Horizon ARGB FLOW Midi Black Three 140 mm ARGB fans are installed in the case at the front, pushing air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. 3 140 mm ARGB fans pre-installed on the front of the case. 1 120 mm ARGB fan pre-installed on the rear of the case. Glass side panel in the form of hinged doors. Airy front and top panels. 2 x USB 3.0 and 1 x USB-C. Screw-out PCI-E slot brackets. Possibility of mounting E-ATX motherboards. Ready for water cooling. Power supply tunnel. Available in fashionable white or elegant black. Four dust filters at the bottom, top, front and side of the case. Easily removable mesh on the front. Space for 4 hard drives (in a configuration of 2 SSD / 2 HDD or 3 SSD / 1 HDD or 4 SSD). ARGB fan controller. Your dream case is here, not over the horizon. MODECOM Horizon is one of those cases that fully meets the need for a decent, solidly made and functional computer case. This classic-looking case has a lot to offer. There are three 140 mm ARGB fans installed as standard at the front and one 120 mm ARGB at the back of the case. In addition, inside you will find plenty of space even for E-ATX boards, high CPU cooling and long graphics cards. And all this is closed behind a glass panel in the form of a door, surrounded by airy mesh panels with dust filters. The whole thing is enclosed in one, perfectly designed MODECOM Horizon case. Don't close yourself off to new things The side panel made of tempered glass in the form of an opening door is the very convenience of assembling and cleaning the computer. You can easily and conveniently open the door and assemble the set, replace RAM, graphics card and other components. There is no simpler and more convenient solution for assembling and modifying the interior of the computer and cleaning it, like the one used in the MODECOM Horizon case. Tempered glass, in turn, allows you to expose the installed graphics card and other expensive components. Nothing can stop this wind The case has three 140 mm ARGB fans installed on the front, which force air into the computer, while one 120 mm ARGB, mounted on the rear panel, is designed to blow hot air out. You get a case ready to use right out of the box, all you need to do is mount the components in it and work on a well-cooled and ventilated computer. Create a storm But that's not all, you can install additional 3 120 mm fans or 2 x 140 mm on the top of the case yourself. There is also the possibility of mounting two 120 mm fans on the motherboard wall. A computer configured in this way will be optimally cooled, ensuring that components operate at low temperatures, while contributing to their longer lifespan. Ready for anything The case is adapted to mount E-ATX boards. The wide possibilities of arranging and expanding the computer will work well in both gaming computers and professional solutions. The unlimited freedom of computer configuration allows for the installation of modern components with the possibility of further expansion. Games and programs will find their place here The MODECOM Horizon case has space for 4 hard drives. Two 2.5 SSD drives will find their place on the motherboard tray. Placed in a convenient place for connection, they will work great as media for games and programs. The disk basket in the power supply tunnel allows for the installation of two 3.5 HDD drives or a configuration of 1 x 2.5 SSD and 1 x 3.5 HDD. You can also simply put on 2.5 SSD drives and mount two such drives in the power supply tunnel. If you add space for M.2 drives on the motherboard, the MODECOM Horizon computer will become a real storage for games and documents.
