The Phanteks XT M3 impresses with a space-saving design that offers you more than enough room for high-end components. With effective cooling and tidy cable management, the case is suitable for everyone—whether you’re a casual gamer or an enthusiast. Compact size: Space-saving case for high-end hardware Effective cooling: Space for up to nine fans Large radiator: Supports installation of a 360 mm radiator on the top Tidy build: Room for excellent cable management Back-connect support: Compatible with motherboards featuring back-connect design The Phanteks XT M3: Sleek mini-case for your gaming setup Show off your gaming hardware with the Phanteks XT M3—a compact SFF case built for big things. Compatible with high-end graphics cards and motherboards supporting back-connect design, this tower is ready for your modern setup. Phanteks XT M3 Case Effectively cooled thanks to fans and radiator The Phanteks case supports the installation of up to nine fans—for a cool build under any load. Three fans can be mounted at the bottom, directly under the graphics card, providing extra cooling for your GPU. Additionally, a 360-mm radiator can be fitted on top if you prefer water cooling. Besides fans and a radiator, the mesh front also ensures very good airflow. This helps prevent hot air from accumulating inside your case. Your new gaming PC with clean cable management Managing cables neatly is not easy—but with the Phanteks XT M3, cable management is a breeze. Cutouts in the right places make it easy to route cables cleanly. Combined with support for motherboards with back-connect design, you get a tidy build that not only looks good but also improves airflow. Mini-ITX case built for powerful hardware Even a large graphics card fits in effortlessly—the case offers space for a GPU up to 430 mm in length. Note that you cannot install fans at the front if you use the maximum GPU length. The CPU cooler should not exceed a height of 175 mm, and the power supply should not be longer than 150 mm.
Internal 4x 2.5 "/ 3.5" (cross, drive rails), 6x 2.5 "or 3x 3.5", Front I / O 2x USB-A 3.0, 2x USB-A 2.0, 1x microphone, 1x headphones, PCI slots 10 (2x riser card), Fan (front) 2x 140mm, 1400rpm (blue illuminated) or 3x 120mm (optional), Fan (rear) 1x 140mm, 1400rpm (blue illuminated), Fan (top) 3x 140mm (optional), Fan (below) 2x 120mm (optional), Motherboard up to E-ATX, Power supply ATX, Power supply position below, CPU cooler up to max. 190mm height, Graphic cards up to max. 310mm (410mm without HDD cage), Color white, inside white Dimensions (WxHxD) 274x592x577mm, Volume 93.59l, Weight 18.90kg, Special features Cable management, dust filter, glass viewing window, CA-1I7-00F6WN-00
Tootjainfo: http://kolink.eu/Home/case-1/midi-tower-2/void.html Mõõtmed: 190 x 430 x 400 mm (L x K x S) Materjal: Teras, karastatud klaas, plastik Kaal: umbes 5,9 kg Värv: Must Kujutegur: ATX, Micro-ATX, Mini-ITX Võimalikke fänne kokku: 3x 120 mm (ees) 2x 120 mm (katus) 1x 120 mm (taga) Eelinstallitud: 1x 120 mm (taga) Radiaatori kinnitus: 1x 240 mm (ees) Filter: Katus, põhi Sõidupesad: 2x 3,5 / 2,5 “(sisemine) 2x 2,5 “(sisemine) PSU: 1x tavaline ATX (valikuline) Laienduspesad: 7 I / O-paneel: 2x USB 2.0 (sisemine ühendus) 2x USB 3.0 (sisemine ühendus) 1x heli sisse / välja RGB / lähtestamise lüliti GPU maksimaalne pikkus: 310 mm Maksimaalne protsessori jahuti kõrgus: 160 mm Maksimaalne PSU pikkus: 180 mm
Dimensions: 212 x 465 x 398 mm (W x H x D) Material: steel, acrylic glass, plastic Weight: 5.8 kg Color: white, black Form factor: ATX, Micro-ATX, Mini-ITX Fan possible: 3x 120 mm (front) 1x 120 mm (rear) 2x 120/140 mm (cover) 2x 120 mm (bottom) 2x 120 mm (vertical bracket) Fan pre-installed: 1x 120 mm (front) 1x 120 mm (rear) Radiator mountings: 1x 240 mm (cover) 1x 240 mm (vertical bracket) Drives: 2x 3.5 / 2.5 inches (internal) 4x 2.5 inches (internal) Power supply (optional): standard ATX Expansion slots: 7 I / O panel: 1x USB 3.0 2x USB 2.0 1x per audio in / out 1x LED control button 1x power button 1x reset button Maximum graphics card length: 340 mm Maximum power supply length: 190 mm Maximum CPU cooler height: 163 mm
