Midi-Tower-Gehäuse, mit Seitenteil aus Tempered Glass, sehr guter Airflow dank Vorderseite aus Mesh, bietet zwei ARGB-Strips an Front und Seite, drei integrierte ARGB-PWM-Lüfter, ARGB-Controller inklusive
Optimized Airflow Design RGB Fusion with ARGB Connector Hub Support Motherboards up to E-ATX Up to 360mm Liquid Cooling Compatible Support Vertical GPU Installation Full-Size Tempered Glass Side Panel With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel Pre-installed 4 ARGB fans C301 GLASS CPU Height : 170mm GPU Length : 400mm PSU Length : 180mm, MidiTower PSU Not included, Front : 120mm x3 (ARGB); Rear : 120mm x1 (ARGB) Dimensions H=486 W=220 D=473 mm
Midi-Tower PC case, tempered glass side panel, mesh front, 5x Kolink Umbra ARGB PWM fans, supports GPUs up to 330 mm, power supply shroud, compatible with ATX motherboards
Showcase case by Phanteks, with side panel and front made of Tempered Glass, supports up to 12x 120mm or 11x 140mm fans, up to four radiators at the same time, motherboards up to E-ATX and GPUs up to 490 mm, D-RGB strips and controller included
Tootekood: AIR 100 ARGB WHGTIN: 4710562745252Korpused
Compact airflow case from Montech, for Mini-ITX and Micro-ATX motherboards, supports radiators up to 280 mm, side panel made of tempered glass with hinges, four pre-installed ARGB fans
The Jonsbo D31 MESH mATX case is a sleek and versatile option for building a powerful computer. Its front mesh design allows for optimal airflow and its tempered glass side panel adds a touch of elegance. The case can accommodate up to 8 fans and 3 radiators, and can fit GPUs up to 400mm in length. The versatile layout allows for a customizable and optimized use of space.
The DIGITUS wall-mounted data communications cabinet is equipped with a glazed door and a cable gland in the roof and floor. The steel structure is made of steel sheet up to 1.5 mm thick. It is possible to change the side of the door hinges and adjust the depth. The rack cabinets are delivered unassembled, in a flat package. Assembly is carried out in a few simple steps thanks to the enclosed "step-by-step" instructions. Installation cabinet supplied unassembled Quick installation Door opening angle: 200° 1-point locking on front door 483 mm (19") rack profiles mounted at the front inside the cabinet, galvanized 483 mm (19") rack profiles with depth adjustment 1.1-1.5 thick, high-strength sheet steel, powder-coated Cable inlet with brush strip in the roof and plastic cover in the floor Ventilation slots for active and passive air supply and exhaust Front door: glass, single Side panels: on two sides Assembled: no
Versatile midi-tower, front and side panel made of tempered glass, large mesh areas on the left side panel and lid, 2x 140mm & 1x 120mm ARGB PWM fans pre-installed, GPU length of up to 420mm, CPU cooler height up to 175mm
Compact white mini-caseUp to five fans and breathable mesh ensure efficient airflowSupports motherboards up to Micro-ATXSpace for graphics cards up to 335 mm and CPU coolers up to 170 mm in heightConvenient carrying handle for transportThe Jonsbo C6 MAX: Portable mini-case with surprisingly ample spaceThe Jonsbo C6 MAX is a mini-case that provides enough space for high-end components despite its small size. Fans and breathable mesh on multiple sides ensure excellent airflow, efficiently cooling your hardware. Additionally, the tower is easy to transport with the practical carrying handle. If you have always wanted to take your gaming PC everywhere, the C6 MAX is worth a look!Efficient cooling with fans and radiatorsGood airflow is especially important in a small tower. Therefore, the C6 MAX can accommodate up to five fans. The top can hold either two 120 mm fans or one 140 mm fan, while the bottom can accommodate two additional 120 mm fans. The rear also supports a 120 mm fan. Together with the mesh on the top and front, this ensures that your hardware remains cool even in performance-intensive games.Space for your high-end hardwareThe mini-tower supports the installation of graphics cards up to 335 mm in size. Motherboards up to the Micro-ATX format are possible.The CPU cooler should not exceed a height of 170 mm, while the power supply can be up to 220 mm. A 2.5-inch or 3.5-inch drive can be installed for storing programs and games. Note that the fans on the bottom cannot be installed if you choose the 3.5-inch drive.
Small case for simple systems Two low-profile expansion slots for graphics card Supports ITX-sized motherboards and CPU cooler height up to 38 mm Power supply: 1U Flex up to 150 mm One USB-C port on the I/O panel The Jonsbo NV10 in detail The Jonsbo NV10 is a small case that can be placed on your desk thanks to its light weight and fits into any setup with its simple black design. You can connect an external device to the USB-C port on the I/O panel. Hardware options The mini-tower supports the installation of ITX-sized motherboards. The CPU cooler should not exceed a height of 38 mm. In addition, the two low-profile expansion slots allow for the installation of a low-profile graphics card up to 190 mm. Please note that only a 1U Flex power supply unit no larger than 150 mm can be used.
Small case for simple systems Two fans installed Supports ITX size motherboards and CPU cooler height up to 38 mm Up to four 2.5-inch SSDs possible Power supply: 1U Flex up to 150 mm The Jonsbo N10 in detail The Jonsbo N10 is a small case that can be placed on the desk due to its light weight and fits into any setup thanks to its simple silver design. Cooling The mini-tower already comes with two small fans installed, providing sufficient cooling. Additional fans cannot be installed. For this reason, the tower does not support the installation of graphics cards, as these require more cooling. Nevertheless, a processor with integrated graphics can be installed without any problems. Hardware options The mini-tower supports the installation of ITX size motherboards. The CPU cooler should not exceed a height of 38 mm. To store programs and games, up to four 2.5-inch SSDs can be installed. For the power supply, note that only a 1U Flex power supply is possible, which should not exceed 150 mm in length.
Small case for simple systems Two fans installed Supports ITX-size motherboards and CPU cooler height up to 38 mm Up to four 2.5-inch SSDs possible Power supply: 1U Flex up to 150 mm The Jonsbo N10 in detail The Jonsbo N10 is a small case that can be placed on a desk thanks to its low weight and fits into any setup with its silver, minimalist design. Cooling The mini-tower already has two small fans installed, providing sufficient cooling. Additional fans are not possible. For this reason, the tower does not support the installation of graphics cards, as they require more cooling. However, a processor with integrated graphics can be installed without any problems. Hardware options The mini-tower supports the installation of ITX-size motherboards. The CPU cooler should not exceed a height of 38 mm. For saving programs and games, up to four 2.5-inch SSDs can be installed. For the power supply, make sure only a 1U Flex unit is possible, and it should not be larger than 150 mm.
M.2 NVMe PCIe-4.0-Karte, zur Montage von M.2 SSDs in einem PCIe-Slot, integrierter Kühlkörper, bis zu 64 Gbit/s, inklusive Low-Profile Slotblende und Wärmeleitpads
Lanberg's blank patch panel is designed to be fitted with keystone modules, both network-related like RJ45, RJ11, RJ12, as well as, for audo-video-data eg. HDMI, USB, F, BNC etc.
