Flatpack assemblyFully modular designBuilt-in vertical GPU mountFull-sized specs, pint-sized bodyHighly customizableAccessory ecosystemFLATPACK ASSEMBLYBesides the clear eco-benefits, we believe flat-packing will provide a fun and satisfying build experience. Welcome to the future of PC DIY.FULLY MODULARFeatures modular panels that simplify and streamline the usual case prep process. Every panel is separately removable for easy maintenance.HIGHLY CUSTOMIZABLEAn unprecedented level of customizability allows for full creative expression.SWAPPABLE SIDE PANELSThe symmetric design allows you to switch the steel panel and the glass panel with each other for a non-transparent build.FULL-SIZED SPECS, PINT-SIZED BODYThe Qube 500 can house almost anything you would expect from a larger case, from EATX Motherboards and the latest GPUs to dual 280mm radiators.BUILD AS YOU UNBOXFrom the moment you open the box, the build begins with fun and easy step-by-step instructions.HARDWARE COMPATIBILTYThe Qube 500 is compatible with 280mm water coolers, 172mm air coolers, 173mm ATX PSUs, E-ATX motherboards and smaller, and 360mm GPUs.STORAGE COMPATIBILITYThe Qube 500 provides up to 4x 3.5 HDD mounting positions and up to 3x 2.5 SSD mounting positions.
Tootekood: D41 MESH BLACK SCGTIN: 6970620552590Korpused
Elegant and versatile ATX case, front with mesh for optimal airflow, with integrated 8-inch display, tempered glass side panel, support for up to 8 fans and 3 radiators, for GPUs with max 400mm length, adjustable power supply for optimal space allocation
Full mesh construction on the front ensures optimal ventilation The sense of unity between the front mesh and the tempered glass on the side panel creates a unique Zalman design. Exceptional airflow Designed for optimal air intake with a full mesh front panel and pre-installed addressable RGB fans allows for optimal and maximum airflow. High performance addressable RGB fan The mesh front panel and RGB fans provide optimal airflow and stunning RGB lighting effects (supports up to 8 fans). ARGB controller Press the LED I/O button to change the LED pattern and color (26 patterns) Press and hold the LED button for 3 seconds to sync the motherboard after the white light flashes once Press and hold the LED button for 6 seconds to turn off the LED after the white light flashes twice Press the LED button again to disconnect the motherboard sync and change the controller mode Magnetic dust filter Protects components and ensures unobstructed airflow by filtering dust. Bottom dust filter Protects the power supply from dust accumulation. Easy-to-use hinged glass side panel A hinged glass panel provides easy access to the interior.
Riesiger Big-Tower aus Stahl und Aluminium, drei Installations-Modi, duales System möglich, 16x Lüfter möglich, vier Radiatoren bis zu 480 mm, RGB-Beleuchtung und USB Typ C
The CORSAIR iCUE LINK 3500X RGB mid-tower case is designed for enthusiasts seeking a high-performance, aesthetically pleasing PC build. With its versatile cooling options, it supports multiple fan and radiator configurations, ensuring that your components stay cool under heavy load. The case is designed to be compatible with a broad range of motherboards, from Mini-ITX to Extended ATX, making it a suitable choice for builders planning to upgrade their system. The elegant tempered-glass panels on the side and front not only allow you to showcase your RGB components but also elevate the overall look of your setup. Additionally, the case features comprehensive dust filtration and high-speed connection options, including USB-C 3.2 Gen 2, making it a suitable contender for gamers and professionals.
ATX case with 270° glass panel, up to ten fans possible, GPUs up to 420 mm / CPU up to 165 mm height, up to three drives possible, radiator up to 360 mm, 1x USB-C / 2x USB-A
Nanoxia DS-9ARGB-W. Formfaktor: Midi Tower, Type: PC, Produktfarve: Hvid. Understøttede diametre for frontventilatorer: 120,140 mm, Understøttede diametre for bagerste ventilatorer: 120,140 mm, Understøttede diametre for øverste ventilatorer: 120,140 mm. Understøttede HDD-størrelser: 3.5", SSD-formfaktor: 2.5". Bredde: 215 mm, Dybde: 460 mm, Højde: 455 mm
Elegant black midi-tower, discreet design made of aluminum and steel, tempered glass side panel, for E-ATX motherboards (max. 305 x 285 mm), space for a maximum 360mm radiator in the top, graphics cards up to 330 mm, 4x 2.5-inch or 2x 2.5/3.5-inch data carriers.