XPG BATTLECRUISER II ST. Formfaktor: Midi Tower, Type: PC, Produktfarve: Sort. Frontventiler installeret: 3x 120 mm, Understøttede diametre for frontventilatorer: 120,140 mm, Bagerste ventilatorer installeret: 1x 120 mm. Understøttede HDD-størrelser: 2.5,3.5". Bredde: 225 mm, Dybde: 506 mm, Højde: 550 mm. Pakkebredde: 339 mm, Pakkedybde: 643 mm, Pakkehøjde: 615 mm
The IcyDock MB982SP-1S is a 2.5" to 3.5" SAS/SATA converter with improved properties. This product was developed with the same dimensions, connector positions, and mounting holes as a conventional 3.5" HDD, so it can be used in any internal drive bay, as well as in any backplane or hot-swap device designed for 3.5" drives.TypeMounting frameColorsilverEAN4711132868746Manufacturer No.MB982SP-1SIntended useInstallation in a 3.5" drive bay in a PC caseUseDrive frameSuitable for2.5" SATA I / II / III HDD/SSD (7 - 15mm)MaterialMetal (SECC)Installable drives1x 2.5 inch internalRequired drive bays1x 3.5 inch internalFurther informationData transfer: 6 Gbit/sDimensionsWidth: 102 mm x Height: 25 mm x Depth/Length: 147 mmWeight327 grams
Darkflash DS900WS ATX computer case without fans (White)The Darkflash DS900WS ATX (Advanced Technology eXtended, a standard motherboard format) is a spacious midi tower case that supports ATX, M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) motherboards, and its interior will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. The case allows the installation of up to 12 120 mm fans and water cooling. This makes the DS900WS ATX suitable for both gaming sets and heavy-duty computers. The tempered glass side panel allows you to expose the computer's interior, and the presence of 7 PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots and space for 4 drives (2x HDD, 2x SSD) gives you ample room for expansion.Compatibility and mounting spaceThe case supports ATX, Micro ATX and ITX format motherboards, with the power supply mounted at the bottom as standard. Inside, you'll find space for two 3.5" HDDs (Hard Disk Drives) and two 2.5" SSDs (Solid State Drives) - giving you ample space for data, system and games. The user can install a graphics card up to 425 mm long and a CPU cooler up to 170 mm high. There are also 7 PCI-E slots, making it easy to expand the kit with additional cards.Advanced cooling systemThe Darkflash DS900WS ATX offers extremely extensive cooling capabilities. The chassis can accommodate up to 12 120 mm fans, allowing for effective temperature management even under intense load. It is also possible to mount water cooling - up to 240 mm in the front and up to 360 mm on the top. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation.Practical portsThe top panel features all the necessary connectors: one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), two USB 2.0 ports, and an HD (High Definition Audio) audio connector for headphones and microphone. In addition, there is a power and reset button, making it easier to use the computer on a daily basis. The whole thing is designed for convenience and quick access to the most important functions.Durable construction and thoughtful interiorThe case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - cold rolled structural steel), which ensures stability and resistance to damage. Its dimensions are 470 x 218 x 454 mm, making it compact, but still very roomy. The interior is designed in a way that makes it easier to mount components and run cables, resulting in better airflow and a more organized look. In addition, part of the right panel is made of metal mesh, which not only protects the hardware from dust, but also helps air circulation. On the other hand, the top and bottom parts of the case made of mesh further promote ventilation, and their magnetic design ensures quick and convenient installation/removal.Tempered glass and stylish designThe left side of the case features a tempered glass panel to expose the computer's interior - including fan backlighting and components. An additional wood-style accent on the front adds a subtle but original touch. ManufacturerDarkflashModelDS900WS ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installedNo fans installedType of fansINF24TButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorWhiteHeight454 mmWidth218 mmDepth470 mm
Darkflash M305 fanless computer case (White)Darkflash M305 is a meticulously designed Micro-ATX computer case that combines compact dimensions with functionality and futuristic design. It was created for users looking for good value for money, without compromising on airflow, hardware compatibility and aesthetics. A transparent side panel made of tempered glass allows you to effectively display your components, which is sure to be appreciated by fans of RGB backlighting (Red, Green, Blue, a backlighting system based on three colors: red, green and blue) or elegant kits. From now on, your gaming space will look classy and stylish!Practical solutions for everyday useThe case is equipped with a side panel made of tempered glass, fixed with convenient thumb screws. This gives you quick and easy access to the computer's