Kompaktes Mini-ITX-Gehäuse von Raijintek, aus eloxiertem Aluminium, Silber mit schwarzem Innenraum und Rückseite, Zwei Seitenteile aus Temperglas für tiefe Einblicke, für Mini-ITX-Mainboards und kleiner, 2x 2,5"- & 2x 2,5/3,5"-Slots, GPUs bis 28 cm & CPU-Kühler bis 13,5 cm
Internal 2x 2.5 "/3.5" (transverse, drive rails), 1x 2.5 "/3.5", 4x 2.5 ", Front I / O 2x USB-A 3.0, 1x microphone, 1x headphones, PCI slots 10 (3x riser card), Fan (front) 1x 140mm (RGB illuminated) or 3x 140mm (optional), Fan (rear) 1x 140mm (RGB illuminated), Fan (top) 2x 140mm (optional), Radiator sizes 120/240/280 / 360mm in front, 120 / 240mm above, 120mm in the back, Mainboard up to ATX (E-ATX with unknown dimensions possible), Supported mainboards Mini-ITX (6.7 "x6.7") / µATX (9.6 "x9.6") / ATX (12 "x9.6") / E-ATX (unknown dimensions), Power supply ATX (max. 233mm deep), PSU position below, CPU cooler max. 180mm height, Graphics cards max. 387mm (without radiator), Color black, inside black, Lighting RGB header 3-pin ARGB (+ 5V / DATA / GND), integrated LED control, integrated RGB-LED lighting, illuminated fans, Dimensions (WxHxD) 230x502x491mm, Volume 56.69l, Enclosure type miditower, Special features Cable management, dust filter, graphics card holder, incl. Fan control, viewing window made of glass, Note Mainboard and case manufacturers refer to different dimensions as E-ATX. This manufacturer does not provide any information on supported E-ATX dimensions. Mainboards with E-ATX / SSI EEB dimensions of 305x330mm or 12 "x13" may not be supported, w/o psu, AEROPGSVISOR-G-BK-V1
4x 120mm A-RGB Rainbow fans pre-installed - Front mesh design for high airflow - Slide-in TEMPERED GLASS side panel - 3PIN +5V A-RGB M/B Sync via RGB control hub
Optimized Airflow Design RGB Fusion with ARGB Connector Hub Support Motherboards up to E-ATX Up to 360mm Liquid Cooling Compatible Support Vertical GPU Installation Full-Size Tempered Glass Side Panel With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel Pre-installed 4 ARGB fans C301 GLASS WHITE CPU Height : 170mm GPU Length : 400mm PSU Length : 180mm, MidiTower PSU Not included, Front : 120mm x3 (ARGB); Rear : 120mm x1 (ARGB) Dimensions H=486 W=220 D=473 mm
Tootekood: Z10 DUO WHITEGTIN: 8809213766121Korpused
Zalman Z10 DUO MID ATX Case with Tempered Glass and Full Mesh Front Panel - White The Zalman Z10 DUO ATX-Midi case combines modern design, exceptional functionality, and outstanding cooling performance. With its elegant white finish, a panoramic tempered glass side panel, and a mix of full mesh and tempered glass on the front, the Z10 DUO provides the perfect foundation for premium builds and high-performance gaming systems. Pre-installed are four Infinity Mirror ARGB fans that deliver stunning lighting effects. The included ARGB controller with 6 ports allows for easy lighting control and customization of your setup. All air filters can be effortlessly removed for cleaning thanks to a convenient sliding mechanism or magnetic holders. Whether as the centerpiece of your gaming rig or as a stylish case for your custom system, the Zalman Z10 DUO leaves nothing to be desired. Key Features of the Zalman Z10 DUO Case: Panoramic Tempered Glass Side Panel: Showcase your hardware with a clear view of the internal components—perfect for RGB lighting and high-end builds. Full Mesh Front Panel: Maximizes airflow and enhances cooling performance, ideal for demanding applications. Front Tempered Glass: Behind the glass panel, the pre-installed Zalman Infinity Mirror ARGB fans shine brilliantly. Spacious ATX Format: Compatible with ATX, Micro-ATX, and Mini-ITX motherboards, offering space for extensive high-end components. Coolers up to 173mm: The Z10 DUO supports air coolers with a height of up to 17.3cm! Optimized Cooling: Three pre-installed Zalman 120mm Infinity Mirror ARGB fans in the front and one 120mm ARGB fan in the rear ensure efficient heat dissipation. Elegant White Design: Timeless and modern, it fits seamlessly into any environment while giving your system a professional appearance. Additional Advantages: Support for water cooling systems and large GPU installations. Clean cable management with intelligent routing options. Space for multiple drives and SSDs to optimize storage options. The Zalman Z10 DUO in white is the ideal choice for PC enthusiasts, gamers, and system builders who value aesthetics, functionality, and quality. With its thoughtful interior layout and optimized cooling, the Z10 DUO is the perfect foundation for your stylish PC build. Discover it now and lay the groundwork for your ultimate gaming setup!