Fractal Design Pop Silent - Torn - ATX Product Type: System cabinet Form Factor: Torn Windowed Side Panel: Jah, tempered glass värv: must TG clear tint I/O Ühendusi: 2 x USB 3.0 Audio sisend Audio joon-out Supported Motherboards: ATX, Mini-ATX, Mini-ITX System Cabinet Features: kaabel management system, toetab 120 mm radiator in rear, PSU dust filters, toetab Kuni 280 mm radiator in front panel Power Device: No toiteplokk (ATX) mõõtmed (WxDxH): 21.5 cm x 47.35 cm x 45.4 cm kaal: 7.3 kg Manufacturer Warranty: 2-year garantii
Tootekood: LANCOOL 205 MESH C WHITEGTIN: 4718466012159Korpused
Midi-Tower in white, optimized for airflow with mesh inserts, for motherboards up to ATX form factor, three ARGB-PWM fans pre-installed, installation of 280mm radiators possible, removable dust filters included.
Optimized Airflow Design RGB Fusion with ARGB Connector Hub Support Motherboards up to E-ATX Up to 360mm Liquid Cooling Compatible Support Vertical GPU Installation Full-Size Tempered Glass Side Panel With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel Pre-installed 4 ARGB fans C301 GLASS WHITE CPU Height : 170mm GPU Length : 400mm PSU Length : 180mm, MidiTower PSU Not included, Front : 120mm x3 (ARGB); Rear : 120mm x1 (ARGB) Dimensions H=486 W=220 D=473 mm
The CORSAIR iCUE LINK 2500X RGB mid-tower is a marvel of system cabinet design, blending functionality with aesthetic appeal. This chassis supports a wide range of motherboards, from Mini-ITX to microATX, and accommodates video cards up to 400 mm in length, ensuring compatibility with gaming setups. The case's cooling system offers various configurations for fans and radiators to keep your components at optimal temperatures. With a tempered-glass side panel, your system's RGB lighting and meticulous build are on full display, complemented by the ease of cable management thanks to its dual chamber layout. Whether for gaming, content creation, or everyday use, the CORSAIR iCUE LINK 2500X RGB offers a solid foundation for any PC.
Tootekood: D31 STD BLACK SCGTIN: 6970620552491Korpused
Elegantes und vielseitiges mATX-Gehäuse, geschlossene Front für Silent-Builds, mit integriertem 8-Zoll-Display, Seitenteil aus Temperglas, bis zu 8 Lüfter und 3 Radiatoren möglich, für GPUs mit max. 400 mm Länge, versetzbares Netzteil für optimale Raumaufteilung
Full Tower CTE C750 TG ARGB case The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, motherboard side and rear of the case. CTE form factor Designed by Thermaltake The Thermaltake-designed CTE form factor stands for Centralized Thermal Efficiency and focuses on ensuring high levels of thermal efficiency for critical components. The design utilizes a 90-degree motherboard rotation, providing more efficient airflow paths. Since the CPU has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent supply of cold air is provided to dissipate the heat of the CPU and graphics card respectively. This overall approach has enabled CTE to provide better and more efficient intake airflow through major component placement and cooling, as well as optimizing heat removal from the system. Move critical heat sources (CPU and graphics cards) closer to cool air Because the CTE C750 processor has been moved much closer to the front panel and the graphics card closer to the rear panel, an independent cold air supply is provided to dissipate heat from the CPU and graphics card respectively. Active cooling for more efficient intake airflow This overall approach enabled the CTE C750 to provide better and more efficient intake airflow by positioning major components and cooling, as well as optimizing heat removal from the system. We provide cooling performance beyond your imagination! The CTE C750 TG ARGB is a purpose-built full tower E-ATX case from the new CTE series, designed to provide high levels of thermal efficiency to critical components. It comes with three pre-installed 140mm CT140 ARGB fans and can support a maximum of 420mm AIO radiators on the front, rear and motherboard side. Its dual-chamber design allows users to showcase key components and provides plenty of space for excellent cooling solutions, with the ability to accommodate up to 14 fans inside the case thanks to front, bottom and rear fan