Well-equipped Midi-Tower, front and side panel made of Tempered Glass, left side panel and top with ventilation slots, 6x 140mm ARGB PWM fans pre-installed, GPU length of up to 420 mm, ARGB strip on the front, up to two power supplies possible
Midi-Tower bis Micro-ATX, bis zu zehn 120-mm-Lüfter möglich, mit Wasserkühlungsoptionen, GPUs bis 430 mm, CPU-Kühler bis 180 mm Höhe, für Mainboards mit Anschlüssen auf der Rückseite
Black case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Room for graphics cards up to 460 mm and CPUs up to 170 mm in height Installation of up to nine SSDs enables extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that convinces not only with its wide range of hardware possibilities, but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to receive true admiration. With the LUCA L70, you’re perfectly equipped to assemble your gaming PC exactly as you wish. This midi-tower offers more than enough space to keep your hardware cool, and is also extremely easy to take apart and put back together. Building your high-end setup has never been so easy! Comprehensive cooling options for your new build When building your own PC, cooling is one of the most important factors to consider. The LUCA L70 allows the installation of up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that with this combination, the power supply unit must be mounted on the top of the case. If you prefer mounting the PSU on the bottom, three fans can be installed on the top and only one on the bottom. Water cooling enthusiasts will also not be disappointed: radiators up to 420 mm can be installed in several locations. If the power supply is on the top, only a 240 mm radiator is possible there and a maximum 360 mm radiator on the bottom. If you mount the PSU at the bottom, there is room for a 420 mm radiator on the top as well as on the side. To prevent unnecessary dust buildup inside the case, there are dust filters on the top and bottom. This ensures a much longer lifespan for your hardware and saves you time and annoying cleaning. Thanks to the many options for installing fans and radiators, effective cooling is ensured so your high-end hardware always performs at its peak. In addition, the tower stands 4 mm above the ground on X-shaped legs, which further improves airflow. Case for powerful hardware So you can play even the most demanding games smoothly at high settings, the LUCA L70 accommodates a high-performance graphics card up to 460 mm in length. An included GPU bracket ensures it’s not subject to gravity. Vertical GPU installation is also possible—appropriate accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX with a width of up to 280 mm. To avoid cable clutter, it also supports motherboards with back-facing connectors when the PSU is on top, but only in ATX or micro-ATX format. The CPU height must not exceed 170 mm, and the power supply should be no longer than 190 mm. For plenty of storage for your programs and games, you can attach up to nine 2.5-inch drives to the side of the LUCA L70. Tool-free assembly and disassembly To make installing and swapping hardware as easy as possible, the LUCA L70 is fully modular. The front, side, and other parts can be taken apart and reassembled without any additional tools, plus the motherboard tray can be moved so you can install the motherboard, CPU, and CPU cooler independently.
White case with 270° tempered glass side panel Optimal cooling options with up to nine fans and radiators up to 420 mm Spacious interior for versatile high-end motherboards up to E-ATX Space for graphics cards up to 460 mm and CPUs with a height of up to 170 mm Installation of up to nine SSDs provides extensive storage options Supports motherboards with back-connect (ATX, mATX) Modular design simplifies assembly The TRYX LUCA L70: Midi-Tower for gaming PCs with maximum power The TRYX LUCA L70 is a large midi-tower that impresses not only with its variety of hardware possibilities but also with its timeless design that fits into any setup. The tempered glass on the front and side puts your high-end build in the spotlight—ready to earn true admiration. With the LUCA L70, you are perfectly equipped to build your gaming PC exactly the way you want. This midi-tower not only offers you more than enough space to cool your hardware, but it can also be easily disassembled and reassembled. Building your high-end system has never been so easy! Comprehensive cooling options for your new build When you assemble your own PC, cooling is one of the most important points to consider. The LUCA L70 allows you to install up to nine fans: two 120 mm or 140 mm fans on the top, three 120 mm or 140 mm fans on the side, three 120 mm or 140 mm fans on the bottom, and one 120 mm fan at the rear. Note that in this configuration, the power supply must be mounted on the top of the case. If you prefer to mount the PSU at the bottom, three fans can be installed on the top, and only one on the bottom. Water cooling enthusiasts won't be disappointed either: radiators up to 420 mm can be installed in several places. If the PSU is mounted on the top, you can fit a radiator up to 240 mm there and up to 360 mm at the bottom. If the PSU is mounted at the bottom, there is room for a 420 mm radiator on both the top and the side. To prevent dust from accumulating unnecessarily inside the case, there are dust filters on the top and the bottom. This ensures significantly longer hardware lifespan and saves you time and annoying cleaning. Thanks to the numerous options for installing fans and radiators, efficient cooling is guaranteed, ensuring your high-end hardware always operates at peak performance. Additionally, the tower stands 4 mm off the ground on X-shaped legs, further improving airflow. Case for powerful hardware To ensure even the most demanding games run smoothly on high settings, the LUCA L70 supports powerful graphics cards up to 460 mm in length. An included GPU bracket ensures the card doesn't suffer due to gravity. Vertical installation of the graphics card is also possible, but the necessary accessories must be purchased separately. The midi-tower is compatible with motherboards up to E-ATX and up to 280 mm wide. To avoid messy cabling, motherboards with rear connectors are also supported when the PSU is in the top position, but only in ATX or Micro-ATX format. The CPU height should not exceed 170 mm, while the power supply should be a maximum of 190 mm long. To ensure enough storage for your programs and games, up to nine 2.5-inch drives can be mounted on the side in the LUCA L70. Toolless assembly and disassembly To make installing and swapping your hardware as easy as possible, the LUCA L70 is designed to be completely modular. The front, side, and other parts can be removed and reassembled without additional tools. The motherboard tray can also be repositioned, allowing you to install the motherboard, CPU, and CPU cooler independently of each other.
Effective M.2 cooler for M.2 SSDs in 2280 format, prevents thermal throttling, compatible with single/double-sided M.2 2280 SSDs, four 4-mm copper heatpipes
