The Phanteks XT M3 impresses with a space-saving design that provides you with more than enough room for high-end components. Thanks to effective cooling and neat cable management, this case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact Size: Space-saving case for high-end hardware Effective Cooling: Room for up to nine fans Large Radiator: Installation of a 360 mm radiator at the top is possible Tidy Build: Space for clean cable management Back-Connect Support: Supports motherboards with a back-connect design The Phanteks XT M3: Sleek mini case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SF case built for greatness. Compatible with high-end graphics cards and motherboards with back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360 mm radiator can be fitted at the top if you prefer water cooling. Besides fans and a radiator, the mesh on the front also ensures very good airflow, so less hot air accumulates in your case. Your new gaming PC with clean cable management Laying cables neatly isn’t easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also allows for better air circulation. Mini-ITX case built for powerful hardware Even a large graphics card is no problem—the case offers space for a GPU up to 430 mm in length. Note that if you use the maximum length, you cannot install fans at the front. The CPU cooler should not exceed a height of 175 mm, and the power supply should be no longer than 150 mm.
The Montech X5 is a mid-tower case that combines elegant design with solid cooling performance. With a sleek front panel, tempered glass side window, and pre-installed fans, it's the ideal choice for budget-conscious PC setups. Modern mesh front panel with a clean, minimalist look Three 140mm and one 120mm fans pre-installed for instant cooling Tempered glass side window for an unobstructed view of the interior Compatible with E-ATX motherboards and GPUs up to 410 mm in length Spacious interior with tidy cable management Elegant design for any setup Enjoy high compatibility in a compact build with the Montech X5 Mid-Tower. It accommodates large GPUs, powerful cooling systems, and modern cable management—without appearing bulky. The X5 uses a simple front panel without mesh, delivering a clean overall appearance. It's especially suitable for users who value a clear, minimalist look. This case combines performance with style—the RGB lighting delivers an impressive appearance and enhances your entire setup. Whether for a gaming rig or workstation, customizable effects make your PC a real eye-catcher. Solid cooling performance with four fans Keep your components at optimal temperature with the Montech X5, the perfect choice for those who prioritize high-performance cooling. Its airflow-friendly design and optimized airflow architecture ensure ideal cooling, even during long gaming sessions or heavy system loads—a case that perfectly combines performance and cooling. Despite the closed front, four 120mm fans are already installed, providing good basic cooling right out of the box. This means you're ready to go without additional investment. Thanks to the removable dust filters, your case stays free from dust build-up. The filters are easy to clean, so your computer remains optimally cooled at all times. Easy assembly & flexible hardware support The interior offers space for standard ATX motherboards, long graphics cards, and multiple drives. Thanks to its thoughtful structure, installation is quick and straightforward, even for beginners.
Corsair Midi Tower 3500X LXR LINK TG. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Understøttede strømforsyning formfaktorer: ATX. Understøttede diametre for sideventilatorer: 120,140 mm, Understøttede diametre for bagerste ventilatorer: 120 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Bredde: 240 mm, Dybde: 460 mm, Højde: 506 mm
Internally 3x 2.5 "/3.5" (cross, drive rails), 3x 2.5 ", Front I / O 2x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphones, PCI slots 5, Fan (front) 1x 200mm, 800rpm (RGB illuminated), or 2x 140mm (optional), Fan (rear) 1x 140mm (optional), Fan (top) 2x 140mm (optional) or 4x 120mm (optional), Fan (below) 2x 120mm (optional), Radiator sizes 120/140/180 / 240mm at the front, 120/140/180/240 / 280mm at the top, Motherboard up to μATX, Power supply ATX, Power supply position below, CPU cooler up to max. 185mm height, Graphic cards up to max. 350mm, Color black / silver, inside black, Dimensions (WxHxD) 330x348x430mm, Volume 49.38l, Weight 8.70kg, Special features Cable management, dust filter, mainboard is installed twisted (rear connections), glass viewing window, CA-1L2-00S1WN-00
Cabinet Form Factor: Midi Torn Mainboard Form Factor1sisseehitatud Devices: Kaardilugeja Supported Mainboard Form Factor15.25-inch External Drivesahtleid: 3 2.5-inch Internal Drivesahtleid1Power Device Maksimum Quantity Supports: 1väljundusvõimsus: 500 W kaabel Included1kg Pieces in pack: 1Box kaal Brutto (kg): 4.86 kg Retail Packaging Netokaal Carton1kg Pieces in pack: 1Box kaal Brutto (kg): 4.86 kg Retail Packaging Netokaal Carton1
