Midi-Tower-Gehäuse, mit Seitenteil aus Tempered Glass, sehr guter Airflow dank Vorderseite aus Mesh, bietet zwei ARGB-Strips an Front und Seite, drei integrierte ARGB-PWM-Lüfter, ARGB-Controller inklusive
Optimized Airflow Design RGB Fusion with ARGB Connector Hub Support Motherboards up to E-ATX Up to 360mm Liquid Cooling Compatible Support Vertical GPU Installation Full-Size Tempered Glass Side Panel With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel Pre-installed 4 ARGB fans C301 GLASS CPU Height : 170mm GPU Length : 400mm PSU Length : 180mm, MidiTower PSU Not included, Front : 120mm x3 (ARGB); Rear : 120mm x1 (ARGB) Dimensions H=486 W=220 D=473 mm
Midi-Tower PC case, tempered glass side panel, mesh front, 5x Kolink Umbra ARGB PWM fans, supports GPUs up to 330 mm, power supply shroud, compatible with ATX motherboards
Showcase case by Phanteks, with side panel and front made of Tempered Glass, supports up to 12x 120mm or 11x 140mm fans, up to four radiators at the same time, motherboards up to E-ATX and GPUs up to 490 mm, D-RGB strips and controller included
CTE T500 TG ARGB Snow Full Tower Chassis The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support up to a 420mm AIO radiator at the front and a maximum 360mm AIO radiator at the rear. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for centralized thermal efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE T500 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE T500 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. Experience the perfect combination of design and performance with our CTE T500 The CTE T500 TG ARGB Snow is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB White fans and can support a maximum of a 420mm AIO radiator at the front and a maximum of two 360mm AIO radiators at the front and rear. There's plenty of room to install cooling components, including front and rear fan brackets, top and right fan vents, bottom fan vent, and shroud vent, and the case can accommodate up to eleven 140mm/120mm fans. Other cool details include removable filters, pump and tank support, and Velcro straps for easy cable management. Our CTE T500 Snow is the perfect choice whether you're looking for a custom liquid cooling setup or a dual AIO setup! Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE T500 TG ARGB's versatile interior features two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Support for dual 360mm radiators Our CTE T500 TG ARGB Snow offers excellent cooling support for custom liquid cooling enthusiasts, allowing users to install up to two 360mm radiators simultaneously at the front and rear. To ensure AIO compatibility, users can install up to one 420mm AIO radiator on the front and up to two 360mm AIO radiator on the front and rear. All your dream cooling components will fit! The CTE T500 Full Tower case has a huge fan and cooler installation capacity: up to eleven 140 mm/120 mm fans and 360 mm AIO coolers in various locations (420 mm AIO cooler at the front). Moreover, equipped front and rear fan brackets and mounting locations on the top, right side and lid ensure easy installation of all desired cooling components. Rock your world with three pre-installed white 140mm CT140 ARGB fans The CTE T500 TG ARGB Snow Full Tower case is equipped with three white 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. We've tested everything, so you don't have to At Thermaltake, we always stress test our products under harsh conditions to ensure product quality. CTE T500 TG ARGB Snow Full Tower Chassis products have been tested at 100% full load for 30 minutes, with the highest-end CPU, GPU and motherboard at the time of testing, compared to a consumer-style configuration, which allowed us to test how the chassis handles in real-world situations.
Riesiger Big-Tower aus Stahl und Aluminium, drei Installations-Modi, duales System möglich, 16x Lüfter möglich, vier Radiatoren bis zu 480 mm, RGB-Beleuchtung und USB Typ C
The DIGITUS wall-mounted data communications cabinet is equipped with a glazed door and a cable gland in the roof and floor. The steel structure is made of steel sheet up to 1.5 mm thick. It is possible to change the side of the door hinges and adjust the depth. The rack cabinets are delivered unassembled, in a flat package. Assembly takes place in a few simple steps thanks to the included step-by-step instructions. Installation cabinet supplied unassembled Quick installation Door opening angle: 200° 1-point locking on front door 483 mm (19") rack profiles mounted at the front inside the cabinet, galvanized 483 mm (19") rack profiles with depth adjustment 1.1-1.5 thick, high-strength sheet steel, powder-coated Cable inlet with brush strip in the roof and plastic cover in the floor Ventilation slots for active and passive air supply and exhaust Front door: glass, single Side panels: on two sides Assembled: no
The Jonsbo D31 MESH mATX case is a sleek and versatile option for building a powerful computer. Its front mesh design allows for optimal airflow and its tempered glass side panel adds a touch of elegance. The case can accommodate up to 8 fans and 3 radiators, and can fit GPUs up to 400mm in length. The versatile layout allows for a customizable and optimized use of space.