brackets and a top and side M/B vent. It also has lots of little details like swivel PCI-E slots, removable filters, a pump and tank bracket, and Velcro straps for easy cable management. Whether you're looking for a case for custom liquid cooling or a dual AIO setup, the CTE C750 TG ARGB is a high-end presentation case that allows you to imagine something outside the box. Create and show your dream structure Designed to meet the needs of both all-in-one and custom liquid cooling solutions, the CTE C750 TG ARGB's versatile interior includes two 4mm thick tempered glass panels on the front and left side, allowing users to view and admire all components in full RGB glory. Maximum radiator support - up to 360mm/420mm radiators in multiple locations Our CTE C750 TG ARGB offers excellent cooling support for custom liquid cooling enthusiasts, there are various support locations and enough space to arrange your own configurations. Up to 5 radiators (three 360mm and two 240mm) can be mounted simultaneously on our CTE C750, providing incredible radiator support. To ensure AIO compatibility, radiators up to 420 mm/360 mm in diameter can be installed on the front, rear and motherboard side, giving PC enthusiasts unlimited possibilities for the perfect configuration. All your dream cooling components will fit! The CTE C750 Full Tower case has a huge fan and cooler installation capacity: up to fourteen 140 mm fans and 360 mm/420 mm AIO coolers in various locations. Moreover, equipped fan brackets at the front, bottom and rear ensure easy installation of all desired cooling components. Amaze your world with three pre-installed 140 mm CT140 ARGB fans The CTE C750 TG ARGB Full Tower case is equipped with three 140 mm ARGB PWM fans on the front, top and rear. LED lighting effects can be manipulated using software supported by the motherboard. Users can create an amazing RGB lighting show while enjoying the highest cooling performance. Perfect protection against dust There are small details on the top, front, bottom, rear and right side of the housing, removable filters that provide excellent dust protection and can be easily removed for cleaning.
Midi-Tower PC case, tempered glass side panel, mesh front, 5x Kolink Umbra ARGB PWM fans, supports GPUs up to 330 mm, power supply cover, compatible with ATX motherboards
Modern Midi-Tower from Jonsbo in white, striking steel design, with u-shaped tempered glass on the side and front, graphics cards up to 405 mm, up to 9x 120-mm fans possible, space for two 360-mm radiators, motherboards up to ATX
Edler Big-Tower von Phanteks, geschlossenes Seitenteil, ideal als Server & Workstation & High-End-Gaming-Rig, optimiert für Luft- und Wasserkühlung, bis zu 503 mm lange Grafikkarten, zusätzliche seitliche Kühlung für GPUs und HDDs, für ATX- oder 2U-Netzteile
Well-equipped Midi-Tower, front and side panels made of Tempered Glass, left side panel and top with ventilation slots, space for up to 9x 120mm or 6x 140mm fans, GPU length of up to 420 mm, ARGB strip on the front, up to two power supplies possible
The Chieftec Apex Q tower chassis strikes a balance between cooling efficiency, performance, and quiet operation. Designed for both enthusiasts and professionals, this case is compatible with a broad spectrum of motherboards from ATX to Mini-ITX, ensuring versatility for various system configurations. Its front panel offers essential connectivity options, including USB 3.0 and USB-C 3.2 Gen 2 ports, along with audio in/out jacks, to accommodate all your peripheral needs. The Apex Q is engineered for effective cooling, with ample support for multiple fans and radiators to maintain optimal system temperatures. Additionally, its sound dampening panels help minimize noise, providing a more focused environment for gaming and professional tasks. Capable of housing high-end components with ease, the Apex Q demonstrates Chieftec's commitment to quality and thoughtful design.
Stylish midi-tower in white, with side panel and front made of tempered glass, excellent airflow thanks to very fine mesh, supports up to 8x 120mm fans & 2x 360mm radiators, integrated DRGB lighting (with controller), supports Back-Connect (ASUS & MSI)