Tootjainfo: http://kolink.eu/Home/case-1/midi-tower-2/void.html Mõõtmed: 190 x 430 x 400 mm (L x K x S) Materjal: Teras, karastatud klaas, plastik Kaal: umbes 5,9 kg Värv: Must Kujutegur: ATX, Micro-ATX, Mini-ITX Võimalikke fänne kokku: 3x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 1x 120 mm (taga) Radiaatori kinnitus: 1x 240 mm (ees) Filter: Katus, põhi Sõidupesad: 2x 3,5 / 2,5 “(sisemine) 2x 2,5 “(sisemine) PSU: 1x tavaline ATX (valikuline) Laienduspesad: 7 I / O-paneel: 2x USB 2.0 (sisemine ühendus) 2x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 310 mm Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU pikkus: 180 mm
Product kirjeldus: Zalman S2 TG - Torn - ATX Product Type: System cabinet Form Factor: Torn I/O Ühendusi: 2 x USB 2.0 1 x kõrvaklapid 1 x microphone 1 x USB 3.0 Supported Motherboards: ATX, microATX, Mini-ITX System Cabinet Features: Supports 120 mm radiator in rear, toetab 120 mm radiator in front panel, tempered glass side panel, bottom dust filter, top magnetic dust filter Power Device: No toiteplokk mõõtmed (WxDxH): 19.6 cm x 42.4 cm x 46.2 cm kaal: 5 kg
The DistroCase™ 350P is a multi-functional and truly unique open frame mid tower chassis. The body of the case is constructed with its own water loop, a D5 pump, and 48 LEDs that are compatible with TT RGB PLUS, NeonMaker Light Editing, and Motherboard RGB Software. The DistroCase™ 350P Mid Tower Chassis is a fully modular chassis with a distro plate as the chassis' main body made with SPCC & PMMA. This multi-functional PC enclosure is incorporated with its own water channels, reservoir (about 800ml coolant), a preinstalled D5 pump, and multiple inlets and outlets. The 48 LEDs on the DistroCase™ 350P Mid Tower Chassis are TT RGB PLUS and NeonMaker Light Editing Software compatible. Other than that, users also have an option to control the lights by synchronizing the case with motherboards including ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. The DistroCase™ 350P Mid Tower Chassis provides users, gamers, and enthusiasts with an easier way to design their water loops for the ultimate user experience. 5mm Thick Tempered Glass Window with Stunning Viewing The DistroCase™ 350P features one 5mm thick tempered glass panel which is designed to meet the highest standards in the industry. The enlarged glass windows permit users to fully display every RGB component in the system, and show off their dedication and skill sets. Rotational PCI-E Slots Rotational PCI-E slots gives you the option to display your graphics card either vertically or horizontally, creating plenty of flexible space in your system. Thermaltake TT Premium PCI-E 3.0 Extender (Optional) – Supports a wide range of GPU solutions with ultra-excellent quality. Features like, extreme high-speed cable with highly-routable design, EMI shielding with conducting polymer are crafted for meeting the most demanding system. Available in 300mm, 600mm and 1000mm length. Expansion and Liquid-Cooling Solution The DistroCase™ 350P Mid Tower Chassis can support up to an ATX motherboard, a CPU cooler with a maximum height of 130mm, two-way VGA placement of up to 320mm (with reservoir & radiator installed), a power supply with a length of up to 200mm, and up to two 3.5” or six 2.5” HDDs. When it comes to the cooling solution, the water loop in this case is built differently from traditional PC cases. The DistroCase™ 350P Mid Tower Chassis is a fully modular designed chassis with a distro plate as the chassis' main body. This multi-functional PC enclosure is incorporated with its own water channels, reservoir, and multiple inlets and outlets. You can house up to a 280mm or 360mm radiator at the front and 360mm radiator on the side. DMD – Dismantlable Modular Design The DistroCase™ 350P enables user to freely build the system from the ground up with given modular panels, racks, brackets, and pre-design mounting arrays. No more unreachable screw corners or gaps and enjoys installation in a breeze with Dismantlable Modular Design. Technical Data Case Type: Mid Tower Dimension: 567 x 333 x 490mm (H x W x D) Net Weight: 17.78 kg / 39.2 lbs Side Panel: 1x 5mm Tempered Glass Color: Black Material: SPCC & PMMA Drive Bays: ACCESSIBLE: 2 x 2.5”,HIDDEN: 2 x 3.5" or 4 x 2.5" Expansion Slots: 6 Motherboards:: 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) I/O Port: USB 3.0 x 2, USB 2.0 x 2, HD Audio x 1 PSU: Standard PS2 PSU (optional) Radiator Support Front: 1 x 360mm or 1 x 240mm or 1 x 120mm 1 x 280mm or 1 x 140mm Left Side: 1 x 360mm or 1 x 240mm or 1 x 120mm Clearance CPU cooler height limitation: 130mm VGA length limitation: 320mm (With Reservoir & Radiator) PSU length limitation: 200mm
Product kirjeldus: Zalman S3 TG - Torn - ATX Product Type: System cabinet Form Factor: Torn I/O Ühendusi: 2 x USB 2.0 1 x kõrvaklapid 1 x microphone 1 x USB 3.0 Supported Motherboards: ATX, microATX, Mini-ITX System Cabinet Features: Supports 120 mm radiator in rear, toetab 120 mm radiator in front panel, tempered glass side panel, bottom dust filter, top magnetic dust filter Power Device: No toiteplokk mõõtmed (WxDxH): 19.6 cm x 42.4 cm x 46.2 cm kaal: 4.8 kg
No. of drive bays: 6 MOLEX power connectors: 0 Floppy power connectors: 0 SATA power connectors: 0 PCI-E 6-pin power connectors: 0 Number of power supply connectors PCI-E 6 +2 pin: 0 PCI-E 8-pin power connectors: 0 Number of power supply connector 4-pin 12V: 0 Number of power supply connector 4+4-pin 12V: 0 8-pin 12V power connectors: 0 Weight: 7.7