interior, without the need to reach for tools. This solution works great for both hardware upgrades and regular cleaning of the cooling system. The front of the case has a modern, openwork panel with vents, which not only gives the whole case a dynamic character, but most importantly helps air circulation, protecting components from overheating.Efficient cooling systemDarkflash M305 offers a lot of freedom when planning cooling - you can fit as many as 7 120 mm fans inside. Such an arrangement allows you to build a very efficient air cooling system, which translates into stable operation of the processor, graphics card and other components, even during intensive gaming or work on graphics programs. The layout of the fans can be customized to ensure even airflow throughout the case.Compact format, big possibilitiesAlthough the case has small external dimensions (325 × 195 × 387 mm), its interior has been designed for maximum space utilization. It will easily accommodate a graphics card up to 300 mm in length and a CPU (Central Processing Unit, CPU) cooling system up to 160 mm in height. The case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, an ultra-compact motherboard format) motherboards, allowing you to choose the right configuration for both an office and gaming PC.Thoughtful interior and space for dataInside you'll find a specially designed mounting bracket that allows you to install two SSDs (Solid State Drive, solid state drive) and two traditional HDDs (Hard Disk Drive, hard drive). This arrangement gives you a lot of flexibility in scheduling your operating system, games and data storage. The entire interior has been designed with order in mind - cables can be routed aesthetically, which promotes both appearance and better cooling.Quick access to portsOn the top edge of the case is an intuitive panel of inputs and outputs, including an advanced USB 3.0 connector (Universal Serial Bus, a connector standard for powering and charging electronic devices, as well as for data transfer). It allows fast file transfer and convenient charging of mobile devices. The top location of the ports makes it convenient to use them no matter where the computer stands - on or under a desk.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305Housing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsRear: 120 mm x1; Top: 120 mm x2; Front: 120 mm x2; Bottom: 120 mm x2Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorWhiteHeight387 mmWidth195 mmDepth325 mm
The HYTE X50 is a stylish midi tower case for demanding PC enthusiasts who want to combine design and functionality. With its innovative internal structure and high-quality workmanship, it is aimed at gamers, streamers, and builders who pay attention to detail. Three-chamber layout separates heat sources for optimal airflow Supports up to ten 120 mm RGB fans for massive cooling performance 360 mm radiator support on the top and bottom for powerful water cooling Panoramic glass side panel showcases your setup Magnetic cable management system for clean builds with minimal effort HYTE X50: Innovative cooling concept with clear separation The HYTE X50 uses an intelligent three-chamber design that physically separates GPU, motherboard, and power supply. This creates unobstructed airflow, efficiently removing heat from the case. With the direct flow of fresh air to your graphics card, you can keep it cool even during graphics-intensive games or 3D rendering, continuously supplying it with air. Design meets functionality The case impresses with a curved glass side panel that elegantly highlights your system. The clear, symmetrical design is not only eye-catching but also thoughtfully engineered. Radiators up to 360 mm can be installed at the top and bottom, ensuring even high-end water cooling solutions have enough room. Modular interior and easy assembly Building your system is made extremely easy thanks to thoughtful details such as magnetically sealed cable guides, tool-free front and side panels, and flexible mounts. In addition, the front USB-C port provides ultra-fast access with up to 20 Gbit/s—ideal for modern peripherals and fast data transfers.
DarkFlash HM1 computer caseDarkFlash HM1 is a midi tower computer case that supports ATX, M-ATX and ITX format motherboards, while offering up to seven 120 mm fan slots and the ability to mount up to 360 mm of water cooling on top of the case. The internal space allows for the installation of graphics cards up to 380 mm in length and CPU coolers up to 175 mm in height. A side panel of curved tempered glass with anti-reflective coating provides a clear view of components, while the modular design and hidden cable routing system facilitate neat installation. The front features high-speed USB 3.0 and USB-C connectors, which translates into convenient support for external devices.Efficient ventilation and support for water coolingThe HM1 chassis supports the installation of up to seven 120mm fans, which translates into efficient cooling even under heavy load. Three fans each can be mounted at the front and bottom, and one (120 or 140 mm) at the rear. The top panel