Compact dual-chamber midi-tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case cover for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 on the front panel
The DIGITUS wall-mounted data communications cabinet is equipped with a glazed door and a cable gland in the roof and floor. The steel structure is made of steel sheet up to 1.5 mm thick. It is possible to change the side of the door hinges and adjust the depth. The rack cabinets are delivered unassembled, in a flat package. Assembly is carried out in a few simple steps thanks to the enclosed "step-by-step" instructions. Installation cabinet supplied unassembled Quick installation Door opening angle: 200° 1-point locking on front door 483 mm (19") rack profiles mounted at the front inside the cabinet, galvanized 483 mm (19") rack profiles with depth adjustment 1.1-1.5 thick, high-strength sheet steel, powder-coated Cable inlet with brush strip in the roof and plastic cover in the floor Ventilation slots for active and passive air supply and exhaust Front door: glass, single Side panels: on two sides Assembled: no
Midi-tower case with tempered glass, very good airflow, offers D-RGB lighting, four integrated 140mm D-RGB fans, compatible with MSI Project Zero and ASUS BTF motherboards
XPG INVADER X. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Placering af strømforsyning: Bund. Understøttede diametre for sideventilatorer: 120 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 245 mm, Dybde: 475 mm, Højde: 448 mm
Compact white mini-caseUp to five fans and breathable mesh ensure efficient airflowSupports motherboards up to Micro-ATXSpace for graphics cards up to 335 mm and CPU coolers up to 170 mm in heightConvenient carrying handle for transportThe Jonsbo C6 MAX: Portable mini-case with surprisingly ample spaceThe Jonsbo C6 MAX is a mini-case that provides enough space for high-end components despite its small size. Fans and breathable mesh on multiple sides ensure excellent airflow, efficiently cooling your hardware. Additionally, the tower is easy to transport with the practical carrying handle. If you have always wanted to take your gaming PC everywhere, the C6 MAX is worth a look!Efficient cooling with fans and radiatorsGood airflow is especially important in a small tower. Therefore, the C6 MAX can accommodate up to five fans. The top can hold either two 120 mm fans or one 140 mm fan, while the bottom can accommodate two additional 120 mm fans. The rear also supports a 120 mm fan. Together with the mesh on the top and front, this ensures that your hardware remains cool even in performance-intensive games.Space for your high-end hardwareThe mini-tower supports the installation of graphics cards up to 335 mm in size. Motherboards up to the Micro-ATX format are possible.The CPU cooler should not exceed a height of 170 mm, while the power supply can be up to 220 mm. A 2.5-inch or 3.5-inch drive can be installed for storing programs and games. Note that the fans on the bottom cannot be installed if you choose the 3.5-inch drive.
Small case for simple systems Two low-profile expansion slots for graphics card Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on your desk thanks to its light weight and fits into any setup with its simple black design. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports the installation of ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. In addition, the two low-profile expansion slots allow for the installation of a low-profile graphics card up to 190 mm. Please note that only a 1U Flex power supply unit no larger than 150 mm can be used.
Small case for simple systems Two fans installed Supports ITX size motherboards and CPU cooler height up to 38 mm Up to four 2.5-inch SSDs possible Power supply: 1U Flex up to 150 mm The Jonsbo N10 in detail The Jonsbo N10 is a small case that can be placed on the desk due to its light weight and fits into any setup thanks to its simple silver design. Cooling The mini-tower already comes with two small fans installed, providing sufficient cooling. Additional fans cannot be installed. For this reason, the tower does not support the installation of graphics cards, as these require more cooling. Nevertheless, a processor with integrated graphics can be installed without any problems. Hardware options The mini-tower supports the installation of ITX size motherboards. The CPU cooler should not exceed a height of 38 mm. To store programs and games, up to four 2.5-inch SSDs can be installed. For the power supply, note that only a 1U Flex power supply is possible, which should not exceed 150 mm in length.
Small case for simple systems Two fans installed Supports ITX-size motherboards and CPU cooler height up to 38 mm Up to four 2.5-inch SSDs possible Power supply: 1U Flex up to 150 mm The Jonsbo N10 in detail The Jonsbo N10 is a small case that can be placed on a desk thanks to its low weight and fits into any setup with its silver, minimalist design. Cooling The mini-tower already has two small fans installed, providing sufficient cooling. Additional fans are not possible. For this reason, the tower does not support the installation of graphics cards, as they require more cooling. However, a processor with integrated graphics can be installed without any problems. Hardware options The mini-tower supports the installation of ITX-size motherboards. The CPU cooler should not exceed a height of 38 mm. For saving programs and games, up to four 2.5-inch SSDs can be installed. For the power supply, make sure only a 1U Flex unit is possible, and it should not be larger than 150 mm.
With the LANCOOL 217 from Lian Li, you bring style, functionality, and performance into perfect harmony. This mid-tower case combines a natural wood look with powerful cooling and offers everything you need for modern PC builds – including pre-installed fans, a flexible layout, and wide motherboard compatibility. Wood meets high-end: Black with walnut accents 5 pre-installed fans: High-performance cooling straight out of the box Back-Connect-ready: Compatible with motherboards featuring rear connectors Flexible power supply mounting: Standard and rotated modes for more space and better airflow Tool-less fan mount: Quick and easy installation thanks to retaining clips Lian Li Lancool 217 in black: A case that combines design and performance demands The LANCOOL 217 impresses with its successful combination of solid steel, tempered glass, and decorative real wood elements. The perforated mesh front not only ensures maximum airflow but also completes the organic design. With its spacious interior layout, the case supports motherboards up to SSI-EEB, GPUs up to 380 mm in length, and CPU coolers up to 180 mm in height. Excellent cooling for high-end hardware The five pre-installed fans provide powerful airflow straight from the factory. You can flexibly choose between a GPU- or CPU-focused cooling scenario by simply adjusting the fan positions. Magnetic dust filters and tool-free installation make assembly easier, keep your setup clean, and ensure you can clean your system quickly and easily. PC case with easy installation of your components Another highlight of the LANCOOL 217 is the removable radiator bracket: It makes installing AIO water cooling with up to 360 mm radiators easier and creates extra space when installing hardware. Two power buttons in different locations make it easier to turn your PC on, depending on whether it sits on or under your desk. Thanks to thoughtful solutions such as the vertically mountable PCIe slot, HDD/SSD combination options, and generous cable management, the LANCOOL 217 is the perfect choice for style-conscious PC enthusiasts with high expectations.
