housing type minitower, Special features Cable management, dust filter, graphics card holder, viewing window made of glass, w/o psu, R-MACUBE110-BKNGM1N-G-1
The next generation of airflow cases from DeepCool has arrived, and they are indeed glorious. The CH560 DIGITAL is a newly designed mid-tower case with a concentrated focus on increased airflow throughout the entire chassis. Three bright PWM enabled 140mm ARGB fans are mounted in front of the main compartment, a hybrid side panel, and a dual status digital screen sets the CH560 DIGITAL apart from the competition. A BREATH OF FRESH AIR The CH560 DIGITAL provides exceptional airflow from all sides of the case, from the high airflow front to the hybrid tempered glass side panel, cool air is always available for the modern power-hungry components. HYBRID AIRFLOW GLASS SIDE PANEL A unique tempered glass and mesh hybrid side panel provides a crystal-clear view into the heart of your system while also supplying modern GPUs with additional ventilation: a functional yet elegant design. REAL-TIME DUAL-STATUS DIGITAL DISPLAY Monitor vital CPU and GPU information from the cockpit of your gaming station with the integrated double-status digital screen. Choose between CPU and GPU temperatures, utilization, or both (switches between temperature and utilization in 5-second intervals). A simple to use application will give you control of the display statuses. MAXIMUM COOLING CAPACITY The CH560 DIGITAL has a plethora of cooling configurations, from the ability to mount 360mm radiators on the top and front to the three included 140mm ARGB fans up front and a 120mm ARGB at the rear—the cooling configurations are endless. BIGGER, BRIGHTER, BETTER Three luminous PWM enabled 140mm ARGB fans come pre-installed on the front of the CH560 DIGITAL and introduce an abundant amount of fresh air into the chassis, these fans are mounted outside of the main compartment to provide maximum clearance for the largest of GPUs while maintaining a smaller footprint. The rear 120mm ARGB fan is also PWM enabled and will exhaust the warm air out of the chassis.
ProArt PA602 E-ATX Black computer case with Superior Airflow and Thermals, 420 mm radiator support, one 140 mm and two 200mm pre-installed system fans, front panel IR dust indicator, power lock latch, tool-less PCIe mounting, USB 20Gbps support Superior Airflow: 15.5 mm front panel grill with 45% porosity, two extra-thick 200 x 38 mm front fans for maximum air intake, and a 140 mm rear exhaust fan Superior Thermals: Two deflectors send incoming air towards the motherboard and other internal components to optimize temperatures Ample Space: Supports one 420 mm radiator for AIO cooling or custom liquid-cooling loops and the most robust graphics card get ample room for horizontal or vertical mounting Extensive I/O: Power Lock Latch and 2-section PWM control; USB Type-C 20Gbps port Front Panel IR Dust Indicator: Timely reminders to clean the filter to maintain top-tier airflow Creator-Friendly Design: Tool-less graphics card mounting, integrated graphics card holder and built-in fan hub come together to amp up the building experience Elegant aesthetics: Minimalist case adorned with ProArt themed design