supports water cooling up to 360 mm. This configuration keeps the temperature inside the case stable and minimizes noise.Thoughtful component layoutThe HM1 has been designed to ensure maximum compatibility and easy installation of components. It supports ATX, M-ATX and ITX format motherboards. Inside, space is provided for three HDDs, mounted in the bottom compartment. The motherboard is installed at the rear, allowing for more orderly cable routing and better airflow.Built-in portsOn the front panel, the user has two USB 3.0 ports, a USB-C connector, two audio connectors and a power button. Such a setup makes it easy to quickly connect external devices and operate the hardware.Refined designThe case features a one-piece curved tempered glass panel with high transparency. As a result, the computer's interior remains clearly visible - the manufacturer used nano-AR coating, which reduces reflections to just 3%. The magnetic top panel can be easily removed, making it easy to install fans and clean the case. Modular cable design and a hidden tool compartment make assembling the computer not only convenient, but also aesthetically pleasing. ManufacturerDarkflashModelHM1Housing typeMidi TowerSide panelTempered glassMotherboard standardATX, M-ATX, ITXSlots for internal drives3 × HDDExpansion card slots7 × PCIeMax graphics card length380 mmMax CPU cooling height175 mmMax number of fans7 × 120 mmFan mounting optionsTop: 3 × 120 mmRear: 1 × 120 mm or 1 × 140 mmBottom: 3 × 120 mmWater cooling mounting optionsTop: up to 360 mmNumber of fans installedno fans installedType of fansPWM 120 mmButtons and controlsPower buttonConnectors: 2 × USB 3.0; 1 × USB-C; 2 × Audio (headphones and microphone)ColorBlack and whiteHeight450 mmWidth240 mmDepth430 mmWeightapprox. 7.8 kg
Baltimore 530 Mini tower case 1x USB 3.0 + 2x USB 2.0 + HD audio ABS with hair-line & shinny finish Optional: 1 x 80mm at rear, 120mm at front PCI length/CPU cooler height: 270mm/140mm
Darkflash DS900WS ATX computer case without fans (Black)The Darkflash DS900WS ATX (Advanced Technology eXtended, a standard motherboard format) is a spacious midi tower case that supports ATX, M-ATX (Micro Advanced Technology eXtended, a smaller motherboard format) and ITX (Information Technology eXtended, a compact motherboard format) motherboards, and its interior will accommodate a graphics card up to 425 mm in length and CPU cooling up to 170 mm in height. The case allows the installation of up to 12 120 mm fans and water cooling. This makes the DS900WS ATX suitable for both gaming sets and heavy-duty PCs. The tempered glass side panel allows you to expose the computer's interior, and the presence of 7 PCI-E (Peripheral Component Interconnect Express, an interface for expansion cards) slots and space for 4 drives (2x HDD, 2x SSD) gives you ample room for expansion.Compatibility and mounting spaceThe case supports ATX, Micro ATX and ITX format motherboards, with the power supply mounted at the bottom as standard. Inside, you'll find space for two 3.5" HDDs (Hard Disk Drives) and two 2.5" SSDs (Solid State Drives) - giving you ample space for data, system and games. The user can install a graphics card up to 425 mm long and a CPU cooler up to 170 mm high. There are also 7 PCI-E slots, making it easy to expand the kit with additional cards.Advanced cooling systemThe Darkflash DS900WS ATX offers extremely extensive cooling capabilities. The chassis can accommodate up to 12 120 mm fans, allowing for effective temperature management even under intense load. It is also possible to mount water cooling - up to 240 mm in the front and up to 360 mm on the top. In addition, the rear panel of the case features a large steel ventilation mesh for effective heat dissipation.Practical portsThe top panel features all the necessary connectors: one USB 3.0 (Universal Serial Bus 3.0, a high-speed data transfer connector), two USB 2.0 ports, and an HD (High Definition Audio) audio connector for headphones and microphone. In addition, there is a power and reset button, making it easier to use the computer on a daily basis. The whole thing is designed for convenience and quick access to the most important functions.Durable construction and thoughtful interiorThe case is made of 0.5 mm SPCC (Steel, Plate, Cold Rolled, Commercial Quality - cold rolled structural steel), which ensures stability and resistance to damage. Its dimensions are 470 x 218 x 454 mm, making it compact, but still very roomy. The interior is designed in a way that makes it easier to mount components and run cables, resulting in better airflow and a more organized look. In addition, part of the right panel is made of metal mesh, which not only protects the hardware from dust, but also helps air circulation. On the other hand, the top and bottom parts of the case made of mesh further promote ventilation, and their magnetic design ensures quick and convenient installation/removal.Tempered glass and stylish designThe left side of the case features a tempered glass panel to expose the computer's interior - including fan backlighting and components. An additional wood-style accent on the front adds a subtle but original touch. ManufacturerDarkflashModelDS900WS ATXHousing typeMidi TowerSide panelTempered glassMotherboard standardATX / M-ATX / ITXPower supply standardBottom side, ATXSlots for internal drives3.5" HDD x2 / 2.5" SSD x2Expansion card slots7Max graphics card lengthHorizontal mounting: 425 mmMax CPU cooling height170 mmMax number of fans12Fan mounting optionsRear: 1x 120 mm; Top: 3x 120 mm / 2x 140 mm; Side: 2x 120 mm; Bottom: 3x 120 mm; Front: x3 120 mmWater cooling mounting optionsTop: 360 mm / 240 mm; Front: 240 mmNumber of fans installedNo fans installedType of fansINF24TButtons and controlsPower, ResetConnectorsUSB 3.0 x1, USB 2.0 x2, HD AudioMaterial0.5 mm SPCCColorBlackHeight454 mmWidth218 mmDepth470 mm