Well-equipped Midi-Tower, front and side panels made of Tempered Glass, left side panel and top with ventilation slots, space for up to 9x 120mm or 6x 140mm fans, GPU length of up to 420 mm, ARGB strip on the front, up to two power supplies possible
The Jonsbo D41 Screen ATX case in black is a sleek and versatile option for building a computer. Its closed front design makes for a silent build and it features an integrated 8-inch display. The case is made with tempered glass and can accommodate up to 8 fans and 3 radiators. It can also fit GPUs up to 400mm in length and has a movable power supply for optimal space allocation.
Compact dual-chamber midi-tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case cover for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 on the front panel
Tootekood: P30 AIR BlackGTIN: 8809213766596Korpused
Zalman P30 Air micro-ATX case with tempered glass and mesh front - black The Zalman P30 Air micro-ATX case in black offers the perfect balance between design and functionality. With a mesh front for maximum air circulation and a tempered glass side panel, this case enables both excellent cooling and a stylish presentation of your hardware. Main features of the Zalman P30 Air case: Tempered glass side panel : Presents your components in an elegant frame and allows a fascinating view of the interior. Mesh front for optimal cooling : The air-permeable front maximizes ventilation and supports a cool system, even under high load. Compact micro-ATX size : Designed for micro-ATX and mini-ITX motherboards, ideal for space-saving, high-performance builds. Elegant black design : Fits into any environment and offers a modern, professional look. The Zalman P30 Air case in black is ideal for anyone looking for a powerful and well-cooled system in a compact and stylish case. The combination of mesh front and tempered glass makes it the perfect choice for demanding PC builds that are designed for aesthetics and performance.
Black E-ATX case for NAS, supports up to twelve 3.5-inch HDDs and four 2.5-inch SSDs, eight expansion slots, compatible with graphics cards up to 350 mm in length, CPU coolers up to 160 mm in height, front I/O with 1x USB Type-C, 1x USB Type-A, and a 3.5 mm jack
CG580 4F WH The CG580 4F WH is a picturesque single-chamber case crafted to elegantly display the most commonly used components. Equipped with 4 ARGB fans, support for 360mm radiators, and multiple fan configurations, it combines style with exceptional functionality. The design features a no A-pillar construction, along with glass side and front panels offering a 270°view, allowing builders to fully appreciate their hardware.
White case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Space for graphics cards up to 460 mm and CPUs with a height of up to 170 mm Installation of up to nine SSDs provides extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that impresses not only with its variety of hardware possibilities but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to earn true admiration. With the LUCA L70, you are perfectly equipped to build your gaming PC exactly the way you want. This midi-tower not only offers you more than enough space to cool your hardware, but it can also be easily disassembled and reassembled. Building your high-end system has never been so easy! Comprehensive cooling options for your new build When you assemble your own PC, cooling is one of the most important points to consider. The LUCA L70 allows you to install up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that in this configuration, the power supply must be mounted on the top of the case. If you prefer to mount the PSU at the bottom, three fans can be installed on the top, and only one on the bottom. Water cooling enthusiasts won't be disappointed either: radiators up to 420 mm can be installed in several places. If the PSU is mounted on the top, you can fit a radiator up to 240 mm there and up to 360 mm at the bottom. If the PSU is mounted at the bottom, there is room for a 420 mm radiator on both the top and the side. To prevent dust from accumulating unnecessarily inside the case, there are dust filters on the top and the bottom. This ensures significantly longer hardware lifespan and saves you time and annoying cleaning. Thanks to the numerous options for installing fans and radiators, efficient cooling is guaranteed, ensuring your high-end hardware always operates at peak performance. Additionally, the tower stands 4 mm off the ground on X-shaped legs, further improving airflow. Case for powerful hardware To ensure even the most demanding games run smoothly on high settings, the LUCA L70 supports powerful graphics cards up to 460 mm in length. An included GPU bracket ensures the card doesn't suffer due to gravity. Vertical installation of the graphics card is also possible, but the necessary accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX and up to 280 mm wide. To avoid messy cabling, motherboards with rear connectors are also supported when the PSU is in the top position, but only in ATX or Micro-ATX format. The CPU height should not exceed 170 mm, while the power supply should be a maximum of 190 mm long. To ensure enough storage for your programs and games, up to nine 2.5-inch drives can be mounted on the side in the LUCA L70. Toolless assembly and disassembly To make installing and swapping your hardware as easy as possible, the LUCA L70 is designed to be completely modular. The front, side, and other parts can be removed and reassembled without additional tools. The motherboard tray can also be repositioned, allowing you to install the motherboard, CPU, and CPU cooler independently of each other.