DarkFlash DS900G computer case (black)DarkFlash DS900G is a Middle Tower chassis that offers extensive functionality for demanding users. It supports ATX, Micro-ATX and ITX format motherboards, and its interior accommodates graphics cards up to 425 mm in length and CPU coolers up to 170 mm in height. The interior space is designed for easy access to components and convenient expansion. The DS900G also offers full support for various cooling systems, so it can easily handle demanding gaming or work setups.Full interior displayThe curved side panel made of transparent tempered glass allows a full view of the components installed inside. The slightly rounded surface of the glass creates a panoramic effect that sets the case apart from standard models and allows the backlighting and mounting aesthetics to be fully exposed.Effective coolingThe case is designed for optimal air circulation. It allows the installation of up to 10 120 mm fans or their combination with 2 140 mm fans on the top panel. The design provides for 3 fans on the top, 3 on the side, 1 on the back and 3 on the bottom, allowing for a very efficient cooling system. In addition, up to 360 mm of water cooling can be installed on the top panel, and up to 240 mm on the side.Optimized airflow and noise reductionThe DS900G chassis features densely spaced vents that not only improve airflow, but also effectively trap larger dust particles. The rear panel is equipped with a steel mesh that improves cooling efficiency by up to 15% while reducing noise levels by about 10%.Magnetic dust filtersThere are magnetically attached dust filters on the top and bottom of the case. As a result, they can be easily removed and cleaned without removing other components. This type of solution simplifies the daily maintenance of the computer and helps maintain optimal operating conditions for components.Various expansion possibilitiesThe interior of the chassis was designed for users who want to keep the chassis aesthetically pleasing and tidy, while still having room for all the components they need. The DS900G offers 7 PCIe slots, which gives you the freedom to mount long graphics cards and additional expansion cards. The mounting space has been planned to ensure adequate airflow, room for cable routing and the ability to quickly access critical components.Flexible disk mounting optionsDarkFlash DS900G allows the installation of 2 HDDs in 3.5" format and 2 SSDs in 2.5" format. Depending on the user's needs, various configurations are possible, such as two HDDs and one SSD or one HDD and two SSDs. This allows each user to tailor the storage layout to their own preferences and the specifics of the set.Convenient access to ports and buttonsThe case offers a practical set of ports and buttons on the front panel. The user has one USB 3.0 and two USB 2.0 ports, as well as an HD Audio connector. The front also features Power, Reset and backlight control buttons. ManufacturerDarkFlashModelDS900GHousing typeMiddle TowerSide panelTempered glassMotherboard standardATX, Micro-ATX, ITXPower supply standardATXSlots for internal drives2 × 3.5" (HDD)2 × 2.5" (SSD)Expansion card slots7 PCIe slotsMax graphics card length425 mmMax CPU cooling height170 mmMax number of fansUp to 10 120 mm fansIn addition: 2 140 mm fans (top)Fan mounting optionsTop: 3 × 120 mm or 2 × 140 mmSide: 3 × 120 mmRear: 1 × 120 mmBottom: 3 × 120 mmWater cooling mounting optionsTop: up to 360 mm or 240 mmSide: up to 240 mmNumber of fans installedNo fans installedButtons and controlsPower, ResetConnectors1 × USB 3.02 × USB 2.01 × HD AudioMaterialSPCC 0.5 mmColorBlackHeight454 mmWidth218 mmDepth434 mm
The APNX V1-W Mid-Tower case with wood paneling is designed to deliver exceptional performance and elegant aesthetics. Its dual-chamber structure, complemented by a 45° angled intake design, enhances airflow efficiency for both GPU and CPU. It supports GPUs up to 395 mm and CPU coolers up to 170 mm, featuring 10 fan slots for extensive cooling potential. The adjustable motherboard mechanism and dual-chamber structure improve cooling efficiency and cable management, while quick-release cooling brackets and removable magnetic filters ensure easy installation and maintenance. The APNX V1 features fully tempered glass on the front and sides for a panoramic view, making it perfect for gamers who seek both functionality and style.
